- 13 Mar, 2019 40 commits
-
-
Greg Kroah-Hartman authored
-
Peter Zijlstra (Intel) authored
commit 400816f6 upstream Skylake (and later) will receive a microcode update to address a TSX errata. This microcode will, on execution of a TSX instruction (speculative or not) use (clobber) PMC3. This update will also provide a new MSR to change this behaviour along with a CPUID bit to enumerate the presence of this new MSR. When the MSR gets set; the microcode will no longer use PMC3 but will Force Abort every TSX transaction (upon executing COMMIT). When TSX Force Abort (TFA) is allowed (default); the MSR gets set when PMC3 gets scheduled and cleared when, after scheduling, PMC3 is unused. When TFA is not allowed; clear PMC3 from all constraints such that it will not get used. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra (Intel) authored
commit 52f64909 upstream Skylake systems will receive a microcode update to address a TSX errata. This microcode will (by default) clobber PMC3 when TSX instructions are (speculatively or not) executed. It also provides an MSR to cause all TSX transaction to abort and preserve PMC3. Add the CPUID enumeration and MSR definition. Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit 11f8b2d6 upstream Such that we can re-use it. Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit d01b1f96 upstream The cpuc data structure allocation is different between fake and real cpuc's; use the same code to init/free both. Signed-off-by:
-
Geert Uytterhoeven authored
commit 376991db upstream. When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS (R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for device pass-through for virtualization: echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind the kernel crashes with: Unable to handle kernel paging request at virtual address ffffffbf029ffffc Mem abort info: ESR = 0x96000006 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287 Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) pstate: 60400005 (nZCv daif +PAN -UAO) pc : __free_pages+0x8/0x58 lr : __dma_direct_free_pages+0x50/0x5c sp : ffffff801268baa0 x29: ffffff801268baa0 x28: 0000000000000000 x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0 x25: ffffffc6f9c60810 x24: 0000000000000000 x23: 00000000fffff000 x22: ffffff8012145000 x21: 0000000000000800 x20: ffffffbf029fffc8 x19: 0000000000000000 x18: ffffffc6f86c42c8 x17: 0000000000000000 x16: 0000000000000070 x15: 0000000000000003 x14: 0000000000000000 x13: ffffff801103d7f8 x12: 0000000000000028 x11: ffffff8011117604 x10: 0000000000009ad8 x9 : ffffff80110126d0 x8 : ffffffc6f7563000 x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018 x5 : ffffff8011cf3cc8 x4 : 0000000000004000 x3 : 0000000000080000 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffffbf029fffc8 Process bash (pid: 1098, stack limit = 0x00000000c38e3e32) Call trace: __free_pages+0x8/0x58 __dma_direct_free_pages+0x50/0x5c arch_dma_free+0x1c/0x98 dma_direct_free+0x14/0x24 dma_free_attrs+0x9c/0xdc dmam_release+0x18/0x20 release_nodes+0x25c/0x28c devres_release_all+0x48/0x4c device_release_driver_internal+0x184/0x1f0 device_release_driver+0x14/0x1c unbind_store+0x70/0xb8 drv_attr_store+0x24/0x34 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x154/0x1c4 __vfs_write+0x34/0x164 vfs_write+0xb4/0x16c ksys_write+0x5c/0xbc __arm64_sys_write+0x14/0x1c el0_svc_common+0x98/0x114 el0_svc_handler+0x1c/0x24 el0_svc+0x8/0xc Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404) ---[ end trace 8c564cdd3a1a840f ]--- While I've bisected this to commit e8e683ae ("iommu/of: Fix probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels does fix the problem, this turned out to be a red herring. On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL. Hence if a driver has used a managed DMA allocation API, the allocated DMA memory will be freed using the direct DMA ops, while it may have been allocated using a custom DMA ops (iommu_dma_ops in this case). Fix this by reversing the order of the calls to devres_release_all() and arch_teardown_dma_ops(). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> [rm: backport for 4.12-4.19 - kernels before 5.0 will not see the crash above, but may get silent memory corruption instead] Signed-off-by:
-
Daniel F. Dickinson authored
commit ce938231 upstream. ath9k_of_init() function[0] was initially written on the assumption that if someone had an explicit ath9k OF node that "there must be something wrong, why would someone add an OF node if everything is fine"[1] (Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>) "it turns out it's not that simple. with your requirements I'm now aware of two use-cases where the current code in ath9k_of_init() doesn't work without modifications"[1] The "your requirements" Martin speaks of is the result of the fact that I have a device (PowerCloud Systems CR5000) has some kind of default - not unique mac address - set and requires to set the correct MAC address via mac-address devicetree property, however: "some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom" should not be set (your use-case). in this case AH_USE_EEPROM should be set (which is the default when there is no OF node)"[1] The other use case is: the firmware on some PowerMac G5 seems to add a OF node for the ath9k card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP should be unset (which is the default when there is no OF node). see [3] After this patch to ath9k_of_init() the new behavior will be: if there's no OF node then everything is the same as before if there's an empty OF node then ath9k will use the hardware EEPROM (before ath9k would fail to initialize because no EEPROM data was provided by userspace) if there's an OF node with only a MAC address then ath9k will use the MAC address and the hardware EEPROM (see the case above) with "qca,no-eeprom" EEPROM data from userspace will be requested. the behavior here will not change [1] Martin provides additional background on EEPROM swapping[1]. Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on troubleshooting this issue and the basis for this patch. [0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615 [1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058 [2]https://github.com/openwrt/openwrt/pull/1613 [3]https://patchwork.kernel.org/patch/10241731/ Fixes: 138b4125 ("ath9k: parse the device configuration from an OF node") Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Daniel F. Dickinson <cshored@thecshore.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit 32a1fb36 upstream. Change these free functions to allow passing NULL as the argument and treat it as a no-op just like free(NULL) would. Or, if rqst->rq_iov is NULL. The second scenario could happen for smb2_queryfs() if the call to SMB2_query_info_init() fails and we go to qfs_exit to clean up and free all resources. In that case we have not yet assigned rqst[2].rq_iov and thus the rq_iov dereference in SMB2_close_free() will cause a NULL pointer dereference. [ bp: upstream patch also fixes SMB2_set_info_free which was introduced in 4.20 ] Fixes: 1eb9fb52 ("cifs: create SMB2_open_init()/SMB2_open_free() helpers") Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Gao Xiang authored
commit 419d6efc upstream. As Al pointed out, " ... and while we are at it, what happens to unsigned int nameoff = le16_to_cpu(de[mid].nameoff); unsigned int matched = min(startprfx, endprfx); struct qstr dname = QSTR_INIT(data + nameoff, unlikely(mid >= ndirents - 1) ? maxsize - nameoff : le16_to_cpu(de[mid + 1].nameoff) - nameoff); /* string comparison without already matched prefix */ int ret = dirnamecmp(name, &dname, &matched); if le16_to_cpu(de[...].nameoff) is not monotonically increasing? I.e. what's to prevent e.g. (unsigned)-1 ending up in dname.len? Corrupted fs image shouldn't oops the kernel.. " Revisit the related lookup flow to address the issue. Fixes: d72d1ce6 ("staging: erofs: add namei functions") Cc: <stable@vger.kernel.org> # 4.19+ Suggested-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 62dc4597 upstream. In real scenario, there could be several threads accessing xattrs of the same xattr-uninitialized inode, and init_inode_xattrs() almost at the same time. That's actually an unexpected behavior, this patch closes the race. Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
From: Sheng Yong <shengyong1@huawei.com> commit 3b1b5291 upstream. If it fails to read a shared xattr page, the inode's shared xattr array is not freed. The next time the inode's xattr is accessed, the previously allocated array is leaked. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
-
Gao Xiang authored
commit 7077fffc upstream. Currently, this will hit a BUG_ON for these symlinks as follows: - kernel message ------------[ cut here ]------------ kernel BUG at drivers/staging/erofs/xattr.c:59! SMP PTI CPU: 1 PID: 1170 Comm: getllxattr Not tainted 4.20.0-rc6+ #92 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:init_inode_xattrs+0x22b/0x270 Code: 48 0f 45 ea f0 ff 4d 34 74 0d 41 83 4c 24 e0 01 31 c0 e9 00 fe ff ff 48 89 ef e8 e0 31 9e ff eb e9 89 e8 e9 ef fd ff ff 0f 0$ <0f> 0b 48 89 ef e8 fb f6 9c ff 48 8b 45 08 a8 01 75 24 f0 ff 4d 34 RSP: 0018:ffffa03ac026bdf8 EFLAGS: 00010246 ------------[ cut here ]------------ ... Call Trace: erofs_listxattr+0x30/0x2c0 ? selinux_inode_listxattr+0x5a/0x80 ? kmem_cache_alloc+0x33/0x170 ? security_inode_listxattr+0x27/0x40 listxattr+0xaf/0xc0 path_listxattr+0x5a/0xa0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... ---[ end trace 3c24b49408dc0c72 ]--- Fix it by checking ->xattr_isize in init_inode_xattrs(), and it also fixes improper return value -ENOTSUPP (it should be -ENODATA if xattr is enabled) for those inodes. Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reported-by:
Li Guifu <bluce.liguifu@huawei.com> Tested-by:
-
Gao Xiang authored
commit cadf1ccf upstream. This patch enhances the missing error handling code for xattr submodule, which improves the stability for the rare cases. Reviewed-by:
-
Andreas Gruenbacher authored
commit 605b0487 upstream. Mark Syms has reported seeing tasks that are stuck waiting in find_insert_glock. It turns out that struct lm_lockname contains four padding bytes on 64-bit architectures that function glock_waitqueue doesn't skip when hashing the glock name. As a result, we can end up waking up the wrong waitqueue, and the waiting tasks may be stuck forever. Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for the key length. Reported-by:
Mark Syms <mark.syms@citrix.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 18c0ab87 ] checkentry(tee_tg_check) should initialize priv->oif from dev if possible. But only netdevice notifier handler can set that. Hence priv->oif is always -1 until notifier handler is called. Fixes: 9e2f6c5d ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit f24d2d4f ] TEE netdevice notifier handler checks only interface name. however each netns can have same interface name. hence other netns's interface could be selected. test commands: %ip netns add vm1 %iptables -I INPUT -p icmp -j TEE --gateway 192.168.1.1 --oif enp2s0 %ip link set enp2s0 netns vm1 Above rule is in the root netns. but that rule could get enp2s0 ifindex of vm1 by notifier handler. After this patch, TEE rule is added to the per-netns list. Fixes: 9e2f6c5d ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit e02f5c1b ] The DRM driver stack is designed to work with cache coherent devices only, but permits an optimization to be enabled in some cases, where for some buffers, both the CPU and the GPU use uncached mappings, removing the need for DMA snooping and allocation in the CPU caches. The use of uncached GPU mappings relies on the correct implementation of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU will use cached mappings nonetheless. On x86 platforms, this does not seem to matter, as uncached CPU mappings will snoop the caches in any case. However, on ARM and arm64, enabling this optimization on a platform where NoSnoop is ignored results in loss of coherency, which breaks correct operation of the device. Since we have no way of detecting whether NoSnoop works or not, just disable this optimization entirely for ARM and arm64. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Zhou <David1.Zhou@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Michel Daenzer <michel.daenzer@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: amd-gfx list <amd-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Reported-by:
Carsten Haitzler <Carsten.Haitzler@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.kernel.org/patch/10778815/Signed-off-by:
-
Marek Szyprowski authored
commit a3238924 upstream. The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is set too low. Increase it to the 2000mV as specified on the board schematic. So far the board worked fine, because of the bug in the PMIC driver, which used incorrect step value for that regulator. It interpreted the voltage value set by the bootloader as 1225mV and kept it unchanged. The regulator driver has been however fixed recently in the commit 56b5d4ea ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results in reading the proper buck8 value and forcing it to 1500mV on boot. This is not enough for proper board operation and results in eMMC errors during heavy IO traffic. Increasing maximum voltage value for buck8 restores original driver behavior and fixes eMMC issues. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 86a2d2ac ("ARM: dts: Add dts file for Odroid XU3 board") Fixes: 56b5d4ea ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Marek Szyprowski authored
commit a66352e0 upstream. Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250 PMU node. This fixes the following warning on boot: exynos_clkout_init: failed to register clkout clock Fixes: d19bb397 ("ARM: dts: exynos: Update PMU node with CLKOUT related data") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
commit ec33745b upstream. Commit 225da7e6 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d ("mmc: pwrseq: convert to proper platform device"). It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration. Cc: <stable@vger.kernel.org> Reported-by:
Markus Reichl <m.reichl@fivetechno.de> Suggested-by:
Ulf Hansson <ulf.hansson@linaro.org> Fixes: 225da7e6 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") Signed-off-by:
-
Alistair Strachan authored
commit 8d26c139 upstream. This reverts commit abd7d097. This change was already partially reverted by John Stultz in commit 9c6d26df ("arm64: dts: hikey: Fix eMMC corruption regression"). This change appears to cause controller resets and block read failures which prevents successful booting on some hikey boards. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.17+ Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Jan Kiszka authored
commit 83b94417 upstream. Somewhere along recent changes to power control of the wl1835, power-on became very unreliable on the hikey, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, the hikey would already be happy with 1 ms. Still, we use the safer 10 ms, like on the Ultra96. Fixes: ea452678 ("arm64: dts: hikey: Fix WiFi support") Cc: <stable@vger.kernel.org> #4.12+ Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
-
Jan Kiszka authored
commit 35a4f89c upstream. Somewhere along recent changes to power control of the wl1831, power-on became very unreliable on the Ultra96, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, Ultra96 is already happy with 10 ms. Fixes: 5869ba06 ("arm64: zynqmp: Add support for Xilinx zcu100-revC") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Alexander Shishkin authored
commit 2e095ce7 upstream. On Denverton's integration of the Intel(R) Trace Hub (for a reference and overview see Documentation/trace/intel_th.rst) the reported size of one of its resources (RTIT_BAR) doesn't match its actual size, which leads to overlaps with other devices' resources. In practice, it overlaps with XHCI MMIO space, which results in the xhci driver bailing out after seeing its registers as 0xffffffff, and perceived disappearance of all USB devices: intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006) xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead xhci_hcd 0000:00:15.0: HC died; cleaning up usb 1-1: USB disconnect, device number 2 For this reason, we need to resize the RTIT_BAR on Denverton to its actual size, which in this case is 4MB. The corresponding erratum is DNV36 at the link below: DNV36. Processor Host Root Complex May Incorrectly Route Memory Accesses to Intel
® Trace Hub Problem: The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is reported as a 2KB memory range. Due to this erratum, the processor Host Root Complex will forward addresses from RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub. Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1 space may not function correctly. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: No Fix. Note that 5118ccd3 ("intel_th: pci: Add Denverton SOC support") updates the Trace Hub driver so it claims the Denverton device, but the resource overlap exists regardless of whether that driver is loaded or that commit is included. Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdfSigned-off-by:Alexander Shishkin <alexander.shishkin@linux.intel.com> [bhelgaas: include erratum text, clarify relationship with 5118ccd3] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 5e420fe6 upstream. Add missing break statement and fix identation issue. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 9cb62fa2 ("aacraid: Log firmware AIF messages") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit df997abe upstream. Add missing break statement in order to prevent the code from falling through to case ISCSI_BOOT_TGT_NAME, which is unnecessary. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b33a84a3 ("ibft: convert iscsi_ibft module to iscsi boot lib") Cc: stable@vger.kernel.org Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Vincent Batts authored
commit e154ab69 upstream. Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad. Signed-off-by:
Vincent Batts <vbatts@hashbangbash.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jason Gerecke authored
commit 44fc95e2 upstream. Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device: $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0 https://github.com/linuxwacom/xf86-input-wacom/issues/40Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Keith Busch authored
[ Upstream commit 4726bcf3 ] The reset work holds a mutex to prevent races with removal modifying the same resources, but was unlocking only on success. Unlock on failure too. Fixes: 5c959d73 ("nvme-pci: fix rapid add remove sequence") Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8c772a9b ] Our test reported the following stack, and vmcore showed that ->inflight counter is -1. [ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e The ->inflight counter may be negative (-1) if 1) blk-iolatency was disabled when the IO was issued, 2) blk-iolatency was enabled before this IO reached its endio, 3) the ->inflight counter is decreased from 0 to -1 in endio() In fact the hang can be easily reproduced by the below script, H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test echo "+io" > $H/cgroup.subtree_control mkdir -p $P echo $$ > $P/cgroup.procs xfs_io -f -d -c "pwrite 0 4k" /dev/sdg echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency xfs_io -f -d -c "pwrite 0 4k" /dev/sdg This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running. Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care. Signed-off-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 0aa4febb ] Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit fb1faab7 ] Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 660492bc ] When slowpath messages are sent with high rate, the resulting events can lead to a FW assert in case they are not handled fast enough (Event Queue Full assert). Attempt to send queued slowpath messages only after the newly evacuated entries in the EQ ring are indicated to FW. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 43636c80 ] When something let __find_get_block_slow() hit all_mapped path, it calls printk() for 100+ times per a second. But there is no need to print same message with such high frequency; it is just asking for stall warning, or at least bloating log files. [ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.873324][T15342] b_state=0x00000029, b_size=512 [ 399.878403][T15342] device loop0 blocksize: 4096 [ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.890400][T15342] b_state=0x00000029, b_size=512 [ 399.895595][T15342] device loop0 blocksize: 4096 [ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.907471][T15342] b_state=0x00000029, b_size=512 [ 399.912506][T15342] device loop0 blocksize: 4096 This patch reduces frequency to up to once per a second, in addition to concatenating three lines into one. [ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096 Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Keith Busch authored
[ Upstream commit 5c959d73 ] A surprise removal may fail to tear down request queues if it is racing with the initial asynchronous probe. If that happens, the remove path won't see the queue resources to tear down, and the controller reset path may create a new request queue on a removed device, but will not be able to make forward progress, deadlocking the pci removal. Protect setting up non-blocking resources from a shutdown by holding the same mutex, and transition to the CONNECTING state after these resources are initialized so the probe path may see the dead controller state before dispatching new IO. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081Reported-by:
Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Signed-off-by:
Alex Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
-
Keith Busch authored
[ Upstream commit e7ad43c3 ] If a controller supports the NS Change Notification, the namespace scan_work is automatically triggered after attaching a new namespace. Occasionally the namespace scan_work may append the new namespace to the list before the admin command effects handling is completed. The effects handling unfreezes namespaces, but if it unfreezes the newly attached namespace, its request_queue freeze depth will be off and we'll hit the warning in blk_mq_unfreeze_queue(). On the next namespace add, we will fail to freeze that queue due to the previous bad accounting and deadlock waiting for frozen. Fix that by preventing scan work from altering the namespace list while command effects handling needs to pair freeze with unfreeze. Reported-by:
Wen Xiong <wenxiong@us.ibm.com> Tested-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Philip Yang authored
[ Upstream commit 0a5f49cb ] amdgpu_vm_get_task_info is called from interrupt handler and sched timeout workqueue, we should use irq version spin_lock to avoid deadlock. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Tony Lindgren authored
[ Upstream commit c6e2bd95 ] We currently get the following error with pixcir_ts driver during a suspend resume cycle: omap_i2c 4802a000.i2c: controller timed out pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110 pixcir_ts 1-005c: Failed to disable interrupt generation: -110 pixcir_ts 1-005c: Failed to stop dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98 [pixcir_i2c_ts] returns -110 PM: Device 1-005c failed to resume: error -110 And at least am437x based devices with pixcir_ts will fail to resume to a touchscreen that is configured as the wakeup-source in device tree for these devices. This is because pixcir_ts tries to reconfigure it's registers for noirq suspend which fails. This also leaves i2c-omap in enabled state for suspend. Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS. Let's also get rid of some ifdefs while at it and replace them with __maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS already deal with the various PM Kconfig options. Reported-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit d8f6382a ] This reverts commit bbc0f8bd. It added a warning whose intent was to check whether the rport was still linked into the peer list. It doesn't work as intended and gives false positive warnings for two reasons: 1) If the rport is never linked into the peer list it will not be considered empty since the list_head is never initialized. 2) If the rport is deleted from the peer list using list_del_rcu(), then the list_head is in an undefined state and it is not considered empty. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Jun-Ru Chang authored
[ Upstream commit 2b424cfc ] Patch (b6c7a324 "MIPS: Fix get_frame_info() handling of microMIPS function size.") introduces additional function size check for microMIPS by only checking insn between ip and ip + func_size. However, func_size in get_frame_info() is always 0 if KALLSYMS is not enabled. This causes get_frame_info() to return immediately without calculating correct frame_size, which in turn causes "Can't analyze schedule() prologue" warning messages at boot time. This patch removes func_size check, and let the frame_size check run up to 128 insns for both MIPS and microMIPS. Signed-off-by:
Jun-Ru Chang <jrjang@realtek.com> Signed-off-by:
Tony Wu <tonywu@realtek.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: b6c7a324 ("MIPS: Fix get_frame_info() handling of microMIPS function size.") Cc: <ralf@linux-mips.org> Cc: <jhogan@kernel.org> Cc: <macro@mips.com> Cc: <yamada.masahiro@socionext.com> Cc: <peterz@infradead.org> Cc: <mingo@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Signed-off-by:
-
