For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.

Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.

Fixes: 43b7029f ("HID: i2c-hid: Send power-on command after reset").

Cc: stable@vger.kernel.org
Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.

To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().

Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>
Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This re-adds the suffix to Win8 stylus-on-touchscreen devices,
now that they aren't erroneously marked as MT
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This effectively changes collection_is_mt from
  contact ID in report->field
to
  (device is Win8 => collection is finger) && contact ID in report->field

Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly

Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

USB_VENDOR_ID_CORSAIR is defined twice in the same file with the same
value.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:

[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0

This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The G713 and G733 both emit an unexpected keycode on some key
presses such as Fn+Pause. The device in this case is emitting
two events on key down, and 3 on key up, the third key up event
is report ID 0x02 and is unfiltered, causing incorrect event.

This patch filters out the single problematic event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The SMbus block transaction limits the number of bytes transferred to 32,
but nothing prevents a user from specifying via ioctl a larger data size
than the ft260 can handle in a single transfer.

i2cdev_ioctl_smbus()
   --> i2c_smbus_xfer
       --> __i2c_smbus_xfer
           --> ft260_smbus_xfer
               --> ft260_smbus_write

This patch adds data size checking in the ft260_smbus_write().

Fixes: 98189a0adfa0 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We want to convert from 16 bit (unsigned) little endian values contained
in a packed struct to CPU native endian values here, not the other way
around. So replace cpu_to_le16() with get_unaligned_le16(), using the
latter instead of le16_to_cpu() to acknowledge that we are reading from
a packed struct.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b05ff100 ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add missing descriptions for KEY_ASSISTANT and KEY_KBD_LAYOUT_NEXT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.

This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.

In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.

The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.

Just like the K15A these errors are triggered by undocking and docking
the tablet.

There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:

1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while

These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Fix the return value check which testing the wrong variable
in thrustmaster_probe().

Fixes: c49c3363 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Older ROG keyboards emit a similar stream of bytes to the new
N-Key keyboards and require filtering to prevent a lot of
unmapped key warnings showing. As all the ROG keyboards use
QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering
in asus_raw_event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.

There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version.  These
keyboards are sometimes known collectively as the "GK6X" series.

The keyboard has three USB interfaces.  Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys.  If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.

(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)

The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".)  The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.
Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - Surface Aggregator Module support from Maximilian Luz

 - Apple Magic Mouse 2 support from John Chen

 - Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode
   from Hans de Goede

 - Thinkpad X1 Tablet keyboard support from Hans de Goede

 - Support for FTDI FT260 I2C host adapter from Michael Zaidman

 - other various small device-specific quirks, fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
  HID: wacom: Setup pen input capabilities to the targeted tools
  HID: hid-sensor-hub: Move 'hsdev' description to correct struct definition
  HID: hid-sensor-hub: Remove unused struct member 'quirks'
  HID: wacom_sys: Demote kernel-doc abuse
  HID: hid-sensor-custom: Remove unused variable 'ret'
  HID: hid-uclogic-params: Ensure function names are present and correct in kernel-doc headers
  HID: hid-uclogic-rdesc: Kernel-doc is for functions and structs
  HID: hid-logitech-hidpp: Fix conformant kernel-doc header and demote abuses
  HID: hid-picolcd_core: Remove unused variable 'ret'
  HID: hid-kye: Fix incorrect function name for kye_tablet_enable()
  HID: hid-core: Fix incorrect function name in header
  HID: hid-alps: Correct struct misnaming
  HID: usbhid: hid-pidff: Demote a couple kernel-doc abuses
  HID: usbhid: Repair a formatting issue in a struct description
  HID: hid-thrustmaster: Demote a bunch of kernel-doc abuses
  HID: input: map battery capacity (00850065)
  HID: magicmouse: fix reconnection of Magic Mouse 2
  HID: magicmouse: fix 3 button emulation of Mouse 2
  HID: magicmouse: add Apple Magic Mouse 2 support
  HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard
  ...

Pull sound updates from Takashi Iwai:
 "No surprises in this development cycle, and most of work is about the
  fixes and the improvements of the existing code, while a new LED
  control layer and a few new drivers have been introduced.

  Here are some highlights:

  Core:
   - A common mute-LED framework was introduced. It is used by HD-audio
     for now, more adaption will follow later. The former "Mic Mute-LED
     Mode" mixer control has been replaced with the corresponding sysfs
     now.
   - User-control management was changed to count consumed bytes instead
     of capping by number of elements; this will allow more controls in
     the normal usage pattern while avoiding the possible memory
     exhaustion DoS

  ASoC:
   - Continued refactoring and cleanups in ASoC core and generic card
     drivers
   - Wide range of small cppcheck and warning fixes
   - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
     accessory detection, and Realtek RT1019, RT1316, RT711 and RT715

  USB-audio:
   - Continued improvements and fixes of the implicit feedback mode,
     including better support for Pioneer and Roland/BOSS devices

  HD-audio:
   - Default back to non-buffer preallocation on x86
   - Cirrus codec improvements, more quirks for Realtek codecs

  Others:
   - New virtio sound driver
   - FireWire Bebob updates"

* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
  ALSA: hda/conexant: Re-order CX5066 quirk table entries
  ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
  ALSA: hda/realtek: Re-order ALC662 quirk table entries
  ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
  ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
  ALSA: usb-audio: Remove redundant assignment to len
  ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
  ALSA: virtio: fix kernel-doc
  ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  ALSA: sb: Fix two use after free in snd_sb_qsound_build
  ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
  ...

Pull more drm updates from Dave Airlie:
 "Looks like I missed a tegra feature request for next, but should still
  be fine since it's pretty self contained.

  Apart from that got a set of i915 and amdgpu fixes as per usual along
  with a few misc fixes.

  tegra:
   - Tegra186 hardware cursor support
   - better capability reporting for different SoC
   - better framebuffer modifier support
   - host1x fixes

  ttm:
   - fix unswappable BO handling

  efifb:
   - check for PCI before using it

  amdgpu:
   - Fixes for Aldebaran
   - Display LTTPR fixes
   - eDP fixes
   - Fixes for Vangogh
   - RAS fixes
   - ASPM support
   - Renoir SMU fixes
   - Modifier fixes
   - Misc code cleanups
   - Freesync fixes

  i915:
   - Several fixes to GLK handling in recent display refactoring
   - Rare watchdog timer race fix
   - Cppcheck redundant condition fix
   - Overlay error code propagation fix
   - Documentation fix
   - gvt: Remove one unused function warning
   - gvt: Fix intel_gvt_init_device() return type
   - gvt: Remove one duplicated register accessible check"

* tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits)
  efifb: Check efifb_pci_dev before using it
  drm/i915: Fix docbook descriptions for i915_gem_shrinker
  drm/i915: fix an error code in intel_overlay_do_put_image()
  drm/i915/display/psr: Fix cppcheck warnings
  drm/i915: Disable LTTPR detection on GLK once again
  drm/i915: Restore lost glk ccs w/a
  drm/i915: Restore lost glk FBC 16bpp w/a
  drm/i915: Take request reference before arming the watchdog timer
  drm/ttm: fix error handling if no BO can be swapped out v4
  drm/i915/gvt: Remove duplicated register accessible check
  drm/amdgpu/gmc9: remove dummy read workaround for newer chips
  drm/amdgpu: Add mem sync flag for IB allocated by SA
  drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
  drm/amdgpu: Reset RAS error count and status regs
  Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"
  drm/amd/display: 3.2.132
  drm/amd/display: [FW Promotion] Release 0.0.62
  drm/amd/display: add helper for enabling mst stream features
  drm/amd/display: Report Proper Quantization Range in AVI Infoframe
  drm/amd/display: Fix call to pass bpp in 16ths of a bit
  ...

Pull module updates from Jessica Yu:
 "Fix an age old bug involving jump_calls and static_labels when
  CONFIG_MODULE_UNLOAD=n.

  When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
  normally the __exit sections of a module are not loaded at all.
  However, dynamic code patching (jump_label, static_call, alternatives)
  can have sites in __exit sections even if __exit is never executed.

  Reported by Peter Zijlstra:
     'Alternatives, jump_labels and static_call all can have relocations
      into __exit code. Not loading it at all would be BAD.'

  Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
  and discard them after init"

* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...

Pull Xtensa updates from Max Filippov:

 - switch to generic syscall generation scripts

 - new GDBIO implementation for xtensa semihosting interface

 - various small code fixes and cleanups

 - a few typo fixes in comments and Kconfig help text

* tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: add GDBIO implementation to semihosting interface
  xtensa: ISS: split simcall implementation from semihosting interface
  xtensa: simcall.h: Change compitible to compatible
  xtensa: Couple of typo fixes
  xtensa: drop extraneous register load from initialize_mmu
  xtensa: fix pgprot_noncached assumptions
  xtensa: simplify coherent_kvaddr logic
  xtensa: syscalls: switch to generic syscallhdr.sh
  xtensa: syscalls: switch to generic syscalltbl.sh
  xtensa: stop filling syscall array with sys_ni_syscall
  xtensa: remove unneeded export in boot-elf/Makefile
  xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig
  xtensa: fix warning comparing pointer to 0
  xtensa: fix spelling mistake in Kconfig "wont" -> "won't"

Merge tag 'drm-intel-next-fixes-2021-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v5.13-rc1:
- Several fixes to GLK handling in recent display refactoring (Ville)
- Rare watchdog timer race fix (Tvrtko)
- Cppcheck redundant condition fix (José)
- Overlay error code propagation fix (Dan Carpenter)
- Documentation fix (Maarten)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871raw5d3g.fsf@intel.com

Merge tag 'amd-drm-next-5.13-2021-04-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.13-2021-04-23:

amdgpu:
- Fixes for Aldebaran
- Display LTTPR fixes
- eDP fixes
- Fixes for Vangogh
- RAS fixes
- ASPM support
- Renoir SMU fixes
- Modifier fixes
- Misc code cleanups
- Freesync fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423223920.3786-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2021-04-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Two patches in drm-misc-next-fixes this week, one to fix the error
handling in TTM when a BO can't be swapped out and one to prevent a
wrong dereference in efifb.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429090308.k3fuqvenf6vupfmg@gilmour

drm/tegra: Changes for v5.13-rc1

The changes this time around contain a couple of fixes for host1x along
with some improvements for Tegra DRM. Most notably the Tegra DRM driver
now supports the hardware cursor on Tegra186 and later, more correctly
reflects the capabilities of the display pipelines on various Tegra SoC
generations and knows how to deal with the dGPU sector layout by using
framebuffer modifiers.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401164430.3349105-1-thierry.reding@gmail.com

Pull Kconfig updates from Masahiro Yamada:

 - Change 'option defconfig' to the environment variable
   KCONFIG_DEFCONFIG_LIST

 - Refactor tinyconfig without using allnoconfig_y

 - Remove 'option allnoconfig_y' syntax

 - Change 'option modules' to 'modules'

 - Do not use /boot/config-* etc. as base config for cross-compilation

 - Fix a search bug in nconf

 - Various code cleanups

* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kconfig: refactor .gitignore
  kconfig: highlight xconfig 'comment' lines with '***'
  kconfig: highlight gconfig 'comment' lines with '***'
  kconfig: gconf: remove unused code
  kconfig: remove unused PACKAGE definition
  kconfig: nconf: stop endless search loops
  kconfig: split menu.c out of parser.y
  kconfig: nconf: refactor in print_in_middle()
  kconfig: nconf: remove meaningless wattrset() call from show_menu()
  kconfig: nconf: change set_config_filename() to void function
  kconfig: nconf: refactor attributes setup code
  kconfig: nconf: remove unneeded default for menu prompt
  kconfig: nconf: get rid of (void) casts from wattrset() calls
  kconfig: nconf: fix NORMAL attributes
  kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
  kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
  kconfig: change sym_change_count to a boolean flag
  kconfig: nconf: fix core dump when searching in empty menu
  kconfig: lxdialog: A spello fix and a punctuation added
  kconfig: streamline_config.pl: Couple of typo fixes
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Evaluate $(call cc-option,...) etc. only for build targets

 - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux

 - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
   flag finds the toolchains

 - Do not pass Clang's --prefix flag when using the integrated as

 - Check the assembler version in Kconfig time

 - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
   some dependencies in Kconfig

 - Fix invalid Module.symvers creation when building only modules
   without vmlinux

 - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
   set, but there is no module to build

 - Refactor module installation Makefile

 - Support zstd for module compression

 - Convert alpha and ia64 to use generic shell scripts to generate the
   syscall headers

 - Add a new elfnote to indicate if the kernel was built with LTO, which
   will be used by pahole

 - Flatten the directory structure under include/config/ so CONFIG
   options and filenames match

 - Change the deb source package name from linux-$(KERNELRELEASE) to
   linux-upstream

* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
  kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
  kbuild: deb-pkg: change the source package name to linux-upstream
  tools: do not include scripts/Kbuild.include
  kbuild: redo fake deps at include/config/*.h
  kbuild: remove TMPO from try-run
  MAINTAINERS: add pattern for dummy-tools
  kbuild: add an elfnote for whether vmlinux is built with lto
  ia64: syscalls: switch to generic syscallhdr.sh
  ia64: syscalls: switch to generic syscalltbl.sh
  alpha: syscalls: switch to generic syscallhdr.sh
  alpha: syscalls: switch to generic syscalltbl.sh
  sysctl: use min() helper for namecmp()
  kbuild: add support for zstd compressed modules
  kbuild: remove CONFIG_MODULE_COMPRESS
  kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
  kbuild: move module strip/compression code into scripts/Makefile.modinst
  kbuild: refactor scripts/Makefile.modinst
  kbuild: rename extmod-prefix to extmod_prefix
  kbuild: check module name conflict for external modules as well
  kbuild: show the target directory for depmod log
  ...

- plethora of fixes for valid gcc warnings from Lee Jones

- Wacom pen handling fix from Ping Cheng

- support for initialization of some newer Thrustmaster wheels from
  Dario Pagani

- Surface Aggregator Module support from Maximilian Luz

- Workaround for broken behavior of Plantronics Blackwire from Maxim
  Mikityanskiy

- Apple Magic Mouse 2 support from John Chen

- Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from
  Hans de Goede

- LED fixes and Thinkpad X1 Tablet keyboard support, from Hans de Goede

- Cleanups to ACPI handling in i2c-hid driver from Andy Shevchenko