Queued spinlocks have shown to have good performance and fairness
properties even on smaller (2 socket) POWER systems. This selects them
automatically for 64s. For other platforms they are de-selected, the
standard spinlock is far simpler and smaller code, and single chips
with a handful of cores is unlikely to show any improvement.

CONFIG_EXPERT still allows this to be changed, e.g., to help debug
performance or correctness issues.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210118123451.1452206-1-npiggin@gmail.com

The VAS device allocates a generic interrupt to handle page faults but
the IRQ name doesn't show under /proc. This is because it's on
stack. Allocate the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org

This adds a folder per LIOBN under /sys/kernel/debug/iommu with IOMMU
table parameters.

This is enabled by CONFIG_IOMMU_DEBUGFS.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210113102014.124452-1-aik@ozlabs.ru

Only used locally. It fixes this W=1 compile error :

../arch/powerpc/platforms/pseries/eeh_pseries.c:697:5: error: no previous prototype for ‘pseries_send_allow_unfreeze’ [-Werror=missing-prototypes]
  697 | int pseries_send_allow_unfreeze(struct pci_dn *pdn,
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-24-clg@kaod.org

These are only used locally. It fixes these W=1 compile errors :

../arch/powerpc/platforms/pseries/pci.c:58:5: error: no previous prototype for ‘pseries_send_map_pe’ [-Werror=missing-prototypes]
   58 | int pseries_send_map_pe(struct pci_dev *pdev,
      |     ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:91:6: error: no previous prototype for ‘pseries_set_pe_num’ [-Werror=missing-prototypes]
   91 | void pseries_set_pe_num(struct pci_dev *pdev, u16 vf_index, __be16 pe_num)
      |      ^~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:105:5: error: no previous prototype for ‘pseries_associate_pes’ [-Werror=missing-prototypes]
  105 | int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs)
      |     ^~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:149:5: error: no previous prototype for ‘pseries_pci_sriov_enable’ [-Werror=missing-prototypes]
  149 | int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:192:5: error: no previous prototype for ‘pseries_pcibios_sriov_enable’ [-Werror=missing-prototypes]
  192 | int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:199:5: error: no previous prototype for ‘pseries_pcibios_sriov_disable’ [-Werror=missing-prototypes]
  199 | int pseries_pcibios_sriov_disable(struct pci_dev *pdev)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-23-clg@kaod.org

These are only used locally. It fixes these W=1 compile errors :

../arch/powerpc/platforms/pseries/setup.c:610:17: error: no previous prototype for ‘pseries_get_iov_fw_value’ [-Werror=missing-prototypes]
  610 | resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:646:6: error: no previous prototype for ‘of_pci_set_vf_bar_size’ [-Werror=missing-prototypes]
  646 | void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
      |      ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:668:6: error: no previous prototype for ‘of_pci_parse_iov_addrs’ [-Werror=missing-prototypes]
  668 | void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
      |      ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-22-clg@kaod.org

This fixes these W=1 compile errors:

../arch/powerpc/kvm/book3s_hv_builtin.c:425:6: error: no previous prototype for ‘kvmppc_read_intr’ [-Werror=missing-prototypes]
  425 | long kvmppc_read_intr(void)
      |      ^~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:652:6: error: no previous prototype for ‘kvmppc_bad_interrupt’ [-Werror=missing-prototypes]
  652 | void kvmppc_bad_interrupt(struct pt_regs *regs)
      |      ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:695:6: error: no previous prototype for ‘kvmhv_p9_set_lpcr’ [-Werror=missing-prototypes]
  695 | void kvmhv_p9_set_lpcr(struct kvm_split_mode *sip)
      |      ^~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:740:6: error: no previous prototype for ‘kvmhv_p9_restore_lpcr’ [-Werror=missing-prototypes]
  740 | void kvmhv_p9_restore_lpcr(struct kvm_split_mode *sip)
      |      ^~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:768:6: error: no previous prototype for ‘kvmppc_set_msr_hv’ [-Werror=missing-prototypes]
  768 | void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
      |      ^~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:817:6: error: no previous prototype for ‘kvmppc_inject_interrupt_hv’ [-Werror=missing-prototypes]
  817 | void kvmppc_inject_interrupt_hv(struct kvm_vcpu *vcpu, int vec, u64 srr1_flags)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-21-clg@kaod.org

It fixes these W=1 compile errors :

 CC [M]  arch/powerpc/kvm/book3s_64_mmu_hv.o
../arch/powerpc/kvm/book3s_64_mmu_hv.c:879:5: error: no previous prototype for ‘kvm_unmap_hva_range_hv’ [-Werror=missing-prototypes]
  879 | int kvm_unmap_hva_range_hv(struct kvm *kvm, unsigned long start, unsigned long end)
      |     ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:888:6: error: no previous prototype for ‘kvmppc_core_flush_memslot_hv’ [-Werror=missing-prototypes]
  888 | void kvmppc_core_flush_memslot_hv(struct kvm *kvm,
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:970:5: error: no previous prototype for ‘kvm_age_hva_hv’ [-Werror=missing-prototypes]
  970 | int kvm_age_hva_hv(struct kvm *kvm, unsigned long start, unsigned long end)
      |     ^~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:1011:5: error: no previous prototype for ‘kvm_test_age_hva_hv’ [-Werror=missing-prototypes]
 1011 | int kvm_test_age_hva_hv(struct kvm *kvm, unsigned long hva)
      |     ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:1019:6: error: no previous prototype for ‘kvm_set_spte_hva_hv’ [-Werror=missing-prototypes]
 1019 | void kvm_set_spte_hva_hv(struct kvm *kvm, unsigned long hva, pte_t pte)
      |      ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-20-clg@kaod.org

These are only used locally. It fixes these W=1 compile errors :

../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
 1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
 1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
 1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
 1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~

Fixes: acc9eb93 ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org

soft_nmi_interrupt() usage requires PPC_WATCHDOG to be configured.
Check the CONFIG definition to declare the prototype.

It fixes this W=1 compile error :

../arch/powerpc/kernel/watchdog.c:250:6: error: no previous prototype for ‘soft_nmi_interrupt’ [-Werror=missing-prototypes]
  250 | void soft_nmi_interrupt(struct pt_regs *regs)
      |      ^~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-18-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/mm/book3s64/pgtable.c:411:6: error: no previous prototype for ‘arch_report_meminfo’ [-Werror=missing-prototypes]
  411 | void arch_report_meminfo(struct seq_file *m)
      |      ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-17-clg@kaod.org

pseries_alloc_bootmem_huge_page() is only used locally in
alloc_bootmem_huge_page() and does not need to be external.

It fixes this W=1 compile error :

../arch/powerpc/mm/hugetlbpage.c:220:12: error: no previous prototype for ‘pseries_alloc_bootmem_huge_page’ [-Werror=missing-prototypes]
  220 | int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-16-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/mm/book3s64/slb.c:380:6: error: no previous prototype for ‘preload_new_slb_context’ [-Werror=missing-prototypes]
  380 | void preload_new_slb_context(unsigned long start, unsigned long sp)
      |      ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-15-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/mm/book3s64/hash_utils.c:1867:6: error: no previous prototype for ‘hpte_insert_repeating’ [-Werror=missing-prototypes]
 1867 | long hpte_insert_repeating(unsigned long hash, unsigned long vpn,
      |      ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-14-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/mm/book3s64/hash_utils.c:1515:5: error: no previous prototype for ‘__hash_page’ [-Werror=missing-prototypes]
 1515 | int __hash_page(unsigned long trap, unsigned long ea, unsigned long dsisr,
      |     ^~~~~~~~~~~
../arch/powerpc/mm/book3s64/hash_utils.c:1850:6: error: no previous prototype for ‘low_hash_fault’ [-Werror=missing-prototypes]
 1850 | void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc)
      |      ^~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-13-clg@kaod.org

patch_imm64_load_insns() is only used locally in
arch_prepare_optimized_kprobe() and does not need to be external.

It fixes this W=1 compile error :

../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm64_load_insns’ [-Werror=missing-prototypes]
  149 | void patch_imm64_load_insns(unsigned int val, kprobe_opcode_t *addr)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-12-clg@kaod.org

Commit 650b55b7 ("powerpc: Add prefixed instructions to instruction
data type") removed the use of patch_imm32_load_insns(). Clean it up
to fix this W=1 compile error :

../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm32_load_insns’ [-Werror=missing-prototypes]
  149 | void patch_imm32_load_insns(unsigned int val, kprobe_opcode_t *addr)

Fixes: 650b55b7 ("powerpc: Add prefixed instructions to instruction data type")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-11-clg@kaod.org

debugger_ipi_callback() is a local routine used as a NMI IPI handler and
does not need to be external.

It fixes this W=1 compile error :

../arch/powerpc/kernel/smp.c:579:6: error: no previous prototype for ‘debugger_ipi_callback’ [-Werror=missing-prototypes]
  579 | void debugger_ipi_callback(struct pt_regs *regs)
      |      ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-10-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/kernel/smp.c:569:6: error: no previous prototype for ‘tick_broadcast’ [-Werror=missing-prototypes]
  569 | void tick_broadcast(const struct cpumask *mask)
      |      ^~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-9-clg@kaod.org

It fixes these W=1 compile errors :

../arch/powerpc/kernel/mce.c:591:14: error: no previous prototype for ‘machine_check_early’ [-Werror=missing-prototypes]
  591 | long notrace machine_check_early(struct pt_regs *regs)
      |              ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/mce.c:725:6: error: no previous prototype for ‘hmi_exception_realmode’ [-Werror=missing-prototypes]
  725 | long hmi_exception_realmode(struct pt_regs *regs)
      |      ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-8-clg@kaod.org

The following routines are only called by local services and do not
need to be external symbols.

It fixes these W=1 errors :

../arch/powerpc/kernel/setup_64.c:261:13: error: no previous prototype for ‘record_spr_defaults’ [-Werror=missing-prototypes]
  261 | void __init record_spr_defaults(void)
      |             ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/setup_64.c:1011:6: error: no previous prototype for ‘entry_flush_enable’ [-Werror=missing-prototypes]
 1011 | void entry_flush_enable(bool enable)
      |      ^~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/setup_64.c:1023:6: error: no previous prototype for ‘uaccess_flush_enable’ [-Werror=missing-prototypes]
 1023 | void uaccess_flush_enable(bool enable)
      |      ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-7-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/lib/pmem.c:51:6: error: no previous prototype for ‘arch_wb_cache_pmem’ [-Werror=missing-prototypes]
   51 | void arch_wb_cache_pmem(void *addr, size_t size)
      |      ^~~~~~~~~~~~~~~~~~
../arch/powerpc/lib/pmem.c:58:6: error: no previous prototype for ‘arch_invalidate_pmem’ [-Werror=missing-prototypes]
   58 | void arch_invalidate_pmem(void *addr, size_t size)
      |      ^~~~~~~~~~~~~~~~~~~~

Fixes: 32ce3862 ("powerpc/lib: Implement PMEM API")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-6-clg@kaod.org

init_ras_hotplug_IRQ() is a local routine used by a machine init call
and it doesn't need to be external.

It fixes this W=1 compile error:

../arch/powerpc/platforms/pseries/ras.c:125:12: error: no previous prototype for ‘init_ras_hotplug_IRQ’ [-Werror=missing-prototypes]
  125 | int __init init_ras_hotplug_IRQ(void)
      |            ^~~~~~~~~~~~~~~~~~~~

Fixes: c9dccf1d ("powerpc/pseries: Enable RAS hotplug events later")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-5-clg@kaod.org

pseries_pcibios_bus_add_device() is a local routine defining the
pcibios_bus_add_device() handler of the pseries machine in
eeh_pseries_init(). It doesn't need to be external.

It fixes this W=1 compile error:

../arch/powerpc/platforms/pseries/eeh_pseries.c:46:6: error: no previous prototype for ‘pseries_pcibios_bus_add_device’ [-Werror=missing-prototypes]
   46 | void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: dae7253f ("powerpc/pseries: Add pseries SR-IOV Machine dependent calls")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-4-clg@kaod.org

The last use of 'status' was removed in 2012. Remove the variable to
fix this W=1 compile error.

../arch/powerpc/platforms/pseries/ras.c: In function ‘ras_epow_interrupt’:
../arch/powerpc/platforms/pseries/ras.c:318:6: error: variable ‘status’ set but not used [-Werror=unused-but-set-variable]
  318 |  int status;
      |      ^~~~~~

Fixes: 55fc0c56 ("powerpc/pseries: Parse and handle EPOW interrupts")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-3-clg@kaod.org

It fixes this W=1 compile error :

../arch/powerpc/mm/pgtable.c:337:8: error: no previous prototype for ‘__find_linux_pte’ [-Werror=missing-prototypes]
  337 | pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea,
      |        ^~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-2-clg@kaod.org

The hv_24x7 performance monitoring unit creates a list of supported
events from the event catalog obtained via HCALL. The hv_24x7 catalog
could also contain invalid or dummy events with names like RESERVED*.
These events do not have any hardware counters backing them. Add a
check to string compare the event names to filter such events out.

Result on power9 machine:

Before this patch:
  .....
  hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/              [Kernel PMU event]
  hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/       [Kernel PMU event]
  hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/       [Kernel PMU event]
  hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/         [Kernel PMU event]
  hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/    [Kernel PMU event]
  hv_24x7/PM_XTS_ATSD_SENT,chip=?/                   [Kernel PMU event]
  hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/               [Kernel PMU event]
  hv_24x7/RESERVED_NEST1,chip=?/                     [Kernel PMU event]
  hv_24x7/RESERVED_NEST10,chip=?/                    [Kernel PMU event]
  hv_24x7/RESERVED_NEST11,chip=?/                    [Kernel PMU event]
  hv_24x7/RESERVED_NEST12,chip=?/                    [Kernel PMU event]
  hv_24x7/RESERVED_NEST13,chip=?/                    [Kernel PMU event]
  ......

dmesg:
  [    0.000362] printk: console [hvc0] enabled
  [    0.815452] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs

After this patch:
  ......
  hv_24x7/PM_XLINK2_OUT_ODD_AVLBL_CYC,chip=?/        [Kernel PMU event]
  hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/              [Kernel PMU event]
  hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/       [Kernel PMU event]
  hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/       [Kernel PMU event]
  hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/         [Kernel PMU event]
  hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/    [Kernel PMU event]
  hv_24x7/PM_XTS_ATSD_SENT,chip=?/                   [Kernel PMU event]
  hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/               [Kernel PMU event]
  hv_24x7/TOD,chip=?/                                [Kernel PMU event]
  ......

dmesg:
  [    0.000357] printk: console [hvc0] enabled
  [    0.808592] hv-24x7: read 1530 catalog entries, created 509 event attrs (0 failures), 275 descs
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Simplify ignore_event(), minor change log formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228085204.18026-1-kjain@linux.ibm.com

In commit 8150a153 ("powerpc/64s: Use early_mmu_has_feature() in
set_kuap()") we switched the KUAP code to use early_mmu_has_feature(),
to avoid a bug where we called set_kuap() before feature patching had
been done, leading to recursion and crashes.

That path, which called probe_kernel_read() from printk(), has since
been removed, see commit 2ac5a3bf ("vsprintf: Do not break early
boot with probing addresses").

Additionally probe_kernel_read() no longer invokes any KUAP routines,
since commit fe557319 ("maccess: rename probe_kernel_{read,write}
to copy_{from,to}_kernel_nofault") and c3316525 ("powerpc: use
non-set_fs based maccess routines").

So it should now be safe to use mmu_has_feature() in the KUAP
routines, because we shouldn't invoke them prior to feature patching.

This is essentially a revert of commit 8150a153 ("powerpc/64s: Use
early_mmu_has_feature() in set_kuap()"), but we've since added a
second usage of early_mmu_has_feature() in get_kuap(), so we convert
that to use mmu_has_feature() as well.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on: c3316525 ("powerpc: use non-set_fs based maccess routines").
Link: https://lore.kernel.org/r/20201217005306.895685-1-mpe@ellerman.id.au

mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201224132446.31286-1-zhengyongjun3@huawei.com

The == operand is a bash extension, thus this will fail on Ubuntu
with:
  ./eeh-basic.sh: 89: test: 2: unexpected operator

As the /bin/sh on Ubuntu is pointed to DASH.

Use -eq to fix this posix compatibility issue.

Fixes: 996f9e0f ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com

Pull s390 cleanups from Vasily Gorbik:
 "Update defconfigs and sort config select list"

* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/Kconfig: sort config S390 select list once again
  s390: update defconfigs

Pull power management fixes from Rafael Wysocki:
 "These fix a crash in intel_pstate during resume from suspend-to-RAM
  that may occur after recent changes and two resource leaks in error
  paths in the operating performance points (OPP) framework, add a new
  C-states table to intel_idle and update the cpuidle MAINTAINERS entry
  to cover the governors too.

  Specifics:

   - Fix recently introduced crash in the intel_pstate driver that
     occurs if scale-invariance is disabled during resume from
     suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
     values made by the platform firmware (Rafael Wysocki).

   - Fix a memory leak and add a missing clk_put() in error paths in the
     OPP framework (Quanyang Wang, Viresh Kumar).

   - Add new C-states table for SnowRidge processors to the intel_idle
     driver (Artem Bityutskiy).

   - Update the MAINTAINERS entry for cpuidle to make it clear that the
     governors are covered by it too (Lukas Bulwahn)"

* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: add SnowRidge C-state table
  cpufreq: intel_pstate: Fix fast-switch fallback path
  opp: Call the missing clk_put() on error
  opp: fix memory leak in _allocate_opp_table
  MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK

* pm-cpufreq:
  cpufreq: intel_pstate: Fix fast-switch fallback path

* pm-cpuidle:
  intel_idle: add SnowRidge C-state table
  MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK

Pull SCSI fixes from James Bottomley:
 "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).

  The big core two fixes are for power management ("block: Do not accept
  any requests while suspended" and "block: Fix a race in the runtime
  power management code") which finally sorts out the resume problems
  we've occasionally been having.

  To make the resume fix, there are seven necessary precursors which
  effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
  in block is automatically a power management exempt one.

  All of the non-PM preempt cases are removed except for the one in the
  SCSI Parallel Interface (spi) domain validation which is a genuine
  case where we have to run requests at high priority to validate the
  bus so this becomes an autopm get/put protected request"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
  scsi: cxgb4i: Fix TLS dependency
  scsi: ufs: Un-inline ufshcd_vops_device_reset function
  scsi: ufs: Re-enable WriteBooster after device reset
  scsi: ufs-mediatek: Use correct path to fix compile error
  scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
  scsi: block: Do not accept any requests while suspended
  scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
  scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
  scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
  scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
  scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
  scsi: block: Introduce BLK_MQ_REQ_PM
  scsi: block: Fix a race in the runtime power management code
  scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
  scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
  scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
  scsi: ufs-pci: Fix restore from S4 for Intel controllers
  scsi: ufs-mediatek: Keep VCC always-on for specific devices
  scsi: ufs: Allow regulators being always-on
  scsi: ufs: Clear UAC for RPMB after ufshcd resets
  ...

Pull block fixes from Jens Axboe:
 "Two minor block fixes from this last week that should go into 5.11:

   - Add missing NOWAIT debugfs definition (Andres)

   - Fix kerneldoc warning introduced this merge window (Randy)"

* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
  block: add debugfs stanza for QUEUE_FLAG_NOWAIT
  fs: block_dev.c: fix kernel-doc warnings from struct block_device changes

Pull io_uring fixes from Jens Axboe:
 "A few fixes that should go into 5.11, all marked for stable as well:

   - Fix issue around identity COW'ing and users that share a ring
     across processes

   - Fix a hang associated with unregistering fixed files (Pavel)

   - Move the 'process is exiting' cancelation a bit earlier, so
     task_works aren't affected by it (Pavel)"

* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
  kernel/io_uring: cancel io_uring before task works
  io_uring: fix io_sqe_files_unregister() hangs
  io_uring: add a helper for setting a ref node
  io_uring: don't assume mm is constant across submits

Commit 436e980e ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).

Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.

Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.

Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>