Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The feature is not ready in firmware yet, and it leads to hangs
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The firmware/hardware supports only 16 entries. Trying to use more can lead
to timeouts on some firmware versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Slightly improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In the MT7915 info, the fields for the WLAN index / queue overlap with the
token id, and the MT_TX_FREE_PAIR bit indicates, which one is present.

If MT_TX_FREE_PAIR is set, skip processing the token index, since the data
will not be valid.

This fixes accidentally freeing tokens which are still in use by the
hardware with a wrong station pointer.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

When looking for a MAC address slot, start by using main BSSID slots 1-3,
afterwards use 16 repeater mode BSSID slots, then start using the slots
usually used for AP mode.
This search order should prevent unnecessary conflicts with AP mode interfaces
on the same PHY
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The newer chipsets can deal with the same STA on multiple interfaces
Preparation for supporting more station interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is primarily for testing and can be used in combination with monitor
mode to make the card respond to packets sent to a specific MAC address.
For now this is only exposed as a debug/testing feature, later on the
approach might be used to support more concurrent station interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves icache footprint
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Enable MWDS mode in firmware as well and fix txp->rept_wds_wcid for wcid >= 255
Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is currently limited to 3-address mode AP and STA interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to improve driver throughput, convert status_work and net_work
to mt76 worker APIs.
Remove txrx_wq sdio workqueue since it is no longer used
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to reduce sdio bus contention, disable interrupts during
txrx_worker processing
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to improve driver throughput, convert txrx_work to mt76 worker
threads APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt7663 tx and rx processing in the same workqueue in order to
reduce jitter that can hit tcp performances. This is a preliminary patch
to switch to mt76 workers APIs
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt7615_load_patch in mt7615/mcu.c sometimes fails with:
mt7622-wmac 18000000.wmac: Failed to get patch semaphore
and returns -EAGAIN. But this error is returned all the way up to
mt7615_init_work with no actual retrial performed, leaving a
broken wireless phy.
Wait a bit and retry for up to 10 times before giving up.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The MCU field should contain a boolean 0/1, not the flag itself.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Read per-stream measurements every 100 ms and build a simple moving average.
Tested-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

ath.git patches for v5.11. Major changes:

ath11k

* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
  probe response support

* qcom,ath11k-calibration-variant Device Tree setting

* cold boot calibration support

* new DFS region: JP

wnc36xx

* enable connection monitoring and keepalive in firmware

ath10k

* firmware IRAM recovery feature

mhi

* merge mhi-ath11k-immutable branch to make MHI API change go smoothly

The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201127180835.2769297-1-trix@redhat.com

The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201127175821.2756988-1-trix@redhat.com

Added multiple queues[BK,BE,VI,VO] to handle different priority data
packets. Before adding a packet to the queue, checked its priority from
the header, and then add to the suitable queue. The limit for each queue
is maintained separately. Also while passing the packets to the firmware
via VMM take care to select data packets based on priority and available
space.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-6-ajay.kathat@microchip.com

Added complete() call for failure case in wilc_wlan_txq_add_cfg_pkt().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-5-ajay.kathat@microchip.com

Before returing from wilc_wlan_txq_add_mgmt_pkt() invoke tx_complete_fn()
callback to free up allocated memory for failure case.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-4-ajay.kathat@microchip.com

Before returing from wilc_wlan_txq_add_net_pkt() invoke tx_complete_fn()
callback to free up allocated memory for failure cases.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-3-ajay.kathat@microchip.com

Added support for 'ndo_set_mac_address call' callback to allow change of
interface MAC address.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-2-ajay.kathat@microchip.com

Apart from a firmware binary the chip needs a config file used by the
FW. Add the config files to modinfo so that they can be read by
userspace.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201124120018.31358-1-matthias.bgg@kernel.org

Switch to using the new API kobj_to_dev().
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1606096062-32251-1-git-send-email-tiantao6@hisilicon.com

Add toggle table related function to enhance WL throughput when WL coexist
with 4/18 HID.
The toggle table feature will toggle WL/BT priority table during WL slot,
it can decrease the impact from HID's frequently packets and prevent HID
lag.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-11-pkshih@realtek.com

Add modifications for A2DP interoperability issue of TWS earphones.
Some TWS earphones has low buffer size, so it's necessary to reduce
the slot period to let it get data more frequently.
(e.g. use 4-slot to replace the original 2-slot method).
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-10-pkshih@realtek.com

The original setting misses some necessary configuration.
Make coexistence slot align to beacon and check the connection situation
to know if we need to extend WLAN slot or not.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-9-pkshih@realtek.com

Some AP will not follow the power save request, or it cannot stop
transmission until its queue is empty. It may bring the decreasing of
data rate.

WLAN firmware will count is the AP still leaked packet after power save
handshake was done or not to enable WLAN slot extend mechanism.

The extend WLAN slot mechanism will extend the WLAN slot after power save
handshake, 5 ms per times, maximum is 5 times to received the leaked packet
to avoid the rate lower down.

And if the transmission was already locked at CCK rate.
The extended WLAN slot can also increase the opportunity that we can
received the CCK's long packet and be released from CCK rate.

While BT multi-link status was finished, there is possible that it still
has some packet remained for seconds. Add a timer to remain the multi-link
mechanism to protect WLAN Rx.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-8-pkshih@realtek.com

Add a flag to make decision whether the mechanism
should go into free-run mode or not.
For now, it is always false, the flag assignment will
be implemented later.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-7-pkshih@realtek.com

Add TDMA slot type setting for later usage.
Since the transmission of HID profile is very frequently,
it may bring a big impact to WLAN performance.
To change slot type, it can make mechanism be more flexible.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-6-pkshih@realtek.com

In free run mode, this WLAN info updating is only related to AFH
information, not related to the connection state, which is the current
implementation.
Always update WLAN info in free run mode now.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-5-pkshih@realtek.com

Update A2DP+PAN+WL mechanism for CPT(Coexistence Performance Test) to
enhance WL/BT performance at the environment that some specific AP are
existing.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-4-pkshih@realtek.com

Add message for debugging usage and the program flow is no change.
Add a variable reserved for WLAN firmware synchronize.
Add a group of variable to save BT packet counter, it will be
assigned as mechanism judgment in the future. Now it is just for
debug usage.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-3-pkshih@realtek.com

When WLAN entering or leaving, it's necessary to run coexistence mechanism
to ensure the setting matched current status.
Without calling rtw_coex_run_coex(), WLAN poor throughput or bad A2DP
quality may happen.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126021059.11981-2-pkshih@realtek.com

This reverts commit 28606150.
Since actually Buffalo WI-U3-866D is falied to power on with the change.

The rtl8812au driver code to power on is same with the rtl8821a code.
But the rtl8821ae included rtl8821a does not support USB interface.
So seems that rtl8812au should be supported by rt1l8821a code with USB.
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com

After enabling CONFIG_DMA_API_DEBUG there was a warning about using
dma_unmap_single() in wrong direction from ath11k_dp_rx_process_mon_status().

[  140.279477] ------------[ cut here ]------------
[  140.279908] DMA-API: ath11k_pci 0000:06:00.0: device driver syncs DMA memory with different direction [device address=0x00000000fac08a40] [size=2176 bytes] [mapped with DMA_FROM_DEVICE] [s
[  140.279925] WARNING: CPU: 7 PID: 97 at kernel/dma/debug.c:1120 check_sync+0x494/0x730
[  140.279939] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core
[  140.279958] CPU: 7 PID: 97 Comm: kworker/u16:1 Not tainted 5.10.0-rc4+ #262
[  140.279968] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[  140.279995] Workqueue: phy0 ieee80211_scan_work [mac80211]
[  140.280009] RIP: 0010:check_sync+0x494/0x730
[  140.280022] Code: 8b 4c 24 10 4c 8b 44 24 18 4c 8b 54 24 20 48 89 c6 4c 89 54 24 10 4c 89 f9 4c 89 ea 48 c7 c7 40 b9 74 9c 41 56 e8 2f a0 ab 00 <0f> 0b 48 89 ef e8 e5 17 ac 00 41 58 4c 8b
[  140.280033] RSP: 0018:ffff9f588024cbd8 EFLAGS: 00010086
[  140.280046] RAX: 0000000000000000 RBX: ffff9f588024cc40 RCX: ffff8eed18dd9f98
[  140.280057] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8eed18dd9f90
[  140.280067] RBP: ffff8eebc1407800 R08: 00000000ffffffea R09: 0000000000000000
[  140.280082] R10: 0000000000000003 R11: 3fffffffffffffff R12: ffffffff9e081060
[  140.280093] R13: ffff8eebc43908b0 R14: ffffffff9c74c104 R15: 00000000fac08a40
[  140.280104] FS:  0000000000000000(0000) GS:ffff8eed18c00000(0000) knlGS:0000000000000000
[  140.280115] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  140.280127] CR2: 00007f6feafb12a0 CR3: 00000001604ca001 CR4: 00000000003706e0
[  140.280138] Call Trace:
[  140.280149]  <IRQ>
[  140.280161]  debug_dma_sync_single_for_cpu+0x79/0x80
[  140.280173]  ? mark_held_locks+0x50/0x80
[  140.280185]  ? lockdep_hardirqs_on_prepare.part.0+0x65/0x130
[  140.280197]  ? __local_bh_enable_ip+0x6f/0xb0
[  140.280215]  ? ath11k_dp_rx_reap_mon_status_ring+0x202/0x340 [ath11k]
[  140.280231]  ath11k_dp_rx_reap_mon_status_ring+0x22c/0x340 [ath11k]
[  140.280249]  ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k]
[  140.280265]  ath11k_dp_rx_process_mon_status+0x83/0x3c0 [ath11k]
[  140.280278]  ? __lock_acquire+0x3bd/0x6d0
[  140.280296]  ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k]
[  140.280311]  ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k]
[  140.280326]  ? ath11k_hw_mac_id_to_srng_id_qca6390+0x10/0x10 [ath11k]
[  140.280341]  ? ath11k_dp_rx_process_mon_rings+0x4a/0x1a0 [ath11k]
[  140.280353]  ? timer_fixup_init+0x30/0x30
[  140.280367]  ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k]
[  140.280385]  ath11k_dp_service_mon_ring+0x2b/0x50 [ath11k]
[  140.280400]  ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k]
[  140.280413]  call_timer_fn+0xb1/0x2d0
[  140.280426]  __run_timers.part.0+0x205/0x2f0
[  140.280439]  run_timer_softirq+0x21/0x50
[  140.280450]  __do_softirq+0xc2/0x454
[  140.280463]  asm_call_irq_on_stack+0x12/0x20
[  140.280476]  </IRQ>
[  140.280488]  do_softirq_own_stack+0x56/0x60
[  140.280500]  irq_exit_rcu+0x9a/0xd0
[  140.280511]  sysvec_apic_timer_interrupt+0x43/0xa0
[  140.280526]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[  140.280540] RIP: 0010:_raw_spin_unlock_irqrestore+0x25/0x40
[  140.280551] Code: 80 00 00 00 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 ca 8f 4b ff 48 89 ef e8 22 dc 4b ff f6 c7 02 75 0c 53 9d <65> ff 0d 04 51 20 64 5b 5d c3 e8 9c 08 56
[  140.280563] RSP: 0018:ffff9f58802e7878 EFLAGS: 00000246
[  140.280578] RAX: 00000000000435ef RBX: 0000000000000246 RCX: 0000000000000040
[  140.280592] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9be13e84
[  140.280603] RBP: ffff8eed18dde480 R08: 0000000000000001 R09: ffff8eebc2292760
[  140.280614] R10: 0000000000000005 R11: ffff8eebc2292760 R12: 0000000000000000
[  140.280625] R13: ffff9f58802e7900 R14: ffff8eed18dde480 R15: ffff8eed18dde480
[  140.280637]  ? _raw_spin_unlock_irqrestore+0x34/0x40
[  140.280649]  __mod_timer+0x274/0x400
[  140.280661]  ? wait_for_completion_timeout+0x76/0x110
[  140.280675]  schedule_timeout+0xa8/0x140
[  140.280687]  ? __next_timer_interrupt+0x100/0x100
[  140.280698]  wait_for_completion_timeout+0xa2/0x110
[  140.280714]  ath11k_start_scan+0x4c/0xf0 [ath11k]
[  140.280730]  ath11k_mac_op_hw_scan+0x1e9/0x2c0 [ath11k]
[  140.280763]  drv_hw_scan+0x79/0x260 [mac80211]
[  140.280789]  __ieee80211_scan_completed+0x379/0x440 [mac80211]
[  140.280816]  ieee80211_scan_work+0x12f/0x330 [mac80211]
[  140.280830]  process_one_work+0x279/0x5b0
[  140.280842]  worker_thread+0x49/0x300
[  140.280854]  ? process_one_work+0x5b0/0x5b0
[  140.280868]  kthread+0x135/0x150
[  140.280880]  ? __kthread_bind_mask+0x60/0x60
[  140.280891]  ret_from_fork+0x22/0x30
[  140.280903] irq event stamp: 275961
[  140.280918] hardirqs last  enabled at (275960): [<ffffffff9b270f1f>] __local_bh_enable_ip+0x6f/0xb0
[  140.280931] hardirqs last disabled at (275961): [<ffffffff9be13ca3>] _raw_spin_lock_irqsave+0x63/0x80
[  140.280946] softirqs last  enabled at (275944): [<ffffffffc055288d>] ath11k_ce_send+0x14d/0x260 [ath11k]
[  140.280958] softirqs last disabled at (275953): [<ffffffff9c000f72>] asm_call_irq_on_stack+0x12/0x20
[  140.280971] ---[ end trace 31cb94e18d401398 ]---

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1606156046-24764-1-git-send-email-kvalo@codeaurora.org