- 30 Jan, 2022 13 commits
-
-
Liam Beguin authored
Includes should be ordered alphabetically which is already the case, but follow what is done in other drivers by separation IIO specific headers with a blank line. Signed-off-by:
Liam Beguin <liambeguin@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220108205319.2046348-6-liambeguin@gmail.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Liam Beguin authored
All four scaling coefficients can take signed values. Make tmp a signed 64-bit integer and switch to div_s64() to preserve signs during 64-bit divisions. Fixes: 8b74816b ("iio: afe: rescale: new driver") Signed-off-by:
Peter Rosin <peda@axentia.se> Reviewed-by:
-
Liam Beguin authored
iio_convert_raw_to_processed_unlocked() assumes the offset is an integer. Make a best effort to get a valid offset value for fractional cases without breaking implicit truncations. Fixes: 48e44ce0 ("iio:inkern: Add function to read the processed value") Signed-off-by:
-
Liam Beguin authored
When a consumer calls iio_read_channel_processed() and no channel scale is available, it's assumed that the scale is one and the raw value is returned as expected. On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied. This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer. Fixes: adc8ec5f ("iio: inkern: pass through raw values if no scaling") Signed-off-by:
-
Liam Beguin authored
When a consumer calls iio_read_channel_processed() and the channel has an integer scale, the scale channel scale is applied and the processed value is returned as expected. On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied. This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer. Fixes: 48e44ce0 ("iio:inkern: Add function to read the processed value") Signed-off-by:
-
Kai-Heng Feng authored
x86 boards may use ACPI HID "TXNW1010" for the hdc100x device. TI told us "The ACPI ID for TI is: https://uefi.org/node/1028 (TXNW), therefore it would most likely be appropriate to use TXNW1010." So add an ACPI match table for that accordingly. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
-
Kai-Heng Feng authored
x86 boards may use ACPI HID "IFX3100" for the dps310 device. Vendor told us feel free to add the ID and contact "Saumitra.Chafekar@infineon.com" for further questions. So add an ACPI match table for that accordingly. Reviewed-by:
-
Jongpil Jung authored
To convert SX9360 status register ["REG_STAT"], into a channel index, we need to right shift by |stat_offset|, not left shift. Also the PROXSTAT bit (3) is for channel 1 (PHM, Phase Measured), not (PHR, Phase Reference, channel 0), so the offset is 2 instead of 3. Fixes: 1cdb4c47 ("iio:proximity:sx9360: Add sx9360 support") Signed-off-by:
Jongpil Jung <jongpil19.jung@samsung.com> Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220122213444.745152-1-gwendal@chromium.orgSigned-off-by:
-
Andy Shevchenko authored
Instead of custom data type re-use generic struct u32_fract. No changes intended. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220126135353.24007-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Instead of custom data type re-use generic struct s16_fract. No changes intended. Signed-off-by:
-
Andy Shevchenko authored
Instead of custom data type re-use generic struct u16_fract. No changes intended. Signed-off-by:
-
Andy Shevchenko authored
Introduce a macro to produce data types like struct TYPE_fract { __TYPE numerator; __TYPE denominator; }; to be used in the code wherever it's needed. In the following changes convert some users to it. Signed-off-by: -
Rob Herring authored
The QCom SPMI PMIC child nodes are defined to have a single address cell, but the example has an erroneous size cell. Remove it. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220126231217.1633935-1-robh@kernel.orgSigned-off-by:
-
- 23 Jan, 2022 27 commits
-
-
Oleksij Rempel authored
To avoid problematic devicetree configurations. Set allocation limit with error message and suggestion on what can be done to solve this issue. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220117082852.3370869-2-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Add read_raw() support to make use of iio_hwmon and other iio clients. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/iio/buffer/industrialio-hw-consumer.c:63:23: warning: using sizeof on a flexible structure when using CF='-Wflexible-array-sizeof' Link: https://github.com/KSPP/linux/issues/174Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220120225243.GA37225@embeddedorSigned-off-by:
-
Nuno Sá authored
Minor stylistic changes to address checkptach complains when called with '--strict'. Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220122130905.99-3-nuno.sa@analog.comSigned-off-by:
-
Nuno Sá authored
There's no need to use '__builtin_choose_expr' to choose the right call to 'adis_update_bits_base()'. We can change the 'BUILD_BUG_ON()' condition so that it makes sure only the supported sizes are passed in. With that, we can just use 'sizeof(val)' as the size argument of 'adis_update_bits_base()'. Signed-off-by:
-
Nuno Sá authored
The triggered buffer support was missing in the MAINTAINERS file. Add them. Signed-off-by:
-
Antoniu Miclaus authored
Add myself as maintainer for the ADMV8818 driver. Signed-off-by:
Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220117070039.6139-3-antoniu.miclaus@analog.comSigned-off-by:
-
Antoniu Miclaus authored
Add myself as maintainer for the ADMV1013 driver. Signed-off-by:
-
Antoniu Miclaus authored
Add myself as maintainer for the AD7293 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `cleaning_period` device attribute of the sps30 driver. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-14-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `calibration_auto_enable` device attribute of the scd4x driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `battery_low` and `heater_enable` device attributes of the ms_sensors driver shared code. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_power_shunt_resistor` and `in_current_shunt_resistor` device attributes of the max9611 driver. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20211216185217.1054495-11-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom ``in_filter_notch_center_frequency` and fault_ovuv` device attributes of the max31865 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `fault_ovuv`, `fault_oc` and `in_temp_filter_notch_center_frequency` device attributes of the max31856 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the lm3533 driver. Note this driver was using scnprintf correctly so this change is about ensuring examples of code that might get cut and paste into new drivers are using current best practice. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211216185217.1054495-8-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_allow_async_readout` device attribute of the ina2xx-adc driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `noise_level_tripped` device attribute of the as3935 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the ad9523 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `ac_excitation` and `bridge_swtich` attributes of the ad7192 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() for the `length_align_bytes` buffer attribute. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. This patch converts the places in the IIO core that follow the pattern of return s*printf(...) to return sysfs_emit(...) This covers the new places that have been introduced where sprintf() is used for formatting sysfs output since the last time this was done in commit 83ca56b6 ("iio: core: Use sysfs_emit() (trivial bits)"). Signed-off-by:
-
Oleksij Rempel authored
Initially this was designed to: | Fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() | call | | If iio_trigger_poll() is called after IRQ was disabled, we will call | reenable_trigger() directly from hard IRQ or hrtimer context instead of | IRQ thread. In this case we will run in to multiple issue as sleeping in atomic | context and a deadlock. | | To avoid this issue, rework the trigger to use state machine. All state | changes are done over the hrtimer, so it allows us to drop fsleep() and | avoid the deadlock. Since this issue was fixed by: 9020ef65 ("iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046"). This patch is a cleanup to make state machine easier to follow. Signed-off-by:
-
Antoniu Miclaus authored
Add myself as maintainer for the ADRF6780 driver. Signed-off-by:
-
Antoniu Miclaus authored
The forum link for the Analog Devices linux drivers has changed. Fix the links to redirect to the correct forum subsection. Signed-off-by:
-
Miquel Raynal authored
This is an internal variable, which should be accessed in a very sporadic way and in no case changed by any device driver. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211215151344.163036-2-miquel.raynal@bootlin.comSigned-off-by:
-
Guodong Liu authored
This commit adds mt8186 compatible node. Signed-off-by:
Guodong Liu <guodong.liu@mediatek.com> Acked-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220110084841.575-2-guodong.liu@mediatek.comSigned-off-by:
-
