- 21 Feb, 2022 1 commit
-
-
Tao Liu authored
We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header. Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host. Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL. This patch also includes ipv6_gso_segment(), considering SIT, etc. Fixes: cb32f511 ("ipip: add GSO/TSO support") Signed-off-by:
Tao Liu <thomas.liu@ucloud.cn> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Feb, 2022 8 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series contains bug fixes for FEC reporting, ethtool self test, multicast setup, devlink health reporting and live patching, and a firmware response timeout. ==================== Signed-off-by: -
Kalesh AP authored
To install a livepatch, first flash the package to NVM, and then activate the patch through the "HWRM_FW_LIVEPATCH" fw command. To uninstall a patch from NVM, flash the removal package and then activate it through the "HWRM_FW_LIVEPATCH" fw command. The "HWRM_FW_LIVEPATCH" fw command has to consider following scenarios: 1. no patch in NVM and no patch active. Do nothing. 2. patch in NVM, but not active. Activate the patch currently in NVM. 3. patch is not in NVM, but active. Deactivate the patch. 4. patch in NVM and the patch active. Do nothing. Fix the code to handle these scenarios during devlink "fw_activate". To install and activate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset To remove and deactivate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch_rem.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset Fixes: 3c415339 ("bnxt_en: implement firmware live patching") Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by:
Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by:
-
Kalesh AP authored
During ifdown, we call bnxt_inv_fw_health_reg() which will clear both the status_reliable and resets_reliable flags if these registers are mapped. This is correct because a FW reset during ifdown will clear these register mappings. If we detect that FW has gone through reset during the next ifup, we will remap these registers. But during normal ifup with no FW reset, we need to restore the resets_reliable flag otherwise we will not show the reset counter during devlink diagnose. Fixes: 8cc95ceb ("bnxt_en: improve fw diagnose devlink health messages") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
-
Pavan Chebbi authored
We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by:
-
Michael Chan authored
In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89 ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
-
Michael Chan authored
For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by:
Ben Li <ben.li@broadcom.com> Signed-off-by:
-
Somnath Kotur authored
ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b277589 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by:
-
- 19 Feb, 2022 15 commits
-
-
Vladimir Oltean authored
If the DSA master doesn't support IFF_UNICAST_FLT, then the following call path is possible: dsa_slave_switchdev_event_work -> dsa_port_host_fdb_add -> dev_uc_add -> __dev_set_rx_mode -> __dev_set_promiscuity Since the blamed commit, dsa_slave_switchdev_event_work() no longer holds rtnl_lock(), which triggers the ASSERT_RTNL() from __dev_set_promiscuity(). Taking rtnl_lock() around dev_uc_add() is impossible, because all the code paths that call dsa_flush_workqueue() do so from contexts where the rtnl_mutex is already held - so this would lead to an instant deadlock. dev_uc_add() in itself doesn't require the rtnl_mutex for protection. There is this comment in __dev_set_rx_mode() which assumes so: /* Unicast addresses changes may only happen under the rtnl, * therefore calling __dev_set_promiscuity here is safe. */ but it is from commit 4417da66 ("[NET]: dev: secondary unicast address support") dated June 2007, and in the meantime, commit f1f28aa3 ("netdev: Add addr_list_lock to struct net_device."), dated July 2008, has added &dev->addr_list_lock to protect this instead of the global rtnl_mutex. Nonetheless, __dev_set_promiscuity() does assume rtnl_mutex protection, but it is the uncommon path of what we typically expect dev_uc_add() to do. So since only the uncommon path requires rtnl_lock(), just check ahead of time whether dev_uc_add() would result into a call to __dev_set_promiscuity(), and handle that condition separately. DSA already configures the master interface to be promiscuous if the tagger requires this. We can extend this to also cover the case where the master doesn't handle dev_uc_add() (doesn't support IFF_UNICAST_FLT), and on the premise that we'd end up making it promiscuous during operation anyway, either if a DSA slave has a non-inherited MAC address, or if the bridge notifies local FDB entries for its own MAC address, the address of a station learned on a foreign port, etc. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Reported-by:Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Svenning Sørensen authored
Commit b3612ccd ("net: dsa: microchip: implement multi-bridge support") plugged a packet leak between ports that were members of different bridges. Unfortunately, this broke another use case, namely that of more than two ports that are members of the same bridge. After that commit, when a port is added to a bridge, hardware bridging between other member ports of that bridge will be cleared, preventing packet exchange between them. Fix by ensuring that the Port VLAN Membership bitmap includes any existing ports in the bridge, not just the port being added. Fixes: b3612ccd ("net: dsa: microchip: implement multi-bridge support") Signed-off-by:
Svenning Sørensen <sss@secomea.com> Tested-by:
-
Christophe Leroy authored
All functions defined as static inline in net/checksum.h are meant to be inlined for performance reason. But since commit ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to uninline functions when it wants. Fair enough in the general case, but for tiny performance critical checksum helpers that's counter-productive. The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE, Those helpers being 'static inline' in header files you suddenly find them duplicated many times in the resulting vmlinux. Here is a typical exemple when building powerpc pmac32_defconfig with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times: c04a23cc <csum_sub>: c04a23cc: 7c 84 20 f8 not r4,r4 c04a23d0: 7c 63 20 14 addc r3,r3,r4 c04a23d4: 7c 63 01 94 addze r3,r3 c04a23d8: 4e 80 00 20 blr ... c04a2ce8: 4b ff f6 e5 bl c04a23cc <csum_sub> ... c04a2d2c: 4b ff f6 a1 bl c04a23cc <csum_sub> ... c04a2d54: 4b ff f6 79 bl c04a23cc <csum_sub> ... c04a754c <csum_sub>: c04a754c: 7c 84 20 f8 not r4,r4 c04a7550: 7c 63 20 14 addc r3,r3,r4 c04a7554: 7c 63 01 94 addze r3,r3 c04a7558: 4e 80 00 20 blr ... c04ac930: 4b ff ac 1d bl c04a754c <csum_sub> ... c04ad264: 4b ff a2 e9 bl c04a754c <csum_sub> ... c04e3b08 <csum_sub>: c04e3b08: 7c 84 20 f8 not r4,r4 c04e3b0c: 7c 63 20 14 addc r3,r3,r4 c04e3b10: 7c 63 01 94 addze r3,r3 c04e3b14: 4e 80 00 20 blr ... c04e5788: 4b ff e3 81 bl c04e3b08 <csum_sub> ... c04e65c8: 4b ff d5 41 bl c04e3b08 <csum_sub> ... c0512d34 <csum_sub>: c0512d34: 7c 84 20 f8 not r4,r4 c0512d38: 7c 63 20 14 addc r3,r3,r4 c0512d3c: 7c 63 01 94 addze r3,r3 c0512d40: 4e 80 00 20 blr ... c0512dfc: 4b ff ff 39 bl c0512d34 <csum_sub> ... c05138bc: 4b ff f4 79 bl c0512d34 <csum_sub> ... Restore the expected behaviour by using __always_inline for all functions defined in net/checksum.h vmlinux size is even reduced by 256 bytes with this patch: text data bss dec hex filename 6980022 2515362 194384 9689768 93daa8 vmlinux.before 6979862 2515266 194384 9689512 93d9a8 vmlinux.now Fixes: ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-18 This series contains updates to ice driver only. Wojciech fixes protocol matching for slow-path switchdev so that all packets are correctly redirected. Michal removes accidental unconditional setting of l4 port filtering flag. Jake adds locking to protect VF reset and removal to fix various issues that can be encountered when they race with each other. Tom Rix propagates an error and initializes a struct to resolve reported Clang issues. ==================== Signed-off-by: -
David S. Miller authored
Mat Martineau says: ==================== mptcp: Fix address advertisement races and stabilize tests Patches 1, 2, and 7 modify two self tests to give consistent, accurate results by fixing timing issues and accounting for syncookie behavior. Paches 3-6 fix two races in overlapping address advertisement send and receive. Associated self tests are updated, including addition of two MIBs to enable testing and tracking dropped address events. ==================== Signed-off-by: -
Paolo Abeni authored
Since commit 2843ff6f ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f ("mptcp: remote addresses fullmesh") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
The in kernel MPTCP PM implementation can process a single incoming add address option at any given time. In the mentioned test the server can surpass such limit. Let the setup cope with that allowing a faster add_addr retransmission. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254Reported-and-tested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by:
-
Paolo Abeni authored
The MPTCP in kernel path manager has some constraints on incoming addresses announce processing, so that in edge scenarios it can end-up dropping (ignoring) some of such announces. The above is not very limiting in practice since such scenarios are very uncommon and MPTCP will recover due to ADD_ADDR retransmissions. This patch adds a few MIB counters to account for such drop events to allow easier introspection of the critical scenarios. Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by:
-
Paolo Abeni authored
If an MPTCP endpoint received multiple consecutive incoming ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite the current remote address value after the PM lock is released in mptcp_pm_nl_add_addr_received() and before such address is echoed. Fix the issue caching the remote address value a little earlier and always using the cached value after releasing the PM lock. Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by:
-
Paolo Abeni authored
After commit a88c9e49 ("mptcp: do not block subflows creation on errors"), if a signal address races with a failing subflow creation, the subflow creation failure control path can trigger the selection of the next address to be announced while the current announced is still pending. The above will cause the unintended suppression of the ADD_ADDR announce. Fix the issue skipping the to-be-suppressed announce before it will mark an endpoint as already used. The relevant announce will be triggered again when the current one will complete. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Reviewed-by:
-
Paolo Abeni authored
The mentioned test has to wait for a subflow creation failure. The current code looks for TCP sockets in TW state and sometimes misses the relevant event. Switch to a more stable check, looking for the associated mib counter. Fixes: 46e967d1 ("selftests: mptcp: add tests for subflow creation failure") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257Reported-and-tested-by:
-
Paolo Abeni authored
Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258Reported-and-tested-by:
-
Christophe JAILLET authored
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1. Fixes: 20cce886 ("nfp: flower: enable MAC address sharing for offloadable devs") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220218131535.100258-1-simon.horman@corigine.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Subash Abhinov Kasiviswanathan authored
Switch to the quicinc.com ids. Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Link: https://lore.kernel.org/r/1645174218-32632-1-git-send-email-quic_subashab@quicinc.comSigned-off-by:
-
Jeremy Linton authored
Booting a MACCHIATObin with 5.17, the system OOPs with a null pointer deref when the network is started. This is caused by the pcs->ops structure being null in mcpp2_acpi_start() when it tries to call pcs_config(). Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, assuring they are always set, fixes the problem. The OOPs looks like: [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 [ 18.698561] Mem abort info: [ 18.698564] ESR = 0x96000004 [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.709821] SET = 0, FnV = 0 [ 18.714292] EA = 0, S1PTW = 0 [ 18.718833] FSC = 0x04: level 0 translation fault [ 18.725126] Data abort info: [ 18.729408] ISV = 0, ISS = 0x00000004 [ 18.734655] CM = 0, WnR = 0 [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 18.752235] Internal error: Oops: 96000004 [#1] SMP [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] [ 18.812197] sp : ffff80000b4732c0 [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 [ 18.887183] Call trace: [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] [ 18.898483] __dev_open+0x128/0x1e4 [ 18.901988] __dev_change_flags+0x17c/0x1d0 [ 18.906187] dev_change_flags+0x30/0x70 [ 18.910038] do_setlink+0x278/0xa7c [ 18.913540] __rtnl_newlink+0x44c/0x7d0 [ 18.917391] rtnl_newlink+0x5c/0x8c [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 [ 18.925006] netlink_rcv_skb+0x48/0x10c [ 18.928858] rtnetlink_rcv+0x24/0x30 [ 18.932449] netlink_unicast+0x290/0x2f4 [ 18.936386] netlink_sendmsg+0x1d0/0x41c [ 18.940323] sock_sendmsg+0x60/0x70 [ 18.943825] ____sys_sendmsg+0x248/0x260 [ 18.947762] ___sys_sendmsg+0x74/0xa0 [ 18.951438] __sys_sendmsg+0x64/0xcc [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 [ 18.959140] invoke_syscall+0x50/0x120 [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 [ 18.967629] do_el0_svc+0x30/0x9c [ 18.970958] el0_svc+0x28/0xb0 [ 18.974025] el0t_64_sync_handler+0x10c/0x140 [ 18.978400] el0t_64_sync+0x1a4/0x1a8 [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) [ 18.988196] ---[ end trace 0000000000000000 ]--- Fixes: cff05632 ("net: mvpp2: use .mac_select_pcs() interface") Suggested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220214231852.3331430-1-jeremy.linton@arm.comSigned-off-by:
-
- 18 Feb, 2022 11 commits
-
-
Tom Rix authored
Clang static analysis reports this issues ice_common.c:5008:21: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ldo->phy_type_low |= ((u64)buf << (i * 16)); ~~~~~~~~~~~~~~~~~ ^ When called from ice_cfg_phy_fec() ldo is the uninitialized local variable tlv. So initialize. Fixes: ea78ce4d ("ice: add link lenient and default override support") Signed-off-by:
Tom Rix <trix@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Tom Rix authored
Clang static analysis reports this issue time64.h:69:50: warning: The left operand of '+' is a garbage value set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, ~~~~~~~~~~ ^ In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now' is set by ice_ptp_gettimex64(). This function can fail with -EBUSY, so 'now' can have a gargbage value. So check the return. Fixes: 06c16d89 ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: -
Jacob Keller authored
Commit c503e632 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e632 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e632 ("ice: Stop processing VF messages during teardown") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Michal Swiatkowski authored
Accidentally filter flag for none encapsulated l4 port field is always set. Even if user wants to add encapsulated l4 port field. Remove this unnecessary flag setting. Fixes: 9e300987 ("ice: VXLAN and Geneve TC support") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
-
Wojciech Drewek authored
In switchdev mode, slow-path rules need to match all protocols, in order to correctly redirect unfiltered or missed packets to the uplink. To set this up for the virtual function to uplink flow, the rule that redirects packets to the control VSI must have the tunnel type set to ICE_SW_TUN_AND_NON_TUN. As a result of that new tunnel type being set, ice_get_compat_fv_bitmap will select ICE_PROF_ALL. At that point all profiles would be selected for this rule, resulting in the desired behavior. Without this change slow-path would not work with tunnel protocols. Fixes: 8b032a55 ("ice: low level support for tunnels") Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Tested-by:
-
Xiaoke Wang authored
devm_kmalloc() returns a pointer to allocated memory on success, NULL on failure. While lp->indirect_lock is allocated by devm_kmalloc() without proper check. It is better to check the value of it to prevent potential wrong memory access. Fixes: f14f5c11 ("net: ll_temac: Support indirect_mutex share within TEMAC IP") Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by:
-
Eric Dumazet authored
UDP sendmsg() can be lockless, this is causing all kinds of data races. This patch converts sk->sk_tskey to remove one of these races. BUG: KCSAN: data-race in __ip_append_data / __ip_append_data read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1: __ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0: __ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000054d -> 0x0000054e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 09c2d251 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Oliver Neukum authored
A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
-
Paul Blakey authored
Flow table lookup is skipped if packet either went through ct clear action (which set the IP_CT_UNTRACKED flag on the packet), or while switching zones and there is already a connection associated with the packet. This will result in no SW offload of the connection, and the and connection not being removed from flow table with TCP teardown (fin/rst packet). To fix the above, remove these unneccary checks in flow table lookup. Fixes: 46475bb2 ("net/sched: act_ct: Software offload of established flows") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
suresh kumar authored
When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by:suresh kumar <suresh2514@gmail.com> Signed-off-by:
-
Duoming Zhou authored
When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
- 17 Feb, 2022 5 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2022-02-17 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 8 files changed, 119 insertions(+), 15 deletions(-). The main changes are: 1) Add schedule points in map batch ops, from Eric. 2) Fix bpf_msg_push_data with len 0, from Felix. 3) Fix crash due to incorrect copy_map_value, from Kumar. 4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar. 5) Fix a bpf_timer initialization issue with clang, from Yonghong. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add schedule points in batch ops bpf: Fix crash due to out of bounds access into reg2btf_ids. selftests: bpf: Check bpf_msg_push_data return value bpf: Fix a bpf_timer initialization issue bpf: Emit bpf_timer in vmlinux BTF selftests/bpf: Add test for bpf_timer overwriting crash bpf: Fix crash due to incorrect copy_map_value bpf: Do not try bpf_msg_push_data with len 0 ==================== Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. Current release - regressions: - dsa: lantiq_gswip: fix use after free in gswip_remove() - smc: avoid overwriting the copies of clcsock callback functions Current release - new code bugs: - iwlwifi: - fix use-after-free when no FW is present - mei: fix the pskb_may_pull check in ipv4 - mei: retry mapping the shared area - mvm: don't feed the hardware RFKILL into iwlmei Previous releases - regressions: - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() - tipc: fix wrong publisher node address in link publications - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW assertion - bgmac: make idm and nicpm resource optional again - atl1c: fix tx timeout after link flap Previous releases - always broken: - vsock: remove vsock from connected table when connect is interrupted by a signal - ping: change destination interface checks to match raw sockets - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing semantics (and null-deref) after SO_RESERVE_MEM was added - ipv6: make exclusive flowlabel checks per-netns - bonding: force carrier update when releasing slave - sched: limit TC_ACT_REPEAT loops - bridge: multicast: notify switchdev driver whenever MC processing gets disabled because of max entries reached - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found - iwlwifi: fix locking when "HW not ready" - phy: mediatek: remove PHY mode check on MT7531 - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN - dsa: lan9303: - fix polarity of reset during probe - fix accelerated VLAN handling" * tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) bonding: force carrier update when releasing slave nfp: flower: netdev offload check for ip6gretap ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt ipv4: fix data races in fib_alias_hw_flags_set net: dsa: lan9303: add VLAN IDs to master device net: dsa: lan9303: handle hwaccel VLAN tags vsock: remove vsock from connected table when connect is interrupted by a signal Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname" ping: fix the dif and sdif check in ping_lookup net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 net: sched: limit TC_ACT_REPEAT loops tipc: fix wrong notification node addresses net: dsa: lantiq_gswip: fix use after free in gswip_remove() ipv6: per-netns exclusive flowlabel checks net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled CDC-NCM: avoid overflow in sanity checking mctp: fix use after free net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() bonding: fix data-races around agg_select_timer dpaa2-eth: Initialize mutex used in one step timestamping path ... -
Zhang Changzhong authored
In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c456 ("[PATCH] bonding: support carrier state for master") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. Fixes: aa2e93b8 ("bpf: Add generic support for update and delete batch ops") Fixes: cb4d03ab ("bpf: Add generic support for lookup batch op") Reported-by:
Alexei Starovoitov <ast@kernel.org> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Acked-by:
Brian Vazquez <brianvv@google.com> Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
-
Luis Chamberlain authored
Commit b42bc9a3 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file") fixed a regression, however it failed to add a kmemleak_not_leak(). Fixes: b42bc9a3 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file") Reported-by:
Tong Zhang <ztong0001@gmail.com> Cc: Tong Zhang <ztong0001@gmail.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
