Skip to content

L
linux
Switch branch/tag
  1. 20 Sep, 2017 21 commits
    • Xin Long's avatar
      ip6_gre: update mtu properly in ip6gre_err · ca7d8a33
      Xin Long authored 
      
[ Upstream commit 5c25f30c ]

Now when probessing ICMPV6_PKT_TOOBIG, ip6gre_err only subtracts the
offset of gre header from mtu info. The expected mtu of gre device
should also subtract gre header. Otherwise, the next packets still
can't be sent out.

Jianlin found this issue when using the topo:
  client(ip6gre)<---->(nic1)route(nic2)<----->(ip6gre)server

and reducing nic2's mtu, then both tcp and sctp's performance with
big size data became 0.

This patch is to fix it by also subtracting grehdr (tun->tun_hlen)
from mtu info when updating gre device's mtu in ip6gre_err(). It
also needs to subtract ETH_HLEN if gre dev'type is ARPHRD_ETHER.
Reported-by: default avatarJianlin Shi <jishi@redhat.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ca7d8a33
    • Jason Wang's avatar
      vhost_net: correctly check tx avail during rx busy polling · f5755c0e
      Jason Wang authored 
      
[ Upstream commit 8b949bef ]

We check tx avail through vhost_enable_notify() in the past which is
wrong since it only checks whether or not guest has filled more
available buffer since last avail idx synchronization which was just
done by vhost_vq_avail_empty() before. What we really want is checking
pending buffers in the avail ring. Fix this by calling
vhost_vq_avail_empty() instead.

This issue could be noticed by doing netperf TCP_RR benchmark as
client from guest (but not host). With this fix, TCP_RR from guest to
localhost restores from 1375.91 trans per sec to 55235.28 trans per
sec on my laptop (Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz).

Fixes: 03088137 ("vhost_net: basic polling support")
Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f5755c0e
    • Claudiu Manoil's avatar
      gianfar: Fix Tx flow control deactivation · 90406e68
      Claudiu Manoil authored 
      
[ Upstream commit 5d621672 ]

The wrong register is checked for the Tx flow control bit,
it should have been maccfg1 not maccfg2.
This went unnoticed for so long probably because the impact is
hardly visible, not to mention the tangled code from adjust_link().
First, link flow control (i.e. handling of Rx/Tx link level pause frames)
is disabled by default (needs to be enabled via 'ethtool -A').
Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few
old boards), which results in Tx flow control remaining always on
once activated.

Fixes: 45b679c9 ("gianfar: Implement PAUSE frame generation support")
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      90406e68
    • Jesper Dangaard Brouer's avatar
      Revert "net: fix percpu memory leaks" · 1bcf1871
      Jesper Dangaard Brouer authored 
      
[ Upstream commit 5a63643e ]

This reverts commit 1d6119ba.

After reverting commit 6d7b857d ("net: use lib/percpu_counter API
for fragmentation mem accounting") then here is no need for this
fix-up patch.  As percpu_counter is no longer used, it cannot
memory leak it any-longer.

Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119ba ("net: fix percpu memory leaks")
Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1bcf1871
    • Jesper Dangaard Brouer's avatar
      Revert "net: use lib/percpu_counter API for fragmentation mem accounting" · 5a7a40ba
      Jesper Dangaard Brouer authored 
      
[ Upstream commit fb452a1a ]

This reverts commit 6d7b857d.

There is a bug in fragmentation codes use of the percpu_counter API,
that can cause issues on systems with many CPUs.

The frag_mem_limit() just reads the global counter (fbc->count),
without considering other CPUs can have upto batch size (130K) that
haven't been subtracted yet.  Due to the 3MBytes lower thresh limit,
this become dangerous at >=24 CPUs (3*1024*1024/130000=24).

The correct API usage would be to use __percpu_counter_compare() which
does the right thing, and takes into account the number of (online)
CPUs and batch size, to account for this and call __percpu_counter_sum()
when needed.

We choose to revert the use of the lib/percpu_counter API for frag
memory accounting for several reasons:

1) On systems with CPUs > 24, the heavier fully locked
   __percpu_counter_sum() is always invoked, which will be more
   expensive than the atomic_t that is reverted to.

Given systems with more than 24 CPUs are becoming common this doesn't
seem like a good option.  To mitigate this, the batch size could be
decreased and thresh be increased.

2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX
   CPU, before SKBs are pushed into sockets on remote CPUs.  Given
   NICs can only hash on L2 part of the IP-header, the NIC-RXq's will
   likely be limited.  Thus, a fair chance that atomic add+dec happen
   on the same CPU.

Revert note that commit 1d6119ba ("net: fix percpu memory leaks")
removed init_frag_mem_limit() and instead use inet_frags_init_net().
After this revert, inet_frags_uninit_net() becomes empty.

Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119ba ("net: fix percpu memory leaks")
Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5a7a40ba
    • Ido Schimmel's avatar
      bridge: switchdev: Clear forward mark when transmitting packet · b5a3ae8b
      Ido Schimmel authored 
      
[ Upstream commit 79e99bdd ]

Commit 6bc506b4 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.

In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.

However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.

This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.

Fixes: 6bc506b4 ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reported-by: default avatarYotam Gigi <yotamg@mellanox.com>
Tested-by: default avatarYotam Gigi <yotamg@mellanox.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b5a3ae8b
    • Ido Schimmel's avatar
      mlxsw: spectrum: Forbid linking to devices that have uppers · 73ee5a73
      Ido Schimmel authored 
      
[ Upstream commit 25cc72a3 ]

The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.

Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.

One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.

Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.

Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reported-by: default avatarNogah Frankel <nogahf@mellanox.com>
Tested-by: default avatarNogah Frankel <nogahf@mellanox.com>
Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      73ee5a73
    • Wei Wang's avatar
      tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 · a10c5101
      Wei Wang authored 
      
[ Upstream commit 499350a5 ]

When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: default avatarAndrey Konovalov  <andreyknvl@google.com>
Signed-off-by: default avatarWei Wang <weiwan@google.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a10c5101
    • Florian Fainelli's avatar
      Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()" · a6e51fda
      Florian Fainelli authored 
      
[ Upstream commit ebc8254a ]

This reverts commit 7ad813f2 ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.

David Daney provide the following call trace and diagram of events:

When ndo_stop() is called we call:

 phy_disconnect()
    +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
    +---> phy_stop_machine()
    |      +---> phy_state_machine()
    |              +----> queue_delayed_work(): Work queued.
    +--->phy_detach() implies: phydev->attached_dev = NULL;

Now at a later time the queued work does:

 phy_state_machine()
    +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:

 CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24   : 0000000000000061 ffffffff808637b0
$28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi    : 000000000000002a
Lo    : 000000000000003f
epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3        KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId  : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
        0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
        80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
        ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
        8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
        ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
        0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
        8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
        8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
        8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
        ...
Call Trace:
[<ffffffff80de37ec>] netif_carrier_off+0xc/0x58
[<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
[<ffffffff808a1708>] process_one_work+0x158/0x368
[<ffffffff808a1ac0>] worker_thread+0x150/0x4c0
[<ffffffff808a8598>] kthread+0xc8/0xe0
[<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c

The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.

PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reported-by: default avatarDavid Daney <ddaney.cavm@gmail.com>
Fixes: 7ad813f2 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a6e51fda
    • Eric Dumazet's avatar
      kcm: do not attach PF_KCM sockets to avoid deadlock · af33da0e
      Eric Dumazet authored 
      
[ Upstream commit 351050ec ]

syzkaller had no problem to trigger a deadlock, attaching a KCM socket
to another one (or itself). (original syzkaller report was a very
confusing lockdep splat during a sendmsg())

It seems KCM claims to only support TCP, but no enforcement is done,
so we might need to add additional checks.

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Acked-by: default avatarTom Herbert <tom@quantonium.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      af33da0e
    • Benjamin Poirier's avatar
      packet: Don't write vnet header beyond end of buffer · 8c623e5d
      Benjamin Poirier authored 
      
[ Upstream commit edbd58be ]

... which may happen with certain values of tp_reserve and maclen.

Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv")
Signed-off-by: default avatarBenjamin Poirier <bpoirier@suse.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8c623e5d
    • Stefano Brivio's avatar
      cxgb4: Fix stack out-of-bounds read due to wrong size to t4_record_mbox() · 2b3bd597
      Stefano Brivio authored 
      
[ Upstream commit 0f308686 ]

Passing commands for logging to t4_record_mbox() with size
MBOX_LEN, when the actual command size is actually smaller,
causes out-of-bounds stack accesses in t4_record_mbox() while
copying command words here:

	for (i = 0; i < size / 8; i++)
		entry->cmd[i] = be64_to_cpu(cmd[i]);

Up to 48 bytes from the stack are then leaked to debugfs.

This happens whenever we send (and log) commands described by
structs fw_sched_cmd (32 bytes leaked), fw_vi_rxmode_cmd (48),
fw_hello_cmd (48), fw_bye_cmd (48), fw_initialize_cmd (48),
fw_reset_cmd (48), fw_pfvf_cmd (32), fw_eq_eth_cmd (16),
fw_eq_ctrl_cmd (32), fw_eq_ofld_cmd (32), fw_acl_mac_cmd(16),
fw_rss_glb_config_cmd(32), fw_rss_vi_config_cmd(32),
fw_devlog_cmd(32), fw_vi_enable_cmd(48), fw_port_cmd(32),
fw_sched_cmd(32), fw_devlog_cmd(32).

The cxgb4vf driver got this right instead.

When we call t4_record_mbox() to log a command reply, a MBOX_LEN
size can be used though, as get_mbox_rpl() will fill cmd_rpl up
completely.

Fixes: 7f080c3f ("cxgb4: Add support to enable logging of firmware mailbox commands")
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2b3bd597
    • stephen hemminger's avatar
      netvsc: fix deadlock betwen link status and removal · de2ecec2
      stephen hemminger authored 
      
[ Upstream commit 9b4e946c ]

There is a deadlock possible when canceling the link status
delayed work queue. The removal process is run with RTNL held,
and the link status callback is acquring RTNL.

Resolve the issue by using trylock and rescheduling.
If cancel is in process, that block it from happening.

Fixes: 122a5f64 ("staging: hv: use delayed_work for netvsc_send_garp()")
Signed-off-by: default avatarStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      de2ecec2
    • Arnd Bergmann's avatar
      qlge: avoid memcpy buffer overflow · 64dfc675
      Arnd Bergmann authored 
      
[ Upstream commit e58f9583 ]

gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:

    inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
  memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);

Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.

The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.

Fixes: a61f8026 ("qlge: Add ethtool register dump function.")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      64dfc675
    • Stefano Brivio's avatar
      sctp: Avoid out-of-bounds reads from address storage · 08d56d8a
      Stefano Brivio authored 
      
[ Upstream commit ee6c88bb ]

inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy
sizeof(sockaddr_storage) bytes to fill in sockaddr structs used
to export diagnostic information to userspace.

However, the memory allocated to store sockaddr information is
smaller than that and depends on the address family, so we leak
up to 100 uninitialized bytes to userspace. Just use the size of
the source structs instead, in all the three cases this is what
userspace expects. Zero out the remaining memory.

Unused bytes (i.e. when IPv4 addresses are used) in source
structs sctp_sockaddr_entry and sctp_transport are already
cleared by sctp_add_bind_addr() and sctp_transport_new(),
respectively.

Noticed while testing KASAN-enabled kernel with 'ss':

[ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800
[ 2326.896800] Read of size 128 by task ss/9527
[ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1
[ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
[ 2326.917585] Call Trace:
[ 2326.920312]  dump_stack+0x63/0x8d
[ 2326.924014]  kasan_object_err+0x21/0x70
[ 2326.928295]  kasan_report+0x288/0x540
[ 2326.932380]  ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.938500]  ? skb_put+0x8b/0xd0
[ 2326.942098]  ? memset+0x31/0x40
[ 2326.945599]  check_memory_region+0x13c/0x1a0
[ 2326.950362]  memcpy+0x23/0x50
[ 2326.953669]  inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.959596]  ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag]
[ 2326.966495]  ? __lock_sock+0x102/0x150
[ 2326.970671]  ? sock_def_wakeup+0x60/0x60
[ 2326.975048]  ? remove_wait_queue+0xc0/0xc0
[ 2326.979619]  sctp_diag_dump+0x44a/0x760 [sctp_diag]
[ 2326.985063]  ? sctp_ep_dump+0x280/0x280 [sctp_diag]
[ 2326.990504]  ? memset+0x31/0x40
[ 2326.994007]  ? mutex_lock+0x12/0x40
[ 2326.997900]  __inet_diag_dump+0x57/0xb0 [inet_diag]
[ 2327.003340]  ? __sys_sendmsg+0x150/0x150
[ 2327.007715]  inet_diag_dump+0x4d/0x80 [inet_diag]
[ 2327.012979]  netlink_dump+0x1e6/0x490
[ 2327.017064]  __netlink_dump_start+0x28e/0x2c0
[ 2327.021924]  inet_diag_handler_cmd+0x189/0x1a0 [inet_diag]
[ 2327.028045]  ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag]
[ 2327.034651]  ? inet_diag_dump_compat+0x190/0x190 [inet_diag]
[ 2327.040965]  ? __netlink_lookup+0x1b9/0x260
[ 2327.045631]  sock_diag_rcv_msg+0x18b/0x1e0
[ 2327.050199]  netlink_rcv_skb+0x14b/0x180
[ 2327.054574]  ? sock_diag_bind+0x60/0x60
[ 2327.058850]  sock_diag_rcv+0x28/0x40
[ 2327.062837]  netlink_unicast+0x2e7/0x3b0
[ 2327.067212]  ? netlink_attachskb+0x330/0x330
[ 2327.071975]  ? kasan_check_write+0x14/0x20
[ 2327.076544]  netlink_sendmsg+0x5be/0x730
[ 2327.080918]  ? netlink_unicast+0x3b0/0x3b0
[ 2327.085486]  ? kasan_check_write+0x14/0x20
[ 2327.090057]  ? selinux_socket_sendmsg+0x24/0x30
[ 2327.095109]  ? netlink_unicast+0x3b0/0x3b0
[ 2327.099678]  sock_sendmsg+0x74/0x80
[ 2327.103567]  ___sys_sendmsg+0x520/0x530
[ 2327.107844]  ? __get_locked_pte+0x178/0x200
[ 2327.112510]  ? copy_msghdr_from_user+0x270/0x270
[ 2327.117660]  ? vm_insert_page+0x360/0x360
[ 2327.122133]  ? vm_insert_pfn_prot+0xb4/0x150
[ 2327.126895]  ? vm_insert_pfn+0x32/0x40
[ 2327.131077]  ? vvar_fault+0x71/0xd0
[ 2327.134968]  ? special_mapping_fault+0x69/0x110
[ 2327.140022]  ? __do_fault+0x42/0x120
[ 2327.144008]  ? __handle_mm_fault+0x1062/0x17a0
[ 2327.148965]  ? __fget_light+0xa7/0xc0
[ 2327.153049]  __sys_sendmsg+0xcb/0x150
[ 2327.157133]  ? __sys_sendmsg+0xcb/0x150
[ 2327.161409]  ? SyS_shutdown+0x140/0x140
[ 2327.165688]  ? exit_to_usermode_loop+0xd0/0xd0
[ 2327.170646]  ? __do_page_fault+0x55d/0x620
[ 2327.175216]  ? __sys_sendmsg+0x150/0x150
[ 2327.179591]  SyS_sendmsg+0x12/0x20
[ 2327.183384]  do_syscall_64+0xe3/0x230
[ 2327.187471]  entry_SYSCALL64_slow_path+0x25/0x25
[ 2327.192622] RIP: 0033:0x7f41d18fa3b0
[ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0
[ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003
[ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040
[ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003
[ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084
[ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64
[ 2327.251953] Allocated:
[ 2327.254581] PID = 9484
[ 2327.257215]  save_stack_trace+0x1b/0x20
[ 2327.261485]  save_stack+0x46/0xd0
[ 2327.265179]  kasan_kmalloc+0xad/0xe0
[ 2327.269165]  kmem_cache_alloc_trace+0xe6/0x1d0
[ 2327.274138]  sctp_add_bind_addr+0x58/0x180 [sctp]
[ 2327.279400]  sctp_do_bind+0x208/0x310 [sctp]
[ 2327.284176]  sctp_bind+0x61/0xa0 [sctp]
[ 2327.288455]  inet_bind+0x5f/0x3a0
[ 2327.292151]  SYSC_bind+0x1a4/0x1e0
[ 2327.295944]  SyS_bind+0xe/0x10
[ 2327.299349]  do_syscall_64+0xe3/0x230
[ 2327.303433]  return_from_SYSCALL_64+0x0/0x6a
[ 2327.308194] Freed:
[ 2327.310434] PID = 4131
[ 2327.313065]  save_stack_trace+0x1b/0x20
[ 2327.317344]  save_stack+0x46/0xd0
[ 2327.321040]  kasan_slab_free+0x73/0xc0
[ 2327.325220]  kfree+0x96/0x1a0
[ 2327.328530]  dynamic_kobj_release+0x15/0x40
[ 2327.333195]  kobject_release+0x99/0x1e0
[ 2327.337472]  kobject_put+0x38/0x70
[ 2327.341266]  free_notes_attrs+0x66/0x80
[ 2327.345545]  mod_sysfs_teardown+0x1a5/0x270
[ 2327.350211]  free_module+0x20/0x2a0
[ 2327.354099]  SyS_delete_module+0x2cb/0x2f0
[ 2327.358667]  do_syscall_64+0xe3/0x230
[ 2327.362750]  return_from_SYSCALL_64+0x0/0x6a
[ 2327.367510] Memory state around the buggy address:
[ 2327.372855]  ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2327.380914]  ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00
[ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb
[ 2327.397031]                                ^
[ 2327.401792]  ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 2327.409850]  ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00
[ 2327.417907] ==================================================================

This fixes CVE-2017-7558.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266
Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      08d56d8a
    • Florian Fainelli's avatar
      fsl/man: Inherit parent device and of_node · 4d8ee193
      Florian Fainelli authored 
      
[ Upstream commit a1a50c8e ]

Junote Cai reported that he was not able to get a DSA setup involving the
Freescale DPAA/FMAN driver to work and narrowed it down to
of_find_net_device_by_node(). This function requires the network device's
device reference to be correctly set which is the case here, though we have
lost any device_node association there.

The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform
device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be
propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent
device and the of_node when dpaa_eth_add_device() creates the platform device.

Fixes: 39339616 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4d8ee193
    • Eric Dumazet's avatar
      udp: on peeking bad csum, drop packets even if not at head · 1e39e5c6
      Eric Dumazet authored 
      
[ Upstream commit fd6055a8 ]

When peeking, if a bad csum is discovered, the skb is unlinked from
the queue with __sk_queue_drop_skb and the peek operation restarted.

__sk_queue_drop_skb only drops packets that match the queue head.

This fails if the skb was found after the head, using SO_PEEK_OFF
socket option. This causes an infinite loop.

We MUST drop this problematic skb, and we can simply check if skb was
already removed by another thread, by looking at skb->next :

This pointer is set to NULL by the  __skb_unlink() operation, that might
have happened only under the spinlock protection.

Many thanks to syzkaller team (and particularly Dmitry Vyukov who
provided us nice C reproducers exhibiting the lockup) and Willem de
Bruijn who provided first version for this patch and a test program.

Fixes: 627d2d6b ("udp: enable MSG_PEEK at non-zero offset")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1e39e5c6
    • Sabrina Dubroca's avatar
      macsec: add genl family module alias · 4b4a194a
      Sabrina Dubroca authored 
      
[ Upstream commit 78362998 ]

This helps tools such as wpa_supplicant can start even if the macsec
module isn't loaded yet.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4b4a194a
    • Wei Wang's avatar
      ipv6: fix sparse warning on rt6i_node · 43c792a8
      Wei Wang authored 
      
[ Upstream commit 4e587ea7 ]

Commit c5cff856 adds rcu grace period before freeing fib6_node. This
generates a new sparse warning on rt->rt6i_node related code:
  net/ipv6/route.c:1394:30: error: incompatible types in comparison
  expression (different address spaces)
  ./include/net/ip6_fib.h:187:14: error: incompatible types in comparison
  expression (different address spaces)

This commit adds "__rcu" tag for rt6i_node and makes sure corresponding
rcu API is used for it.
After this fix, sparse no longer generates the above warning.

Fixes: c5cff856 ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: default avatarWei Wang <weiwan@google.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      43c792a8
    • Wei Wang's avatar
      ipv6: add rcu grace period before freeing fib6_node · 7f8f23fc
      Wei Wang authored 
      
[ Upstream commit c5cff856 ]

We currently keep rt->rt6i_node pointing to the fib6_node for the route.
And some functions make use of this pointer to dereference the fib6_node
from rt structure, e.g. rt6_check(). However, as there is neither
refcount nor rcu taken when dereferencing rt->rt6i_node, it could
potentially cause crashes as rt->rt6i_node could be set to NULL by other
CPUs when doing a route deletion.
This patch introduces an rcu grace period before freeing fib6_node and
makes sure the functions that dereference it takes rcu_read_lock().

Note: there is no "Fixes" tag because this bug was there in a very
early stage.
Signed-off-by: default avatarWei Wang <weiwan@google.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7f8f23fc
    • Stefano Brivio's avatar
      ipv6: accept 64k - 1 packet length in ip6_find_1stfragopt() · dccb31be
      Stefano Brivio authored 
      
[ Upstream commit 3de33e1b ]

A packet length of exactly IPV6_MAXPLEN is allowed, we should
refuse parsing options only if the size is 64KiB or more.

While at it, remove one extra variable and one assignment which
were also introduced by the commit that introduced the size
check. Checking the sum 'offset + len' and only later adding
'len' to 'offset' doesn't provide any advantage over directly
summing to 'offset' and checking it.

Fixes: 6399f1fa ("ipv6: avoid overflow of offset in ip6_find_1stfragopt")
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dccb31be
  3. 13 Sep, 2017 16 commits
  5. 10 Sep, 2017 1 commit
  7. 09 Sep, 2017 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7