- 11 Aug, 2017 3 commits
-
-
Peter Zijlstra authored
Merge commit: 040cca3a ("Merge branch 'linus' into locking/core, to resolve conflicts") overlooked the fact that do_huge_pmd_numa_page() now does two TLB flushes. Commit: 8b1b436d ("mm, locking: Rework {set,clear,mm}_tlb_flush_pending()") and commit: a9b80250 ("Revert "mm: numa: defer TLB flush for THP migration as long as possible"") Both moved the TLB flush around but slightly different, the end result being that what was one became two. Clean this up. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rik van Riel <riel@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Conflicts: include/linux/mm_types.h mm/huge_memory.c I removed the smp_mb__before_spinlock() like the following commit does: 8b1b436d ("mm, locking: Rework {set,clear,mm}_tlb_flush_pending()") and fixed up the affected commits. Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too earth shattering here, it just seems like lots of little things all over the place. msm has probably the larger amount of changes, but they all seem fine, otherwise, some rockchip, i915, etnaviv and exynos fixes, along with one nouveau regression fix for some older GPUs" * tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/nouveau/disp/nv04: avoid creation of output paths drm: make DRM_STM default n drm/exynos: forbid creating framebuffers from too small GEM buffers drm/etnaviv: Fix off-by-one error in reloc checking drm/i915: fix backlight invert for non-zero minimum brightness drm/i915/shrinker: Wrap need_resched() inside preempt-disable drm/i915/perf: fix flex eu registers programming drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8 drm/i915/gvt: Initialize MMIO Block with HW state drm/rockchip: vop: report error when check resource error drm/rockchip: vop: round_up pitches to word align drm/rockchip: vop: fix NV12 video display error drm/rockchip: vop: fix iommu page fault when resume drm/i915/gvt: clean workload queue if error happened drm/i915/gvt: change resetting to resetting_eng drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM drm/msm/adreno: Prevent unclocked access when retrieving timestamps drm/msm: Remove __user from __u64 data types ...
-
- 10 Aug, 2017 37 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) userfaultfd: replace ENOSPC with ESRCH in case mm has gone during copy/zeropage zram: rework copy of compressor name in comp_algorithm_store() rmap: do not call mmu_notifier_invalidate_page() under ptl mm: fix list corruptions on shmem shrinklist mm/balloon_compaction.c: don't zero ballooned pages MAINTAINERS: copy virtio on balloon_compaction.c mm: fix KSM data corruption mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem mm: make tlb_flush_pending global mm: refactor TLB gathering API Revert "mm: numa: defer TLB flush for THP migration as long as possible" mm: migrate: fix barriers around tlb_flush_pending mm: migrate: prevent racy access to tlb_flush_pending fault-inject: fix wrong should_fail() decision in task context test_kmod: fix small memory leak on filesystem tests test_kmod: fix the lock in register_test_dev_kmod() test_kmod: fix bug which allows negative values on two config options test_kmod: fix spelling mistake: "EMTPY" -> "EMPTY" userfaultfd: hugetlbfs: remove superfluous page unlock in VM_SHARED case mm: ratelimit PFNs busy info message ...
-
Mike Rapoport authored
When the process exit races with outstanding mcopy_atomic, it would be better to return ESRCH error. When such race occurs the process and it's mm are going away and returning "no such process" to the uffd monitor seems better fit than ENOSPC. Link: http://lkml.kernel.org/r/1502111545-32305-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthias Kaehlcke authored
comp_algorithm_store() passes the size of the source buffer to strlcpy() instead of the destination buffer size. Make it explicit that the two buffers have the same size and use strcpy() instead of strlcpy(). The latter can be done safely since the function ensures that the string in the source buffer is terminated. Link: http://lkml.kernel.org/r/20170803163350.45245-1-mka@chromium.orgSigned-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
MMU notifiers can sleep, but in page_mkclean_one() we call mmu_notifier_invalidate_page() under page table lock. Let's instead use mmu_notifier_invalidate_range() outside page_vma_mapped_walk() loop. [jglisse@redhat.com: try_to_unmap_one() do not call mmu_notifier under ptl] Link: http://lkml.kernel.org/r/20170809204333.27485-1-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170804134928.l4klfcnqatni7vsc@black.fi.intel.com Fixes: c7ab0d2f ("mm: convert try_to_unmap_one() to use page_vma_mapped_walk()") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Reported-by:
axie <axie@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Writer, Tim" <Tim.Writer@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Cong Wang authored
We saw many list corruption warnings on shmem shrinklist: WARNING: CPU: 18 PID: 177 at lib/list_debug.c:59 __list_del_entry+0x9e/0xc0 list_del corruption. prev->next should be ffff9ae5694b82d8, but was ffff9ae5699ba960 Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 18 PID: 177 Comm: kswapd1 Not tainted 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_del_entry+0x9e/0xc0 shmem_unused_huge_shrink+0xfa/0x2e0 shmem_unused_huge_scan+0x20/0x30 super_cache_scan+0x193/0x1a0 shrink_slab.part.41+0x1e3/0x3f0 shrink_slab+0x29/0x30 shrink_node+0xf9/0x2f0 kswapd+0x2d8/0x6c0 kthread+0xd7/0xf0 ret_from_fork+0x22/0x30 WARNING: CPU: 23 PID: 639 at lib/list_debug.c:33 __list_add+0x89/0xb0 list_add corruption. prev->next should be next (ffff9ae5699ba960), but was ffff9ae5694b82d8. (prev=ffff9ae5694b82d8). Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 23 PID: 639 Comm: systemd-udevd Tainted: G W 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_add+0x89/0xb0 shmem_setattr+0x204/0x230 notify_change+0x2ef/0x440 do_truncate+0x5d/0x90 path_openat+0x331/0x1190 do_filp_open+0x7e/0xe0 do_sys_open+0x123/0x200 SyS_open+0x1e/0x20 do_syscall_64+0x61/0x170 entry_SYSCALL64_slow_path+0x25/0x25 The problem is that shmem_unused_huge_shrink() moves entries from the global sbinfo->shrinklist to its local lists and then releases the spinlock. However, a parallel shmem_setattr() could access one of these entries directly and add it back to the global shrinklist if it is removed, with the spinlock held. The logic itself looks solid since an entry could be either in a local list or the global list, otherwise it is removed from one of them by list_del_init(). So probably the race condition is that, one CPU is in the middle of INIT_LIST_HEAD() but the other CPU calls list_empty() which returns true too early then the following list_add_tail() sees a corrupted entry. list_empty_careful() is designed to fix this situation. [akpm@linux-foundation.org: add comments] Link: http://lkml.kernel.org/r/20170803054630.18775-1-xiyou.wangcong@gmail.com Fixes: 779750d2 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by:Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Wei Wang authored
Revert commit bb01b64c ("mm/balloon_compaction.c: enqueue zero page to balloon device")' Zeroing ballon pages is rather time consuming, especially when a lot of pages are in flight. E.g. 7GB worth of ballooned memory takes 2.8s with __GFP_ZERO while it takes ~491ms without it. The original commit argued that zeroing will help ksmd to merge these pages on the host but this argument is assuming that the host actually marks balloon pages for ksm which is not universally true. So we pay performance penalty for something that even might not be used in the end which is wrong. The host can zero out pages on its own when there is a need. [mhocko@kernel.org: new changelog text] Link: http://lkml.kernel.org/r/1501761557-9758-1-git-send-email-wei.w.wang@intel.com Fixes: bb01b64c ("mm/balloon_compaction.c: enqueue zero page to balloon device") Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
Michael S. Tsirkin authored
Changes to mm/balloon_compaction.c can easily break virtio, and virtio is the only user of that interface. Add a line to MAINTAINERS so whoever changes that file remembers to copy us. Link: http://lkml.kernel.org/r/1501764010-24456-1-git-send-email-mst@redhat.comSigned-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
-
Minchan Kim authored
Nadav reported KSM can corrupt the user data by the TLB batching race[1]. That means data user written can be lost. Quote from Nadav Amit: "For this race we need 4 CPUs: CPU0: Caches a writable and dirty PTE entry, and uses the stale value for write later. CPU1: Runs madvise_free on the range that includes the PTE. It would clear the dirty-bit. It batches TLB flushes. CPU2: Writes 4 to /proc/PID/clear_refs , clearing the PTEs soft-dirty. We care about the fact that it clears the PTE write-bit, and of course, batches TLB flushes. CPU3: Runs KSM. Our purpose is to pass the following test in write_protect_page(): if (pte_write(*pvmw.pte) || pte_dirty(*pvmw.pte) || (pte_protnone(*pvmw.pte) && pte_savedwrite(*pvmw.pte))) Since it will avoid TLB flush. And we want to do it while the PTE is stale. Later, and before replacing the page, we would be able to change the page. Note that all the operations the CPU1-3 perform canhappen in parallel since they only acquire mmap_sem for read. We start with two identical pages. Everything below regards the same page/PTE. CPU0 CPU1 CPU2 CPU3 ---- ---- ---- ---- Write the same value on page [cache PTE as dirty in TLB] MADV_FREE pte_mkclean() 4 > clear_refs pte_wrprotect() write_protect_page() [ success, no flush ] pages_indentical() [ ok ] Write to page different value [Ok, using stale PTE] replace_page() Later, CPU1, CPU2 and CPU3 would flush the TLB, but that is too late. CPU0 already wrote on the page, but KSM ignored this write, and it got lost" In above scenario, MADV_FREE is fixed by changing TLB batching API including [set|clear]_tlb_flush_pending. Remained thing is soft-dirty part. This patch changes soft-dirty uses TLB batching API instead of flush_tlb_mm and KSM checks pending TLB flush by using mm_tlb_flush_pending so that it will flush TLB to avoid data lost if there are other parallel threads pending TLB flush. [1] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com Link: http://lkml.kernel.org/r/20170802000818.4760-8-namit@vmware.comSigned-off-by:Nadav Amit <namit@vmware.com> Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Minchan Kim authored
Nadav reported parallel MADV_DONTNEED on same range has a stale TLB problem and Mel fixed it[1] and found same problem on MADV_FREE[2]. Quote from Mel Gorman: "The race in question is CPU 0 running madv_free and updating some PTEs while CPU 1 is also running madv_free and looking at the same PTEs. CPU 1 may have writable TLB entries for a page but fail the pte_dirty check (because CPU 0 has updated it already) and potentially fail to flush. Hence, when madv_free on CPU 1 returns, there are still potentially writable TLB entries and the underlying PTE is still present so that a subsequent write does not necessarily propagate the dirty bit to the underlying PTE any more. Reclaim at some unknown time at the future may then see that the PTE is still clean and discard the page even though a write has happened in the meantime. I think this is possible but I could have missed some protection in madv_free that prevents it happening." This patch aims for solving both problems all at once and is ready for other problem with KSM, MADV_FREE and soft-dirty story[3]. TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can catch there are parallel threads going on. In that case, forcefully, flush TLB to prevent for user to access memory via stale TLB entry although it fail to gather page table entry. I confirmed this patch works with [4] test program Nadav gave so this patch supersedes "mm: Always flush VMA ranges affected by zap_page_range v2" in current mmotm. NOTE: This patch modifies arch-specific TLB gathering interface(x86, ia64, s390, sh, um). It seems most of architecture are straightforward but s390 need to be careful because tlb_flush_mmu works only if mm->context.flush_mm is set to non-zero which happens only a pte entry really is cleared by ptep_get_and_clear and friends. However, this problem never changes the pte entries but need to flush to prevent memory access from stale tlb. [1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net [2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de [3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com [4] https://patchwork.kernel.org/patch/9861621/ [minchan@kernel.org: decrease tlb flush pending count in tlb_finish_mmu] Link: http://lkml.kernel.org/r/20170808080821.GA31730@bbox Link: http://lkml.kernel.org/r/20170802000818.4760-7-namit@vmware.comSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
-
Minchan Kim authored
Currently, tlb_flush_pending is used only for CONFIG_[NUMA_BALANCING| COMPACTION] but upcoming patches to solve subtle TLB flush batching problem will use it regardless of compaction/NUMA so this patch doesn't remove the dependency. [akpm@linux-foundation.org: remove more ifdefs from world's ugliest printk statement] Link: http://lkml.kernel.org/r/20170802000818.4760-6-namit@vmware.comSigned-off-by:
-
Minchan Kim authored
This patch is a preparatory patch for solving race problems caused by TLB batch. For that, we will increase/decrease TLB flush pending count of mm_struct whenever tlb_[gather|finish]_mmu is called. Before making it simple, this patch separates architecture specific part and rename it to arch_tlb_[gather|finish]_mmu and generic part just calls it. It shouldn't change any behavior. Link: http://lkml.kernel.org/r/20170802000818.4760-5-namit@vmware.comSigned-off-by:
-
Nadav Amit authored
While deferring TLB flushes is a good practice, the reverted patch caused pending TLB flushes to be checked while the page-table lock is not taken. As a result, in architectures with weak memory model (PPC), Linux may miss a memory-barrier, miss the fact TLB flushes are pending, and cause (in theory) a memory corruption. Since the alternative of using smp_mb__after_unlock_lock() was considered a bit open-coded, and the performance impact is expected to be small, the previous patch is reverted. This reverts b0943d61 ("mm: numa: defer TLB flush for THP migration as long as possible"). Link: http://lkml.kernel.org/r/20170802000818.4760-4-namit@vmware.comSigned-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Nadav Amit authored
Reading tlb_flush_pending while the page-table lock is taken does not require a barrier, since the lock/unlock already acts as a barrier. Removing the barrier in mm_tlb_flush_pending() to address this issue. However, migrate_misplaced_transhuge_page() calls mm_tlb_flush_pending() while the page-table lock is already released, which may present a problem on architectures with weak memory model (PPC). To deal with this case, a new parameter is added to mm_tlb_flush_pending() to indicate if it is read without the page-table lock taken, and calling smp_mb__after_unlock_lock() in this case. Link: http://lkml.kernel.org/r/20170802000818.4760-3-namit@vmware.comSigned-off-by:
-
Nadav Amit authored
Patch series "fixes of TLB batching races", v6. It turns out that Linux TLB batching mechanism suffers from various races. Races that are caused due to batching during reclamation were recently handled by Mel and this patch-set deals with others. The more fundamental issue is that concurrent updates of the page-tables allow for TLB flushes to be batched on one core, while another core changes the page-tables. This other core may assume a PTE change does not require a flush based on the updated PTE value, while it is unaware that TLB flushes are still pending. This behavior affects KSM (which may result in memory corruption) and MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED. Memory corruption in KSM is harder to produce in practice, but was observed by hacking the kernel and adding a delay before flushing and replacing the KSM page. Finally, there is also one memory barrier missing, which may affect architectures with weak memory model. This patch (of 7): Setting and clearing mm->tlb_flush_pending can be performed by multiple threads, since mmap_sem may only be acquired for read in task_numa_work(). If this happens, tlb_flush_pending might be cleared while one of the threads still changes PTEs and batches TLB flushes. This can lead to the same race between migration and change_protection_range() that led to the introduction of tlb_flush_pending. The result of this race was data corruption, which means that this patch also addresses a theoretically possible data corruption. An actual data corruption was not observed, yet the race was was confirmed by adding assertion to check tlb_flush_pending is not set by two threads, adding artificial latency in change_protection_range() and using sysctl to reduce kernel.numa_balancing_scan_delay_ms. Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com Fixes: 20841405 ("mm: fix TLB flush race between migration, and change_protection_range") Signed-off-by:
-
Akinobu Mita authored
Commit 1203c8e6 ("fault-inject: simplify access check for fail-nth") unintentionally broke a conditional statement in should_fail(). Any faults are not injected in the task context by the change when the systematic fault injection is not used. This change restores to the previous correct behaviour. Link: http://lkml.kernel.org/r/1501633700-3488-1-git-send-email-akinobu.mita@gmail.com Fixes: 1203c8e6 ("fault-inject: simplify access check for fail-nth") Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Reported-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Tested-by:
-
Dan Carpenter authored
The break was in the wrong place so file system tests don't work as intended, leaking memory at each test switch. [mcgrof@kernel.org: massaged commit subject, noted memory leak issue without the fix] Link: http://lkml.kernel.org/r/20170802211450.27928-6-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Reported-by:
David Binderman <dcb314@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Dan Carpenter authored
We accidentally just drop the lock twice instead of taking it and then releasing it. This isn't a big issue unless you are adding more than one device to test on, and the kmod.sh doesn't do that yet, however this obviously is the correct thing to do. [mcgrof@kernel.org: massaged subject, explain what happens] Link: http://lkml.kernel.org/r/20170802211450.27928-5-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by:
-
Luis R. Rodriguez authored
Parsing with kstrtol() enables values to be negative, and we failed to check for negative values when parsing with test_dev_config_update_uint_sync() or test_dev_config_update_uint_range(). test_dev_config_update_uint_range() has a minimum check though so an issue is not present there. test_dev_config_update_uint_sync() is only used for the number of threads to use (config_num_threads_store()), and indeed this would fail with an attempt for a large allocation. Although the issue is only present in practice with the first fix both by using kstrtoul() instead of kstrtol(). Link: http://lkml.kernel.org/r/20170802211450.27928-4-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in snprintf text [mcgrof@kernel.org: massaged commit message] Link: http://lkml.kernel.org/r/20170802211450.27928-3-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrea Arcangeli authored
huge_add_to_page_cache->add_to_page_cache implicitly unlocks the page before returning in case of errors. The error returned was -EEXIST by running UFFDIO_COPY on a non-hole offset of a VM_SHARED hugetlbfs mapping. It was an userland bug that triggered it and the kernel must cope with it returning -EEXIST from ioctl(UFFDIO_COPY) as expected. page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) kernel BUG at mm/filemap.c:964! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 22582 Comm: qemu-system-x86 Not tainted 4.11.11-300.fc26.x86_64 #1 RIP: unlock_page+0x4a/0x50 Call Trace: hugetlb_mcopy_atomic_pte+0xc0/0x320 mcopy_atomic+0x96f/0xbe0 userfaultfd_ioctl+0x218/0xe90 do_vfs_ioctl+0xa5/0x600 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa9 Link: http://lkml.kernel.org/r/20170802165145.22628-2-aarcange@redhat.comSigned-off-by:Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by:
-
Jonathan Toppins authored
The RDMA subsystem can generate several thousand of these messages per second eventually leading to a kernel crash. Ratelimit these messages to prevent this crash. Doug said: "I've been carrying a version of this for several kernel versions. I don't remember when they started, but we have one (and only one) class of machines: Dell PE R730xd, that generate these errors. When it happens, without a rate limit, we get rcu timeouts and kernel oopses. With the rate limit, we just get a lot of annoying kernel messages but the machine continues on, recovers, and eventually the memory operations all succeed" And: "> Well... why are all these EBUSY's occurring? It sounds inefficient > (at least) but if it is expected, normal and unavoidable then > perhaps we should just remove that message altogether? I don't have an answer to that question. To be honest, I haven't looked real hard. We never had this at all, then it started out of the blue, but only on our Dell 730xd machines (and it hits all of them), but no other classes or brands of machines. And we have our 730xd machines loaded up with different brands and models of cards (for instance one dedicated to mlx4 hardware, one for qib, one for mlx5, an ocrdma/cxgb4 combo, etc), so the fact that it hit all of the machines meant it wasn't tied to any particular brand/model of RDMA hardware. To me, it always smelled of a hardware oddity specific to maybe the CPUs or mainboard chipsets in these machines, so given that I'm not an mm expert anyway, I never chased it down. A few other relevant details: it showed up somewhere around 4.8/4.9 or thereabouts. It never happened before, but the prinkt has been there since the 3.18 days, so possibly the test to trigger this message was changed, or something else in the allocator changed such that the situation started happening on these machines? And, like I said, it is specific to our 730xd machines (but they are all identical, so that could mean it's something like their specific ram configuration is causing the allocator to hit this on these machine but not on other machines in the cluster, I don't want to say it's necessarily the model of chipset or CPU, there are other bits of identicalness between these machines)" Link: http://lkml.kernel.org/r/499c0f6cc10d6eb829a67f2a4d75b4228a9b356e.1501695897.git.jtoppins@redhat.comSigned-off-by:
Jonathan Toppins <jtoppins@redhat.com> Reviewed-by:
Doug Ledford <dledford@redhat.com> Tested-by:
-
Johannes Weiner authored
As Tetsuo points out: "Commit 385386cf ("mm: vmstat: move slab statistics from zone to node counters") broke "Slab:" field of /proc/meminfo . It shows nearly 0kB" In addition to /proc/meminfo, this problem also affects the slab counters OOM/allocation failure info dumps, can cause early -ENOMEM from overcommit protection, and miscalculate image size requirements during suspend-to-disk. This is because the patch in question switched the slab counters from the zone level to the node level, but forgot to update the global accessor functions to read the aggregate node data instead of the aggregate zone data. Use global_node_page_state() to access the global slab counters. Fixes: 385386cf ("mm: vmstat: move slab statistics from zone to node counters") Link: http://lkml.kernel.org/r/20170801134256.5400-1-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Work around Renesas uPD72020x 32-bit DMA issue" * tag 'pci-v4.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue PCI: Add pci_reset_function_locked()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy. 2) Fix stats handling in bcm_sysport_get_stats(), from Florian Fainelli. 3) Reject 16777215 VNI value in geneve_validate(), from Girish Moodalbail. 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov. 5) Once a UFO fragmented frame is treated as UFO, we should continue doing so. Likewise once a frame has been segmented, we should continue doing that and not try to convert it to a UFO frame. From Willem de Bruijn. 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to prevent races. From Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: packet: fix tp_reserve race in packet_set_ring udp: consistently apply ufo or fragmentation net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target igmp: Fix regression caused by igmp sysctl namespace code. geneve: maximum value of VNI cannot be used net: systemport: Fix software statistics for SYSTEMPORT Lite tipc: remove premature ESTABLISH FSM event at link synchronization -
Willem de Bruijn authored
Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais. 2) Prevent crashes when bringing up sunvdc virtual block devices in some environments. From Jim Quigley. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8. sparc64: recognize and support sparc M8 cpu type sparc64: properly name the cpu constants -
Byungchul Park authored
This document describes the concept of crossrelease feature. Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Byungchul Park authored
Although wait_for_completion() and its family can cause deadlock, the lock correctness validator could not be applied to them until now, because things like complete() are usually called in a different context from the waiting context, which violates lockdep's assumption. Thanks to CONFIG_LOCKDEP_CROSSRELEASE, we can now apply the lockdep detector to those completion operations. Applied it. Signed-off-by:
-
Byungchul Park authored
print_circular_bug() reporting circular bug assumes that target hlock is owned by the current. However, in crossrelease, target hlock can be owned by other than the current. So the report format needs to be changed to reflect the change. Signed-off-by:
-
Byungchul Park authored
No acquisition might be in progress on commit of a crosslock. Completion operations enabling crossrelease are the case like: CONTEXT X CONTEXT Y --------- --------- trigger completion context complete AX commit AX wait_for_complete AX acquire AX wait where AX is a crosslock. When no acquisition is in progress, we should not perform commit because the lock does not exist, which might cause incorrect memory access. So we have to track the number of acquisitions of a crosslock to handle it. Moreover, in case that more than one acquisition of a crosslock are overlapped like: CONTEXT W CONTEXT X CONTEXT Y CONTEXT Z --------- --------- --------- --------- acquire AX (gen_id: 1) acquire A acquire AX (gen_id: 10) acquire B commit AX acquire C commit AX where A, B and C are typical locks and AX is a crosslock. Current crossrelease code performs commits in Y and Z with gen_id = 10. However, we can use gen_id = 1 to do it, since not only 'acquire AX in X' but 'acquire AX in W' also depends on each acquisition in Y and Z until their commits. So make it use gen_id = 1 instead of 10 on their commits, which adds an additional dependency 'AX -> A' in the example above. Signed-off-by: -
Byungchul Park authored
The ring buffer can be overwritten by hardirq/softirq/work contexts. That cases must be considered on rollback or commit. For example, |<------ hist_lock ring buffer size ----->| ppppppppppppiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii wrapped > iiiiiiiiiiiiiiiiiiiiiii.................... where 'p' represents an acquisition in process context, 'i' represents an acquisition in irq context. On irq exit, crossrelease tries to rollback idx to original position, but it should not because the entry already has been invalid by overwriting 'i'. Avoid rollback or commit for entries overwritten. Signed-off-by: -
Byungchul Park authored
Lockdep is a runtime locking correctness validator that detects and reports a deadlock or its possibility by checking dependencies between locks. It's useful since it does not report just an actual deadlock but also the possibility of a deadlock that has not actually happened yet. That enables problems to be fixed before they affect real systems. However, this facility is only applicable to typical locks, such as spinlocks and mutexes, which are normally released within the context in which they were acquired. However, synchronization primitives like page locks or completions, which are allowed to be released in any context, also create dependencies and can cause a deadlock. So lockdep should track these locks to do a better job. The 'crossrelease' implementation makes these primitives also be tracked. Signed-off-by:
-
Byungchul Park authored
Currently, a space for stack_trace is pinned in check_prev_add(), that makes us not able to use external stack_trace. The simplest way to achieve it is to pass an external stack_trace as an argument. A more suitable solution is to pass a callback additionally along with a stack_trace so that callers can decide the way to save or whether to save. Actually crossrelease needs to do other than saving a stack_trace. So pass a stack_trace and callback to handle it, to check_prev_add(). Signed-off-by:
-
Byungchul Park authored
Firstly, return 1 instead of 2 when 'prev -> next' dependency already exists. Since the value 2 is not referenced anywhere, just return 1 indicating success in this case. Secondly, return 2 instead of 1 when successfully added a lock_list entry with saving stack_trace. With that, a caller can decide whether to avoid redundant save_trace() on the caller site. Signed-off-by:
-
Byungchul Park authored
Crossrelease needs to build a chain between two classes regardless of their contexts. However, add_chain_cache() cannot be used for that purpose since it assumes that it's called in the acquisition context of the hlock. So this patch introduces a new function doing it. Signed-off-by:
-
Byungchul Park authored
Currently, lookup_chain_cache() provides both 'lookup' and 'add' functionalities in a function. However, each is useful. So this patch makes lookup_chain_cache() only do 'lookup' functionality and makes add_chain_cahce() only do 'add' functionality. And it's more readable than before. Signed-off-by:
-
