- 30 Apr, 2018 40 commits
-
-
Petr Machata authored
Since switchdev events can trigger SPAN respin, it is necessary that the data structures are available. Register SPAN first, with a commentary on what the dependencies are. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Publish the existing function mlxsw_sp_bridge_port_find(), and add another service accessor mlxsw_sp_bridge_port_stp_state(). Publish both in a new file spectrum_switchdev.h. Signed-off-by:
-
Petr Machata authored
Instead of duplicating the decision regarding port forwarding state made by mlxsw_sp_port_vid_stp_set(), extract the decision-making into a new function and reuse. Signed-off-by:
-
Petr Machata authored
Add a couple new functions to allow querying FDB and vlan settings of a bridge. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ahmed Abdelsalam authored
The seg6_make_flowlabel() is used by seg6_do_srh_encap() to compute the flowlabel from a given skb. It relies on skb_get_hash() which eventually calls __skb_flow_dissect() to extract the flow_keys struct values from the skb. In case of IPv4 traffic, calling seg6_make_flowlabel() after skb_push(), skb_reset_network_header(), and skb_mac_header_rebuild() will results in flow_keys struct of all key values set to zero. This patch calls seg6_make_flowlabel() before resetting the headers of skb to get the right key values. Extracted Key values are based on the type inner packet as follows: 1) IPv6 traffic: src_IP, dst_IP, L4 proto, and flowlabel of inner packet. 2) IPv4 traffic: src_IP, dst_IP, L4 proto, src_port, and dst_port 3) L2 traffic: depends on what kind of traffic carried into the L2 frame. IPv6 and IPv4 traffic works as discussed 1) and 2) Here a hex_dump of struct flow_keys for IPv4 and IPv6 traffic 10.100.1.100: 47302 > 30.0.0.2: 5001 00000000: 14 00 02 00 00 00 00 00 08 00 11 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 13 89 b8 c6 1e 00 00 02 00000020: 0a 64 01 64 fc00:a1:a > b2::2 00000000: 28 00 03 00 00 00 00 00 86 dd 11 00 99 f9 02 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 02 fc 00 00 a1 00000030: 00 00 00 00 00 00 00 00 00 00 00 0a Signed-off-by:
Ahmed Abdelsalam <amsalam20@gmail.com> Signed-off-by:
-
YueHaibing authored
use helper __skb_put_zero to replace the pattern of __skb_put() && memset() Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
William Tu authored
Currently the truncated bit is set only when the mirrored packet is larger than mtu. For certain cases, the packet might already been truncated before sending to the erspan tunnel. In this case, the patch detect whether the IP header's total length is larger than the actual skb->len. If true, this indicated that the mirrored packet is truncated and set the erspan truncate bit. I tested the patch using bpf_skb_change_tail helper function to shrink the packet size and send to erspan tunnel. Reported-by:
Xiaoyan Jin <xiaoyanj@vmware.com> Signed-off-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: further improvements w/o functional change This series aims at further improving and simplifying the code w/o any intended functional changes. Series was tested on: RTL8169sb, RTL8168d, RTL8168e-vl ==================== Signed-off-by: -
Heiner Kallweit authored
The chip-specific init code includes quite some calls which are identical for all chips. So move these calls to tp->hw_start(). In addition move rtl_set_rx_max_size() a little to make sure it's defined before it's used. Unfortunately the diff generated by git is a little bit hard to read. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
__dev_open() calls the ndo_set_rx_mode callback anyway, so we don't have to do it here too. Signed-off-by:
-
Heiner Kallweit authored
Currently done: - if mac_version in (01, 02, 03, 04) RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb); - if mac_version in (01, 02, 03, 04) rtl_set_rx_tx_config_registers(tp); - if mac_version not in (01, 02, 03, 04) RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb); rtl_set_rx_tx_config_registers(tp); So we do exactly the same independent of chip version and can simplify the code. In addition remove the call to rtl_init_rxcfg(), it's called in rtl_init_one() already and the set bits are never touched later. rtl_init_8168/8101 don't include this call either. Signed-off-by:
-
Heiner Kallweit authored
Both quirk masks are the same, so we can merge them. The quirk mask includes most bits so it's actually easier to define a mask with the bits to keep. Signed-off-by:
-
Heiner Kallweit authored
tp->cp_cmd is supposed to reflect the current value of the CplusCmd register. Several (quite old) changes however directly change this register w/o updating tp->cp_cmd. Also we have places in the code reading this register where we could use the cached value. In addition: - Properly initialize tp->cmd with the register value. - In rtl_hw_start_8169 remove one setting of PCIMulRW because it's set unconditionally anyway a few lines later. - In rtl_hw_start_8168 properly mask out the INTT bits before setting INTT_1. So far we rely on both bits being zero. Signed-off-by:
-
Heiner Kallweit authored
Use a proper constant for INTT bit mask. Signed-off-by:
-
Heiner Kallweit authored
__rtl8169_set_features is used in rtl8169_set_features only, so we can inline it. In addition: - Remove check (features ^ dev->features), __netdev_update_features check's already that requested features differ from current ones. - Don't mask out unsupported flags, there's no benefit in it. Signed-off-by:
-
Heiner Kallweit authored
RxChkSum and RxVlan aren't touched outside __rtl8169_set_features (except in probe), so they are always in sync with dev->features. And the RxConfig flags are set in rtl_set_rx_mode() which is called via dev_set_rx_mode() from __dev_open(). Therefore we can safely remove this call. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in oct_stats_strings text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Intiyaz Basha says: ==================== liquidio: enhanced ethtool --set-channels feature For the ethtool --set-channels feature, the liquidio driver currently accepts max combined value as the queue count configured during driver load time, where max combined count is the total count of input and output queues. This limitation is applicable only when SR-IOV is enabled, that is, when VFs are created for PF. If SR-IOV is not enabled, the driver can configure max supported (64) queues. This series of patches are for enhancing driver to accept max supported queues for ethtool --set-channels. Changes in V2: Only patch #6 was changed to fix these Sparse warnings reported by kbuild test robot: lio_ethtool.c:848:5: warning: symbol 'lio_23xx_reconfigure_queue_count' was not declared. Should it be static? lio_ethtool.c:877:22: warning: incorrect type in assignment (different base types) lio_ethtool.c:878:22: warning: incorrect type in assignment (different base types) lio_ethtool.c:879:22: warning: incorrect type in assignment (different base types) ==================== Signed-off-by: -
Intiyaz Basha authored
Enhancing driver to accept max supported queues for ethtool --set-channels Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Intiyaz Basha authored
Moved common function setup_glists to lio_core.c and reamed it to lio_setup_glists Signed-off-by:
-
Intiyaz Basha authored
Moving common definition octnic_gather to octeon_network.h Signed-off-by:
-
Intiyaz Basha authored
Moved common function delete_glists to lio_core.c and renamed it to lio_delete_glists Signed-off-by:
-
Intiyaz Basha authored
Moved common function list_delete_head to octeon_network.h and renamed it to lio_list_delete_head Signed-off-by:
-
Intiyaz Basha authored
Moved common function if_cfg_callback to lio_core.c and renamed it to lio_if_cfg_callback. Signed-off-by:
-
Florian Fainelli authored
We have about 53 netdev_features_t bits defined and counting, add a build time check to catch when an u64 type will not be enough and we will have to convert that to a bitmap. This is done in register_netdevice() for convenience. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Alexander Duyck says: ==================== Clean up users of skb_tx_hash and __skb_tx_hash I am in the process of doing some work to try and enable macvlan Tx queue selection without using ndo_select_queue. As a part of that I will likely need to make changes to skb_tx_hash. As such this is a clean up or refactor of the two spots where he function has been used. In both cases it didn't really seem like the function was being used correctly so I have updated both code paths to not make use of the function. My current development environment doesn't have an mlx4 or OPA vnic available so the changes to those have been build tested only. ==================== Signed-off-by: -
Alexander Duyck authored
I am dropping the export of __skb_tx_hash as after my patches nobody is using it outside of the net/core/dev.c file. In addition I am renaming and repurposing it to just be a static declaration of skb_tx_hash since that was the only user for it at this point. By doing this the compiler can inline it into __netdev_pick_tx as that will improve performance. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
The code in the fallback path has supported XDP in conjunction with the Tx traffic classification for TCs for over a year now. So instead of just calling skb_tx_hash for every packet we are better off using the fallback since that will record the Tx queue to the socket and then that can be used instead of having to recompute the hash every time. Signed-off-by:
-
Alexander Duyck authored
This patch is meant to clean up how the opa_vnic is obtaining entropy from Tx packets. The code as it was written was claiming to get 16 bits of hash, but from what I can tell it was only ever actually getting 14 bits as it was limited to 0 - (2^15 - 1). It then was folding the result to get a 8 bit value for entropy. Instead of throwing away all that input I am cutting out the middle man and instead having the code call skb_get_hash directly and then folding the 32 bit value into a 8 bit value using a pair of shifts and XOR operations. Execution wise this new approach should provide more entropy and be faster since we are bypassing the reciprocal multiplication to reduce the 32b value to 16b and instead just using a shift/XOR combination. In addition we can drop the unneeded adapter value from the call to get the entropy since the netdev itself isn't even needed. Signed-off-by:
-
David S. Miller authored
Raghuram Chary J says: ==================== lan78xx updates along with Fixed phy Support These series of patches handle few modifications in driver and adds support for fixed phy. ==================== Signed-off-by: -
Raghuram Chary J authored
Modify the error messages when phy registration fails. Signed-off-by:
Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by:
-
Raghuram Chary J authored
Remove driver version info from the lan78xx driver. Signed-off-by:
-
Raghuram Chary J authored
Adding Fixed PHY support to the lan78xx driver. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: mmap: rework zerocopy receive syzbot reported a lockdep issue caused by tcp mmap() support. I implemented Andy Lutomirski nice suggestions to resolve the issue and increase scalability as well. First patch is adding a new getsockopt() operation and changes mmap() behavior. Second patch changes tcp_mmap reference program. v4: tcp mmap() support depends on CONFIG_MMU, as kbuild bot told us. v3: change TCP_ZEROCOPY_RECEIVE to be a getsockopt() option instead of setsockopt(), feedback from Ka-Cheon Poon v2: Added a missing page align of zc->length in tcp_zerocopy_receive() Properly clear zc->recv_skip_hint in case user request was completed. ==================== Signed-off-by: -
Eric Dumazet authored
After prior kernel change, mmap() on TCP socket only reserves VMA. We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) to perform the transfert of pages from skbs in TCP receive queue into such VMA. struct tcp_zerocopy_receive { __u64 address; /* in: address of mapping */ __u32 length; /* in/out: number of bytes to map/mapped */ __u32 recv_skip_hint; /* out: amount of bytes to skip */ }; After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains number of bytes that were mapped, and @recv_skip_hint contains number of bytes that should be read using conventional read()/recv()/recvmsg() system calls, to skip a sequence of bytes that can not be mapped, because not properly page aligned. Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Andy Lutomirski <luto@kernel.org> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
When adding tcp mmap() implementation, I forgot that socket lock had to be taken before current->mm->mmap_sem. syzbot eventually caught the bug. Since we can not lock the socket in tcp mmap() handler we have to split the operation in two phases. 1) mmap() on a tcp socket simply reserves VMA space, and nothing else. This operation does not involve any TCP locking. 2) getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) implements the transfert of pages from skbs to one VMA. This operation only uses down_read(¤t->mm->mmap_sem) after holding TCP lock, thus solving the lockdep issue. This new implementation was suggested by Andy Lutomirski with great details. Benefits are : - Better scalability, in case multiple threads reuse VMAS (without mmap()/munmap() calls) since mmap_sem wont be write locked. - Better error recovery. The previous mmap() model had to provide the expected size of the mapping. If for some reason one part could not be mapped (partial MSS), the whole operation had to be aborted. With the tcp_zerocopy_receive struct, kernel can report how many bytes were successfuly mapped, and how many bytes should be read to skip the problematic sequence. - No more memory allocation to hold an array of page pointers. 16 MB mappings needed 32 KB for this array, potentially using vmalloc() :/ - skbs are freed while mmap_sem has been released Following patch makes the change in tcp_mmap tool to demonstrate one possible use of mmap() and setsockopt(... TCP_ZEROCOPY_RECEIVE ...) Note that memcg might require additional changes. Fixes: 93ab6cc6 ("tcp: implement mmap() for zero copy receive") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Suggested-by:
Andy Lutomirski <luto@kernel.org> Cc: linux-mm@kvack.org Acked-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: remove Global 2 setup Parts of the mv88e6xxx driver still write arbitrary registers of different banks at setup time, which is misleading especially when supporting multiple device models. This patchset moves two features setup into the top lovel mv88e6xxx_setup function and kills the old Global 2 register bank setup function. It brings no functional changes. ==================== Signed-off-by: -
Vivien Didelot authored
The remaining values written to the Switch Management Register in the mv88e6xxx_g2_setup function are specific to 88E6352 and older, and are the default values anyway. Thus remove completely this function. The mv88e6xxx driver no more contains setup code to access arbitrary Global 2 registers. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Move the Device Mapping setup out of the specific Global 2 code, into the top level device setup function. Signed-off-by:
-
Vivien Didelot authored
Move the trunking setup out of Global 2 specific setup into the top level mv88e6xxx_setup function. Note that the 88E6390 family calls this LAG instead of Trunk and supports 32 possible ID routing vectors, with LAG ID bit 4 being placed in Global 2 register 0x1D... We don't need Trunk (or LAG) IDs for the moment, thus keep it simple. Signed-off-by:
-
