Skip to content

L
linux
Switch branch/tag
  1. 26 Jan, 2013 2 commits
  3. 24 Jan, 2013 24 commits
  5. 22 Jan, 2013 6 commits
  7. 21 Jan, 2013 2 commits
    • Daniel Vetter's avatar
      drm/i915: clarify concurrent hang detect/gpu reset consistency · 7db0ba24
      Daniel Vetter authored 
      Damien Lespiau wondered how race the gpu reset/hang detection code is
against concurrent gpu resets/hang detections or combinations thereof.
Luckily the single work item is guranteed to never run concurrently,
so reset handling is already single-threaded.

Hence we only have to worry about concurrent hang detections, or a
hang detection firing off while we're still processing an older gpu
reset request. Due to the new mechanism of setting the reset in
progress flag and the ordering guaranteed by the schedule_work
function there's nothing to do but add a comment explaining why we're
safe.

The only thing I've noticed is that we still try to reset the gpu now,
even when it is declared terminally wedged. Add a check for that to
avoid continous warnings about failed resets, in case the hangcheck
timer ever gets stuck.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      7db0ba24
    • Daniel Vetter's avatar
      drm/i915: create a race-free reset detection · f69061be
      Daniel Vetter authored 
      With the previous patch the state transition handling of the reset
code itself is now (hopefully) race free and solid. But that still
leaves out everyone else - with the various lock-free wait paths
we have there's the possibility that the reset happens between the
point where we read the seqno we should wait on and the actual wait.

And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll
happily wait for a seqno which will in all likelyhood never signal.

In practice this is not a big problem since the X server gets
constantly interrupted, and can then submit more work (hopefully) to
unblock everyone else: As soon as a new seqno write lands, all waiters
will unblock. But running the i-g-t reset testcase ZZ_hangman can
expose this race, especially on slower hw with fewer cpu cores.

Now looking forward to ARB_robustness and friends that's not the best
possible behaviour, hence this patch adds a reset_counter to be able
to detect any reset, even if a given thread never observed the
in-progress state.

The important part is to correctly order things:
- The write side needs to increment the counter after any seqno gets
  reset.  Hence we need to do that at the end of the reset work, and
  again wake everyone up. We also need to place a barrier in between
  any possible seqno changes and the counter increment, since any
  unlock operations only guarantee that nothing leaks out, but not
  that at later load operation gets moved ahead.
- On the read side we need to ensure that no reset can sneak in and
  invalidate the seqno. In all cases we can use the one-sided barrier
  that unlock operations guarantee (of the lock protecting the
  respective seqno/ring pair) to ensure correct ordering. Hence it is
  sufficient to place the atomic read before the mutex/spin_unlock and
  no additional barriers are required.

The end-result of all this is that we need to wake up everyone twice
in a reset operation:
- First, before the reset starts, to get any lockholders of the locks,
  so that the reset can proceed.
- Second, after the reset is completed, to allow waiters to properly
  and reliably detect the reset condition and bail out.

I admit that this entire reset_counter thing smells a bit like
overkill, but I think it's justified since it makes it really explicit
what the bail-out condition is. And we need a reset counter anyway to
implement ARB_robustness, and imo with finer-grained locking on the
horizont this is the most resilient scheme I could think of.

v2: Drop spurious change in the wait_for_error EXIT_COND - we only
need to wait until we leave the reset-in-progress wedged state.

v3: Don't play tricks with barriers in the throttle ioctl, the
spin_unlock is barrier enough.

I've also considered using a little helper to grab the current
reset_counter, but then decided that hiding the atomic_read isn't a
great idea, since having it explicitly show up in the code is a nice
remainder to reviews to check the memory barriers.

v4: Add a comment to explain why we need to fall through in
__wait_seqno in the end variable assignments.

v5: Review from Damien:
- s/smb/smp/ in a comment
- don't increment the reset counter after we've set it to WEDGED. Now
  we (again) properly wedge the gpu when the reset fails.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      f69061be
  9. 20 Jan, 2013 6 commits
    • Chris Wilson's avatar
      drm/i915: Only apply the mb() when flushing the GTT domain during a finish · 97c809fd
      Chris Wilson authored 
      Now that we seem to have brought order to the GTT barriers, the last one
to review is the terminal barrier before we unbind the buffer from the
GTT. This needs to only be performed if the buffer still resides in the
GTT domain, and so we can skip some needless barriers otherwise.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      97c809fd
    • Chris Wilson's avatar
      drm/i915: Only insert the mb() before updating the fence parameter · d0a57789
      Chris Wilson authored 
      With a fence, we only need to insert a memory barrier around the actual
fence alteration for CPU accesses through the GTT. Performing the
barrier in flush-fence was inserting unnecessary and expensive barriers
for never fenced objects.

Note removing the barriers from flush-fence, which was effectively a
barrier before every direct access through the GTT, revealed that we
where missing a barrier before the first access through the GTT. Lack of
that barrier was sufficient to cause GPU hangs.

v2: Add a couple more comments to explain the new barriers
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      d0a57789
    • Daniel Vetter's avatar
      drm/i915: clear up wedged transitions · 1f83fee0
      Daniel Vetter authored 
      We have two important transitions of the wedged state in the current
code:

- 0 -> 1: This means a hang has been detected, and signals to everyone
  that they please get of any locks, so that the reset work item can
  do its job.

- 1 -> 0: The reset handler has completed.

Now the last transition mixes up two states: "Reset completed and
successful" and "Reset failed". To distinguish these two we do some
tricks with the reset completion, but I simply could not convince
myself that this doesn't race under odd circumstances.

Hence split this up, and add a new terminal state indicating that the
hw is gone for good.

Also add explicit #defines for both states, update comments.

v2: Split out the reset handling bugfix for the throttle ioctl.

v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase
error which prevented this patch from actually compiling.

v4: To unify the wedged state with the reset counter, keep the
reset-in-progress state just as a flag. The terminally-wedged state is
now denoted with a big number.

v5: Add a comment to the reset_counter special values explaining that
WEDGED & RESET_IN_PROGRESS needs to be true for the code to be
correct.

v6: Fixup logic errors introduced with the wedged+reset_counter
unification. Since WEDGED implies reset-in-progress (in a way we're
terminally stuck in the dead-but-reset-not-completed state), we need
ensure that we check for this everywhere. The specific bug was in
wait_for_error, which would simply have timed out.

v7: Extract an inline i915_reset_in_progress helper to make the code
more readable. Also annote the reset-in-progress case with an
unlikely, to help the compiler optimize the fastpath. Do the same for
the terminally wedged case with i915_terminally_wedged.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      1f83fee0
    • Daniel Vetter's avatar
      drm/i915: fix reset handling in the throttle ioctl · 308887aa
      Daniel Vetter authored 
      While auditing the code I've noticed one place (the throttle ioctl)
which does not yet wait for the reset handler to complete and doesn't
properly decode the wedge state into -EAGAIN/-EIO. Fix this up by
calling the right helpers. This might explain the oddball "my
compositor just died in a successfull gpu reset" reports. Or maybe not, since
current mesa doesn't use this ioctl to throttle command submission.

The throttle ioctl doesn't take the struct_mutex, so to avoid busy-looping
with -EAGAIN while a reset is in process, check for errors first and wait
for the handler to complete if a reset is pending by calling
i915_gem_wait_for_error.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      308887aa
    • Daniel Vetter's avatar
      drm/i915: move wedged to the other gpu error handling stuff · 33196ded
      Daniel Vetter authored 
      And to make Ben Widawsky happier, use the gpu_error instead of
the entire device as the argument in some functions.

Drop the outdated comment on ->wedged for now, a follow-up patch will
change the semantics and add a proper comment again.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      33196ded
    • Daniel Vetter's avatar
      drm/i915: extract hangcheck/reset/error_state state into substruct · 99584db3
      Daniel Vetter authored 
      This has been sprinkled all over the place in dev_priv. I think
it'd be good to also move all the code into a separate file like
i915_gem_error.c, but that's for another patch.
Reviewed-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      99584db3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7