- 17 Mar, 2013 4 commits
-
-
Paulo Zanoni authored
So don't read it when we hang the GPU. This solves "unclaimed register" messages. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Future-proof by adding a gen >= 7 check in addition to the !IS_HSW check from Paulo's original patch, suggested by Ben.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
So don't read it when capturing the error state. This solves some "unclaimed register" messages on Haswell when we hang the GPU. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
This solves some "unclaimed register" messages when there's a GPU hang on Haswell. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add missing IS_VLV check as spotted by Ville Syrjälä.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Our mode set sequence documentation says audio must be disabled first. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Resolve conflict since the first patch in this series isn't applied yet. Also bikeshed commit message as suggested by Ben.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 13 Mar, 2013 3 commits
-
-
Jani Nikula authored
Even if "power power" is good for grepping. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Kees Cook authored
This clarifies the comment above the access_ok check so a missing VERIFY_READ doesn't alarm anyone. v2: - rewrote comment, thanks to Chris Wilson Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: add patch history log to commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Kees Cook authored
This replaces the manual read/write routines in debugfs with the common simple attribute helpers. Doing this gets rid of repeated copy/pasting of copy_from_user and value formatting code. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Squash in follow-up fix from Kees Cook to fix u64 divides on 32bit platforms.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 11 Mar, 2013 1 commit
-
-
Mihnea Dobrescu-Balaur authored
Signed-off-by: Mihnea Dobrescu-Balaur <mihneadb@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 Mar, 2013 5 commits
-
-
Jesse Barnes authored
Allows us to detect eDP panels that may not have the hotplug pin wired up. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
It uses the same bit definitions. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Fix up a couple of places where we messed with PCH bits on VLV. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
This was omitted from commit b7884eb4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jun 4 11:18:15 2012 +0200 drm/i915: hold forcewake around ring hw init which introduced the ->has_force_wake flag. Note that this only enables the above w/a hack. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Put some interesting stuff into the empty commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 05 Mar, 2013 1 commit
-
-
Ben Widawsky authored
On error, this represents the state of the currently running context at the time it was loaded. Unfortunately, since we're hung and can't switch out the context this may not tell us too much about the most current state of the context, but does give clues about what has happened since loading. Thanks to recent doc updates, we have a little more confidence regarding what is actually in this memory, and perhaps it will help us gain more insight into certain bugs. AFAICT, the most interesting info is in the first page. To save space, we only capture the first page. In the future, we might want to dump more. Sample of the relevant part of error state: render ring --- HW Context = 0x01b20000 [0000] 00000000 1100105f 00002028 ffff0880 [0010] 0000209c feff4040 000020c0 efdf0080 [0020] 00002178 00000001 0000217c 00145855 [0030] 00002310 00000000 00002314 00000000 v2: Move error collection to the ring error code Change format of dump to not confuse intel_error_decode (Chris) Put the context error object with the others (Chris) Don't search bound_list instead of active_list (chris) v3: extract and flatten context recording (daniel) checkpatch related fixes for the copypasta in debugfs v4: bug in v3 (Daniel) - if ((ring->id == RCS) && error->ccid) + if ((ring->id != RCS) || !error->ccid) References: https://bugs.freedesktop.org/show_bug.cgi?id=55845 Reviewed-by (v2): Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Bikeshed away the redudant parenthese around ring->id != RCS] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 04 Mar, 2013 7 commits
-
-
Paulo Zanoni authored
Bits used only on HDMI mode now have HDMI_ prefix instead of SDVO_. The COLOR_FORMAT bits now have prefixes (and the 12bpc bit is for HDMI only). Notice that this patch uncovers a bug on the SDVO code: the COLOR_RANGE_16_235 bit can only be used if the port is in TMDS mode, not SDVO mode. This will have to be fixed in a later patch. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Since they're all the same register, leave all the #defines at the same place, organized by Gen and also specify which bits are used by only a specific port or encoding. Also remove a few unused duplicates and adjust indentation. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Some HDMI registers can be used for SDVO, so saying "HDMIB" should be the same as saying "SDVOB" for a given HW generation. This was not true and led to confusions and even a regression. Previously we had: - SDVO{B,C} defined as the Gen3+ registers - HDMI{B,C,D} and PCH_SDVOB defined as the PCH registers But now: - SDVO{B,C} became GEN3_SDVO{B,C} on SDVO code - SDVO{B,C} became GEN4_HDMI{B,C} on HDMI code - HDMI{B,C,D} became PCH_HDMI{B,C,D} - PCH_SDVOB is still the same thing v2: Rebase (v1 was sent in May 2012). Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Commented out and unneeded. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
v2: Actually use num_pages (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 Mar, 2013 9 commits
-
-
Ville Syrjälä authored
Kill the HSW check from the single thread force wake code. HSW uses MT force wake exclusively these days. The commit that removed HSW single thread forcewake support: commit 36ec8f87 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 18 14:44:35 2012 +0200 drm/i915: unconditionally use mt forcewake on hsw/ivb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Use the number '1' instead of FORCEWAKE_KERNEL when requesting single thread force wake since there is only one bit in the register. Using the FORCEWAKE_KERNEL name might give someone the wrong impression. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The MT forcewake ACK register also has a corresponding bit to each of the bits in the MT forcewake register. Use the define we have for the bit we care about instead of a hardcoded number. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The code is totally obvious so these comments serve no purpose. What's worse, one of them was wrong. Just remove them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The load detection code has moved around at some point, but it left a comment behind. The code now looks to be different enough to make the comment stale as well. Just remove it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The proper use of find_pll() isn't always so easy to determine from the code itself. Some documentation should help. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
to_user_ptr() simply casts a pointer passed as u64 from user space to void __user * correctly. Using this lets us get rid of all the tiresome casts. The idea came from Chris Wilson <chris@chris-wilson.co.uk>. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
So ditch that if clause from the i8xx pll update code. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Rodrigo Vivi authored
While old platforms had 3 transcoders and 3 pipes (1:1), HSW has 4 transcoders and 3 pipes. These regs were being used only by HDMI code where pipe is always the same thing as cpu_transcoder. This patch allow us to use them for DP, specially for TRANSCODER_EDP. v2: Adding HSW_TVIDEO_DIP_VSC_DATA to transmit vsc to eDP. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 21 Feb, 2013 1 commit
-
-
Ville Syrjälä authored
Caching the PIPESTAT enable bits has been deemed pointless. Just read them from the register itself. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 20 Feb, 2013 9 commits
-
-
Ville Syrjälä authored
The indentation is getting way too deep. Pull the vblank interupt handling out to separate functions. v2: Keep flip_mask handling in the main irq handler and flatten {i8xx,i915}_handle_vblank() even further. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Use the gen3 logic for handling page flip interrupts on gen4. Unfortuantely this kills the stall_check since that looks like it can easily trigger too early. With the current logic the stall check would kick in on the first vblank after the flip has been submitted to the ring. If the CS takes longer than that to process the commands in the ring, the stall check will cause the page flip to be complete too early. That doesn't sound like a very good idea. Something better should be deviced if we still need the stall check. For now, mark i915_pageflip_stall_check() as unused. v2: Fix irq enable_mask and add __always_unused (Chris Wilson) References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1116587Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
If the interrupt handler were to process a previous vblank interrupt and the following flip pending interrupt at the same time, the page flip would be completed too soon. To eliminate this race, check the live pending flip status from the ISR register before finishing the page flip. v2: Added a comment explaining the logic (by Chris Wilson) v3: Fix a typo in the comment Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
We still rely on a few LVDS bits, but restoring the enable bit can cause trouble at this point, so don't. v2: use the right mask to prevent restore (Daniel) conditionalize on KMS support (Denial) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Otherwise, if the BIOS did anything wrong, our first I915_{WRITE,READ} will give us "unclaimed register" messages. V2: Even earlier. V3: Move it to intel_early_sanitize_regs. Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=58897Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
We plan to treat GEN7_ERR_INT as an interrupt, so use this register for the checks inside I915_WRITE. This way we can have the best of both worlds: the error message with a register address and the V2: Split in 2 patches: one for the macro, one for changing the register, as requested by Ben. V3: Rebase. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
This avoids polluting i915_write##x and also allows us to reuse code on i915_read##x. v2: Rebase v3: Convert the macros to static functions Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Some (but not all) of the HDMI registers can be used to control sDVO, so those registers have two names. IMHO, when we're talking about HDMI, we really should call the HDMI control register "hdmi_reg" instead of "sdvox_reg", otherwise we'll just confuse people reading our code (we now have platforms with HDMI but without SDVO). So now "struct intel_hdmi" has a member called "hdmi_reg" instead of "sdvox_reg". Also, don't worry: "struct intel_sdvo" still has a member called "sdvo_reg". v2: Rebase (v1 was sent in May 2012). Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
This way we can remove some duplicated code and avoid more mistakes and regressions with these registers in the future. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-