- 25 Apr, 2022 14 commits
-
-
Pavel Begunkov authored
Inline io_queue_sqe() as there is only one caller left, and rename __io_queue_sqe(). Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d5742683b7a7caceb1c054e91e5b9135b0f3b858.1650056133.git.asml.silence@gmail.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We try to aggresively inline the submission path, so it's a good idea to not pollute it with colder code. One of them is linked timeout preparation + queue, which can be extracted into a function. Signed-off-by:
-
Pavel Begunkov authored
Inline io_free_req() into its only user and remove an underscore prefix from __io_free_req(). Signed-off-by:
-
Pavel Begunkov authored
We have several spots where a call to io_fill_cqe_req() is immediately followed by io_put_req_deferred(). Replace them with __io_req_complete_post() and get rid of io_put_req_deferred() and io_fill_cqe_req(). > size ./fs/io_uring.o text data bss dec hex filename 86942 13734 8 100684 1894c ./fs/io_uring.o > size ./fs/io_uring.o text data bss dec hex filename 86438 13654 8 100100 18704 ./fs/io_uring.o Signed-off-by:
-
Pavel Begunkov authored
Get rid of some useless local variables Signed-off-by:
-
Pavel Begunkov authored
When we meet PF_EXITING in io_poll_check_events(), don't overcomplicate the code with io_poll_mark_cancelled() but just return -ECANCELED and the callers will deal with the rest. Signed-off-by:
-
Pavel Begunkov authored
io_get_cqe() is expensive because of a bunch of loads, masking, etc. However, most of the time we should have enough of entries in the CQ, so we can cache two pointers representing a range of contiguous CQE memory we can use. When the range is exhausted we'll go through a slower path to set up a new range. When there are no CQEs avaliable, pointers will naturally point to the same address. Signed-off-by:
-
Pavel Begunkov authored
Considering all inlining io_submit_sqe() is huge and usually ends up calling some other functions. We decrement @left in io_submit_sqes() just before calling io_submit_sqe() and use it later after the call. Considering how huge io_submit_sqe() is, there is not much hope @left will be treated gracefully by compilers. Decrement it after the call, not only it's easier on register spilling and probably saves stack write/read, but also at least for x64 uses CPU flags set by the dec instead of doing (read/write and tests). Signed-off-by:
-
Pavel Begunkov authored
Instead of keeping @submitted in io_submit_sqes(), which for each iteration requires comparison with the initial number of SQEs, store the number of SQEs left to submit. We'll need nr only for when we're done with SQE handling. note: if we can't allocate a req for the first SQE we always has been returning -EAGAIN to the userspace, save this behaviour by looking into the cache in a slow path. Signed-off-by:
-
Pavel Begunkov authored
Don't hand code wq_stack_add_head() to ->free_list, which serves for recycling io_kiocb, add a helper doing it for us. Signed-off-by:
-
Pavel Begunkov authored
Add io_req_cache_empty(), which checks if there are requests in the inline req cache or not. It'll be needed in the future, but also nicely cleans up a few spots poking into ->free_list directly. Signed-off-by:
-
Pavel Begunkov authored
io_flush_cached_reqs() isn't descriptive and has only one caller, inline it into __io_alloc_req_refill(). Signed-off-by:
-
Pavel Begunkov authored
All good users should not set IOSQE_IO_*LINK flags for the last request of a link. io_uring flushes collected links at the end of submission, but it's not the optimal way and so we don't care too much about it. Replace io_queue_sqe() call with io_queue_sqe_fallback() as the former one is inlined and will generate a bunch of extra code. This will also help compilers with the submission path inlining. > size ./fs/io_uring.o text data bss dec hex filename 87265 13734 8 101007 18a8f ./fs/io_uring.o > size ./fs/io_uring.o text data bss dec hex filename 87073 13734 8 100815 189cf ./fs/io_uring.o Signed-off-by:
-
Pavel Begunkov authored
We can do CQE filling a bit more efficiently when req->cqe is fully filled by memcpy()'ing it to the userspace instead of doing it field by field. It's easier on register spilling, removes a couple of extra loads/stores and write combines two u32 memory writes. Signed-off-by:
-
- 24 Apr, 2022 26 commits
-
-
Pavel Begunkov authored
We already have req->{result,user_data,cflags}, which mimic struct io_uring_cqe and are intended to store CQE data. Combine them into a struct io_uring_cqe field. Signed-off-by: -
Pavel Begunkov authored
Rename io_sqe_file_register(), so the name better reflects what the function is doing. Signed-off-by:
-
Pavel Begunkov authored
Merge io_sqe_file_register() and io_sqe_file_register(). The only real difference left between them is from where we get an skb. Signed-off-by:
-
Pavel Begunkov authored
There is an old API nuisance where io_uring's SCM accounting functions traverse fixed file tables and so requires them to be set in advance, which leads to some implicit rules of how io_sqe_file_register() should be used. __io_sqe_files_scm() now works with only one file at a time, pass a file directly and get rid of all fixed table dereferencing inside. Clean io_sqe_file_register() callers. Signed-off-by:
-
Pavel Begunkov authored
__io_sqe_files_scm() is now called only from one place passing a single file, so nr argument can be killed and __io_sqe_files_scm() simplified. Signed-off-by:
-
Pavel Begunkov authored
Channel all SCM accounting through io_sqe_file_register(), so we do it uniformely for updates and initial registration and can kill duplicated code. Registration might be slightly slower in some case, but first we skip most of SCM accounting now so it's not a problem. Moreover, it's nicer for an empty set registration as we don't even try to allocate skb for them anymore. Signed-off-by:
-
Pavel Begunkov authored
io_uring deals with file reference loops by registering all fixed files in the SCM/GC infrastrucure. However, only a small subset of all file types can keep long-term references to other files and those that don't are not interesting for the garbage collector as they can't be in a reference loop. They neither can be directly recycled by GC nor affect loop searching. Let's skip io_uring SCM accounting for loop-less files, i.e. all but af_unix sockets, quite imroving fixed file updates performance and greatly helpnig with memory footprint. Signed-off-by:
-
Jens Axboe authored
We don't need to call this for every loop. This is particularly troublesome if we are task_work intensive, and get woken more often than we desire due to that. Just do it at the end, that's always safe as we initialize the waitqueue list head anyway. This can save a considerable amount of hammering on the waitqueue lock, which is also hot from the request completion side. Signed-off-by: -
Pavel Begunkov authored
A small refactoring for io_req_add_compl_list() deduplicating some code. Signed-off-by:
-
Pavel Begunkov authored
Some tooling keep complaining about self assignment in io_for_each_link(), the code is correct but still let's workaround it. Signed-off-by:
-
Pavel Begunkov authored
In most cases io_put_task() is called from the submitter task and go through a higly optimised fast path, which has to be inlined. The other branch though is bulkier and we don't care about it as much because it implies atomics and other heavy calls. Extract it into a helper, which is expected not to be inlined. [before] size ./fs/io_uring.o text data bss dec hex filename 89328 13646 8 102982 19246 ./fs/io_uring.o [after] size ./fs/io_uring.o text data bss dec hex filename 89096 13646 8 102750 1915e ./fs/io_uring.o Signed-off-by:
-
Pavel Begunkov authored
Refactor io_ring_submit_[un]lock(), make it accept issue_flags and remove manual IO_URING_F_UNLOCKED checks. It also allows us to place lockdep annotations inside instead of sprinkling them in a bunch of places. There is only one user that doesn't fit now, so hand code locking in __io_rsrc_put_work(). Signed-off-by:
-
Pavel Begunkov authored
Both submittion and iopolling requires holding uring_lock. IOPOLL can users do them together in a single syscall, however it would still do 2 pairs of lock/unlock. Optimise this case combining locking into one lock/unlock pair, which especially nice for low QD. Signed-off-by:
-
Pavel Begunkov authored
Syscall should only iopoll for events when it's a IOPOLL ring and is not SQPOLL. Instead of check both flags every time we can save it in ring flags so it's easier to use. We don't care much about an extra if there, however it will be inconvenient to copy-paste this chunk with checks in future patches. Signed-off-by:
-
Pavel Begunkov authored
IOPOLL doesn't use additional arguments like sigsets, but it still needs some basic verification, which is currently done by io_get_ext_arg(). This patch adds a separate function for the IOPOLL path, which is a bit simpler and doesn't do extra. This prepares us for further patches, which would have hurt inlining in the hot path otherwise. Signed-off-by:
-
Pavel Begunkov authored
Move fast check out of io_queue_next(), it makes req->flags checks in __io_submit_flush_completions() a bit clearer and grants us better comtrol, e.g. can remove now not justified unlikely() in __io_submit_flush_completions(). Also, we don't care about having this check in io_free_req() as the function is a slow path and io_req_find_next() handles it correctly. Signed-off-by:
-
Pavel Begunkov authored
There is a new (req->flags & REQ_F_POLLED) check in __io_submit_flush_completions() for poll recycling, however io_free_batch_list() is a much better place for it. First, we prefer it after putting the last req ref just to avoid potential problems in the future. Also, it'll enable the recycling for IOPOLL and also will place it closer to all other req->flags bits clean up requests. Signed-off-by:
-
Pavel Begunkov authored
We do several req->flags checks in the fast path of io_free_batch_list(). One explicit check of REQ_F_REFCOUNT, and two other hidden in io_queue_next() and io_dismantle_req(). Moreover, there is a io_req_put_rsrc_locked() call in between, so there is no hope req->flags will be preserved in registers. All those flags if not a slow path than definitely a slower path, so put them all under a single flags mask check and save several mem reloads and ifs. Signed-off-by:
-
Pavel Begunkov authored
Move the fast path from io_req_find_next() into callers. It prepares us for further changes. Signed-off-by:
-
Pavel Begunkov authored
Now io_commit_cqring() is simple and it tolerates well being called without a new CQE filled, so kill a bunch of not needed anymore guards. Signed-off-by:
-
Pavel Begunkov authored
There should be no completions stashed when we first get into tctx_task_work(), so move completion flushing checks a bit later after we had a chance to execute some task works. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: - Fix a corner case when calculating sched runqueue variables That fix also removes a check for a zero divisor in the code, without mentioning it. Vincent clarified that it's ok after I whined about it: https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/ * tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/pelt: Fix attach_entity_load_avg() corner case
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Partly revert a change to our timer_interrupt() that caused lockups with high res timers disabled. - Fix a bug in KVM TCE handling that could corrupt kernel memory. - Two commits fixing Power9/Power10 perf alternative event selection. Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin. * tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix 32bit compile powerpc/perf: Fix power10 event alternatives powerpc/perf: Fix power9 event alternatives KVM: PPC: Fix TCE handling for VFIO powerpc/time: Always set decrementer in timer_interrupt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Add Sapphire Rapids CPU support - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use) * tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: - Read the reported error count from the proper register on synopsys_edac * tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/synopsys: Read the error count from the correct register
-
