- 24 Jul, 2023 17 commits
-
-
Thomas Zimmermann authored
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-13-tzimmermann@suse.de
-
Thomas Zimmermann authored
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by kzalloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Bruno Prémont <bonbons@linux-vserver.org> Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-11-tzimmermann@suse.de
-
Thomas Zimmermann authored
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
Miguel Ojeda <ojeda@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Robin van der Gracht <robin@protonic.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Assign FB_MODE_IS_UNKNOWN to sh7763fb_videomode.flag instead of FBINFO_FLAG_DEFAULT. Both are 0, so the stored value does not change. FBINFO_FLAG_DEFAULT is a flag for a framebuffer in struct fb_info. Flags for videomodes are prefixed with FB_MODE_. v3: * include board name in commit message (Adrian) v2: * assign FB_MODE_IS_UNKNOWN (Adrian) Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by dmam_alloc_coherent(__GFP_ZERO). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v4: * clarify commit message (Geert, Dan) v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by devm_kzalloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v4: * clarify commit message (Geert, Dan) v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by kzalloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v4: * clarify commit message (Geert, Dan) v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by a static declaration. So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v4: * clarify commit message (Geert, Dan) v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to get v6.5-rc2. Signed-off-by: -
Dan Carpenter authored
This code is not using the correct gfp flags which were passed in. However, this does not affect runtime because kstrdup_const() is a no-op in this context. (It just returns the "kmalloc" string literal without doing an allocation.) Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ddf86b59-696a-45f0-96dd-b87aa7b9ab2e@moroto.mountain
-
Pin-yen Lin authored
These two drivers embed a i2c_client in their private driver data, but only strict device is actually needed. Replace the i2c_client reference with a struct device one. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230718110407.1005200-1-wenst@chromium.org
-
Pin-yen Lin authored
Replace the spaces with tab characters in the Kconfig file. Signed-off-by:
-
Chen-Yu Tsai authored
The device lock is used to serialize the low level power sequencing operations. Since drm_helper_hpd_irq_event() could end up calling .atomic_enable, which also calls power sequencing functions through runtime PM, this results in a real deadlock. This was observed on an MT8192-based Chromebook's external display (with appropriate patches [1] and DT changes applied). Move the drm_helper_hpd_irq_event() call outside of the lock range. The lock only needs to be held so that the device status can be read back. This is the bare minimum change to avoid the deadlock. The lock could be dropped completely and have pm_runtime_get_if_in_use() increase the reference count, but this is not the same as pm_runtime_suspended(). Dropping the lock completely also causes the internal display of the same device to not function correctly if the internal bridge's interrupt line is added in the device tree. Both the internal and external display of said device each use one anx7625 bridge. [1] https://lore.kernel.org/dri-devel/20230112042104.4107253-1-treapking@chromium.org/ Fixes: 60487584 ("drm/bridge: anx7625: refactor power control to use runtime PM framework") Signed-off-by:
-
- 22 Jul, 2023 4 commits
-
-
Javier Martinez Canillas authored
Now that fbdev core has been split in FB_CORE and FB, make the DRM symbol to select the FB_CORE option if the DRM fbdev emulation layer is enabled. This allows to disable the CONFIG_FB option if is not needed, which will avoid the need to explicitly disable each of the legacy fbdev drivers. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-5-javierm@redhat.com
-
Javier Martinez Canillas authored
Currently the CONFIG_FB option has to be enabled even if no legacy fbdev drivers are needed (e.g: only to have support for framebuffer consoles). The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB and so it can only be enabled if that dependency is enabled as well. That means fbdev drivers have to be explicitly disabled if users want to enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer. This patch introduces a non-visible CONFIG_FB_CORE symbol that could be enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION, allowing CONFIG_FB to be disabled (and automatically disabling all the fbdev drivers). Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation layer so these two objects can be compiled out when CONFIG_FB is disabled. Signed-off-by:
-
Javier Martinez Canillas authored
The drivers/video/fbdev/Kconfig defines both symbols for fbdev drivers and core fbdev symbols, that can be enabled independently of the fbdev drivers. Split the Kconfig in two, one that only has the symbols for fbdev drivers and another one that contains the fbdev core symbols. Suggested-by:
-
Javier Martinez Canillas authored
The drivers in this subsystem are for either character-based or monochrome LCD controllers. Which can fall into the same category of the DRM/KMS and fbdev drivers, that are located under the "Graphics support" menu. Add the auxdisplay drivers there as well to have all display drivers under the same menu. Suggested-by:
-
- 21 Jul, 2023 9 commits
-
-
Geert Uytterhoeven authored
The page height must be taken into account only for vertical coordinates and heights, not for horizontal coordinates and widths. Fixes: 179a790a ("drm/ssd130x: Set the page height value in the device info data") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
David Jander authored
The documentation is not clear about how this delay works. Empirical tests have shown that with a VSDELAY of 0, the first scanline is not properly formatted in the output stream when DSI->DP mode is used. The calculation spreadsheets from Toshiba seem to always make this value equal to the HFP + 10 for DSI->DP use-case. For DSI->DPI this value should be > 2 and for DPI->DP it seems to always be 0x64. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de> # TC9595 Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
David Jander authored
The PLL often fails to lock with this delay. The new value was determined by trial and error increasing the delay bit by bit until the error did not occurr anymore even after several tries. Then double that value was taken as the minimum delay to be safe. Signed-off-by:
-
Faiz Abbas authored
The Komeda driver always expects the remote connector node to initialize an encoder. It uses the component aggregator framework which consists of component->bind() calls used to initialize the remote encoder and attach it to the crtc. This makes it incompatible with connector drivers which implement drm_bridge APIs. Remove all component framework calls from the komeda driver and declare and attach an encoder inside komeda_crtc_add(). The remote connector driver has to implement the DRM bridge APIs which can be used to glue the encoder to the remote connector. Since we usually pair this with a component encoder that also implements a drm_bridge, dropping support is not expected to affect users of this driver. Signed-off-by:
Faiz Abbas <faiz.abbas@arm.com> Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com> [small white space fixes flagged by checkpatch.pl] Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com
-
Bogdan Togorean authored
For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register. So depending on ADV model write 0xfb or 0x4a register. Fixes: 2437e7cd ("drm/bridge: adv7533: Initial support for ADV7533") Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by:
Alexandru Ardelean <alex@shruggie.ro> Reviewed-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Steven Price <steven.price@arm.com> Acked-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
-
Miquel Raynal authored
There is apparently no reasons to open-code of_device_uevent() besides: - The helper receives a struct device while we want to use the of_node member of the struct device *parent*. - of_device_uevent() could not be called by modules because of a missing EXPORT_SYMBOL*(). In practice, the former point is not very constraining, just calling of_device_uevent(dev->parent, ...) would have made the trick. The latter point is more an observation rather than a real blocking point because nothing prevented of_uevent() (called by the inline function of_device_uevent()) to be exported to modules. In practice, this helper is now exported, so nothing prevent us from using of_device_uevent() anymore. Let's use the core helper directly instead of open-coding it. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Miquel Raynal authored
The content of of_device_uevent() is currently hardcoded in a driver that can be compiled as a module. Nothing prevents of_device_uevent() to be exported to modules, most of the other helpers in of/device.c actually are. The reason why this helper was not exported is because it has been so far only useful in drivers/base, which is built-in anyway. With the idea of getting rid of the hardcoded implementation of of_device_uevent() in other places in the kernel, let's export it to GPL modules (very much like its cousins in the same file). Signed-off-by:
-
- 20 Jul, 2023 6 commits
-
-
Steven Price authored
Casting a pointer to an integer of a different size generates a warning from the compiler. First cast the pointer to a pointer-sized type to keep the compiler happy. Fixes: 4f66feea ("drm: debugfs: provide infrastructure to dump a DRM GPU VA space") Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
-
Steven Price authored
sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f32 ("drm: manager to keep track of GPUs VA mappings") Reviewed-by:
-
Marek Vasut authored
This has been superseded by RPM in commit 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") and the last user of the non-RPM case has been dropped in commit b6d5ffce ("drm/panel-simple: Non-eDP panels don't need "HPD" handling") whatever is left in this driver is just assigned and never used. Drop the remaining parts. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Simon Ser authored
Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an eventfd from a syncobj. This is useful for Wayland compositors to handle wait-before-submit. Wayland clients can send a timeline point to the compositor before the point has materialized yet, then compositors can wait for the point to materialize via this new IOCTL. The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable because it blocks. Compositors want to integrate the wait with their poll(2)-based event loop. Requirements for new uAPI: - User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262 - IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html v2: - Wait for fence when flags is zero - Improve documentation (Pekka) - Rename IOCTL (Christian) - Fix typo in drm_syncobj_add_eventfd() (Christian) v3: - Link user-space + IGT patches - Add reference from overview docs v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak) Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Daniel Stone <daniel@fooishbar.org> Cc: James Jones <jajones@nvidia.com> Cc: Austin Shafer <ashafer@nvidia.com> Cc: Vitaly Prosyak <vprosyak@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr
-
Danilo Krummrich authored
This commit adds a function to dump a DRM GPU VA space and a macro for drivers to register the struct drm_info_list 'gpuvas' entry. Most likely, most drivers might maintain one DRM GPU VA space per struct drm_file, but there might also be drivers not having a fixed relation between DRM GPU VA spaces and a DRM core infrastructure, hence we need the indirection via the driver iterating it's maintained DRM GPU VA spaces. Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Danilo Krummrich authored
Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Donald Robson <donald.robson@imgtec.com> Suggested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- 17 Jul, 2023 4 commits
-
-
Chen-Yu Tsai authored
The DRM DP code has macros for the DP HDCP capabilities. Use them in the anx7625 driver instead of raw numbers. Fixes: cd1637c7 ("drm/bridge: anx7625: add HDCP support") Suggested-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
-
Chen-Yu Tsai authored
The DRM DP code has macros for the DP power sequencing commands. Use them in the anx7625 driver instead of raw numbers. Fixes: 548b512e ("drm/bridge: anx7625: send DPCD command to downstream") Fixes: 27f26359 ("drm/bridge: anx7625: Set downstream sink into normal status") Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
-
Simon Ser authored
This makes it clearer that the values cannot be changed because they are ABI. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
-
