Pull more power management updates from Rafael Wysocki:
 "These add support for new hardware (ap807 and AM62A7), fix several
  issues in cpufreq drivers and in the operating performance points
  (OPP) framework, fix up intel_idle after recent changes and add
  documentation.

  Specifics:

   - Add missing __init annotation to one function in the intel_idle
     drvier (Rafael Wysocki)

   - Make intel_pstate use a correct scaling factor when mapping HWP
     performance levels to frequency values on hybrid-capable systems
     with disabled E-cores (Srinivas Pandruvada)

   - Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
     Kumar)

   - Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)

   - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)

   - Add support for TI's AM62A7 platform (Vibhore Vardhan)

   - Add support for Armada's ap807 platform (Russell King (Oracle))

   - Add support for StarFive JH7110 SoC (Mason Huo)

   - Fix voltage selection for Mediatek Socs (Daniel Golle)

   - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)

   - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)

   - Don't warn for disabling a non-existing frequency for imx6q cpufreq
     driver (Christoph Niedermaier)

   - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)

   - Simplify performance state related logic in the OPP core (Viresh
     Kumar)

   - Fix use-after-free and improve locking around lazy_opp_tables
     (Viresh Kumar, Stephan Gerhold)

   - Minor cleanups - using dev_err_probe() and rate-limiting debug
     messages (Andrew Halaney, Adrián Larumbe)"

* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
  cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
  intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
  OPP: Properly propagate error along when failing to get icc_path
  OPP: Use dev_err_probe() when failing to get icc_path
  cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  cpufreq: mediatek: correct voltages for MT7622 and MT7623
  cpufreq: armada-8k: add ap807 support
  OPP: Simplify the over-designed pstate <-> level dance
  OPP: pstate is only valid for genpd OPP tables
  OPP: don't drop performance constraint on OPP table removal
  OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
  OPP: Staticize `lazy_opp_tables` in of.c
  cpufreq: dt-platdev: Support building as module
  opp: Fix use-after-free in lazy_opp_tables after probe deferral
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
  cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
  cpufreq: ti-cpufreq: Add support for AM62A7
  OPP: rate-limit debug messages when no change in OPP is required
  cpufreq: imx6q: don't warn for disabling a non-existing frequency
  ...

Pull more clk updates from Stephen Boyd:
 "Another set of clk driver updates and fixes for the merge window. The
  driver updates needed more time to bake in linux-next.

  Updates:
   - Support for more clk controllers in Qualcomm SoCs such as SM8350,
     SM8450, SDX75, SC8280XP, and IPQ9574
   - Runtime PM enablement of some more Qualcomm clk controllers
   - Various fixes to Qualcomm clk driver data to use correct clk_ops
     and to check halt bits properly
   - AT91 updates to modernize with clk_parent_data structures

  Fixes:
   - Remove 'syscon' from dt binding fix for ti,j721e-system-controller
   - Fix determine rate in the Tegra driver that got wrecked by the
     refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
  clk: tegra: Avoid calling an uninitialized function
  dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  ...

Pull firewire updates from Takashi Sakamoto:
 "This consist of three parts; UAPI update, OHCI driver update, and
  several bug fixes.

  Firstly, the 1394 OHCI specification defines method to retrieve
  hardware time stamps for asynchronous communication, which was
  previously unavailable in user space. This adds new events to the
  UAPI, allowing applications to retrieve the time when asynchronous
  packet are received and sent. The new events are tested in the
  bleeding edge of libhinawa and look to work well. The new version of
  libhinawa will be released after current merge window is closed:

    https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/

  Secondly, the FireWire stack includes a PCM device driver for 1394
  OHCI hardware, This change modernizes the driver by managed resource
  (devres) framework.

  Lastly, bug fixes for firewire-net and firewire-core"

* tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits)
  firewire: net: fix use after free in fwnet_finish_incoming_packet()
  firewire: core: obsolete usage of GFP_ATOMIC at building node tree
  firewire: ohci: release buffer for AR req/resp contexts when managed resource is released
  firewire: ohci: use devres for content of configuration ROM
  firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts
  firewire: ohci: use devres for list of isochronous contexts
  firewire: ohci: use devres for requested IRQ
  firewire: ohci: use devres for misc DMA buffer
  firewire: ohci: use devres for MMIO region mapping
  firewire: ohci: use devres for PCI-related resources
  firewire: ohci: use devres for memory object of ohci structure
  firewire: fix warnings to generate UAPI documentation
  firewire: fix build failure due to missing module license
  firewire: cdev: implement new event relevant to phy packet with time stamp
  firewire: cdev: add new event to notify phy packet with time stamp
  firewire: cdev: code refactoring to dispatch event for phy packet
  firewire: cdev: implement new event to notify response subaction with time stamp
  firewire: cdev: add new event to notify response subaction with time stamp
  firewire: cdev: code refactoring to operate event of response
  firewire: core: implement variations to send request and wait for response with time stamp
  ...

Vegard Nossum pointed out two different problems with the error handling
in init_module_from_file():

 (a) the idempotent loading code didn't clean up properly in some error
     cases, leaving the on-stack 'struct idempotent' element still in
     the hash table

 (b) failure to read the module file would nonsensically update the
     'invalid_kread_bytes' stat counter with the error value

The first error is quite nasty, in that it can then cause subsequent
idempotent loads of that same file to access stale stack contents of the
previous failure.  The case may not happen in any normal situation
(explaining all the "Tested-by's on the original change), and requires
admin privileges, but syzkaller triggers random bad behavior as a
result:

    BUG: soft lockup in sys_finit_module
    BUG: unable to handle kernel paging request in init_module_from_file
    general protection fault in init_module_from_file
    INFO: task hung in init_module_from_file
    KASAN: out-of-bounds Read in init_module_from_file
    KASAN: slab-out-of-bounds Read in init_module_from_file
    ...

The second error is fairly benign and just leads to nonsensical stats
(and has been around since the debug stats were added).

Vegard also provided a patch for the idempotent loading issue, but I'd
rather re-organize the code and make it more legible using another level
of helper functions than add the usual "goto out" error handling.

Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/
Fixes: 9b9879fc ("modules: catch concurrent module loads, treat them as idempotent")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge CPU power management updates for 6.5-rc1:

 - Add missing __init annotation to one function in the intel_idle
   drvier (Rafael Wysocki).

 - Make intel_pstate use a correct scaling factor when mapping HWP
   performance levels to frequency values on hybrid-capable systems
   with disabled E-cores (Srinivas Pandruvada).

 - Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
   Kumar).

 - Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang).

 - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).

 - Add support for TI's AM62A7 platform (Vibhore Vardhan).

 - Add support for Armada's ap807 platform (Russell King (Oracle)).

 - Add support for StarFive JH7110 SoC (Mason Huo).

 - Fix voltage selection for Mediatek Socs (Daniel Golle).

 - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).

 - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).

 - Don't warn for disabling a non-existing frequency for imx6q cpufreq
   driver (Christoph Niedermaier).

 - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney).

* pm-cpufreq:
  cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
  cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
  cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  cpufreq: mediatek: correct voltages for MT7622 and MT7623
  cpufreq: armada-8k: add ap807 support
  cpufreq: dt-platdev: Support building as module
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
  cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
  cpufreq: ti-cpufreq: Add support for AM62A7
  cpufreq: imx6q: don't warn for disabling a non-existing frequency
  cpufreq: sparc: Don't allocate cpufreq_driver dynamically
  cpufreq: tegra194: Fix an error handling path in tegra194_cpufreq_probe()
  cpufreq: dt-platdev: Add JH7110 SOC to the allowlist

* pm-cpuidle:
  intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()

Commit 493ffb04 ("clk: tegra: super: Switch to determine_rate")
replaced clk_super_round_rate() by clk_super_determine_rate(), but
didn't update one callsite that was explicitly calling the old
tegra_clk_super_ops.round_rate() function, which was now NULL. This
resulted in a crash on Tegra30 systems during early boot.

Switch this callsite over to the clk_super_determine_rate() equivalent
to avoid the crash.

Fixes: 493ffb04 ("clk: tegra: super: Switch to determine_rate")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

This is an addition to commit ae80b404 ("mm: validate the mm before
dropping the mmap lock"), because it turns out there were two problems,
but lockdep just stopped complaining after finding the first one.

The do_vmi_align_munmap() function now drops the mmap lock after doing
the validate_mm() call, but it turns out that one of the callers then
immediately calls validate_mm() again.

That's both a bit silly, and now (again) happens without the mmap lock
held.

So just remove that validate_mm() call from the caller, but make sure to
not lose any coverage by doing that mm sanity checking in the error path
of do_vmi_align_munmap() too.
Reported-and-tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKN6CdkKyxBShPHi@xsang-OptiPlex-9020/
Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ae870a68 ("arm64/mm: Convert to using
lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if
CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the
ifdef.

As a result, building kernel without the config fails with undeclared
variable error as below:

    arch/arm64/mm/fault.c: In function 'do_page_fault':
    arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'?
      624 |  vma = lock_mm_and_find_vma(mm, addr, regs);
          |  ^~~
          |  vmap

Fix it by moving the declaration out of the ifdef.

Fixes: ae870a68 ("arm64/mm: Convert to using lock_mm_and_find_vma()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more block updates from Jens Axboe:
 "Mostly items that came in a bit late for the initial pull request,
  wanted to make sure they had the appropriate amount of linux-next soak
  before going upstream.

  Outside of stragglers, just generic fixes for either merge window
  items, or longer standing bugs"

* tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits)
  md/raid0: add discard support for the 'original' layout
  nvme: disable controller on reset state failure
  nvme: sync timeout work on failed reset
  nvme: ensure unquiesce on teardown
  cdrom/gdrom: Fix build error
  nvme: improved uring polling
  block: add request polling helper
  nvme-mpath: fix I/O failure with EAGAIN when failing over I/O
  nvme: host: fix command name spelling
  blk-sysfs: add a new attr_group for blk_mq
  blk-iocost: move wbt_enable/disable_default() out of spinlock
  blk-wbt: cleanup rwb_enabled() and wbt_disabled()
  blk-wbt: remove dead code to handle wbt enable/disable with io inflight
  blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled
  blk-mq: fix two misuses on RQF_USE_SCHED
  blk-throttle: Fix io statistics for cgroup v1
  bcache: Fix bcache device claiming
  bcache: Alloc holder object before async registration
  raid10: avoid spin_lock from fastpath from raid10_unplug()
  md: fix 'delete_mutex' deadlock
  ...

Pull io_uring fixes from Jens Axboe:
 "The fix for the msghdr->msg_inq assigned value being wrong, using -1
  instead of -1U for the signed type.

  Also a fix for ensuring when we're trying to run task_work on an
  exiting task, that we wait for it. This is not really a correctness
  thing as the work is being canceled, but it does help with ensuring
  file descriptors are closed when the task has exited."

* tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux:
  io_uring: flush offloaded and delayed task_work on exit
  io_uring: remove io_fallback_tw() forward declaration
  io_uring/net: use proper value for msg_inq

Pull HSI updates from Sebastian Reichel:

 - fix build warning with W=1

 - drop error handling for debugfs

* tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: Drop error checking for debugfs_create_dir
  HSI: fix ssi_waketest() declaration

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...

Pull remoteproc updates from Bjorn Andersson:
 "The bulk of these patches relates to the moving to a void-returning
  remove callback.

  The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
  resolve build warnings about 'defined but not used' variables in
  certain configurations.

  The ST STM32 remoteproc driver is extended to allow using a SCMI reset
  controller to hold boot, and has an error message corrected.

  The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
  adsp_segment_dump()"

* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
  remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
  remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
  remoteproc: stm32: Allow hold boot management by the SCMI reset controller
  dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
  remoteproc: imx_dsp_rproc: use modern pm_ops
  remoteproc: wkup_m3: Convert to platform remove callback returning void
  remoteproc: stm32: Convert to platform remove callback returning void
  remoteproc: st: Convert to platform remove callback returning void
  remoteproc: virtio: Convert to platform remove callback returning void
  remoteproc: rcar: Convert to platform remove callback returning void
  remoteproc: qcom_wcnss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
  remoteproc: pru: Convert to platform remove callback returning void
  remoteproc: omap: Convert to platform remove callback returning void
  remoteproc: mtk_scp: Convert to platform remove callback returning void
  remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
  remoteproc: keystone: Convert to platform remove callback returning void
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This drops the last of_match_ptr() from the hwspinlock drivers,
  solving the resulting 'defined but not used' warning/error"

* tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: omap: drop of_match_ptr for ID table

After a change to the bnxt_re driver, it fails to link when
CONFIG_INFINIBAND_USER_ACCESS is disabled:

  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE':
  ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file'
  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class'
  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler'

The problem is that the 'bnxt_re_uapi_defs' structure is built
unconditionally and references a couple of functions that are never
really called in this configuration but instead require other functions
that are left out.

Adding an #ifdef around the new code, or a Kconfig dependency would
address this problem, but adding the compile-time check inside of the
UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also
addresses the problem in other drivers that may run into the same
dependency.

Fixes: 360da60d ("RDMA/bnxt_re: Enable low latency push")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull virtio updates from Michael Tsirkin:

 - resume support in vdpa/solidrun

 - structure size optimizations in virtio_pci

 - new pds_vdpa driver

 - immediate initialization mechanism for vdpa/ifcvf

 - interrupt bypass for vdpa/mlx5

 - multiple worker support for vhost

 - viirtio net in Intel F2000X-PL support for vdpa/ifcvf

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  vhost: Make parameter name match of vhost_get_vq_desc()
  vduse: fix NULL pointer dereference
  vhost: Allow worker switching while work is queueing
  vhost_scsi: add support for worker ioctls
  vhost: allow userspace to create workers
  vhost: replace single worker pointer with xarray
  vhost: add helper to parse userspace vring state/file
  vhost: remove vhost_work_queue
  vhost_scsi: flush IO vqs then send TMF rsp
  vhost_scsi: convert to vhost_vq_work_queue
  vhost_scsi: make SCSI cmd completion per vq
  vhost_sock: convert to vhost_vq_work_queue
  vhost: convert poll work to be vq based
  vhost: take worker or vq for flushing
  vhost: take worker or vq instead of dev for queueing
  vhost, vhost_net: add helper to check if vq has work
  vhost: add vhost_worker pointer to vhost_virtqueue
  vhost: dynamically allocate vhost_worker
  vhost: create worker at end of vhost_dev_set_owner
  virtio_bt: call scheduler when we free unused buffs
  ...

Pull kvm updates from Paolo Bonzini:
 "ARM64:

   - Eager page splitting optimization for dirty logging, optionally
     allowing for a VM to avoid the cost of hugepage splitting in the
     stage-2 fault path.

   - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
     with services that live in the Secure world. pKVM intervenes on
     FF-A calls to guarantee the host doesn't misuse memory donated to
     the hyp or a pKVM guest.

   - Support for running the split hypervisor with VHE enabled, known as
     'hVHE' mode. This is extremely useful for testing the split
     hypervisor on VHE-only systems, and paves the way for new use cases
     that depend on having two TTBRs available at EL2.

   - Generalized framework for configurable ID registers from userspace.
     KVM/arm64 currently prevents arbitrary CPU feature set
     configuration from userspace, but the intent is to relax this
     limitation and allow userspace to select a feature set consistent
     with the CPU.

   - Enable the use of Branch Target Identification (FEAT_BTI) in the
     hypervisor.

   - Use a separate set of pointer authentication keys for the
     hypervisor when running in protected mode, as the host is untrusted
     at runtime.

   - Ensure timer IRQs are consistently released in the init failure
     paths.

   - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
     Traps (FEAT_EVT), as it is a register commonly read from userspace.

   - Erratum workaround for the upcoming AmpereOne part, which has
     broken hardware A/D state management.

  RISC-V:

   - Redirect AMO load/store misaligned traps to KVM guest

   - Trap-n-emulate AIA in-kernel irqchip for KVM guest

   - Svnapot support for KVM Guest

  s390:

   - New uvdevice secret API

   - CMM selftest and fixes

   - fix racy access to target CPU for diag 9c

  x86:

   - Fix missing/incorrect #GP checks on ENCLS

   - Use standard mmu_notifier hooks for handling APIC access page

   - Drop now unnecessary TR/TSS load after VM-Exit on AMD

   - Print more descriptive information about the status of SEV and
     SEV-ES during module load

   - Add a test for splitting and reconstituting hugepages during and
     after dirty logging

   - Add support for CPU pinning in demand paging test

   - Add support for AMD PerfMonV2, with a variety of cleanups and minor
     fixes included along the way

   - Add a "nx_huge_pages=never" option to effectively avoid creating NX
     hugepage recovery threads (because nx_huge_pages=off can be toggled
     at runtime)

   - Move handling of PAT out of MTRR code and dedup SVM+VMX code

   - Fix output of PIC poll command emulation when there's an interrupt

   - Add a maintainer's handbook to document KVM x86 processes,
     preferred coding style, testing expectations, etc.

   - Misc cleanups, fixes and comments

  Generic:

   - Miscellaneous bugfixes and cleanups

  Selftests:

   - Generate dependency files so that partial rebuilds work as
     expected"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
  Documentation/process: Add a maintainer handbook for KVM x86
  Documentation/process: Add a label for the tip tree handbook's coding style
  KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
  RISC-V: KVM: Remove unneeded semicolon
  RISC-V: KVM: Allow Svnapot extension for Guest/VM
  riscv: kvm: define vcpu_sbi_ext_pmu in header
  RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
  RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
  RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
  RISC-V: KVM: Add in-kernel emulation of AIA APLIC
  RISC-V: KVM: Implement device interface for AIA irqchip
  RISC-V: KVM: Skeletal in-kernel AIA irqchip support
  RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
  RISC-V: KVM: Add APLIC related defines
  RISC-V: KVM: Add IMSIC related defines
  RISC-V: KVM: Implement guest external interrupt line management
  KVM: x86: Remove PRIx* definitions as they are solely for user space
  s390/uv: Update query for secret-UVCs
  s390/uv: replace scnprintf with sysfs_emit
  s390/uvdevice: Add 'Lock Secret Store' UVC
  ...

Pull kgdb updates from Daniel Thompson:
 "Fairly small changes this cycle:

   - An additional static inline function when kgdb is not enabled to
     reduce boilerplate in arch files

   - kdb will now handle input with linefeeds more like carriage return.
     This will make little difference for interactive use but can make
     it script to use expect-like interaction with kdb

   - A couple of warning fixes"

* tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: move kdb_send_sig() declaration to a better header file
  kdb: Handle LF in the command parser
  kdb: include kdb_private.h for function prototypes
  kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.

  Included in here are:

   - Lots of USB4/Thunderbolt additions and updates for new hardware
     types and fixes as people are starting to get access to the
     hardware in the wild

   - new gadget controller driver, cdns2, added

   - new typec drivers added

   - xhci driver updates

   - typec driver updates

   - usbip driver fixes

   - usb-serial driver updates and fixes

   - lots of smaller USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
  usb: host: xhci: Do not re-initialize the XHCI HC if being removed
  usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
  usbip: usbip_host: Replace strlcpy with strscpy
  usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  USB: serial: option: add LARA-R6 01B PIDs
  usb: ulpi: Make container_of() no-op in to_ulpi_dev()
  usb: gadget: legacy: fix error return code in gfs_bind
  usb: typec: fsa4480: add support for Audio Accessory Mode
  usb: typec: fsa4480: rework mux & switch setup to handle more states
  usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  USB: gadget: f_hid: make hidg_class a static const structure
  USB: gadget: f_printer: make usb_gadget_class a static const structure
  USB: mon: make mon_bin_class a static const structure
  USB: gadget: udc: core: make udc_class a static const structure
  USB: roles: make role_class a static const structure
  dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
  dt-bindings: usb: Add StarFive JH7110 USB controller
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.5-rc1.

  Included in here are:

   - tty_audit code cleanups from Jiri

   - more 8250 cleanups from Ilpo

   - samsung_tty driver bugfixes

   - 8250 lock port updates

   - usual fsl_lpuart driver updates and fixes

   - other small serial driver fixes and updates, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  tty_audit: make data of tty_audit_log() const
  tty_audit: make tty pointers in exposed functions const
  tty_audit: make icanon a bool
  tty_audit: invert the condition in tty_audit_log()
  tty_audit: use kzalloc() in tty_audit_buf_alloc()
  tty_audit: use TASK_COMM_LEN for task comm
  Revert "8250: add support for ASIX devices with a FIFO bug"
  serial: atmel: don't enable IRQs prematurely
  tty: serial: Add Nuvoton ma35d1 serial driver support
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  tty: serial: imx: fix rs485 rx after tx
  selftests: tty: add selftest for tty timestamp updates
  tty: tty_io: update timestamps on all device nodes
  tty: fix hang on tty device with no_room set
  serial: core: fix -EPROBE_DEFER handling in init
  serial: 8250_omap: Use force_suspend and resume for system suspend
  tty: serial: samsung_tty: Use abs() to simplify some code
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
  ...

Pull staging driver updates from Greg KH:
 "Here is a set of staging driver updates for 6.5-rc1. It's a small
  update this merge window, nothing major at all, overall just under
  1000 lines of code removed, not a huge churn.

  Nothing major to highlight here either, just lots of small coding
  style fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (62 commits)
  staging: rtl8192e: Remove whitespace and blank lines
  staging: rtl8192e: remove 5G related code
  staging: rtl8192e: remove comparison to true
  staging: rtl8192e: remove return statement from void function
  staging: rtl8192e: convert else if sequence to switch
  staging: rtl8192e: clean up brace coding style issues
  staging: rtl8723bs: Fix blank line issues
  staging: rtl8723bs: Fix block comment issue
  staging: rtl8723bs: Fix indentation issues
  staging: vchiq_arm: Remove extra struct vchiq_instance declaration
  staging: rtl8192e: Rename variable InitialGainHandler
  staging: rtl8192e: Rename variable LeisurePSLeave
  staging: rtl8192e: Rename variable SetBWModeHandler
  staging: rtl8192e: Rename variable SetWirelessMode
  staging: rtl8192e: Rename RTLLIB_LINKED_SCANNING
  staging: rtl8192e: Rename RTLLIB_LINKED to MAC80211_LINKED
  staging: rtl8192e: Rename RTLLIB_NOLINK to MAC80211_NOLINK
  staging: rtl8192e: Rename state to link_state
  staging: rtl8192e: Rename rtllib_state to rtl_link_state
  staging: rtl8192e: Remove unused enum led_ctl_mode
  ...

Pull driver core updates from Greg KH:
 "Here are a small set of changes for 6.5-rc1 for some driver core
  changes. Included in here are:

   - device property cleanups to make it easier to write "agnostic"
     drivers when regards to the firmware layer underneath them (DT vs.
     ACPI)

   - debugfs documentation updates

   - devres additions

   - sysfs documentation and changes to handle empty directory creation
     logic better

   - tiny kernfs optimizations

   - other tiny changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Skip empty folders creation
  sysfs: Improve readability by following the kernel coding style
  drivers: fwnode: fix fwnode_irq_get[_byname]()
  ata: ahci_platform: Make code agnostic to OF/ACPI
  device property: Implement device_is_compatible()
  ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
  base/node: Use 'property' to identify an access parameter
  driver core: device.h: add some missing kerneldocs
  kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
  isa: Remove unnecessary checks
  MAINTAINERS: add entry for auxiliary bus
  debugfs: Correct the 'debugfs_create_str' docs
  serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  iio: adc: Use devm_krealloc_array
  hwmon: pmbus: Use devm_krealloc_array

Pull Char/Misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.5-rc1.

  Lots of different, tiny, stuff in here, from a range of smaller driver
  subsystems, including pulls from some substems directly:

   - IIO driver updates and additions

   - W1 driver updates and fixes (and a new maintainer!)

   - FPGA driver updates and fixes

   - Counter driver updates

   - Extcon driver updates

   - Interconnect driver updates

   - Coresight driver updates

   - mfd tree tag merge needed for other updates on top of that, lots of
     small driver updates as patches, including:

   - static const updates for class structures

   - nvmem driver updates

   - pcmcia driver fix

   - lots of other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
  bsr: fix build problem with bsr_class static cleanup
  comedi: make all 'class' structures const
  char: xillybus: make xillybus_class a static const structure
  xilinx_hwicap: make icap_class a static const structure
  virtio_console: make port class a static const structure
  ppdev: make ppdev_class a static const structure
  char: misc: make misc_class a static const structure
  /dev/mem: make mem_class a static const structure
  char: lp: make lp_class a static const structure
  dsp56k: make dsp56k_class a static const structure
  bsr: make bsr_class a static const structure
  oradax: make 'cl' a static const structure
  hwtracing: hisi_ptt: Fix potential sleep in atomic context
  hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
  hwtracing: hisi_ptt: Export available filters through sysfs
  hwtracing: hisi_ptt: Add support for dynamically updating the filter list
  hwtracing: hisi_ptt: Factor out filter allocation and release operation
  samples: pfsm: add CC_CAN_LINK dependency
  misc: fastrpc: check return value of devm_kasprintf()
  coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Add lots of Device Tree bindings / support
   - Turn off LED strings when display is blank
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous NULL checks
   - Only obtain PWM information once and do it in .probe()

  Fix-ups:
   - Ensure locks are obtained and held when required"

* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Take led_access lock when required
  video: backlight: lp855x: Get PWM for PWM mode during probe
  dt-bindings: backlight: lp855x: Convert to YAML and modernize
  dt-bindings: backlight: pwm: Make power-supply not required
  backlight: pwm_bl: Remove unneeded checks for valid GPIOs
  backlight: Switch i2c drivers back to use .probe()
  backlight: lm3630a: Turn off both led strings when display is blank
  dt-bindings: leds: backlight: ktz8866: Add reg property and update example

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
   - Add support for Awinic AW20036/AW20054/AW20072 LEDs

  New Device Support:
   - Add support for PMI632 LPG to QCom LPG
   - Add support for PMI8998 to QCom Flash
   - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC

  New Functionality:
   - Implement the LP55xx Charge Pump
   - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
   - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
   - Enable per-pin resolution Pinctrl in LEDs GPIO

  Fix-ups:
   - Allow thread to sleep by switching from spinlock to mutex
   - Add lots of Device Tree bindings / support
   - Adapt relationships / dependencies driven by Kconfig
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous / duplicate code
   - Replace strlcpy() with strscpy() for efficiency and overflow prevention
   - Staticify various functions
   - Trivial: Fixing coding style
   - Simplify / reduce code

  Bug Fixes:
   - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
   - Repair race between led_set_brightness(LED_{OFF,FULL})
   - Fix Oops relating to sleeping in critical sections
   - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
   - Do not leak resources in error handling paths
   - Fix unsigned comparison which can never be negative
   - Provide missing NULL terminating entries in tables
   - Fix misnaming issues"

* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
  leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  leds: sgm3140: Add richtek,rt5033-led compatible
  dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  dt-bindings: leds: Drop unneeded quotes
  leds: Fix config reference for AW200xx driver
  leds: leds-mt6323: Add support for WLEDs and MT6332
  leds: leds-mt6323: Add support for MT6331 leds
  leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
  leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
  leds: leds-mt6323: Specify registers and specs in platform data
  dt-bindings: leds: leds-mt6323: Document mt6332 compatible
  dt-bindings: leds: leds-mt6323: Document mt6331 compatible
  leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
  leds: simatic-ipc-leds-gpio: Split up into multiple drivers
  leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
  leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
  leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
  leds: cht-wcove: Remove unneeded semicolon
  leds: cht-wcove: Fix an unsigned comparison which can never be negative
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

Pull mailbox updates from Jassi Brar:

 - tegra: support for Tegra264

 - broadcom: convert bcm2835 bindings from txt to yaml bcm2835

 - qcom: support for IPQ5018

 - ti: always zero TX data fields

* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
  mailbox: tegra: add support for Tegra264
  dt-bindings: mailbox: tegra: Document Tegra264 HSP
  dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
  dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible

Pull RTC updates from Alexandre Belloni:
 "The isl1208 dirver was reworked tobe able to work as part of an MFD.

  All the Loongson chips are now supported through a new driver, the old
  one is removed.

  Summary:

  Subsystem:
   - Switch i2c drivers back to use .probe()
   - Constify pointers to hwmon_channel_info

  New driver:
   - Loongson on chip RTC, replacing the Loongson 1 only driver

  Drivers:
   - isl1208: cleanup and support for RAA215300
   - st-lpc: cleanups
   - stm32: fix wakeup"

* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
  rtc: Add rtc driver for the Loongson family chips
  rtc: Remove the Loongson-1 RTC driver
  dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
  rtc: rv3028: make rv3028 probeable from userspace
  rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
  rtc: isl1208: Add isl1208_set_xtoscb()
  rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
  rtc: isl1208: Make similar I2C and DT-based matching table
  rtc: isl1208: Drop name variable
  dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
  dt-bindings: rtc: isl1208: Convert to json-schema
  rtc: st-lpc: Simplify clk handling in st_rtc_probe()
  rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
  rtc: stm32: remove dedicated wakeup management
  dt-bindings: rtc: restrict node name suffixes
  rtc: add HAS_IOPORT dependencies
  rtc: Switch i2c drivers back to use .probe()
  rtc: rv3032: constify pointers to hwmon_channel_info
  rtc: isl12022: constify pointers to hwmon_channel_info
  rtc: ds3232: constify pointers to hwmon_channel_info
  ...

Pull i3c updates from Alexandre Belloni:

 - svc: fix suspend/resume on some platforms, fix locking issues

* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: add NACK check after start byte sent
  i3c: master: svc: fix cpu schedule in spin lock
  i3c: master: svc: fix i3c suspend/resume issue

Commit 408579cd ("mm: Update do_vmi_align_munmap() return
semantics") made the return value and locking semantics of
do_vmi_align_munmap() more straightforward, but in the process it ended
up unlocking the mmap lock just a tad too early: the debug code doing
the mmap layout validation still needs to run with the lock held, or
things might change under it while it's trying to validate things.

So just move the unlocking to after the validate_mm() call.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKIsoMOT71uwCIZX@xsang-OptiPlex-9020/
Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.

But it turns out that in commit 8d7071af ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:

	if (!(vma->vm_flags & VM_GROWSDOWN))
		return -EFAULT;

and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.

At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.

The solution is instead to just codify the fact that yes, during
execve(), the stack grows down.  This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).

So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.

Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.

Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The parameter name in the function declaration and definition
should be the same.

drivers/vhost/vhost.h,
int vhost_get_vq_desc(..., unsigned int iov_count,...);

drivers/vhost/vhost.c,
int vhost_get_vq_desc(..., unsigned int iov_size,...)
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230621093835.36878-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.

This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.

[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS:  00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074]  <TASK>
[ 4761.096180]  ? __die+0x1f/0x70
[ 4761.099238]  ? page_fault_oops+0x171/0x4f0
[ 4761.103340]  ? exc_page_fault+0x7b/0x180
[ 4761.107265]  ? asm_exc_page_fault+0x22/0x30
[ 4761.111460]  ? memcpy_orig+0xc5/0x130
[ 4761.115126]  vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533]  virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635]  remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781]  virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580]  virtio_dev_remove+0x3a/0x90
[ 4761.140509]  device_release_driver_internal+0x19b/0x200
[ 4761.145742]  bus_remove_device+0xc2/0x130
[ 4761.149755]  device_del+0x158/0x3e0
[ 4761.153245]  ? kernfs_find_ns+0x35/0xc0
[ 4761.157086]  device_unregister+0x13/0x60
[ 4761.161010]  unregister_virtio_device+0x11/0x20
[ 4761.165543]  device_release_driver_internal+0x19b/0x200
[ 4761.170770]  bus_remove_device+0xc2/0x130
[ 4761.174782]  device_del+0x158/0x3e0
[ 4761.178276]  ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336]  device_unregister+0x13/0x60
[ 4761.187260]  vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa]

Fixes: 28f6288e ("vduse: Support set_vq_affinity callback")
Cc: xieyongji@bytedance.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230622204851.318125-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>

This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.

We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.

With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64  --numjobs=16

which gives around 2002K IOPs.

Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-17-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.

To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.

This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:

1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.

2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-15-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-14-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-13-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.

With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-12-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>