- 14 Apr, 2016 40 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== devlink + mlxsw: add support for config and control of shared buffers ASICs implement shared buffer for packet forwarding purposes and enable flexible partitioning of the shared buffer for different flows and ports, enabling non-blocking progress of different flows as well as separation of lossy traffic from loss-less traffic when using Per-Priority Flow Control (PFC). The shared buffer optimizes the buffer utilization for better absorption of packet bursts. This patchset implements API which is based on the model SAI uses. That is aligned with multiple ASIC vendors so this API should be vendor neutral. Userspace counterpart patchset for devlink iproute2 tool can be found here: https://github.com/jpirko/iproute2_mlxsw/tree/devlink_sb Couple of examples of usage: switch$ devlink sb help Usage: devlink sb show [ DEV [ sb SB_INDEX ] ] devlink sb pool show [ DEV [ sb SB_INDEX ] pool POOL_INDEX ] devlink sb pool set DEV [ sb SB_INDEX ] pool POOL_INDEX size POOL_SIZE thtype { static | dynamic } devlink sb port pool show [ DEV/PORT_INDEX [ sb SB_INDEX ] pool POOL_INDEX ] devlink sb port pool set DEV/PORT_INDEX [ sb SB_INDEX ] pool POOL_INDEX th THRESHOLD devlink sb tc bind show [ DEV/PORT_INDEX [ sb SB_INDEX ] tc TC_INDEX ] devlink sb tc bind set DEV/PORT_INDEX [ sb SB_INDEX ] tc TC_INDEX type { ingress | egress } pool POOL_INDEX th THRESHOLD devlink sb occupancy show { DEV | DEV/PORT_INDEX } [ sb SB_INDEX ] devlink sb occupancy snapshot DEV [ sb SB_INDEX ] devlink sb occupancy clearmax DEV [ sb SB_INDEX ] switch$ devlink sb show pci/0000:03:00.0: sb 0 size 16777216 ing_pools 4 eg_pools 4 ing_tcs 8 eg_tcs 8 switch$ devlink sb pool show pci/0000:03:00.0: sb 0 pool 0 type ingress size 12400032 thtype dynamic pci/0000:03:00.0: sb 0 pool 1 type ingress size 0 thtype dynamic pci/0000:03:00.0: sb 0 pool 2 type ingress size 0 thtype dynamic pci/0000:03:00.0: sb 0 pool 3 type ingress size 200064 thtype dynamic pci/0000:03:00.0: sb 0 pool 4 type egress size 13220064 thtype dynamic pci/0000:03:00.0: sb 0 pool 5 type egress size 0 thtype dynamic pci/0000:03:00.0: sb 0 pool 6 type egress size 0 thtype dynamic pci/0000:03:00.0: sb 0 pool 7 type egress size 0 thtype dynamic switch$ devlink sb port pool show sw0p7 pool 0 sw0p7: sb 0 pool 0 threshold 16 switch$ sudo devlink sb port pool set sw0p7 pool 0 th 15 switch$ devlink sb port pool show sw0p7 pool 0 sw0p7: sb 0 pool 0 threshold 15 switch$ devlink sb tc bind show sw0p7 tc 0 type ingress sw0p7: sb 0 tc 0 type ingress pool 0 threshold 10 switch$ sudo devlink sb tc bind set sw0p7 tc 0 type ingress pool 0 th 9 switch$ devlink sb tc bind show sw0p7 tc 0 type ingress sw0p7: sb 0 tc 0 type ingress pool 0 threshold 9 switch$ sudo devlink sb occupancy snapshot pci/0000:03:00.0 switch$ devlink sb occupancy show sw0p7 sw0p7: pool: 0: 82944/3217344 1: 0/0 2: 0/0 3: 0/0 4: 0/384 5: 0/0 6: 0/0 7: 0/0 itc: 0(0): 96768/3217344 1(0): 0/0 2(0): 0/0 3(0): 0/0 4(0): 0/0 5(0): 0/0 6(0): 0/0 7(0): 0/0 etc: 0(4): 0/384 1(4): 0/0 2(4): 0/0 3(4): 0/0 4(4): 0/0 5(4): 0/0 6(4): 0/0 7(4): 0/0 switch$ sudo devlink sb occupancy clearmax pci/0000:03:00.0 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Implement occupancy API introduced in devlink and mlxsw core. This is done by accessing SBPM register for Port-Pool and SBSR for Port-TC current and max occupancy values. Max clear is implemented using the same registers. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
So far it was possible to have one EMAD register access at a time, locked by mutex. This patch extends this interface to allow multiple EMAD register accesses to be in fly at once. That allows faster processing on firmware side avoiding unused time in between EMADs. Measured speedup is ~30% for shared occupancy snapshot operation. Signed-off-by:
-
Jiri Pirko authored
Follow-up patch is going to need to use delayed work as well and frequently. The FDB notification processing is already using that and also quite frequently. It makes sense to create separate workqueue just for mlxsw driver in this case and do not pollute system_wq. Signed-off-by:
-
Jiri Pirko authored
Since it is not possible to get and clear Port-Pool occupancy data using SBSR register, there's a need to implement that using SBPM. Extend pack helper and add unpack helper to get occupancy values. Signed-off-by:
-
Jiri Pirko authored
This register allows to query HW for current and maximal buffer usage. Signed-off-by:
-
Jiri Pirko authored
Add middle layer in mlxsw core code to forward shared buffer occupancy calls into specific ASIC drivers. Signed-off-by:
-
Jiri Pirko authored
Implement previously introduced mlxsw core shared buffer API. For Spectrum, that is done utilizing registers SBPR, SBCM and SBPM. Signed-off-by:
-
Jiri Pirko authored
Needed in following patch. Signed-off-by:
-
Jiri Pirko authored
Although the device supports max_buff magic values 0 and 0xff, these are not exposed to the user via devlink. Therefore, adjust the default values to be within configurable range. Signed-off-by:
-
Jiri Pirko authored
As explained in commit ff6551ec ("mlxsw: spectrum: Correctly configure headroom size") control packets are directed to priority group buffer 9 (PG9) in the ports' headroom buffers. Since we don't want to drop control packets in case they can't be admitted to the switch's shared buffer we bind PG9 to a different ingress pool from the one used by all other PGs. Unlike other PGs, we currently don't expose the binding between PG9 to a pool and leave it fixed. Signed-off-by:
-
Jiri Pirko authored
Since there is no congestion control for CPU port traffic, we can change the CPU port TC binding to pool 0 with min_buff and max_buff zeroed. Remove initialization for pool egress pool 3 since it is no longer used by dafault. Signed-off-by:
-
Jiri Pirko authored
In order to achieve faster dumping of current setting and also in order to provide possibility to get pool mode without a need to query hardware, do cache the configuration in driver. Signed-off-by:
-
Jiri Pirko authored
Be consintent with rest of the registers (pm, cm) and use "pr" here. Signed-off-by:
-
Jiri Pirko authored
Structs are in arrays so use array index as pool/tc/prio index. With that, there is need to maintain separate arrays for ingress and egress. Signed-off-by:
-
Jiri Pirko authored
Pushed them into helper functions. Signed-off-by:
-
Jiri Pirko authored
Add middle layer in mlxsw core code to forward shared buffer calls into specific ASIC drivers. Signed-off-by:
-
Jiri Pirko authored
User needs to monitor shared buffer occupancy. For that, he issues a snapshot command in order to instruct hardware to catch current and maximal occupancy values, and clear command in order to clear the historical maximal values. Also port-pool and tc-pool-bind command response messages are extended to carry occupancy values. Signed-off-by:
-
Jiri Pirko authored
Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: -
stephen hemminger authored
The structure can be packed denser by doing minor rearrangement of existing elements. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Sergei Shtylyov authored
When we have the ISS.CGIS bit set, we already know that gPTP interrupt has happened, so an extra GIS register check at the end of ravb_ptp_interrupt() seems superfluous. We can model the gPTP interrupt handler like all other dedicated interrupt handlers in the driver and make it *void*. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: [mostly] Ethtool RSS configuration Most of the content [code-wise] in this series is for allowing various RSS-related configuration via ethtool. In addition, this also removed an unnecessary versioning scheme between the drivers and bump the driver version. ==================== Signed-off-by: -
Yuval Mintz authored
Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Adds support for the following via ethtool: - UDP configuration of RSS based on 2-tuple/4-tuple. - RSS hash key. - RSS indirection table. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Adds the required API for passing RSS-related configuration from qede. Signed-off-by:
-
Rahul Verma authored
Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by:
Rahul Verma <rahul.verma@qlogic.com> Signed-off-by:
-
-
Eric Dumazet authored
After introduction of ndo_features_check(), we believe that very specific checks for rare features should not be done in core networking stack. No driver uses gso_min_segs yet, so we revert this feature and save few instructions per tx packet in fast path. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Julia Lawall authored
The meta_type_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Petri Gynther authored
Add Byte Queue Limits (BQL) support to bcmgenet driver. Signed-off-by:
Petri Gynther <pgynther@google.com> Signed-off-by:
-
Florian Fainelli authored
bcmgenet_isr1() and bcmgenet_isr0() run in hard irq context, we do not need to block irq again. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
By using napi_complete_done(), we allow fine tuning of /sys/class/net/ethX/gro_flush_timeout for higher GRO aggregation efficiency for a Gbit NIC. Check commit 24d2e4a5 ("tg3: use napi_complete_done()") for details. Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: delay calls to sk_data_ready() as much as possible 1st patch is a preparation for the 2nd. The idea is to not call ->sk_data_ready() for every data chunk processed while processing packets but only once before releasing the socket. v2: patchset re-checked, small changelog fixes v3: on patch 2, make use of local vars to make it more readable ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
Currently processing of multiple chunks in a single SCTP packet leads to multiple calls to sk_data_ready, causing multiple wake up signals which are costy and doesn't make it wake up any faster. With this patch it will note that the wake up is pending and will do it before leaving the state machine interpreter, latest place possible to do it realiably and cleanly. Note that sk_data_ready events are not dependent on asocs, unlike waking up writers. v2: series re-checked v3: use local vars to cleanup the code, suggested by Jakub Sitnicki Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
It wastes space and gets worse as we add new flags, so convert bit-wide flags to a bitfield. Currently it already saves 4 bytes in sctp_sock, which are left as holes in it for now. The whole struct needs packing, which should be done in another patch. Note that do_auto_asconf cannot be merged, as explained in the comment before it. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Denys Vlasenko authored
This function compiles to 895 bytes of machine code. Clearly, this isn't a time-critical function. For one, it has a number of udelay(1) calls. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== bridge: support sending rntl info when we set attributes through sysfs/ioctl This patchset is used to support sending rntl info to user in some places, and ensure that whenever those attributes change internally or from sysfs, that a netlink notification is sent out to listeners. It also make some adjustment in bridge sysfs so that we can implement this easily. I've done some tests on this patchset, like: [br_sysfs] 1. change all the attribute values of br or brif: $ echo $value > /sys/class/net/br0/bridge/{*} $ echo $value > /sys/class/net/br0/brif/eth1/{*} 2. meanwhile, on another terminal to observe the msg: $ bridge monitor [br_ioctl] 1. in bridge-utils package, do some changes in br_set, let brctl command use ioctl to set attribute: if ((ret = set_sysfs(path, value)) < 0) { --> if (1) { $ brctl set* 2. meanwhile, on another terminal to observe the msg: $ bridge monitor This test covers all the attributes that brctl and sysfs support to set. ==================== Signed-off-by: -
Xin Long authored
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent. We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners. Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration. This patch is used for ioctl. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Xin Long authored
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent. We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners. Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration. This patch is used for br_sysfs_if, and we also move br_ifinfo_notify out of store_flag. Signed-off-by:
-
Xin Long authored
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent. We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners. Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration. This patch is used for br_sysfs_br. and we also need to remove some rtnl_trylock in old functions so that we can call it in a common one. For group_addr_store, we cannot make it use store_bridge_parm, because it's not a string-to-long convert, we will add notification on it individually. Signed-off-by:
-
