This patch does the initialization of all queues ie the
receive buffer pools, receive and transmit queues, completion
or notification queues etc. Allocates all required resources
(eg transmit schedulers, receive buffers etc) and configures
them for proper functioning of queues. Also sets up receive
queue's RED dropping levels.
Co-developed-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For a PF to function as a NIC, NPA (for Rx buffers, Tx descriptors etc)
and NIX (for rcv, send and completion queues) are the minimum resources
needed. So request admin function (AF) to attach one each of NIX and NPA
block LFs (local functions).

Only AF can configure a LF's contexts, so request AF to allocate memory
for NPA aura/pool and NIX RQ/SQ/CQ HW contexts. Upon receiving response,
save some of the HW constants like number of pointers per stack page,
size of send queue buffer (SQBs, where SQEs are queued by HW) e.t.c which
are later used to initialize queues.

A HW context here is like a state machine maintained for a descriptor
queue. eg size, head/tail pointers, irq etc etc. HW maintains this in
memory.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the resource virtualization unit (RVU) each of the PF and AF
(admin function) share a 64KB of reserved memory region for
communication. This patch initializes PF <=> AF mailbox IRQs,
registers handlers for processing these communication messages.
Also adds support to process these messages in both directions
ie responses to PF initiated DOWN (PF => AF) messages and AF
initiated UP messages (AF => PF).

Mbox communication APIs and message formats are defined in AF driver
(drivers/net/ethernet/marvell/octeontx2/af), mbox.h from AF driver is
included here to avoid duplication.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds template for the Marvell's OcteonTX2 network
controller's physical function driver. Just the probe, PCI
specific initialization and netdev registration.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-01-27

The following pull-request contains BPF updates for your *net-next* tree.

We've added 20 non-merge commits during the last 5 day(s) which contain
a total of 24 files changed, 433 insertions(+), 104 deletions(-).

The main changes are:

1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa.

2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko.

3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer.

4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend.

5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi.

6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin.

7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov.

8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover.

9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 7786a1af.

It causes build failures on 32-bit, for example:

   net/core/pktgen.o: In function `mod_cur_headers':
>> pktgen.c:(.text.mod_cur_headers+0xba0): undefined reference to `__umoddi3'
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to stop useless driver version bumps and unify output
presented by ethtool -i, let's set default version string.

As Linus said in [1]: "Things are supposed to be backwards and
forwards compatible, because we don't accept breakage in user
space anyway. So versioning is pointless, and only causes
problems."

They cause problems when users start to see version changes
and expect specific set of features which will be different
for stable@, vanilla and distribution kernels.

Distribution kernels are based on some kernel version with extra
patches on top, for example, in RedHat world this "extra" is a lot
and for them your driver version say nothing. Users who run vanilla
kernels won't use driver version information too, because running
such kernels requires knowledge and understanding.

Another set of problems are related to difference in versioning scheme
and such doesn't allow to write meaningful automation which will work
sanely on all ethtool capable devices.

Before this change:
[leonro@erver ~]$ ethtool -i eth0
driver: virtio_net
version: 1.0.0
After this change and once ->version assignment will be deleted
from virtio_net:
[leonro@server ~]$ ethtool -i eth0
driver: virtio_net
version: 5.5.0-rc6+

Link: https://lore.kernel.org/ksummit-discuss/CA+55aFx9A=5cc0QZ7CySC4F2K7eYaEfzkdYEc9JaNgCcV25=rg@mail.gmail.com/
Link: https://lore.kernel.org/linux-rdma/20200122152627.14903-1-michal.kalderon@marvell.com/T/#md460ff8f976c532a89d6860411c3c50bb811038b
Link: https://lore.kernel.org/linux-rdma/20200127060835.GA570@unicorn.suse.czSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Maftei says:

====================
sfc: refactor mcdi filtering code

Splitting final bits of the driver code into different files, which
will later be used in another driver for a new product.

This is a continuation to my previous patch series. (three of them)
Refactoring will be concluded with this series, for now.

As instructed, split the renaming and moving into different patches.
Removed stray spaces before tabs... twice.
Minor refactoring was done with the renaming, as explained in the
first patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moved structs, enums, and added function prototypes.

The affected functions are no longer static.
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor style fixes included due to name lengths changing.
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Updates for net-next.

This patch-set includes link up and link initialization improvements,
RSS and aRFS improvements, devlink refactoring and registration
improvements, devlink info support including documentation.

v2: Removed the TC ingress rate limiting patch. The developer Harsha needs
to rework some code.
    Use fw.psid suggested by Jakub Kicinski.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the set of info versions reported by bnxt_en driver, including
a description of what the version represents, and what modes (fixed,
running, stored) it reports.

v2: Use fw.psid.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Display the following information via devlink info command:
  - Driver name
  - Board id
  - Broad revision
  - Board Serial number
  - Board FW version
  - FW parameter set version
  - FW App version
  - FW management version
  - FW RoCE version

  Standard output example:
  $ devlink dev info pci/0000:3b:00.0
  pci/0000:3b:00.0:
  driver bnxt_en
  serial_number 00-10-18-FF-FE-AD-05-00
  versions:
      fixed:
        asic.id D802
        asic.rev 1
      running:
        fw 216.1.124.0
        fw.psid 0.0.0
        fw.app 216.1.122.0
        fw.mgmt 864.0.32.0
        fw.roce 216.1.15.0

[ This version has incorporated changes suggested by Jakub Kicinski to
  use generic devlink version tags. ]

v2: Use fw.psid

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add definition and documentation for the new generic info "fw.roce".

v2: Remove board.nvm_cfg since fw.psid is similar.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of switch_id, renaming it to dsn will be more meaningful
so that it can be used to display device serial number in follow up
patch via devlink_info command.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds status notification to devlink flash update
while flashing is in progress.

$ devlink dev flash pci/0000:05:00.0 file 103.pkg
Preparing to flash
Flashing done

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Latest kernels get the phys_port_name via devlink, if
ndo_get_phys_port_name is not defined. To provide the phys_port_name
correctly, register devlink before registering netdev.

Also call devlink_port_type_eth_set() after registering netdev as
devlink port updates the netdev structure and notifies user.

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will allow to register for devlink port and use port features.
Also register params only if firmware spec version is at least 0x10600
which will support reading/setting numbered variables in NVRAM.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define bnxt_dl_params_register() and bnxt_dl_params_unregister()
functions and move params register/unregister code to these newly
defined functions. This patch is in preparation to register
devlink irrespective of firmware spec. version in the next patch.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware bug has been fixed on B0 and newer chips, so disable the
workaround on these chips.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the only time we check and remove expired filters is
when we are inserting new filters.
Improving the aRFS expiry handling by adding code to do the above
work periodically.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In bnxt_rx_flow_steer(), if the dissected packet is a fragment, do not
proceed to create the ntuple filter and return error instead.  Otherwise
we would create a filter with 0 source and destination ports because
the dissected ports would not be available for fragments.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

575XX (P5) chips have the same UDP RSS hashing capability as P4 chips,
so we can enable it on P5 chips.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dev_port is meant to distinguish the network ports belonging to
the same PCI function.  Our devices only have one network port
associated with each PCI function and so we should not set it for
correctness.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the 2nd parameter fw_dflt is not set, we are calling bnxt_probe_phy()
after the firmware has reset.  There is no need to query the current
PHY settings from firmware as these settings may be different from
the ethtool settings that the driver will re-establish later.  So
return earlier in bnxt_probe_phy() to save one firmware call.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In bnxt_update_phy_setting(), ethtool_get_link_ksettings() and
bnxt_disable_an_for_lpbk(), we inconsistently use netif_carrier_ok()
to determine link.  Instead, we should use bp->link_info.link_up
which has the true link state.  The netif_carrier state may be off
during self-test and while the device is being reset and may not always
reflect the true link state.

By always using bp->link_info.link_up, the code is now more
consistent and more correct.  Some unnecessary link toggles are
now prevented with this patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
ethtool netlink interface, part 2

This shorter series adds support for getting and setting of wake-on-lan
settings and message mask (originally message level). Together with the
code already in net-next, this will allow full implementation of
"ethtool <dev>" and "ethtool -s <dev> ...".

Older versions of the ethtool netlink series allowed getting WoL settings
by unprivileged users and only filtered out the password but this was
a source of controversy so for now, ETHTOOL_MSG_WOL_GET request always
requires CAP_NET_ADMIN as ETHTOOL_GWOL ioctl request does.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of
a device are modified using ETHTOOL_MSG_WOL_SET netlink message or
ETHTOOL_SWOL ioctl request.

As notifications can be received by anyone, do not include SecureOn(tm)
password in notification messages.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.

As part of the implementation, provide symbolic names for wake-on-line
modes as ETH_SS_WOL_MODES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message
mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message
or ETHTOOL_SMSGLVL ioctl request.

The notification message has the same format as reply to DEBUG_GET request.
As with other ethtool notifications, netlink requests only trigger the
notification if the mask is actually changed while ioctl request trigger it
whenever the request results in calling the ethtool_ops handler.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)

As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix missing or incorrect function argument and struct member descriptions.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-2020-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.6

Second set of patches for v5.6. Nothing special standing out, smaller
new features and fixes allover.

Major changes:

ar5523

* add support for SMCWUSBT-G2 USB device

iwlwifi

* support new versions of the FTM FW APIs

* support new version of the beacon template FW API

* print some extra information when the driver is loaded

rtw88

* support wowlan feature for 8822c

* add support for WIPHY_WOWLAN_NET_DETECT

brcmfmac

* add initial support for monitor mode

qtnfmac

* add module parameter to enable DFS offloading in firmware

* add support for STA HE rates

* add support for TWT responder and spatial reuse
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Yoshiki Komachi says:

====================
When I tried a test based on the selftest program for BPF flow dissector
(test_flow_dissector.sh), I observed unexpected result as below:

$ tc filter add dev lo parent ffff: protocol ip pref 1337 flower ip_proto \
	udp src_port 8-10 action drop
$ tools/testing/selftests/bpf/test_flow_dissector -i 4 -f 9 -F
inner.dest4: 127.0.0.1
inner.source4: 127.0.0.3
pkts: tx=10 rx=10

The last rx means the number of received packets. I expected rx=0 in this
test (i.e., all received packets should have been dropped), but it resulted
in acceptance.

Although the previous commit 8ffb055b ("cls_flower: Fix the behavior
using port ranges with hw-offload") added new flag and field toward filtering
based on port ranges with hw-offload, it missed applying for BPF flow dissector
then. As a result, BPF flow dissector currently stores data extracted from
packets in incorrect field used for exact match whenever packets are classified
by filters based on port ranges. Thus, they never match rules in such cases
because flow dissector gives rise to generating incorrect flow keys.

This series fixes the issue by replacing incorrect flag and field with new
ones in BPF flow dissector, and adds a test for filtering based on specified
port ranges to the existing selftest program.

Changes in v2:
 - set key_ports to NULL at the top of __skb_flow_bpf_to_target()
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a simple test to make sure that a filter based on specified port
range classifies packets correctly.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117070533.402240-3-komachi.yoshiki@gmail.com

This patch applies new flag (FLOW_DISSECTOR_KEY_PORTS_RANGE) and
field (tp_range) to BPF flow dissector to generate appropriate flow
keys when classified by specified port ranges.

Fixes: 8ffb055b ("cls_flower: Fix the behavior using port ranges with hw-offload")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117070533.402240-2-komachi.yoshiki@gmail.com

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2020-01-26

Here's (probably) the last bluetooth-next pull request for the 5.6 kernel.

 - Initial pieces of Bluetooth 5.2 Isochronous Channels support
 - mgmt: Various cleanups and a new Set Blocked Keys command
 - btusb: Added support for 04ca:3021 QCA_ROME device
 - hci_qca: Multiple fixes & cleanups
 - hci_bcm: Fixes & improved device tree support
 - Fixed attempts to create duplicate debugfs entries

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>