- 11 Dec, 2014 40 commits
-
-
Johan Hovold authored
Add helper to read raw BCD time that can be used in interrupt context. Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johan Hovold authored
Some legacy RTC IP revisions has a power-up reset flag in the status register that later revisions lack. As this flag is always read back as set on later revisions (or is overloaded with a different flag), make sure to only clear the flag and print the info message on legacy platforms. Signed-off-by:
-
Johan Hovold authored
Add structured device-type info to encode IP-block revision differences. Signed-off-by:
-
Johan Hovold authored
Remove DRIVER_NAME macro which was used for unrelated strings (e.g. id-table entry and module name), but not for related ones (e.g. module name and alias). Also move the module alias to the other module-info entries. Signed-off-by:
-
Johan Hovold authored
Add struct omap_rtc to hold previously global data as well as the IP-block feature flags. Also convert the register-access macros to proper inline helper functions. Signed-off-by:
-
Johan Hovold authored
Make platform-device id table const. Signed-off-by:
-
Johan Hovold authored
Use dev_info rather than pr_info. Signed-off-by:
-
Johan Hovold authored
Remove register-base define, which is no longer used. Signed-off-by:
-
Johan Hovold authored
Make sure not to register the class device until after the device has been configured. Currently, the device is not fully configured (e.g. 24-hour mode) when the class device is registered, something which involves driver callbacks for example to read the current time. Signed-off-by:
-
Johan Hovold authored
Remove some debug messages and return errors from subsystems rather than always fail with -EIO. Note that the class-registration error has already been logged by rtc core. Signed-off-by:
-
Johan Hovold authored
Use writel instead of writeb when disabling interrupts at probe as ALARM2 is not cleared otherwise on some IP-block revisions (e.g. AM3352). Note that the driver currently never enables the ALARM2 interrupt. Signed-off-by:
-
Johan Hovold authored
The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by:
-
Johan Hovold authored
This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by:
-
Hyogi Gim authored
Some rtc devices always return '0' when rtc_class_ops.read_time is called. So if rtc_time isn't verified in callback, rtc interface cannot know whether rtc_time is valid. Check rtc_time by using 'rtc_valid_tm' in '__rtc_read_time'. And add the message for debugging. Signed-off-by:
Hyogi Gim <hyogi.gim@lge.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Guo Zeng authored
Move rtc register to be later than hardware initialization. The reason is that devm_rtc_device_register() will do read_time() which is a callback accessing hardware. This sometimes causes a hang in the hardware related callback. Signed-off-by:
Guo Zeng <guo.zeng@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
If some error happens in NCP_IOC_SETROOT ioctl, the appropriate error return value is then (in most cases) just overwritten before we return. This can result in reporting success to userspace although error happened. This bug was introduced by commit 2e54eb96 ("BKL: Remove BKL from ncpfs"). Propagate the errors correctly. Coverity id: 1226925. Fixes: 2e54eb96 ("BKL: Remove BKL from ncpfs") Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andy Lutomirski authored
If a user puts init=/whatever on the command line and /whatever can't be run, then the kernel will try a few default options before giving up. If init=/whatever came from a bootloader prompt, then this is unexpected but probably harmless. On the other hand, if it comes from a script (e.g. a tool like virtme or perhaps a future kselftest script), then the fallbacks are likely to exist, but they'll do the wrong thing. For example, they might unexpectedly invoke systemd. This adds a config option CONFIG_INIT_FALLBACK. If unset, then a failure to run the specified init= process be fatal. The tentative plan is to remove CONFIG_INIT_FALLBACK for 3.20. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Rob Landley <rob@landley.net> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jungseung Lee authored
vma_dump_size() has been used several times on actual dumper and it is supposed to return the same value for the same vma. But vma_dump_size() could return different values for same vma. The known problem case is concurrent shared memory removal. If a vma is used for a shared memory and that shared memory is removed between writing program header and dumping vma memory, this will result in a dump file which is internally consistent. To fix the problem, we set baseline to get dump size and store the size into vma_filesz and always use the same vma dump size which is stored in vma_filsz. The consistnecy with reality is not actually guranteed, but it's tolerable since that is fully consistent with base line. Signed-off-by:
Jungseung Lee <js07.lee@gmail.com> Signed-off-by:
-
Andrew Morton authored
GFP_USER means "honour cpuset nodes-allowed beancounting". These are regular old kernel objects and there seems no reason to give them this treatment. Acked-by:
Mike Frysinger <vapier@gentoo.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Mike Frysinger authored
Clean up various coding style issues that checkpatch complains about. No functional changes here. Signed-off-by:
-
Mike Frysinger authored
When trying to develop a custom format handler, the errors returned all effectively get bucketed as EINVAL with no kernel messages. The other errors (ENOMEM/EFAULT) are internal/obvious and basic. Thus any time a bad handler is rejected, the developer has to walk the dense code and try to guess where it went wrong. Needing to dive into kernel code is itself a fairly high barrier for a lot of people. To improve this situation, let's deploy extensive pr_debug markers at logical parse points, and add comments to the dense parsing logic. It let's you see exactly where the parsing aborts, the string the kernel received (useful when dealing with shell code), how it translated the buffers to binary data, and how it will apply the mask at runtime. Some example output: $ echo ':qemu-foo:M::\x7fELF\xAD\xAD\x01\x00:\xff\xff\xff\xff\xff\x00\xff\x00:/usr/bin/qemu-foo:POC' > register $ dmesg binfmt_misc: register: received 92 bytes binfmt_misc: register: delim: 0x3a {:} binfmt_misc: register: name: {qemu-foo} binfmt_misc: register: type: M (magic) binfmt_misc: register: offset: 0x0 binfmt_misc: register: magic[raw]: 5c 78 37 66 45 4c 46 5c 78 41 44 5c 78 41 44 5c \x7fELF\xAD\xAD\ binfmt_misc: register: magic[raw]: 78 30 31 5c 78 30 30 00 x01\x00. binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 66 66 5c 78 66 66 5c 78 66 66 \xff\xff\xff\xff binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 30 30 5c 78 66 66 5c 78 30 30 \xff\x00\xff\x00 binfmt_misc: register: mask[raw]: 00 . binfmt_misc: register: magic/mask length: 8 binfmt_misc: register: magic[decoded]: 7f 45 4c 46 ad ad 01 00 .ELF.... binfmt_misc: register: mask[decoded]: ff ff ff ff ff 00 ff 00 ........ binfmt_misc: register: magic[masked]: 7f 45 4c 46 ad 00 01 00 .ELF.... binfmt_misc: register: interpreter: {/usr/bin/qemu-foo} binfmt_misc: register: flag: P (preserve argv0) binfmt_misc: register: flag: O (open binary) binfmt_misc: register: flag: C (preserve creds) The [raw] lines show us exactly what was received from userspace. The lines after that show us how the kernel has decoded things. Signed-off-by: -
Joe Perches authored
Add --fix option to coalesce string fragments. This does not coalesce string fragments that have newline terminations or are otherwise exempted. Other miscellanea: o move all the string tests together. o fix get_quoted_string function for tab characters o fix concatination typo Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Joe Perches authored
It seems there are more and more uses of "if (!ptr)" in preference to "if (ptr == NULL)" so add a --strict test to emit a message when using the latter form. This also finds (ptr != NULL). Fix it too if desired. Signed-off-by:
-
Joe Perches authored
Emit a warning when single line string coalescing occurs. Code that uses compiler string concatenation on a single line like: printk("foo" "bar"); is generally better to read concatenated like: printk("foobar"); Signed-off-by: -
Joe Perches authored
Using BIT(foo) and BIT_ULL(bar) is more common now. Suggest using these macros over #defines with 1<<value. Add a --fix option too. Signed-off-by:
-
Julius Werner authored
Checkpatch flags CamelCase identifiers in strict mode, but it has a feature to ignore parts with only two characters to allow for SI units like mV or uA. Unfortunately, not all SI units fit in two characters, and not all are lower case followed by upper case. This patch adds hardcoded detection for frequency and 1024-based size units (Hz/KHz/MHz/GHz/THz and KiB/MiB/GiB/TiB), since allowing any three character combinations might be too lenient. The list can later be expanded as needed. Signed-off-by:
Julius Werner <jwerner@chromium.org> Acked-by:
-
Joe Perches authored
Peter Hurley wrote: The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. So make checkpatch emit a --strict test for that condition. Update the unnecessary parentheses test for dereferencing objects at the same time and create a $fix mechanism too. Signed-off-by:
-
Joe Perches authored
When files are being added/moved/deleted and a patch contains an update to the MAINTAINERS file, assume it's to update the MAINTAINERS file correctly and do not emit the "does MAINTAINERS need updating?" message. Reported by many people. Signed-off-by:
-
Joe Perches authored
Shift has a higher precedence that mask so warn when a mask then shift operation is done without parentheses around the mask. This test works well for a right shift, but the left shift is pretty commonly done correctly so only warn on the right shift. Signed-off-by:
-
Joe Perches authored
Commit 66b47b4a ("checkpatch: look for common misspellings") made it difficult to use checkpatch via a symlink. Fix that and make a missing spelling.txt file non-fatal. Emit a warning when the spelling.txt file can not be opened. Reference: http://xkcd.com/1172/Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Kees Cook <keescook@chromium.org> Acked-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Fabio Estevam authored
Add an 'and' to the sentence so that it looks better: WARNING: debugfs_remove(NULL) is safe and this check is probably not required Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
sizeof(foo) is not a cast, allow a space after it. Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Joe Perches authored
Using weak declarations can have unintended link defects. The __weak on the declaration causes non-weak definitions to become weak. Emit an error on its use. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Joe Perches authored
Using code like: int foo , bar; is not preferred to: int foo, bar; so emit an error on this style. Signed-off-by: -
Rasmus Villemoes authored
Return the mathematically correct answer when an argument is 0. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Rasmus Villemoes authored
Ensure that lcm(a,b) returns the mathematically correct result, provided it fits in an unsigned long. The current version returns garbage if a*b overflows, even if the final result would fit. Signed-off-by:
-
Joe Perches authored
Mark these as subscriber-only mailing lists. Signed-off-by:
-
Alex Elder authored
Pranith Kumar posted a patch in which removed the "volatile" qualifier for the "logbuf_cpu" variable in vprintk_emit(). https://lkml.org/lkml/2014/11/13/894 In his patch, he used ACCESS_ONCE() for all references to that symbol to provide whatever protection was intended. There was some discussion that followed, and in the end Steven Rostedt concluded that not only was "volatile" not needed, neither was it required to use ACCESS_ONCE(). I offered an elaborate description that concluded Steven was right, and Pranith asked me to submit an alternative patch. And this is it. The basic reason "volatile" is not needed is that "logbuf_cpu" has static storage duration, and vprintk_emit() is an exported interface. This means that the value of logbuf_cpu must be read from memory the first time it is used in a particular call of vprintk_emit(). The variable's value is read only once in that function, when it's read it'll be the copy from memory (or cache). In addition, the value of "logbuf_cpu" is only ever written under protection of a spinlock. So the value that is read is the "real" value (and not an out-of-date cached one). If its value is not UINT_MAX, it is the current CPU's processor id, and it will have been last written by the running CPU. Signed-off-by:Alex Elder <elder@linaro.org> Reported-by:
Pranith Kumar <bobby.prani@gmail.com> Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Reviewed-by:
-
Joe Perches authored
Use #defines instead of magic values. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Joe Perches authored
Use the more common pr_warn. Coalesce formats, realign arguments. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
