This patch corrects author and copyright notices  following the split-up of
the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

It's possible that the platform is not allowing reboot via TCO timer
expiration.

Also, differentiate between not finding a chipset that has TCO, and the case
where TCO is present but the driver fails to initialize for some reason.
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Clean-up driver:
* make release the reverse of probe so that both are consistent
* add WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS ioctls.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This driver adds support for the max63{69,70,71,72,73,74} family of
watchdog timer chips.

It has been tested on an Arcom Zeus (max6369).
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Technologic Systems TS-72xx SBCs have external glue logic
CPLD which includes watchdog timer. This driver implements
kernel support for that.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Fix per-cpu merge conflict
  failslab: add ability to filter slab caches
  slab: fix regression in touched logic
  dma kmalloc handling fixes
  slub: remove impossible condition
  slab: initialize unused alien cache entry as NULL at alloc_alien_cache().
  SLUB: Make slub statistics use this_cpu_inc
  SLUB: this_cpu: Remove slub kmem_cache fields
  SLUB: Get rid of dynamic DMA kmalloc cache allocation
  SLUB: Use this_cpu operations in slub

* 'nfs-for-2.6.34' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (44 commits)
  NFS: Remove requirement for inode->i_mutex from nfs_invalidate_mapping
  NFS: Clean up nfs_sync_mapping
  NFS: Simplify nfs_wb_page()
  NFS: Replace __nfs_write_mapping with sync_inode()
  NFS: Simplify nfs_wb_page_cancel()
  NFS: Ensure inode is always marked I_DIRTY_DATASYNC, if it has unstable pages
  NFS: Run COMMIT as an asynchronous RPC call when wbc->for_background is set
  NFS: Reduce the number of unnecessary COMMIT calls
  NFS: Add a count of the number of unstable writes carried by an inode
  NFS: Cleanup - move nfs_write_inode() into fs/nfs/write.c
  nfs41 fix NFS4ERR_CLID_INUSE for exchange id
  NFS: Fix an allocation-under-spinlock bug
  SUNRPC: Handle EINVAL error returns from the TCP connect operation
  NFSv4.1: Various fixes to the sequence flag error handling
  nfs4: renewd renew operations should take/put a client reference
  nfs41: renewd sequence operations should take/put client reference
  nfs: prevent backlogging of renewd requests
  nfs: kill renewd before clearing client minor version
  NFS: Make close(2) asynchronous when closing NFS O_DIRECT files
  NFS: Improve NFS iostat byte count accuracy for writes
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Add hardlink support to .u extension
  9P2010.L handshake: .L protocol negotiation
  9P2010.L handshake: Remove "dotu" variable
  9P2010.L handshake: Add mount option
  9P2010.L handshake: Add VFS flags
  net/9p: Handle mount errors correctly.
  net/9p: Remove MAX_9P_CHAN limit
  net/9p: Add multi channel support.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c

* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (145 commits)
  KVM: x86: Add KVM_CAP_X86_ROBUST_SINGLESTEP
  KVM: VMX: Update instruction length on intercepted BP
  KVM: Fix emulate_sys[call, enter, exit]()'s fault handling
  KVM: Fix segment descriptor loading
  KVM: Fix load_guest_segment_descriptor() to inject page fault
  KVM: x86 emulator: Forbid modifying CS segment register by mov instruction
  KVM: Convert kvm->requests_lock to raw_spinlock_t
  KVM: Convert i8254/i8259 locks to raw_spinlocks
  KVM: x86 emulator: disallow opcode 82 in 64-bit mode
  KVM: x86 emulator: code style cleanup
  KVM: Plan obsolescence of kernel allocated slots, paravirt mmu
  KVM: x86 emulator: Add LOCK prefix validity checking
  KVM: x86 emulator: Check CPL level during privilege instruction emulation
  KVM: x86 emulator: Fix popf emulation
  KVM: x86 emulator: Check IOPL level during io instruction emulation
  KVM: x86 emulator: fix memory access during x86 emulation
  KVM: x86 emulator: Add Virtual-8086 mode of emulation
  KVM: x86 emulator: Add group9 instruction decoding
  KVM: x86 emulator: Add group8 instruction decoding
  KVM: do not store wqh in irqfd
  ...

Trivial conflicts in Documentation/feature-removal-schedule.txt

For regular file and directories we put the link
count in th extension field in a tagged string format.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This patch adds 9P2010.L protocol negotiation with the server
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Removes 'dotu' variable and make everything dependent
on 'proto_version' field.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Add new mount V9FS mount option to specify protocol version

This patch adds a new mount option to specify protocol version.
With this option it is possible to use "-o version=" switch to
specify 9P protocol version to use. Valid options for version
are:
9p2000
9p2000.u
9p2010.L
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Add 9P2000.u and 9P2010.L protocol flags to V9FS VFS

This patch adds 9P2000.u and 9P2010.L protocol flags into V9FS VFS side code
and removes the single flag used for 'extended'.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

With this patch we have

# mount -t 9p -o trans=virtio virtio2 /mnt/
# mount -t 9p -o trans=virtio virtio2 /mnt/
mount: virtio2 already mounted or /mnt/ busy
mount: according to mtab, virtio2 is already mounted on /mnt
# mount -t 9p -o trans=virtio virtio3 /mnt/ -o debug=0xfff
mount: special device virtio3 does not exist
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Use a list to track the channel instead of statically
allocated array
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This is needed for supporting multiple mount points.

We can find out the device names to be used with mount by checking

/sys/devices/virtio-pci/virtio*/device file

if the device file have value 9 then the specific virtio device can
be used for mounting.

ex:
 #cat /sys/devices/virtio-pci/virtio1/device
 9

now we can mount using
# mount -t 9p -o trans=virtio virtio1  /mnt/
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Remove the redundant call to filemap_write_and_wait().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Now that we have correct COMMIT semantics in writeback_single_inode, we can
reduce and simplify nfs_wb_all(). Also replace nfs_wb_nocommit() with a
call to filemap_write_and_wait(), which doesn't need to hold the
inode->i_mutex.

With that done, we can eliminate nfs_write_mapping() altogether.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In all cases we should be able to just remove the request and call
cancel_dirty_page().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Since nfs_scan_list() doesn't wait for locked pages, we have a race in
which it is possible to end up with an inode that needs to send a COMMIT,
but which does not have the I_DIRTY_DATASYNC flag set.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>

If the caller is doing a non-blocking flush, and there are still writebacks
pending on the wire, we can usually defer the COMMIT call until those
writes are done.

Also ensure that we honour the wbc->nonblocking flag.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In order to know when we should do opportunistic commits of the unstable
writes, when the VM is doing a background flush, we add a field to count
the number of unstable writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The sole purpose of nfs_write_inode is to commit unstable writes, so
move it into fs/nfs/write.c, and make nfs_commit_inode static.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

* 'write_inode2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  pass writeback_control to ->write_inode
  make sure data is on disk before calling ->write_inode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Switch !O_CREAT case to use of do_last()
  Get rid of symlink body copying
  Finish pulling of -ESTALE handling to upper level in do_filp_open()
  Turn do_link spaghetty into a normal loop
  Unify exits in O_CREAT handling
  Kill is_link argument of do_last()
  Pull handling of LAST_BIND into do_last(), clean up ok: part in do_filp_open()
  Leave mangled flag only for setting nd.intent.open.flag
  Get rid of passing mangled flag to do_last()
  Don't pass mangled open_flag to finish_open()
  pull more into do_last()
  bail out with ELOOP earlier in do_link loop
  pull the common predecessors into do_last()
  postpone __putname() until after do_last()
  unroll do_last: loop in do_filp_open()
  Shift releasing nd->root from do_last() to its caller
  gut do_filp_open() a bit more (do_last separation)
  beginning to untangle do_filp_open()

Fix missing kernel-doc notation in mtrr/main.c:

Warning(arch/x86/kernel/cpu/mtrr/main.c:152): No description found for parameter 'info'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Issue at least one memory barrier in stop_machine_text_poke()
  perf probe: Correct probe syntax on command line help
  perf probe: Add lazy line matching support
  perf probe: Show more lines after last line
  perf probe: Check function address range strictly in line finder
  perf probe: Use libdw callback routines
  perf probe: Use elfutils-libdw for analyzing debuginfo
  perf probe: Rename probe finder functions
  perf probe: Fix bugs in line range finder
  perf probe: Update perf probe document
  perf probe: Do not show --line option without dwarf support
  kprobes: Add documents of jump optimization
  kprobes/x86: Support kprobes jump optimization on x86
  x86: Add text_poke_smp for SMP cross modifying code
  kprobes/x86: Cleanup save/restore registers
  kprobes/x86: Boost probes when reentering
  kprobes: Jump optimization sysctl interface
  kprobes: Introduce kprobes jump optimization
  kprobes: Introduce generic insn_slot framework
  kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  padata: Allocate the cpumask for the padata instance
  crypto: authenc - Move saved IV in front of the ablkcipher request
  crypto: hash - Fix handling of unaligned buffers
  crypto: authenc - Use correct ahash complete functions
  crypto: md5 - Set statesize

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (36 commits)
  ext4: fix up rb_root initializations to use RB_ROOT
  ext4: Code cleanup for EXT4_IOC_MOVE_EXT ioctl
  ext4: Fix the NULL reference in double_down_write_data_sem()
  ext4: Fix insertion point of extent in mext_insert_across_blocks()
  ext4: consolidate in_range() definitions
  ext4: cleanup to use ext4_grp_offs_to_block()
  ext4: cleanup to use ext4_group_first_block_no()
  ext4: Release page references acquired in ext4_da_block_invalidatepages
  ext4: Fix ext4_quota_write cross block boundary behaviour
  ext4: Convert BUG_ON checks to use ext4_error() instead
  ext4: Use direct_IO_no_locking in ext4 dio read
  ext4: use ext4_get_block_write in buffer write
  ext4: mechanical rename some of the direct I/O get_block's identifiers
  ext4: make "offset" consistent in ext4_check_dir_entry()
  ext4: Handle non empty on-disk orphan link
  ext4: explicitly remove inode from orphan list after failed direct io
  ext4: fix error handling in migrate
  ext4: deprecate obsoleted mount options
  ext4: Fix fencepost error in chosing choosing group vs file preallocation.
  jbd2: clean up an assertion in jbd2_journal_commit_transaction()
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: get rid of obsolete definition in header file
  Squashfs: get rid of obsolete variable in struct squashfs_sb_info
  Squashfs: add decompressor entries for lzma and lzo
  Squashfs: add a decompressor framework
  Squashfs: factor out remaining zlib dependencies into separate wrapper file
  Squashfs: move zlib decompression wrapper code into a separate file

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Similar to the fsync issue fixed a while ago in commit
2daea67e we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path.  Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.

Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>