- 11 Sep, 2023 14 commits
-
-
Alvin Lee authored
[Description] - When disabling a phantom pipe, we first enable the phantom OTG so the double buffer update can successfully take place - However, want to avoid locking the phantom otherwise setting DPG_EN=1 for the phantom pipe is blocked (without this we could hit underflow due to phantom HUBP being blanked by default) Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Stylon Wang <stylon.wang@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[Description] Before enabling the phantom OTG for an update we must enable DPG to avoid underflow. Reviewed-by:
-
Mukul Joshi authored
The CU mask passed from user-space will change based on different spatial partitioning mode. As a result, update CU masking code for GFX9.4.3 to work for all partitioning modes. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
Update cache info reporting in sysfs to report the correct number of CUs and associated cache information based on different spatial partitioning modes. Signed-off-by:
-
Tao Zhou authored
Get UMC phyical channel index according to node id, umc instance and channel instance. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Yang Wang authored
v1: enable smu_v13_0_6 mca debug mode when UMC RAS feature is enabled. v2: use amdgpu_ras_is_supported() helper function instead bitmask check. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
-
Yang Wang authored
update smu firmware header to support smu mca debug feature. Signed-off-by:
-
Tao Zhou authored
Convert MCA error address to physical address and find out all pages in one physical row. Signed-off-by:
-
Lijo Lazar authored
When reset method is not passed in reset context, look for the handler for default reset method. On Aldebaran, default reset method for SOCs connected to CPU over XGMI is MODE2. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Asad Kamal <asad.kamal@amd.com> Tested-by:
-
Mukul Joshi authored
Currently, we store CU info only for a single XCC assuming that it is the same for all XCCs. However, that may not be true. As a result, store CU info for all XCCs. This info is later used for CU masking. Signed-off-by:
-
Ma Jun authored
[1] Remove the irq flags setting code since pci_alloc_irq_vectors() handles these flags. [2] Free the msi vectors in case of error. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lang Yu authored
Fixes: 5d5eac7e ("drm/amdgpu: add selftest framework for UMSCH") Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/all/ZPhddADtKmOuVyDq@lang-desktopSigned-off-by:
-
Mukul Joshi authored
This patch fixes the following unaligned 64-bit doorbell warning seen when submitting packets on HIQ on GFX v9.4.3 by making the HIQ doorbell 64-bit aligned. The warning is seen when GPU is loaded in any mode other than SPX mode. [ +0.000301] ------------[ cut here ]------------ [ +0.000003] Unaligned 64-bit doorbell [ +0.000030] WARNING: /amdkfd/kfd_doorbell.c:339 write_kernel_doorbell64+0x72/0x80 [ +0.000003] RIP: 0010:write_kernel_doorbell64+0x72/0x80 [ +0.000004] RSP: 0018:ffffc90004287730 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ +0.000003] RDX: 0000000000000001 RSI: ffffffff82837c71 RDI: 00000000ffffffff [ +0.000003] RBP: ffffc90004287748 R08: 0000000000000003 R09: 0000000000000001 [ +0.000002] R10: 000000000000001a R11: ffff88a034008198 R12: ffffc900013bd004 [ +0.000003] R13: 0000000000000008 R14: ffffc900042877b0 R15: 000000000000007f [ +0.000003] FS: 00007fa8c7b62000(0000) GS:ffff889f88400000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056111c45aaf0 CR3: 00000001414f2002 CR4: 0000000000770ee0 [ +0.000003] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000004] <TASK> [ +0.000006] kq_submit_packet+0x45/0x50 [amdgpu] [ +0.000524] pm_send_set_resources+0x7f/0xc0 [amdgpu] [ +0.000500] set_sched_resources+0xe4/0x160 [amdgpu] [ +0.000503] start_cpsch+0x1c5/0x2a0 [amdgpu] [ +0.000497] kgd2kfd_device_init.cold+0x816/0xb42 [amdgpu] [ +0.000743] amdgpu_amdkfd_device_init+0x15f/0x1f0 [amdgpu] [ +0.000602] amdgpu_device_init.cold+0x1813/0x2176 [amdgpu] [ +0.000684] ? pci_bus_read_config_word+0x4a/0x80 [ +0.000012] ? do_pci_enable_device+0xdc/0x110 [ +0.000008] amdgpu_driver_load_kms+0x1a/0x110 [amdgpu] [ +0.000545] amdgpu_pci_probe+0x197/0x400 [amdgpu] Fixes: c3186665 ("drm/amdgpu: use doorbell mgr for kfd kernel doorbells") Signed-off-by:
-
Mukul Joshi authored
This patch fixes the case where the code currently passes absolute register address and not the reg offset, which HWS expects, when sending the PM4 packet to set/update CWSR grace period. Additionally, cleanup the signature of build_grace_period_packet_info function as it no longer needs the inst parameter. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
- 06 Sep, 2023 26 commits
-
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn35/dcn35_fpu.c:260 dcn35_update_bw_bounding_box_fpu() warn: inconsistent indenting Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Candice Li authored
Add umc v12_0 ras error querying. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Lijo Lazar authored
SMU v13.0.6 SOCs have 100MHz reference clock. Signed-off-by:
-
Hawking Zhang authored
gfx_v9_4_3_ue|ce_reg_list is an array per gfx core instance correct the settings of se_num and reg_inst for some of gfx ras counters so all the available register instances can be polled for ras status. Signed-off-by:
-
Lijo Lazar authored
Restrict the wait for boot loader steady state only to SMUv13.0.6. For older SOCs, ASIC init has a longer wait period and that takes care. Signed-off-by:
-
Lijo Lazar authored
Show only firmware version attributes that have valid version. Hide others. Signed-off-by:
-
Lang Yu authored
Use proper type. Fixes: 9d4346bd ("drm/amdgpu: add VPE 6.1.0 support") Signed-off-by:
Solomon Chiu <solomon.chiu@amd.com> Reviewed-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202309020608.FwP8QMht-lkp@intel.comSigned-off-by:
-
Srinivasan Shanmugam authored
Use min_t to replace min, min_t is a bit fast because min use twice typeof. And using min_t is cleaner here since the min/max macros do a typecheck while min_t()/max_t() to an explicit type cast. Fixes the below checkpatch warning: WARNING: min() should probably be min_t() Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by:
-
Candice Li authored
Add umc v12_0_0 ip headers. Signed-off-by:
-
Candice Li authored
Only calculate pcie_index_hi for register address greater than 32bits. Signed-off-by:
-
Candice Li authored
Add 64bits register access support on register whose address is greater than 32bits. Signed-off-by:
-
Srinivasan Shanmugam authored
This warning is for the declaration of a static array, and it is recommended to declare it as type "static const char * const" instead of "static const char *". an array pointer declared as type "static const char *" can point to a different character constant because the pointer is mutable. However, if it is declared as type "static const char * const", the pointer will point to an immutable character constant, preventing it from being modified which can better ensure the safety and stability of the program. Fixes the below: WARNING: static const char * array should probably be static const char * const Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
-
Darren Powell authored
split switch statement into two and consolidate the common code for printing most of the types of clock speeds Signed-off-by:
Darren Powell <darren.powell@amd.com> Reviewed-by:
-
Darren Powell authored
Use variables to remove ternary expression in print statement and improve readability. This will help to optimize the code duplication in the switch statement Also Changed: replaced single_dpm_table->count as iterator in for loops with safer clocks_num_levels value replaced dpm_table.value usage with local var clocks_mhz Signed-off-by: -
Darren Powell authored
Use variables to remove the multiple nested ternary expressions and improve readability. This will help to optimize the code duplication in the switch statement Also Changed: Modify function aldebaran_get_clk_table to void function as it always returns 0 Use const string "attempt_string" to cut down on repetition Signed-off-by: -
Darren Powell authored
Replace print_clock_levels with emit_clock_levels for aldebaran * replace .print_clk_levels with .emit_clk_levels in aldebaran_ppt_funcs * added extra parameter int *offset * removed var size, uses arg *offset instead * removed call to smu_cmn_get_sysfs_buf * errors are returned to caller * returns 0 on success additional incidental changes * changed type of vars i, now to remove comparing mismatch types * renamed var s/now/cur_value/ * switch statement default now returns -EINVAL * RAS Recovery returns -EBUSY Based on commit b06b48d7 ("amdgpu/pm: Implement emit_clk_levels for navi10") Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c:288 dcn35_update_clocks() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_hwseq.c:159 dcn35_init_hw() warn: inconsistent indentig Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_resource.c:1877 dcn35_resource_construct() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:355 dmub_srv_hw_setup() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c: dcn35_clk_mgr.h is included more than once. Signed-off-by:
-
Hamza Mahfooz authored
There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263 ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e ("drm/amd/display: Reinstate LFC optimization") Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_hwseq.c: clk_mgr.h is included more than once. Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_optc.c: dcn35_optc.h is included more than once. Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c: dcn31/dcn31_dio_link_encoder.h is included more than once. Signed-off-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c:34 nbio_v7_11_get_rev_id() warn: inconsistent indenting. v2: drop leftover printk (Alex) Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6316Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
