- 14 Dec, 2015 22 commits
-
-
Bjørn Mork authored
commit 59536da3 upstream. The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by:
Muri Nicanor <muri+libqmi@immerda.ch> Tested-by:
Martin Hauke <mardnh@gmx.de> Fixes: e7181d00 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit 24dd2f64 upstream. Avoids spew on resume for systems where sysfs may fail even on init. bug: https://bugzilla.kernel.org/show_bug.cgi?id=106851Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Michel Dänzer authored
commit 96ea47c0 upstream. They reportedly cause random GPU hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91268Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Imre Deak authored
commit fd0fe6ac upstream. After Damien's D3 fix I started to get runtime suspend residency for the first time and that revealed a breakage on the set_caching IOCTL path that accesses the HW but doesn't take an RPM ref. Fix this up. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446665132-22491-1-git-send-email-imre.deak@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
David Woodhouse authored
commit 1bcb49e6 upstream. The Honeywell HGI80 is a wireless interface to the evohome connected thermostat. It uses a TI 3410 USB-serial port. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Aleksander Morgado authored
commit e07af133 upstream. Also known as Verizon U620L. The device is modeswitched from 1410:9020 to 1410:9022 by selecting the 4th USB configuration: $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4 This configuration provides a ECM interface as well as TTYs ('Enterprise Mode' according to the U620 Linux integration guide). Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Petr Štetiar authored
commit 9d5b5ed7 upstream. It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by:
Petr Štetiar <ynezz@true.cz> [johan: rename define and add comment ] Signed-off-by:
-
Jani Nikula authored
commit 1b9448b0 upstream. Unsurprisingly macbooks have backlights, just the VBT doesn't seem to know it in this case. Reported-and-tested-by:
Daniel Nicoletti <dantti12@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88325 Fixes: c675949e ("drm/i915: do not setup backlight if not available according to VBT") Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
Corey Minyard authored
commit 0cfec916 upstream. The timer and thread were not being started for internal messages, so in interrupt mode if something hung the timer would never go off and clean things up. Factor out the internal message sending and start the timer for those messages, too. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
Gouji, Masayuki <gouji.masayuki@jp.fujitsu.com> Signed-off-by:
-
Thomas Betker authored
commit a57f8dac upstream. The scaling factor for VREFN is 3.0/4096 (not 1.0/4096), just as for VREFP. This is not immediately obvious from the specification (Xilinx UG480), but has been confirmed by Xilinx support. Suggested-by:
Hartmut Knaack <knaack.h@gmx.de> Signed-off-by:
Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Chris Lesiak authored
commit 0d2f6fd3 upstream. The Silicon Labs Si7013, Si7020, and Si7021 family of I2C humidity and temperature sensors deliver 16 bit data high byte first. See the datasheet available at: https://www.silabs.com/Support%20Documents%2fTechnicalDocs%2fSi7020-A20.pdf But as documented in Documentation/i2c/smbus-protocol, i2c_smbus_read_word_data() expects the low byte first. Change the driver to use i2c_smbus_read_word_swapped to get correct byte order. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
Tadeusz Struk authored
commit 176155da upstream. Bugfix - don't dereference userspace pointer. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dave Hansen authored
commit ab6b5294 upstream. (This should have gone to LKML originally. Sorry for the extra noise, folks on the cc.) Background: Signal frames on x86 have two formats: 1. For 32-bit executables (whether on a real 32-bit kernel or under 32-bit emulation on a 64-bit kernel) we have a 'fpregset_t' that includes the "FSAVE" registers. 2. For 64-bit executables (on 64-bit kernels obviously), the 'fpregset_t' is smaller and does not contain the "FSAVE" state. When creating the signal frame, we have to be aware of whether we are running a 32 or 64-bit executable so we create the correct format signal frame. Problem: save_xstate_epilog() uses 'fx_sw_reserved_ia32' whenever it is called for a 32-bit executable. This is for real 32-bit and ia32 emulation. But, fpu__init_prepare_fx_sw_frame() only initializes 'fx_sw_reserved_ia32' when emulation is enabled, *NOT* for real 32-bit kernels. This leads to really wierd situations where 32-bit programs lose their extended state when returning from a signal handler. The kernel copies the uninitialized (zero) 'fx_sw_reserved_ia32' out to userspace in save_xstate_epilog(). But when returning from the signal, the kernel errors out in check_for_xstate() when it does not see FP_XSTATE_MAGIC1 present (because it was zeroed). This leads to the FPU/XSAVE state being initialized. For MPX, this leads to the most permissive state and means we silently lose bounds violations. I think this would also mean that we could lose *ANY* FPU/SSE/AVX state. I'm not sure why no one has spotted this bug. I believe this was broken by: 72a671ce ("x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels") way back in 2012. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Cc: fenghua.yu@intel.com Cc: yu-cheng.yu@intel.com Link: http://lkml.kernel.org/r/20151111002354.A0799571@viggo.jf.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ kamal: backport to 3.19-stable: applied to kernel/xsave.c; context ] Signed-off-by:
-
Dave Hansen authored
commit 46561c39 upstream. When you call get_user(foo, bar), you effectively do a copy_from_user(&foo, bar, sizeof(*bar)); Note that the sizeof() is implicit. When we reach out to userspace to try to zap an entire "bounds table" we need to go read a "bounds directory entry" in order to locate the table's address. The size of a "directory entry" depends on the binary being run and is always the size of a pointer. But, when we have a 64-bit kernel and a 32-bit application, the directory entry is still only 32-bits long, but we fetch it with a 64-bit pointer which makes get_user() does a 64-bit fetch. Reading 4 extra bytes isn't harmful, unless we are at the end of and run off the table. It might also cause the zero page to get faulted in unnecessarily even if you are not at the end. Fix it up by doing a special 32-bit get_user() via a cast when we have 32-bit userspace. Signed-off-by:
-
Dave Hansen authored
commit 54587653 upstream. Currently, to get from a bounds directory entry to the virtual address of a bounds table, we simply mask off a few low bits. However, the set of bits we mask off is different for 32-bit and 64-bit binaries. This breaks the operation out in to a helper function and also adds a temporary variable to store the result until we are sure we are returning one. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave@sr71.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150607183704.007686CE@viggo.jf.intel.comSigned-off-by:
-
Dave Hansen authored
commit b0e9b09b upstream. The uprobes code has a nice helper, is_64bit_mm(), that consults both the runtime and compile-time flags for 32-bit support. Instead of reinventing the wheel, pull it in to an x86 header so we can use it for MPX. I prefer passing the 'mm' around to test_thread_flag(TIF_IA32) because it makes it explicit where the context is coming from. Signed-off-by:
-
Dave Hansen authored
commit a1149fc8 upstream. When we allocate a bounds table, we call mmap(), then add a "valid" bit to the value before storing it in to the bounds directory. If we fail along the way, we go and mask that valid bit _back_ out. That seems a little silly, and this makes it much more clear when we have a plain address versus an actual table _entry_. Signed-off-by:
-
Lars-Peter Clausen authored
commit 785171fd upstream. While the datasheet for the AD7785 lists 0xXB as the product ID the actual product ID is 0xX3. Fix the product ID otherwise the driver will reject the device due to non matching IDs. Fixes: e786cc26 ("staging:iio:ad7793: Implement stricter id checking") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit 5dcbe97b upstream. The ad5629/ad5669 are the I2C variant of the ad5628/ad5668, which has a SPI interface. They are mostly identical with the exception that the shift factor is different. Currently the driver does not take care of this difference which leads to incorrect DAC output values. Fix this by introducing a custom channel spec for the ad5629/ad5669 with the correct shift factor. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
-
Michael Hennerich authored
commit 03fe472e upstream. i2c_master_send() returns the number of bytes transferred on success while the ad5064 driver expects that the write() callback returns 0 on success. Fix that by translating any non negative return value of i2c_master_send() to 0. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 01bb70ae upstream. If common clock framework is configured, the driver generates a warning, which is fixed by this change: root@devkit3250:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw ------------[ cut here ]------------ WARNING: CPU: 0 PID: 724 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx snd_soc_uda1380 CPU: 0 PID: 724 Comm: cat Not tainted 4.3.0-rc2+ #198 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_read_raw+0x38/0x80) [<>] (lpc32xx_read_raw) from [<>] (iio_read_channel_info+0x70/0x94) [<>] (iio_read_channel_info) from [<>] (dev_attr_show+0x28/0x4c) [<>] (dev_attr_show) from [<>] (sysfs_kf_seq_show+0x8c/0xf0) [<>] (sysfs_kf_seq_show) from [<>] (kernfs_seq_show+0x2c/0x30) [<>] (kernfs_seq_show) from [<>] (seq_read+0x1c8/0x440) [<>] (seq_read) from [<>] (kernfs_fop_read+0x38/0x170) [<>] (kernfs_fop_read) from [<>] (do_readv_writev+0x16c/0x238) [<>] (do_readv_writev) from [<>] (vfs_readv+0x50/0x58) [<>] (vfs_readv) from [<>] (default_file_splice_read+0x1a4/0x308) [<>] (default_file_splice_read) from [<>] (do_splice_to+0x78/0x84) [<>] (do_splice_to) from [<>] (splice_direct_to_actor+0xc8/0x1cc) [<>] (splice_direct_to_actor) from [<>] (do_splice_direct+0xa0/0xb8) [<>] (do_splice_direct) from [<>] (do_sendfile+0x1a8/0x30c) [<>] (do_sendfile) from [<>] (SyS_sendfile64+0x104/0x10c) [<>] (SyS_sendfile64) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Bhuvanchandra DV authored
commit 6219f432 upstream. Calculate ADCR_VTEMP25 using VTEMP25 at VREFH_ADC 3V3. Existing calculations consider the typical values provided in datasheet. Those typical values are valid for VREFH_ADC at 3.0V. VTEMP25 is different for different VREFH_ADC voltages. With VREFH_ADC at 3.3V, voltage at 25°C is 0.699V. Hence update the VTEMP25 to 0.699V which gives ADCR@Temp25 as 867. Formula for finding ADCR@Temp25: ADCR@Temp25 = (ADCR@Vdd * V@TEMP25 * 10) / VDDconv ADCR@Vdd for 12-Bit ADC = 4095 VDDconv = VREFH_ADC * 10 VREFH_ADC@3.3V ADCR@Temp25 = (4095 * .699 * 10) / 33 ADCR@Temp25 ~= 867 | VREFH_ADC | V@TEMP25 | VDDconv | ADCR@Temp25 | | 3.0V | 0.696mV | 30 | 950 | | 3.3V | 0.699mV | 33 | 867 | Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
- 07 Dec, 2015 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 04 Dec, 2015 2 commits
-
-
Junichi Nomura authored
commit 2a708cff upstream. __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6 ("dm: hold suspend_lock while suspending device during device deletion") Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Kamal Mostafa authored
This reverts commit e041aad2 (which is a botched cherry-pick), to be replaced with a fixed backport. Signed-off-by:
-
- 02 Dec, 2015 1 commit
-
-
Sumit Saxena authored
commit aed335ee upstream. The DELL PERC5 controller firmware does not list tape drives in response to MR_DCMD_PD_LIST_QUERY. This causes tape drives not be exposed to the OS when connected to a PERC5 controller. This patch permits detection of tape drives connected to a PERC5 controller by exposing non-TYPE_DISK devices unconditionally. Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [ kamal: backport to 3.19-stable: context ] Signed-off-by:
-
- 01 Dec, 2015 1 commit
-
-
Roland Dreier authored
Backports of 41fc0143 ("fib_rules: fix fib rule dumps across multiple skbs") introduced a regression in "ip rule show" - it ends up dumping the first rule over and over and never exiting, because 3.19 and earlier are missing commit 053c095a ("netlink: make nlmsg_end() and genlmsg_end() void"), so fib_nl_fill_rule() ends up returning skb->len (i.e. > 0) in the success case. Fix this by checking the return code for < 0 instead of != 0. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
- 30 Nov, 2015 13 commits
-
-
Christophe JAILLET authored
commit eb8ed1eb upstream. Reference to the 'np' node is dropped before dereferencing the 'sizep' and 'basep' pointers, which could by then point to junk if the node has been freed. Refactor code to call 'of_node_put' later. Fixes: c5df3926 ("drivers/char/tpm: Add securityfs support for event log") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Peter Huewe <PeterHuewe@gmx.de> Signed-off-by:
-
Eric Dumazet authored
commit 1d6119ba upstream. This patch fixes following problems : 1) percpu_counter_init() can return an error, therefore init_frag_mem_limit() must propagate this error so that inet_frags_init_net() can do the same up to its callers. 2) If ip[46]_frags_ns_ctl_register() fail, we must unwind properly and free the percpu_counter. Without this fix, we leave freed object in percpu_counters global list (if CONFIG_HOTPLUG_CPU) leading to crashes. This bug was detected by KASAN and syzkaller tool (http://github.com/google/syzkaller) Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [ kamal: backport to 3.19-stable: rename reassembly.c ] Signed-off-by:
-
Yuchung Cheng authored
commit 9e45a3e3 upstream. Currently ca_seq_rtt_us does not use Kern's check. Fix that by checking if any packet acked is a retransmit, for both RTT used for RTT estimation and congestion control. Fixes: 5b08e47c ("tcp: prefer packet timing to TS-ECR for RTT") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
commit 161642e2 upstream. Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
-
Johannes Berg authored
commit 8ec6d978 upstream. The ifmgd->ave_beacon_signal value cannot be taken as is for comparisons, it must be divided by since it's represented like that for better accuracy of the EWMA calculations. This would lead to invalid driver RSSI events. Fix the used value. Fixes: 615f7b9b ("mac80211: add driver RSSI threshold events") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tero Kristo authored
commit 62c8c20a upstream. mcp794xx alarm registers must be written in BCD format. However, the alarm programming logic neglected this by adding one to the value after bin2bcd conversion has been already done, writing bad values to month register in case the alarm being set is in October. In this case, the alarm month value becomes 0x0a instead of the expected 0x10. Fix by moving the +1 addition within the bin2bcd call also. Fixes: 1d1945d2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips") Signed-off-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Jay Vosburgh authored
commit 40baec22 upstream. Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Peter Feiner authored
commit 956959f6 upstream. The -i flag was incorrectly listed as a short flag for --no-inherit. It should have only been listed as a short flag for --input. This documentation error has existed since the --input flag was introduced in 6810fc91 (perf trace: Add option to analyze events in a file versus live). Signed-off-by:
Peter Feiner <pfeiner@google.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com Fixes: 6810fc91 ("perf trace: Add option to analyze events in a file versus live") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Michal Kubeček authored
commit ebac62fe upstream. Both tunnel6_protocol and tunnel46_protocol share the same error handler, tunnel6_err(), which traverses through tunnel6_handlers list. For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g. in tunnel46_rcv(). Current code can generate an ICMPv6 error message with an IPv4 packet embedded in it. Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Mathieu Desnoyers authored
commit a15920be upstream. The documentation on top of __DECLARE_TRACE() does not match its implementation since the condition check has been added to the RCU lockdep checks. Update the documentation to match its implementation. Link: http://lkml.kernel.org/r/1446504164-21563-1-git-send-email-mathieu.desnoyers@efficios.com CC: Dave Hansen <dave@sr71.net> Fixes: a05d59a5 "tracing: Add condition check to RCU lockdep checks" Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Arnd Bergmann authored
commit 777d738a upstream. create_request_message() computes the maximum length of a message, but uses the wrong type for the time stamp: sizeof(struct timespec) may be 8 or 16 depending on the architecture, while sizeof(struct ceph_timespec) is always 8, and that is what gets put into the message. Found while auditing the uses of timespec for y2038 problems. Fixes: b8e69066 ("ceph: include time stamp in every MDS request") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit 7b3d770c upstream. ib_req_notify_cq(IB_CQ_REPORT_MISSED_EVENTS) returns a positive value if WCs were added to a CQ after the last completion upcall but before the CQ has been re-armed. Commit 7f23f6f6 ("xprtrmda: Reduce lock contention in completion handlers") assumed that when ib_req_notify_cq() returned a positive RC, the CQ had also been successfully re-armed, making it safe to return control to the provider without losing any completion signals. That is an invalid assumption. Change both completion handlers to continue polling while ib_req_notify_cq() returns a positive value. Fixes: 7f23f6f6 ("xprtrmda: Reduce lock contention in ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Devesh Sharma <devesh.sharma@avagotech.com> Tested-By:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Yinghai Lu authored
commit af86fa40 upstream. David reported that a T5-8 sparc system failed to boot with: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci 0000:00:01.0: can't claim BAR 15 [mem 0x100000000-0x4afffffff pref]: no compatible bridge window Note that we don't know about a host bridge aperture that contains BAR 15. OF does report a MEM64 aperture, but before this patch, pci_determine_mem_io_space() ignored it. Add support for host bridge apertures with 64-bit PCI addresses. Also set IORESOURCE_MEM_64 for PCI device and bridge resources in PCI 64-bit memory space. Sparc doesn't actually print the device and bridge resources, but after this patch, we should have the equivalent of this: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci_bus 0000:00: root bus resource [mem 0x800100000000-0x8007ffffffff] (bus address [0x100000000-0x7ffffffff]) pci 0000:00:01.0: bridge window [mem 0x800100000000-0x8004afffffff 64bit pref] [bhelgaas: changelog, URL to David's report] Fixes: d63e2e1f ("sparc/PCI: Clip bridge windows to fit in upstream windows") Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.comReported-by:
David Ahern <david.ahern@oracle.com> Tested-by:
Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
