- 25 Aug, 2019 4 commits
-
-
Yang Shi authored
commit d8835445 upstream. When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should try best to migrate misplaced pages, if some of the pages could not be migrated, then return -EIO. There are three different sub-cases: 1. vma is not migratable 2. vma is migratable, but there are unmovable pages 3. vma is migratable, pages are movable, but migrate_pages() fails If #1 happens, kernel would just abort immediately, then return -EIO, after a7f40cfe ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"). If #3 happens, kernel would set policy and migrate pages with best-effort, but won't rollback the migrated pages and reset the policy back. Before that commit, they behaves in the same way. It'd better to keep their behavior consistent. But, rolling back the migrated pages and resetting the policy back sounds not feasible, so just make #1 behave as same as #3. Userspace will know that not everything was successfully migrated (via -EIO), and can take whatever steps it deems necessary - attempt rollback, determine which exact page(s) are violating the policy, etc. Make queue_pages_range() return 1 to indicate there are unmovable pages or vma is not migratable. The #2 is not handled correctly in the current kernel, the following patch will fix it. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-2-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ralph Campbell authored
commit 1de13ee5 upstream. When migrating an anonymous private page to a ZONE_DEVICE private page, the source page->mapping and page->index fields are copied to the destination ZONE_DEVICE struct page and the page_mapcount() is increased. This is so rmap_walk() can be used to unmap and migrate the page back to system memory. However, try_to_unmap_one() computes the subpage pointer from a swap pte which computes an invalid page pointer and a kernel panic results such as: BUG: unable to handle page fault for address: ffffea1fffffffc8 Currently, only single pages can be migrated to device private memory so no subpage computation is needed and it can be set to "page". [rcampbell@nvidia.com: add comment] Link: http://lkml.kernel.org/r/20190724232700.23327-4-rcampbell@nvidia.com Link: http://lkml.kernel.org/r/20190719192955.30462-4-rcampbell@nvidia.com Fixes: a5430dda ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
NeilBrown authored
commit 6a2aeab5 upstream. If you use lseek or similar (e.g. pread) to access a location in a seq_file file that is within a record, rather than at a record boundary, then the first read will return the remainder of the record, and the second read will return the whole of that same record (instead of the next record). When seeking to a record boundary, the next record is correctly returned. This bug was introduced by a recent patch (identified below). Before that patch, seq_read() would increment m->index when the last of the buffer was returned (m->count == 0). After that patch, we rely on ->next to increment m->index after filling the buffer - but there was one place where that didn't happen. Link: https://lkml.kernel.org/lkml/877e7xl029.fsf@notabene.neil.brown.name/ Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by:
NeilBrown <neilb@suse.com> Reported-by:
Sergei Turchanov <turchanov@farpost.com> Tested-by:
-
Gustavo A. R. Silva authored
commit 1ee1119d upstream. Add missing break statement in order to prevent the code from falling through to case SH_BREAKPOINT_WRITE. Fixes: 09a07294 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.") Cc: stable@vger.kernel.org Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 16 Aug, 2019 36 commits
-
-
Greg Kroah-Hartman authored
-
Luca Coelho authored
commit f5a47fae upstream. We erroneously added a check for FW API version 41 before sending GEO_TX_POWER_LIMIT, but this was already implemented in version 38. Additionally, it was cherry-picked to older versions, namely 17, 26 and 29, so check for those as well. Cc: stable@vger.kernel.org Fixes: eca1e56c ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luca Coelho authored
commit 39bd984c upstream. Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT command, and sending it to the firmware will cause a firmware crash. We allow this via debugfs, so we need to return an error value in case it's not supported. This had already been fixed during init, when we send the command if the ACPI WGDS table is present. Fix it also for the other, userspace-triggered case. Cc: stable@vger.kernel.org Fixes: 7fe90e0e ("iwlwifi: mvm: refactor geo init") Signed-off-by:
-
Emmanuel Grumbach authored
commit ba3224db upstream. The index for the elements of the ACPI object we dereference was static. This means that if we called the function twice we wouldn't start from 3 again, but rather from the latest index we reached in the previous call. This was dutifully reported by KASAN. Fix this. Cc: stable@vger.kernel.org Fixes: 69964905 ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 87e7e25a upstream. In order to remember how to unmap a memory (as single or as page), we maintain a bit per Transmit Buffer (TBs) in the meta data (structure iwl_cmd_meta). We maintain a bitmap: 1 bit per TB. If the TB is set, we will free the memory as a page. This bitmap was never cleared. Fix this. Cc: stable@vger.kernel.org Fixes: 3cd1980b ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by:
-
Brian Norris authored
commit df612421 upstream. Commit 63d7ef36 ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36 breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36 ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: <stable@vger.kernel.org> Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Wanpeng Li authored
commit 17e433b5 upstream. After commit d73eb57b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a146 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 09a54f0e upstream. If the user specifies an open mode of 3, then we don't have a NFSv4 state attached to the context, and so we Oops when we try to dereference it. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Fixes: 29b59f94 ("NFSv4: change nfs4_do_setattr to take...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.10: 991eedb1: NFSv4: Only pass the... Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
-
Steve French authored
commit 8d33096a upstream. We had a report of a server which did not do a DFS referral because the session setup Capabilities field was set to 0 (unlike negotiate protocol where we set CAP_DFS). Better to send it session setup in the capabilities as well (this also more closely matches Windows client behavior). Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit e99c63e4 upstream. Currently we skip SMB2_TREE_CONNECT command when checking during reconnect because Tree Connect happens when establishing an SMB session. For SMB 3.0 protocol version the code also calls validate negotiate which results in SMB2_IOCL command being sent over the wire. This may deadlock on trying to acquire a mutex when checking for reconnect. Fix this by skipping SMB2_IOCL command when doing the reconnect check. Signed-off-by:
-
Vivek Goyal authored
commit d75996dd upstream. Vivek: "As of now dax_layout_busy_page() calls unmap_mapping_range() with last argument as 1, which says even unmap cow pages. I am wondering who needs to get rid of cow pages as well. I noticed one interesting side affect of this. I mount xfs with -o dax and mmaped a file with MAP_PRIVATE and wrote some data to a page which created cow page. Then I called fallocate() on that file to zero a page of file. fallocate() called dax_layout_busy_page() which unmapped cow pages as well and then I tried to read back the data I wrote and what I get is old data from persistent memory. I lost the data I had written. This read basically resulted in new fault and read back the data from persistent memory. This sounds wrong. Are there any users which need to unmap cow pages as well? If not, I am proposing changing it to not unmap cow pages. I noticed this while while writing virtio_fs code where when I tried to reclaim a memory range and that corrupted the executable and I was running from virtio-fs and program got segment violation." Dan: "In fact the unmap_mapping_range() in this path is only to synchronize against get_user_pages_fast() and force it to call back into the filesystem to re-establish the mapping. COW pages should be left untouched by dax_layout_busy_page()." Cc: <stable@vger.kernel.org> Fixes: 5fac7408 ("mm, fs, dax: handle layout changes to pinned dax mappings") Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Brian Norris authored
commit 05aaa5c9 upstream. In a very similar spirit to commit c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit c02f77d3 upstream. A long-time problem on the recent AMD chip (X370, X470, B450, etc with PCI ID 1022:1457) with Realtek codecs is the crackled or distorted sound for capture streams, as well as occasional playback hiccups. After lengthy debugging sessions, the workarounds we've found are like the following: - Set up the proper driver caps for this controller, similar as the other AMD controller. - Correct the DMA position reporting with the fixed FIFO size, which is similar like as workaround used for VIA chip set. - Even after the position correction, PulseAudio still shows mysterious stalls of playback streams when a capture is triggered in timer-scheduled mode. Since we have no clear way to eliminate the stall, pass the BATCH PCM flag for PA to suppress the tsched mode as a temporary workaround. This patch implements the workarounds. For the driver caps, it defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO- corrected position reporting (corresponding to the new position_fix=6) and enforces the SNDRV_PCM_INFO_BATCH flag. Note that the current implementation is merely a workaround. Hopefully we'll find a better alternative in future, especially about removing the BATCH flag hack again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c1c6c877 upstream. The commit bfcba288 ("ALSA - hda: Add support for link audio time reporting") introduced the conditional PCM hw info setup, but it overwrites the global azx_pcm_hw object. This will cause a problem if any other HD-audio controller, as it'll inherit the same bit flag although another controller doesn't support that feature. Fix the bug by setting the PCM hw info flag locally. Fixes: bfcba288 ("ALSA - hda: Add support for link audio time reporting") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Wenwen Wang authored
commit 3d92aa45 upstream. In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and 'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs. Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails. To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'. Fixes: a91c3fb2 ("Add M2Tech hiFace USB-SPDIF driver") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Wenwen Wang authored
commit 1be3c1fa upstream. In iso_packets_buffer_init(), 'b->packets' is allocated through kmalloc_array(). Then, the aligned packet size is checked. If it is larger than PAGE_SIZE, -EINVAL will be returned to indicate the error. However, the allocated 'b->packets' is not deallocated on this path, leading to a memory leak. To fix the above issue, free 'b->packets' before returning the error code. Fixes: 31ef9134 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v2.6.39+ Signed-off-by:
-
Stanislav Lisovskiy authored
commit 73a0ff0b upstream. According to Bspec clock divisor registers in GeminiLake should be initialized by shifting 1(<<) to amount of correspondent divisor. While i915 was writing all this time that value as is. Surprisingly that it by accident worked, until we met some issues with Microtech Etab. v2: Added Fixes tag and cc v3: Added stable to cc as well. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826 Fixes: bcc65700 ("drm/i915/glk: Program txesc clock divider for GLK") Cc: Deepak M <m.deepak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com (cherry picked from commit ce52ad5d) Signed-off-by:
-
Guenter Roeck authored
commit 38ada2f4 upstream. The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by:
Gilles Buloz <Gilles.Buloz@kontron.com> Cc: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: stable@vger.kernel.org Fixes: 3434f378 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by:
-
Tomas Bortoli authored
commit 30a8beeb upstream. Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com Fixes: 0a25e1f4 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Tomas Bortoli authored
commit ead16e53 upstream. Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by:
-
Wenwen Wang authored
commit a6706020 upstream. In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is allocated through kzalloc() before the execution goto 'found_clock'. However, this structure is not deallocated if the memory allocation for 'pd' fails, leading to a memory leak bug. To fix the above issue, free 'fp->chmap' before returning NULL. Fixes: 7edf3b5e ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by:
-
Nick Desaulniers authored
commit 4ce97317 upstream. Implementing memcpy and memset in terms of __builtin_memcpy and __builtin_memset is problematic. GCC at -O2 will replace calls to the builtins with calls to memcpy and memset (but will generate an inline implementation at -Os). Clang will replace the builtins with these calls regardless of optimization level. $ llvm-objdump -dr arch/x86/purgatory/string.o | tail 0000000000000339 memcpy: 339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 000000000000033b: R_X86_64_64 memcpy 343: ff e0 jmpq *%rax 0000000000000345 memset: 345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 0000000000000347: R_X86_64_64 memset 34f: ff e0 Such code results in infinite recursion at runtime. This is observed when doing kexec. Instead, reuse an implementation from arch/x86/boot/compressed/string.c. This requires to implement a stub function for warn(). Also, Clang may lower memcmp's that compare against 0 to bcmp's, so add a small definition, too. See also: commit 5f074f3e ("lib/string.c: implement a basic bcmp") Fixes: 8fc5b4d4 ("purgatory: core purgatory functionality") Reported-by:
Vaibhav Rustagi <vaibhavrustagi@google.com> Debugged-by:
Manoj Gupta <manojgupta@google.com> Suggested-by:
Alistair Delva <adelva@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Roderick Colenbrander authored
commit e0f6974a upstream. Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4 gamepad while rumble is enabled. This issue is reproducible with a frequency of 1 in 3 times in the game Borderlands 2 when using an automatic weapon, which triggers many rumble operations. We found the issue to be a race condition between sony_remove and the final device destruction by the HID / input system. The problem was that sony_remove didn't clean some of its work_item state in "struct sony_sc". After sony_remove work, the corresponding evdev node was around for sufficient time for applications to still queue rumble work after "sony_remove". On pre-4.19 kernels the race condition caused a kernel crash due to a NULL-pointer dereference as "sc->output_report_dmabuf" got freed during sony_remove. On newer kernels this crash doesn't happen due the buffer now being allocated using devm_kzalloc. However we can still queue work, while the driver is an undefined state. This patch fixes the described problem, by guarding the work_item "state_worker" with an initialized variable, which we are setting back to 0 on cleanup. Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Halil Pasic authored
[ Upstream commit 1a2dcff8 ] On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits. The current value is 24 and makes __dma_direct_alloc_pages() take a wrong turn first (but __dma_direct_alloc_pages() recovers then). Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reported-by:
Petr Tesarik <ptesarik@suse.cz> Fixes: c61e9637 ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Leonard Crestez authored
[ Upstream commit 4ce54af8 ] Some hardware PMU drivers will override perf_event.cpu inside their event_init callback. This causes a lockdep splat when initialized through the kernel API: WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208 pc : ctx_sched_out+0x78/0x208 Call trace: ctx_sched_out+0x78/0x208 __perf_install_in_context+0x160/0x248 remote_function+0x58/0x68 generic_exec_single+0x100/0x180 smp_call_function_single+0x174/0x1b8 perf_install_in_context+0x178/0x188 perf_event_create_kernel_counter+0x118/0x160 Fix this by calling perf_install_in_context with event->cpu, just like perf_event_open Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Li <Frank.li@nxp.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 952041a8 ] While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of a bug we just found for rwsem. X = 0; CPU0 CPU1 rwsem_down_read() for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); X = 1; rwsem_up_write(); rwsem_mark_wake() atomic_long_add(adjustment, &sem->count); smp_store_release(&waiter->task, NULL); if (!waiter.task) break; ... } r = X; Allows 'r == 0'. Reported-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit d4fddac5 ] In test_firmware_init(), the buffer pointed to by the global pointer 'test_fw_config' is allocated through kzalloc(). Then, the buffer is initialized in __test_firmware_config_init(). In the case that the initialization fails, the following execution in test_firmware_init() needs to be terminated with an error code returned to indicate this failure. However, the allocated buffer is not freed on this execution path, leading to a memory leak bug. To fix the above issue, free the allocated buffer before returning from test_firmware_init(). Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 20122994 ] Retrying immediately after we've received a 'transitioning' sense code is pretty much pointless, we should always use a delay before retrying. So ensure the default delay is applied before retrying. Signed-off-by:
Hannes Reinecke <hare@suse.com> Tested-by:
Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 5578257c ] While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit 3b5f307e ] While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 3a9d2569 ] The mdio-bus-mux has no #address-cells/#size-cells property, which causes a few dtc warnings: arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value Add the normal cell numbers. Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de Fixes: 2bebdfcd ("ARM: dts: BCM5301X: Add support for Linksys EA9500") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit d64b212e ] When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.deAcked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Marta Rybczynska authored
[ Upstream commit 66b20ac0 ] Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by:
Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by:
Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Lorenzo Pieralisi authored
[ Upstream commit 5a46d3f7 ] Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd2 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/Reviewed-by:
Hanjun Guo <guohanjun@huawei.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 77ce56e2 ] Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit d95daf5a ] When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
