- 12 Oct, 2022 1 commit
-
-
Jani Nikula authored
While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
-
- 10 Oct, 2022 8 commits
-
-
Teresa Remmet authored
Soft reset during tc_bridge_enable() is triggered by setting all available reset control bits in the SYSRST register. But as noted in the data sheet resetting the i2c-slave controller should be only done over DSI and is only useful for chip debugging. So do not set RSTI2CS (bit0). Signed-off-by:
Teresa Remmet <t.remmet@phytec.de> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Mateusz Kwiatkowski authored
PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings. This commit makes the driver actually use the proper VEC preset for this mode instead of just changing PAL subcarrier frequency. Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-25-60d38873f782@cerno.techSigned-off-by:
-
Geert Uytterhoeven authored
It is fairly common for named video modes to contain dashes (e.g. "tt-mid" on Atari, "dblntsc-ff" on Amiga). Currently such mode names are not recognized, as the dash is considered to be a separator between mode name and bpp. Fix this by skipping any dashes that are not followed immediately by a digit when looking for the separator. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-13-60d38873f782@cerno.techSigned-off-by:
-
Maxime Ripard authored
Some video= options might have a value that contains a dash. However, the command line parsing mode considers all dashes as the separator between the mode and the bpp count. Let's rework the parsing code a bit to only consider a dash as the bpp separator if it before a comma, the options separator. A follow-up patch will add a unit-test for this once such an option is introduced. Reviewed-by:
-
Maxime Ripard authored
The subconnector property was created by drm_mode_create_tv_properties(), but wasn't exposed to the userspace through the generic atomic_get/set_property implementation, and wasn't stored in any generic state structure. Let's solve this. Reviewed-by:
-
Maxime Ripard authored
There is two TV subconnector related properties registered by drm_mode_create_tv_properties(): subconnector and select subconnector. While the select subconnector property is stored in the kernel by the drm_tv_connector_state structure, the subconnector property isn't stored anywhere. Worse, the select subconnector property is stored in a field called subconnector, creating some ambiguity about which property content we're accessing. Let's rename that field to one called select_subconnector to make it move obvious what it's about. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Maxime Ripard authored
We currently have two sets of TV properties. The first one is there to deal with analog TV properties, creating properties such as the TV mode, subconnectors, saturation, hue and so on. It's created by calling the drm_mode_create_tv_properties() function. The second one is there to deal with properties that might be useful on a TV, creating the overscan margins for example. It's created by calling the drm_mode_create_tv_margin_properties(). However, we also have a drm_atomic_helper_connector_tv_reset() function that will reset the TV margin properties to their default values, and thus is supposed to be called for the latter set. This creates an ambiguity due to the inconsistent naming. We can thus rename the drm_atomic_helper_connector_tv_reset() function to drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity and hopefully make it more obvious. Acked-by:
-
Maxime Ripard authored
Since we've recently added a ton of tests, the list starts to be a bit of a mess and creates unneeded conflicts. Let's order it alphabetically. Acked-by:
-
- 08 Oct, 2022 2 commits
-
-
Thomas Zimmermann authored
Rename the atomic helper function drm_atomic_helper_check_crtc_state() to drm_atomic_helper_check_crtc_primary_plane() and only check for an attached primary plane. Adapt callers. Instead of having one big function to check for various CRTC state conditions, we rather want smaller functions that drivers can pick individually. v5: * rebase on top of udl changes Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
In drm_atomic_helper_check_crtc_state(), do not add a new plane state to the global state if it does not exist already. Adding a new plane state will result in overhead for the plane during the atomic-commit step. For the test in drm_atomic_helper_check_crtc_state() to succeed, it is important that the CRTC has an enabled primary plane after the commit. Simply testing the CRTC state's plane_mask for a primary plane is sufficient. Note that the helper still only tests for an attached primary plane. Drivers have to ensure that the plane contains valid pixel information. v5: * fix commit description (Javier) v3: * test for a primary plane in plane_mask (Ville) v2: * remove unnecessary test for plane->crtc (Ville) * inline drm_atomic_get_next_plane_state() (Ville) * acquire plane lock before accessing plane->state (Ville) Signed-off-by:
-
- 07 Oct, 2022 16 commits
-
-
Thomas Zimmermann authored
Add constants for the various commands that the driver can send to the device and update the respective helper functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add register constants for the framebuffer scanout addresses and update the related helper functions. No functional changes. v2: * extract address bytes with helper macros (Javier) * fix comments Signed-off-by:
-
Thomas Zimmermann authored
Add register constants for the video lock. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add the register constants for setting the color depth. The driver only uses 16bpp. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add constants for the registers the contain various display-mode parameters and update the mode-setting function. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Move the existing register constants to a new file in preparation of adding more of them. Renaming is intentional. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Use a damage iterator to process damage areas individually. Merging damage areas can result in large updates of unchanged framebuffer regions. As USB is rather slow, it's better to process damage areas individually and hence minimize USB-transfered data. As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into the plane's atomic_update helper. To avoid overhead and intermediate writers, we want to synchronize buffers and reserve access only once before copying damage areas of the framebuffer. v2: * clarify commit message (Javier) Signed-off-by: -
Thomas Zimmermann authored
Add drm_dev_enter() and drm_dev_exit() to the various modesetting functions that interact with the device. After hot-unplugging the device, these functions will return early. So far, the udl driver relied on USB interfaces to handle unplugging of the device. Signed-off-by:
-
Thomas Zimmermann authored
Inline a modesetting helper in the CRTC's enable function. Build the command set directly in the USB URB's buffer and drop an intermediate buffer. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace simple-KMS helpers with regular atomic-modesetting helpers. The simple-KMS helpers introduce a mid-layer abstraction without added functionality. Using regular atomic helpers makes the driver's implementation more discoverable and simplifies code sharing. The conversion effectively open-codes the simple-KMS functions and data structure within udl. No functional changes. v2: * don't use the atomic_disable plane helper Signed-off-by:
-
Thomas Zimmermann authored
Remove the empty function udl_simple_display_pipe_mode_valid() and let simple-KMS helpers accept the modes. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Move the connector next to the rest of the modesetting code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Add style fixes, better error handling and reporting, and minor clean-up changes to the connector code before moving the code to the rest of the modesetting pipeline. Signed-off-by:
-
Thomas Zimmermann authored
Set the USB control-message timeout to the USB default of 5 seconds. Done for consistency with other uses of usb_control_msg() in udl and other drivers. Signed-off-by:
-
Thomas Zimmermann authored
The sku_pixel_limit is a per-device property, similar to the amount of available video memory. Move the respective mode-valid test from the connector to the mode-config structure. Signed-off-by:
-
Thomas Zimmermann authored
Remove the _drm_ infix from struct udl_drm_connector and introduce a macro for upcasting from struct drm_connector. No functional changes. Signed-off-by:
-
- 06 Oct, 2022 1 commit
-
-
Lucas Stach authored
The tile status modifiers can be combined with all of the usual color buffer modifiers. When they are present an additional plane is added to the surfaces to share the tile status buffer. The TS modifiers describe the interpretation of the tag bits in this buffer. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de
-
- 05 Oct, 2022 5 commits
-
-
Javier Martinez Canillas authored
The drm_atomic_helper_damage_merged() helper merges all the damage clips into one rectangle. If there are multiple damage clips that aren't close to each other, the resulting rectangle could be quite big. Instead of using that function helper, iterate over all the damage clips and update them one by one. Suggested-by:
Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by:
-
Jocelyn Falempe authored
The current ast driver only supports legacy gamma interface. This also fixes a Gnome3/Wayland error which incorrectly adds gamma to atomic commit: "Page flip discarded: CRTC property (GAMMA_LUT) not found" I only tested remotely, so I wasn't able to check that it had an effect on the VGA output. But when activating "Night Light" in Gnome, ast_crtc_load_lut() is called. v2: use the same functions as mgag200. handle 16bits color mode. v3: Check gamma_lut size in atomic check. v4: revert 16bits mode, v1 was correct. make sure gamma table are set when primary plane format changes. remove rgb888 format that is not used. Signed-off-by: -
Jason Yen authored
This chip can not handle aux defer if the host directly program its aux registers to access edid/dpcd. So we need let software to handle the aux defer situation. Signed-off-by:
Jason Yen <jason.yen@paradetech.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Christian König authored
Otherwise we would crash if the job is not resubmitted. v2: fix second usage of s_fence->parent as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004132831.134986-1-christian.koenig@amd.com
-
Christian König authored
We leaked dependency fences when processes were beeing killed. Additional to that grab a reference to the last scheduled fence. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220929180151.139751-1-christian.koenig@amd.com
-
- 04 Oct, 2022 7 commits
-
-
Ville Syrjälä authored
Get rid of the confusing version_greater() stuff and simply compare edid->revision directly everwhere. Half the places already did it this way, and since we actually reject any EDID with edid->version!=1 it's a perfectly sane thing to do. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-9-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
For EDID 1.4 the first detailed timing is always preferred, for older EDIDs there was a feature flag to indicate the same. While correct, the code setting that up is rather confusing. Restate it in a slightly more straightforward manner. Reviewed-by:
-
Ville Syrjälä authored
Prefer the timing formula indicated by the range descriptor for generating the non-DMT standard timings. Previously we just used CVT for all EDID 1.4 continuous frequency displays without even checking if the range descriptor indicates otherwise. Now we check the range descriptor first, and fall back to CVT if nothing else was indicated. EDID 1.4 more or less deprecates GTF/GTF2 but there are still a lot of 1.4 EDIDs out there that don't advertise CVT support, so seems safer to use the formula the EDID actually reports as supported. For EDID 1.3 we use GTF2 if indicated (as before), and for EDID 1.2+ we now just use GTF without even checking the feature flag. There seem to be quite a few EDIDs out there that don't set the GTF feature flag but still include a GTF range descriptor and non-DMT standard timings. This to me seems to be roughly what appendix B of EDID 1.4 suggests should be done. Reviewed-by:
-
Ville Syrjälä authored
For some reason we only use the secondary GTF curve for the standard timings. Use it for inferred modes as well. Reviewed-by:
-
Ville Syrjälä authored
Extract the GTF vs. GTF2 logic into a separate function. We'll have a second user soon. Reviewed-by:
-
Ville Syrjälä authored
Since we only use the parsed vrefresh range to determine if VRR should be supported we should only accept continuous frequency displays here. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:
-
Ville Syrjälä authored
Replace a bunch of hex constants with proper definitions. Reviewed-by:
-
