This fixes a crash when we reload Nouveau DRM.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The DMA API is the recommended way to map pages no matter what the
underlying bus is. Use the DMA functions for page mapping and remove
currently existing wrappers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Detect and workaround the absence of a power device so chips that do not
feature one (e.g. GK20A) can still use this driver.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GK20A's BAR is functionally identical to NVC0's, but do not support
being ioremapped write-combined. Create a BAR instance for GK20A that
reflect that state.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Some BARs (like GK20A's) do not support being ioremapped write-combined.
Add a boolean property to the BAR structure and handle that case in the
Nouveau BO implementation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

Add a platform driver for Nouveau devices declared using the device tree
or platform data. This driver currently supports GK20A on Tegra
platforms and is only compiled for these platforms if Nouveau is
enabled.

Nouveau will probe the chip type itself using the BOOT0 register, so all
this driver really needs to do is to make sure the module is powered and
its clocks active before calling nouveau_drm_platform_probe().

Heavily based on work done by Thierry Reding.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This *should* be safe these days.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

echo ac:id >> pstate # select mode when on mains power
echo dc:id >> pstate # select mode when on battery
echo id >> pstate # select mode for both
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2:
- s/init/fini/ typo, reported by Alex
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As a side note.. It's a bit hard to figure out how to name this commit..
GK20A is NVEA, which is before NV108 (GK208).. Confusing.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This removes the previous hack that worked on some boards.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As documented at:

ftp://download.nvidia.com/open-gpu-doc/gk104-disable-graphics-power-gating/1/gk104-disable-graphics-power-gating.txt

NVIDIA were not able document the steps necessary to detect whether this
is required or not at this time.  However, they did confirm that this
procedure is safe to perform unconditionally on GK104/6.  GK107 does not
have the power gating feature, and it was recommended that we do not
perform these steps there as the effects were not verified.

The disable path is from observing the binary driver, and not
documented in the link above.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pages allocated using the DMA API have a coherent memory mapping. Make
this mapping visible to drivers so they can decide to use it instead of
creating their own redundant one.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This reverts commit 48ba8137.

Thanks to Chris:
"drm_file->is_master is not synomous with having drm_file->master ==
drm_file->minor->master. This is because drm_file->master is the same
for all drm_files of the same generation and so when there is a master,
every drm_file believes itself to be the master. Confusion ensues and
things go pear shaped when one file is closed and there is no master
anymore."

Conflicts:
	drivers/gpu/drm/drm_drv.c
	drivers/gpu/drm/drm_stub.c

drm/tegra: Changes for v3.17-rc1

Mostly some cleanup all over the place. Pitch alignment limitations of
the display controller are now honored and job submission is 64-bit
safe.

The SOR output (used for eDP) properly configures sync signal polarities
according to the display mode rather than hard-coding them to some value
and the number of bits per color is now taken from the panel rather than
hard-coded to properly support 24-bit vs. 18-bit panels.

The DSI controller now properly supports non-continuous clock mode.

GEM objects can now have their flags and tiling mode modified via IOCTLs
to allow buffers imported from Nouveau to be properly displayed. Newer
generations of the Tegra display controller can also detile block linear
buffers at scan-out time.

Finally the driver now properly exports MODULE_DEVICE_TABLEs to allow it
to be automatically loaded when built as a module.

* tag 'drm/tegra/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: add MODULE_DEVICE_TABLEs
  drm/tegra: dc - Reset controller on driver remove
  drm/tegra: Properly align stride for framebuffers
  drm/tegra: sor - Configure proper sync polarities
  drm/tegra: sor - Use bits-per-color from panel
  drm/tegra: Make job submission 64-bit safe
  drm/tegra: Allow non-authenticated processes to create buffer objects
  drm/tegra: Add SET/GET_FLAGS IOCTLs
  drm/tegra: Add SET/GET_TILING IOCTLs
  drm/tegra: Implement more tiling modes
  drm/tegra: dsi - Handle non-continuous clock flag
  drm/tegra: sor - missing unlock on error

drm/panel: Changes for v3.17-rc1

Panels can now be more finely controlled via .prepare() and .unprepare()
callbacks in addition to .enable() and .disable(). New kerneldoc details
what they are supposed to do and when they should be called.

The simple panel driver gained support for a couple of new panels and it
is now possible to specify additional delays during power up and power
down sequences if panels require it.

DSI devices can now advertise that they support non-continuous clock
mode which will allow DSI host controllers to disable the high speed
clock after transmissions to save power.

* tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: (30 commits)
  drm/panel: simple: Use devm_gpiod_get_optional()
  drm/dsi: Replace upcasting macro by function
  drm/panel: ld9040: Replace upcasting macro by function
  drm/exynos: dp: Modify driver to support drm_panel
  drm/exynos: Move DP setup into commit()
  drm/panel: simple: Add AUO B133HTN01 panel support
  drm/panel: simple: Support delays in panel functions
  drm/panel: simple: Add proper definition for prepare and unprepare
  drm/panel: s6e8aa0: Add proper definition for prepare and unprepare
  drm/panel: ld9040: Add proper definition for prepare and unprepare
  drm/tegra: Add support for panel prepare and unprepare routines
  drm/exynos: dsi: Add support for panel prepare and unprepare routines
  drm/exynos: dpi: Add support for panel prepare and unprepare routines
  drm/panel: simple: Add dummy prepare and unprepare routines
  drm/panel: s6e8aa0: Add dummy prepare and unprepare routines
  drm/panel: ld9040: Add dummy prepare and unprepare routines
  drm/panel: Provide convenience wrapper for .get_modes()
  drm/panel: add .prepare() and .unprepare() functions
  drm/panel: simple: Remove simple-panel compatible
  drm/panel: simple: Add Innolux N116BGE panel support
  ...

Use the new devm_gpiod_get_optional() to simplify the probe code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Using a function instead of a macro provides proper type checking.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Using a function instead of a macro provides proper type checking.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add drm_panel controls to support powerup/down of the
eDP panel, if one is present at the sink side.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add commit callback for exynos_dp, and move the DP link training,
video configuration code from the hotplug handler into commit().
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The AUO B133HTN01 is a 13.6" FHD TFT LCD panel connecting to an eDP
interface and with an integrated LED backlight unit.

This panel is used on the Samsung Chromebook 2 (XE503C32).
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

For most of the panels, we need to provide delays during various stages
of panel power up and power down. Add a structure to hold those delay
values and use them in corresponding functions.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move out code from enable and disable routines to prepare
and unprepare routines, so that functionality is properly
distributed across all the panel functions.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move out code from enable and disable routines to prepare
and unprepare routines, so that functionality is properly
distributed across all the panel functions.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move out code from enable and disable routines to prepare
and unprepare routines, so that functionality is properly
distributed across all the panel functions.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify tegra output driver to support the new panel calls:
prepare and unprepare.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify exynos_dsi driver to support the new panel calls:
prepare and unprepare.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify exynos_dpi driver to support the new panel calls:
prepare and unprepare.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch adds dummy definition for prepare and unprepare
routines to simple panel driver.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch adds dummy definition for prepare and unprepare
routines to s6e8aa0 panel driver.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch adds dummy definition for prepare and unprepare
routines to ld9040 panel driver.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add a convenience wrapper for the struct drm_panel_funcs' .get_modes()
function so that not every driver needs to check that the panel driver
implements the function before calling it.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
[treding: extract from larger patch, commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>

Panels often require an initialization sequence that consists of three
steps: a) powering up the panel, b) starting transmission of video data
and c) enabling the panel (e.g. turn on backlight). This is usually
necessary to avoid visual glitches at the beginning of video data
transmission.

Similarly, the shutdown sequence is typically done in three steps as
well: a) disable the panel (e.g. turn off backlight), b) cease video
data transmission and c) power down the panel.

Currently drivers can only implement .enable() and .disable() functions,
which is not enough to implement the above sequences. This commit adds a
second pair of functions, .prepare() and .unprepare() to allow more
fine-grained control over when the above steps are performed.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
[treding: rewrite changelog, add kerneldoc]
Signed-off-by: Thierry Reding <treding@nvidia.com>