- 27 Jul, 2021 20 commits
-
-
Jiri Slaby authored
Since commit f34d7a5b (tty: The big operations rework) in 2008, tty_set_operations() is a simple one-line assignment. There is no reason for this to be an exported function, hence move it to a header and make an inline from that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-7-jslaby@suse.czSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
Noone uses this deprecated function now. So we can remove it. Signed-off-by:
-
Jiri Slaby authored
alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a6 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson <rth@twiddle.net>(odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by:
Samuel Iglesias Gonsálvez <siglesias@igalia.com> Acked-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
David Sterba <dsterba@suse.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Jiri Slaby authored
When a tty driver pointer is used as a return value of struct console's device() hook, don't store a semi-state into global variable which holds the tty driver. It could mean console::device() would return a bogus value. This is important esp. after the next patch where we switch from alloc_tty_driver to tty_alloc_driver. tty_alloc_driver returns ERR_PTR in case of error and that might have unexpected results as the code doesn't expect this. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by:
-
Jiri Slaby authored
The alloc_tty_driver failure is handled gracefully in hvsi_init. But tty_register_driver is not. panic is called if that one fails. So handle the failure of tty_register_driver gracefully too. This will keep at least the console functional as it was enabled earlier by console_initcall in hvsi_console_init. Instead of shooting down the whole system. This means, we disable interrupts and restore hvsi_wait back to poll_for_state(). Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Jiri Slaby authored
While alloc_tty_driver failure in rs_init would mean we have much bigger problem, there is no reason to panic when tty_register_driver fails there. It can fail for various reasons. So handle the failure gracefully. Actually handle them both while at it. This will make at least the console functional as it was enabled earlier by console_initcall in iss_console_init. Instead of shooting down the whole system. We move tty_port_init() after alloc_tty_driver(), so that we don't need to destroy the port in case the latter function fails. Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Acked-by:
-
Jiri Slaby authored
tty_flip.h currently includes whole tty.h. In fact, it needs only tty_buffer and tty_port definitions. Provided, we separated tty_buffer and tty_port into separate headers in the previous patch, we can make tty_flip.h to include only much lighter tty_buffer.h and tty_port.h. Signed-off-by:
-
Jiri Slaby authored
tty.h is long enough already. And I am slowly adding kernel-doc documentation, so it grows to unmaintainable long mess. To avoid this, split tty.h further into tty_port.h and move there tty_port-related declarations and function prototypes (those implemented in tty_port.c). Signed-off-by:
-
Jiri Slaby authored
tty.h is large enough currently. And I am slowly adding kernel-doc documentation, so it grows to unmaintainable long mess. To avoid this, split tty.h further into tty_buffer.h and move there tty_buffer-related declarations and function prototypes. Note that many of the tty_buffer.c function prototypes reside now in tty_flip.h. But we cannot move struct tty_buffer & friends because: * tty_insert_flip_char() in tty_flip.h needs both struct tty_port and struct tty_buffer defined. * struct tty_port in tty_port.h needs struct tty_buffer defined. So if we moved struct tty_buffer to tty_flip.h too, tty_flip.h would need tty_port.h and that would need tty_flip.h (to have tty_buffer) again. Hence we introduce new header tty_buffer.h here to break this circular dependency. Signed-off-by:
-
Jiri Slaby authored
It's the only remaining tty_buffer.c prototype residing in tty.h. Move it along others to tty_flip.h. Signed-off-by:
-
Jiri Slaby authored
We use structs list_head and lockdep_map as non-pointers in tty_ldisc.h. So better have headers defining them explicitly included so that the structs are always defined. Not only implicitly via random include chains. Signed-off-by:
-
Jiri Slaby authored
We already have tty_ldisc.h, so cleanup tty.h a bit by moving out tty_ldisc-related function prototypes and a variable into tty_ldisc.h. They are implemented in tty_ldisc.c anyway. Signed-off-by:
-
Jiri Slaby authored
We use kref in tty_driver.h, but do not include kref.h. It is currently included by linux/cdev.h -> linux/kobject.h -> linux/kref.h chain, so everything is in order only implicitly. So make this dependency explicit. Signed-off-by:
-
Jiri Slaby authored
We already have tty_driver.h, so cleanup tty.h a bit by moving out tty_driver-related function prototypes into tty_driver.h. Note that tty.h already includes tty_driver.h. Signed-off-by:
-
Jiri Slaby authored
There is no need to have an extra pointer to a string (v253_init). Convert it to an array. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by:
-
Jiri Slaby authored
TTY layer does nothing if tty_ldisc_ops::write_wakeup is NULL, so there is no need to implement an empty one in cx20442. Drop it. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by:
-
Andy Shevchenko authored
Dennis reported that on ACPI-based systems the clock frequency isn't enough to configure device properly. We have to respect the clock source as well. To achieve this match the clock-names property against "osc" to recognize external clock connection. On DT-based system this doesn't change anything. Reported-and-tested-by:
Dennis Giaya <dgiaya@whoi.edu> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210723125943.22039-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
PSE UARTs on Intel Elkhart Lake support DMA mode. Enable DMA on these ports. Signed-off-by:
-
Linus Walleij authored
The Intel IXP425 Vulcan board has an Exar XR16L2551 8250-compatible. It works like an 8250 but it is always good to specify exactly which component we are using. This allows us to specify: compatible = "exar,xr16l2551", "ns8250"; Put in some sibling Exar serial compatibles while we're at it. Cc: Marc Zyngier <maz@kernel.org> Cc: devicetree@vger.kernel.org Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210716225319.1282704-1-linus.walleij@linaro.orgSigned-off-by:
-
Maciej W. Rozycki authored
Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by:Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.ukSigned-off-by:
-
- 21 Jul, 2021 20 commits
-
-
Juergen Gross authored
Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.comSigned-off-by:
-
Jiri Slaby authored
'state' variable is only set but never read in amiserial's shutdown. Drop it. It was like this since the driver was added to the tree as far as I can tell. Signed-off-by:
-
Jiri Slaby authored
amiserial deals only with a single serial, so drop the rs_table array and NR_PORTS and define a single non-array serial_state for simplicity instead. Signed-off-by:
-
Jiri Slaby authored
The #include directives are in different places in amiserial: 1) there is no reason for that, and 2) it makes hard to judge what is included and what is not. Therefore, move all the includes to a single place and sort them. Signed-off-by:
-
Jiri Slaby authored
"custom" macro is a too generic name. Expand it -- that is use amiga_custom on all the locations. Signed-off-by:
-
Jiri Slaby authored
Having a macro (serial_isroot) for capable(CAP_SYS_ADMIN) does not save us from anything. It rather obfuscates the code. Hence expand serial_isroot to be explicit like every other driver is. Signed-off-by:
-
Jiri Slaby authored
Zeroing each member of struct serial_state in probe is fragile and overly complicated. Do one memset for them all. Signed-off-by:
-
Jiri Slaby authored
tty->port is already set when rs_open is called given we linked it by tty_port_link_device(). If it wasn't, the tty layer would WARN loudly. So it's pointless to set it in rs_open. Instead, use the value in tty->port to find out the serial_state (info). It's a fallout of commit b19e2ca7 (TTY: use tty_port_link_device) which added tty_port_link_device here, but omitted to remove the tty->port assignment from rs_open. Signed-off-by:
-
Jiri Slaby authored
It's always 1, so define a macro for it instead. Note that the check in set_serial_info is doubled, hence remove the latter. Signed-off-by:
-
Jiri Slaby authored
The comment about interrupt routines is stale at least since commit 41c28ff1 (kill _INLINE_) from 2006. So remove the obsolete parts and leave only "here they start...". Signed-off-by:
-
Jiri Slaby authored
Remove a print of serial_name and serial_version from the probe function, i.e. show_serial_version() from amiga_serial_probe(). The value of such a print is minimal. Aside from that, the version is artificial (copied from the serial core in 2.3.45pre2 and never increased). So inline the version into seq_printf's format string in rs_proc_show() and remove both strings completely. Signed-off-by:
-
Jiri Slaby authored
The ugly DBG_CNT macro is unused, so remove. Signed-off-by:
-
Andy Shevchenko authored
For the sake of reducing layering violation add ->unregister_gpio() callback and use it in the ->exit() one. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210719102421.14813-1-colin.king@canonical.comSigned-off-by:
-
Nobuhiro Iwamatsu authored
Convert serial for Cadence UART bindings documentation to YAML. Reviewed-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20210715092252.225740-1-iwamatsu@nigauri.orgSigned-off-by:
-
Shubhrajyoti Datta authored
In the commit 07e5d4ff ("Revert serial-uartlite: Add runtime support") the runtime pm support was reverted to aid reverting of the other patches. This patch adds the runtime PM support back. The runtime pm calls are used to gate and enable the clocks. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20210713064835.27978-3-shubhrajyoti.datta@xilinx.comSigned-off-by:
-
Shubhrajyoti Datta authored
In case the uart registration fails the clocks are left enabled. Disable the clock in case of errors. Signed-off-by:
-
Igor Matheus Andrade Torrente authored
This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com Signed-off-by:
Igor Matheus Andrade Torrente <igormtorrente@gmail.com> Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.comSigned-off-by:
-
Tamseel Shams authored
When DMA is used for TX and RX by serial driver, it should pass the DMA device pointer to DMA API instead of UART device pointer. DMA device should be used for DMA API because only the DMA device is aware of how the device connects to the memory. There might be an extra level of address translation due to a SMMU attached to the DMA device. When serial device is used for DMA API, the DMA API will have no clue of the SMMU attached to the DMA device. This patch is necessary to fix the SMMU page faults which is observed when a DMA(with SMMU enabled) is attached to UART for transfer. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Tamseel Shams <m.shams@samsung.com> Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Link: https://lore.kernel.org/r/20210629045902.48912-1-m.shams@samsung.comSigned-off-by:
-
Bing Fan authored
In order to make pl011 work better, multiple interrupts are required, such as TXIM, RXIM, RTIM, error interrupt(FE/PE/BE/OE); at the same time, pl011 to GIC does not merge the interrupt lines(each serial-interrupt corresponding to different GIC hardware interrupt), so need to enable and request multiple gic interrupt numbers in the driver. Signed-off-by:
Bing Fan <tombinfan@tencent.com> Link: https://lore.kernel.org/r/1625103512-30182-1-git-send-email-hptsfb@gmail.comSigned-off-by:
-
