- 12 Apr, 2016 40 commits
-
-
J. Bruce Fields authored
commit 4aed9c46 upstream. A number of spots in the xdr decoding follow a pattern like n = be32_to_cpup(p++); READ_BUF(n + 4); where n is a u32. The only bounds checking is done in READ_BUF itself, but since it's checking (n + 4), it won't catch cases where n is very large, (u32)(-4) or higher. I'm not sure exactly what the consequences are, but we've seen crashes soon after. Instead, just break these up into two READ_BUF()s. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jenny Derzhavetz authored
commit 6d1fba0c upstream. When we receive an event that triggers connection termination, we have a a couple of things we may want to do: 1. In case we are already terminating, bailout early 2. In case we are connected but not bound, disconnect and schedule a connection cleanup silently (don't reinstate) 3. In case we are connected and bound, disconnect and reinstate the connection This rework fixes a bug that was detected against a mis-behaved initiator which rejected our rdma_cm accept, in this stage the isert_conn is no bound and reinstate caused a bogus dereference. What's great about this is that we don't need the post_recv_buf_count anymore, so get rid of it. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Jenny Derzhavetz authored
commit f81bf458 upstream. No need to restrict this check to specific events. Signed-off-by:
-
Jenny Derzhavetz authored
commit aea92980 upstream. We need an indication that isert_conn->iscsi_conn binding has happened so we'll know not to invoke a connection reinstatement on an unbound connection which will lead to a bogus isert_conn->conn dereferece. Signed-off-by:
-
Jenny Derzhavetz authored
commit b89a7c25 upstream. Once connection request is accepted, one rx descriptor is posted to receive login request. This descriptor has rx type, but is outside the main pool of rx descriptors, and thus was mistreated as tx type. Signed-off-by:
-
Himanshu Madhani authored
commit 5e47f198 upstream. This patch fixes an active I/O shutdown bug for fabric drivers using target_wait_for_sess_cmds(), where se_cmd descriptor shutdown would result in hung tasks waiting indefinitely for se_cmd->cmd_wait_comp to complete(). To address this bug, drop the incorrect list_del_init() usage in target_wait_for_sess_cmds() and always complete() during se_cmd target_release_cmd_kref() put, in order to let caller invoke the final fabric release callback into se_cmd->se_tfo->release_cmd() code. Reported-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Tested-by:
-
Eric Anholt authored
commit 773b3966 upstream. Our dividers weren't being set successfully because CM_PASSWORD wasn't included in the register write. It looks easier to just compute the divider to write ourselves than to update clk-divider for the ability to OR in some arbitrary bits on write. Fixes about half of the video modes on my HDMI monitor (everything except 720x400). Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Alexander Kochetkov authored
commit e8b63288 upstream. hclk_cpubus needs to keep running because it is needed for devices like the rom, i2s0 or spdif to be accessible via cpu. Without that all accesses to devices (readl/writel) return wrong data. So add it to the list of critical clocks. Fixes: 78eaf609 ("clk: rockchip: disable unused clocks") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Heiko Stuebner authored
commit fd0c0740 upstream. Fix a typo making the sclk_hdmi_cec access a wrong register to handle its gate. Fixes: 3536c97a ("clk: rockchip: add rk3368 clock controller") Signed-off-by:
zhangqing <zhangqing@rock-chips.com> Signed-off-by:
-
Heiko Stuebner authored
commit 0f28d984 upstream. The vdpu and vepu clocks can also be parented to the npll and current parent list also is wrong as it would use the npll as "usbphy" source, so adapt the parent to the correct one. Fixes: 3536c97a ("clk: rockchip: add rk3368 clock controller") Signed-off-by:
-
Heiko Stuebner authored
commit c6d5fe2c upstream. Similar to commit 9880d427 ("clk: rockchip: fix rk3288 cpuclk core dividers") it seems the cpuclk dividers are one to high on the rk3368 as well. And again similar to the previous fix, we opt to make the divider list contain the values to be written to use the same paradigm for them on all supported socs. Fixes: 3536c97a ("clk: rockchip: add rk3368 clock controller") Reported-by:
-
Heiko Stuebner authored
commit 535ebd42 upstream. Both clusters have their mux bit in bit 7 of their respective register. For whatever reason the big cluster currently lists bit 15 which is definitly wrong. Fixes: 3536c97a ("clk: rockchip: add rk3368 clock controller") Reported-by:
-
Brent Taylor authored
commit 93c77d29 upstream. Using an at91sam9g20ek development board with DTS configuration may trigger a kernel panic because of a NULL pointer dereference exception, while configuring DMA. Let's fix this by adding a check for pdata before dereferencing it. Signed-off-by:
Brent Taylor <motobud@gmail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit 99513624 upstream. Normally the timeout clock frequency is read from the capabilities register. It is also possible to set the value prior to calling sdhci_add_host() in which case that value will override the capabilities register value. However that was being done after calculating max_busy_timeout so that max_busy_timeout was being calculated using the wrong value of timeout_clk. Fix that by moving the override before max_busy_timeout is calculated. The result is that the max_busy_timeout and max_discard increase for BSW devices so that, for example, the time for mkfs.ext4 on a 64GB eMMC drops from about 1 minute 40 seconds to about 20 seconds. Note, in the future, the capabilities setting will be tidied up and this override won't be used anymore. However this fix is needed for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Lucas Stach authored
commit 3491b690 upstream. The new code to do the clock rate setting externally to the SDMMC module has a shortcut to not propagate changes with a 0 rate to the CAR by simply bailing out. This breaks proper cutting of the card clock. Fix it by directly calling the correct sdhci function. Fixes: a8e326a9 "mmc: tegra: implement module external clock change" Signed-off-by:
Lucas Stach <dev@lynxeye.de> Acked-by:
-
Jon Hunter authored
commit 7bf037d6 upstream. SD card support for Tegra114 started failing after commit a8e326a9 ("mmc: tegra: implement module external clock change") was merged. This commit was part of a series to enable UHS-I modes for Tegra. To workaround this problem for now, disable UHS-I modes for Tegra114 by separating the soc data structures for Tegra114 and Tegra124 so that UHS-I is still enabled for Tegra124 but not Tegra114. Fixes: a8e326a9 ("mmc: tegra: implement module external clock change") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Russell King authored
commit 0ca33b4a upstream. Commit 1140011e ("mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes") broke any chance of the SDR50 or DDR50 modes being used. The commit claims that SDR50 and DDR50 require clock adjustments in the SDIO3 Configuration register, which is located via the "conf-sdio3" resource. However, when this resource is given, we fail to read the host capabilities 1 register, resulting in host->caps1 being zero. Hence, both SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50 bits remain zero, disabling the SDR50 and DDR50 modes. The underlying idea in this function appears to be to read the device capabilities, modify them, and set SDHCI_QUIRK_MISSING_CAPS to cause our modified capabilities to be used. Implement exactly that. Fixes: 1140011e ("mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Russell King authored
commit 7f05538a upstream. The calculation for the timeout based on the number of card clocks is incorrect. The calculation assumed: timeout in microseconds = clock cycles / clock in Hz which is clearly a several orders of magnitude wrong. Fix this by multiplying the clock cycles by 1000000 prior to dividing by the Hz based clock. Also, as per part 1, ensure that the division rounds up. As this needs 64-bit math via do_div(), avoid it if the clock cycles is zero. Signed-off-by:
-
Russell King authored
commit fafcfda9 upstream. The data timeout gives the minimum amount of time that should be waited before timing out if no data is received from the card. Simply dividing the nanosecond part by 1000 does not give this required guarantee, since such a division rounds down. Use DIV_ROUND_UP() to give the desired timeout. Signed-off-by:
-
Russell King authored
commit 054cedff upstream. If we terminate a command early, we fail to properly clean up the DMA mappings for the data part of the request. Put this clean up to the tasklet, which is the common path for finishing a request so we always clean up after ourselves. Signed-off-by:
-
Russell King authored
commit edd63fcc upstream. Unnecessarily mapping and unmapping the align buffer for SD cards is expensive: performance measurements on iMX6 show that this gives a hit of 10% on hdparm buffered disk reads. MMC/SD card IO comes from the mm/vfs which gives us page based IO, so for this case, the align buffer is not going to be used. However, we still map and unmap this buffer. Eliminate this by switching the align buffer to be a DMA coherent buffer, which needs no DMA maintenance to access the buffer. Signed-off-by:
-
Russell King authored
commit 771a3dc2 upstream. sdhci_post_req() exists to unmap a previously mapped but already finished request, while the next request is in progress. However, the state of the SDHCI_REQ_USE_DMA flag depends on the last submitted request. This means we can end up clearing the flag due to a quirk, which then means that sdhci_post_req() fails to unmap the DMA buffer, potentially leading to data corruption. We can safely ignore the SDHCI_REQ_USE_DMA here, as testing data->host_cookie is entirely sufficient. Signed-off-by:
-
Russell King authored
commit 71fcbda0 upstream. When we get a response CRC error on a command, it means that the response we received back from the card was not correct. It does not mean that the card did not receive the command correctly. If the command is one which initiates a data transfer, the card can enter the data transfer state, and start sending data. Moreover, if the request contained a data phase, we do not clean this up, and this results in the driver triggering DMA API debug warnings, and also creates a race condition in the driver, between running the finish_tasklet and the data transfer interrupts, which can trigger a "Got data interrupt" state dump. Fix this by handing a response CRC error slightly differently: record the failure of the data initiating command, but allow the remainder of the request to be processed normally. This is safe as core MMC checks the status of all commands and data transfer phases of the request. If the card does not initiate a data transfer, then we should time out according to the data transfer parameters. Signed-off-by:
-
Russell King authored
commit ec014cba upstream. Avoid multiple tests while handling a command error; simplify the code. Signed-off-by:
-
Russell King authored
commit 96776200 upstream. When a command is started, logically it has no error. Initialise the command's error member to zero whenever we start a command. Signed-off-by:
-
Magnus Damm authored
commit bcdc9f26 upstream. This patch fixes the MMC SPI driver from doing polling card detect when a CD GPIO that supports interrupts is specified using the gpios DT property. Without this patch the DT node below results in the following output: spi_gpio: spi-gpio { /* SD2 @ CN12 */ compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; status = "okay"; spi@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; spi-max-frequency = <25000000>; gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */ }; }; # dmesg | grep mmc mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new SDHC card on SPI mmcblk0: mmc0:0000 SU04G 3.69 GiB mmcblk0: p1 With this patch applied the "cd polling" portion above disappears. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
-
Shawn Lin authored
commit 83c742c3 upstream. If mmc_blk_ioctl returns -EINVAL, blkdev_ioctl continues to work without returning err to user-space. But now we check CAP_SYS_RAWIO firstly, so we return -EPERM to blkdev_ioctl, which make blkdev_ioctl return -EPERM to user-space directly. So this will break all the ioctl with BLKROSET. Now we find Android-adb suffer it for the following log: remount of /system failed; couldn't make block device writable: Operation not permitted openat(AT_FDCWD, "/dev/block/platform/ff420000.dwmmc/by-name/system", O_RDONLY) = 3 ioctl(3, BLKROSET, 0) = -1 EPERM (Operation not permitted) Fixes: a5f5774c ("mmc: block: Add new ioctl to send multi commands") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
John Dahlstrom authored
commit 4db9675d upstream. Some Lenovo ideapad models lack a physical rfkill switch. On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK, ideapad-laptop would wrongly report all radios as blocked by hardware which caused wireless network connections to fail. Add these models without an rfkill switch to the no_hw_rfkill list. Signed-off-by:
John Dahlstrom <jodarom@sdf.org> Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dabc: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Guenter Roeck authored
commit 968ce1b1 upstream. The old web page for the hwmon subsystem is no longer operational, and the mailing list has become unreliable. Move both to kernel.org. Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jiri Kosina authored
commit c8b08ca5 upstream. mkspec is copying built kernel to temporrary location /boot/vmlinuz-$KERNELRELEASE-rpm and runs installkernel on it. This however directly leads to grub2 menuentry for this suffixed binary being generated as well during the run of installkernel script. Later in the process the temporary -rpm suffixed files are removed, and therefore we end up with spurious (and non-functional) grub2 menu entries for each installed kernel RPM. Fix that by using a different temporary name (prefixed by '.'), so that the binary is not recognized as an actual kernel binary and no menuentry is created for it. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Fixes: 3c9c7a14 ("rpm-pkg: add %post section to create initramfs and grub hooks") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Jan Beulich authored
commit 42f9d3c6 upstream. Documentation/Changes still lists this as the minimal required version, so it ought to remain usable for the time being. Fixes: d2036f30 ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target") Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
commit 1b669e71 upstream. & is no longer allowed in column 0, since Coccinelle 1.0.4. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Tested-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Peter Zijlstra authored
commit f75d4864 upstream. __clear_bit_unlock() is a special little snowflake. While it carries the non-atomic '__' prefix, it is specifically documented to pair with test_and_set_bit() and therefore should be 'somewhat' atomic. Therefore the generic implementation of __clear_bit_unlock() cannot use the fully non-atomic __clear_bit() as a default. If an arch is able to do better; is must provide an implementation of __clear_bit_unlock() itself. Specifically, this came up as a result of hackbench livelock'ing in slab_lock() on ARC with SMP + SLUB + !LLSC. The issue was incorrect pairing of atomic ops. slab_lock() -> bit_spin_lock() -> test_and_set_bit() slab_unlock() -> __bit_spin_unlock() -> __clear_bit() The non serializing __clear_bit() was getting "lost" 80543b8e: ld_s r2,[r13,0] <--- (A) Finds PG_locked is set 80543b90: or r3,r2,1 <--- (B) other core unlocks right here 80543b94: st_s r3,[r13,0] <--- (C) sets PG_locked (overwrites unlock) Fixes ARC STAR 9000817404 (and probably more). Reported-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160309114054.GJ6356@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 3debb0a9 upstream. The trace_printk() code will allocate extra buffers if the compile detects that a trace_printk() is used. To do this, the format of the trace_printk() is saved to the __trace_printk_fmt section, and if that section is bigger than zero, the buffers are allocated (along with a message that this has happened). If trace_printk() uses a format that is not a constant, and thus something not guaranteed to be around when the print happens, the compiler optimizes the fmt out, as it is not used, and the __trace_printk_fmt section is not filled. This means the kernel will not allocate the special buffers needed for the trace_printk() and the trace_printk() will not write anything to the tracing buffer. Adding a "__used" to the variable in the __trace_printk_fmt section will keep it around, even though it is set to NULL. This will keep the string from being printed in the debugfs/tracing/printk_formats section as it is not needed. Reported-by:
Vlastimil Babka <vbabka@suse.cz> Fixes: 07d777fe "tracing: Add percpu buffers for trace_printk()" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit a29054d9 upstream. If tracing contains data and the trace_pipe file is read with sendfile(), then it can trigger a NULL pointer dereference and various BUG_ON within the VM code. There's a patch to fix this in the splice_to_pipe() code, but it's also a good idea to not let that happen from trace_pipe either. Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.inReported-by:
Rabin Vincent <rabin.vincent@gmail.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit cb86e053 upstream. Joel Fernandes reported that the function tracing of preempt disabled sections was not being reported when running either the preemptirqsoff or preemptoff tracers. This was due to the fact that the function tracer callback for those tracers checked if irqs were disabled before tracing. But this fails when we want to trace preempt off locations as well. Joel explained that he wanted to see funcitons where interrupts are enabled but preemption was disabled. The expected output he wanted: <...>-2265 1d.h1 3419us : preempt_count_sub <-irq_exit <...>-2265 1d..1 3419us : __do_softirq <-irq_exit <...>-2265 1d..1 3419us : msecs_to_jiffies <-__do_softirq <...>-2265 1d..1 3420us : irqtime_account_irq <-__do_softirq <...>-2265 1d..1 3420us : __local_bh_disable_ip <-__do_softirq <...>-2265 1..s1 3421us : run_timer_softirq <-__do_softirq <...>-2265 1..s1 3421us : hrtimer_run_pending <-run_timer_softirq <...>-2265 1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq <...>-2265 1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq <...>-2265 1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq <...>-2265 1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq <...>-2265 1..s1 3423us : rcu_bh_qs <-__do_softirq <...>-2265 1d.s1 3423us : irqtime_account_irq <-__do_softirq <...>-2265 1d.s1 3423us : __local_bh_enable <-__do_softirq There's a comment saying that the irq disabled check is because there's a possible race that tracing_cpu may be set when the function is executed. But I don't remember that race. For now, I added a check for preemption being enabled too to not record the function, as there would be no race if that was the case. I need to re-investigate this, as I'm now thinking that the tracing_cpu will always be correct. But no harm in keeping the check for now, except for the slight performance hit. Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com Fixes: 5e6d2b9c "tracing: Use one prologue for the preempt irqs off tracer function tracers" Reported-by:
Joel Fernandes <agnel.joel@gmail.com> Signed-off-by:
-
Eric Huang authored
commit 60123300 upstream. Set the UVD and VCE DPM flags otherwise UVD and VCE DPM won't get enabled. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by:
-
Ken Wang authored
commit 16a8a49b upstream. Signed-off-by:
Ken Wang <Qingqing.Wang@amd.com> Reviewed-by:
-
Alex Deucher authored
commit bedf2a65 upstream. Some PX laptops don't provide an ACPI method to control dGPU power. On those systems, the driver is responsible for handling the dGPU power state. Disable runtime PM on them until support for this is implemented. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Dave Airlie authored
commit b36f7d26 upstream. The function this used changed in 092c96a8 drm/radeon: fix dp link rate selection (v2) However for MST we should just always train to the max link/rate. Though we probably need to limit this for future hw, in theory radeon won't support it. This fixes my 30" monitor with MST enabled. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
