- 30 May, 2019 40 commits
-
-
Heiner Kallweit authored
This patch is a further step towards decoupling firmware handling from the actual driver code. Firmware can be for PHY and/or MAC, and two pairs of read/write functions are needed for handling PHY firmware and MAC firmware respectively. Pass these functions via struct rtl_fw and avoid the ugly switching of mdio_ops behind the back of rtl_writephy(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Simplify the function a little bit and use strscpy() where appropriate. Signed-off-by:
-
Heiner Kallweit authored
Call the pll power down function also for chip versions 02..06 and 13..15. The MAC can't be powered down on these chip versions, but at least they benefit from the speed-down power-saving if WoL is enabled. Signed-off-by:
-
Matteo Croce authored
The same skb_checksum_ops struct is defined twice in two different places, leading to code duplication. Declare it as a global variable into a common header instead of allocating it on the stack on each function call. bloat-o-meter reports a slight code shrink. add/remove: 1/1 grow/shrink: 0/10 up/down: 128/-1282 (-1154) Function old new delta sctp_csum_ops - 128 +128 crc32c_csum_ops 16 - -16 sctp_rcv 6616 6583 -33 sctp_packet_pack 4542 4504 -38 nf_conntrack_sctp_packet 4980 4926 -54 execute_masked_set_action 6453 6389 -64 tcf_csum_sctp 575 428 -147 sctp_gso_segment 1292 1126 -166 sctp_csum_check 579 412 -167 sctp_snat_handler 957 772 -185 sctp_dnat_handler 1321 1132 -189 l4proto_manip_pkt 2536 2313 -223 Total: Before=359297613, After=359296459, chg -0.00% Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Matteo Croce <mcroce@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Matteo Croce authored
Commit 283c16a2 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") introduces some macros to avoid doing indirect calls. Use these helpers to remove two indirect calls in the L4 checksum calculation for devices which don't have hardware support for it. As a test I generate packets with pktgen out to a dummy interface with HW checksumming disabled, to have the checksum calculated in every sent packet. The packet rate measured with an i7-6700K CPU and a single pktgen thread raised from 6143 to 6608 Kpps, an increase by 7.5% Suggested-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/dsa/sja1105/sja1105_static_config.c:446:1: warning: symbol 'static_config_check_memory_size' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
David S. Miller authored
Pablo Neira Ayuso says: ==================== connection tracking support for bridge This patchset adds native connection tracking support for the bridge. Patch #1 and #2 extract code from IPv4/IPv6 fragmentation core and introduce the fraglist splitter. That splits a skbuff fraglist into independent fragments. Patch #3 and #4 also extract code from IPv4/IPv6 fragmentation core and introduce the skbuff into fragments transformer. This can be used by linearized skbuffs (eg. coming from nfqueue and ct helpers) as well as cloned skbuffs (that are either seen either with taps or with bridge port flooding). Patch #5 moves the specific IPCB() code from these new fragment splitter/transformer APIs into the IPv4 stack. The bridge has a different control buffer layout and it starts using this new APIs in this patchset. Patch #6 adds basic infrastructure that allows to register bridge conntrack support. Patch #7 adds bridge conntrack support (only for IPv4 in this patch). Patch #8 adds IPv6 support for the bridge conntrack support. Patch #9 registers the IPv4/IPv6 conntrack hooks in case the bridge conntrack is used to deal with local traffic, ie. prerouting -> input bridge hook path. This cover the bridge interface has a IP address scenario. Before this patchset, only chance for people to do stateful filtering is to use the `br_netfilter` emulation layer, that turns bridge frame into IPv4/IPv6 packets and inject them into the IPv4/IPv6 hooks. Apparently, this module allows users to use iptables and all of its feature-set from the bridge, including stateful filtering. However, this approach is flawed in many aspects that have been discussed many times. This is a step forward to deprecate `br_netfilter'. v2: Fix English typo in commit message. v3: Fix another English typo in commit message. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
This patch enables IPv4 and IPv6 conntrack from the bridge to deal with local traffic. Hence, packets that are passed up to the local input path are confirmed later on from the {ipv4,ipv6}_confirm() hooks. For packets leaving the IP stack (ie. output path), fragmentation occurs after the inet postrouting hook. Therefore, the bridge local out and postrouting bridge hooks see fragments with conntrack objects, which is inconsistent. In this case, we could defragment again from the bridge output hook, but this is expensive. The recommended filtering spot for outgoing locally generated traffic leaving through the bridge interface is to use the classic IPv4/IPv6 output hook, which comes earlier. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
br_defrag() and br_fragment() indirections are added in case that IPv6 support comes as a module, to avoid pulling innecessary dependencies in. The new fraglist iterator and fragment transformer APIs are used to implement the refragmentation code. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds basic connection tracking support for the bridge, including initial IPv4 support. This patch register two hooks to deal with the bridge forwarding path, one from the bridge prerouting hook to call nf_conntrack_in(); and another from the bridge postrouting hook to confirm the entry. The conntrack bridge prerouting hook defragments packets before passing them to nf_conntrack_in() to look up for an existing entry, otherwise a new entry is allocated and it is attached to the skbuff. The conntrack bridge postrouting hook confirms new conntrack entries, ie. if this is the first packet seen, then it adds the entry to the hashtable and (if needed) it refragments the skbuff into the original fragments, leaving the geometry as is if possible. Exceptions are linearized skbuffs, eg. skbuffs that are passed up to nfqueue and conntrack helpers, as well as cloned skbuff for the local delivery (eg. tcpdump), also in case of bridge port flooding (cloned skbuff too). The packet defragmentation is done through the ip_defrag() call. This forces us to save the bridge control buffer, reset the IP control buffer area and then restore it after call. This function also bumps the IP fragmentation statistics, it would be probably desiderable to have independent statistics for the bridge defragmentation/refragmentation. The maximum fragment length is stored in the control buffer and it is used to refragment the skbuff from the postrouting path. The new fraglist splitter and fragment transformer APIs are used to implement the bridge refragmentation code. The br_ip_fragment() function drops the packet in case the maximum fragment size seen is larger than the output port MTU. This patchset follows the principle that conntrack should not drop packets, so users can do it through policy via invalid state matching. Like br_netfilter, there is no refragmentation for packets that are passed up for local delivery, ie. prerouting -> input path. There are calls to nf_reset() already in several spots in the stack since time ago already, eg. af_packet, that show that skbuff fraglist handling from the netif_rx path is supported already. The helpers are called from the postrouting hook, before confirmation, from there we may see packet floods to bridge ports. Then, although unlikely, this may result in exercising the helpers many times for each clone. It would be good to explore how to pass all the packets in a list to the conntrack hook to do this handle only once for this case. Thanks to Florian Westphal for handing me over an initial patchset version to add support for conntrack bridge. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds infrastructure to register and to unregister bridge support for the conntrack module via nf_ct_bridge_register() and nf_ct_bridge_unregister(). Signed-off-by:
-
Pablo Neira Ayuso authored
Deal with the IPCB() area away from the iterators. The bridge codebase has its own control buffer layout, move specific IP control buffer handling into the IPv4 codepath. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch exposes a new API to refragment a skbuff. This allows you to split either a linear skbuff or to force the refragmentation of an existing fraglist using a different mtu. The API consists of: * ip6_frag_init(), that initializes the internal state of the transformer. * ip6_frag_next(), that allows you to fetch the next fragment. This function internally allocates the skbuff that represents the fragment, it pushes the IPv6 header, and it also copies the payload for each fragment. The ip6_frag_state object stores the internal state of the splitter. This code has been extracted from ip6_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch exposes a new API to refragment a skbuff. This allows you to split either a linear skbuff or to force the refragmentation of an existing fraglist using a different mtu. The API consists of: * ip_frag_init(), that initializes the internal state of the transformer. * ip_frag_next(), that allows you to fetch the next fragment. This function internally allocates the skbuff that represents the fragment, it pushes the IPv4 header, and it also copies the payload for each fragment. The ip_frag_state object stores the internal state of the splitter. This code has been extracted from ip_do_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds the skbuff fraglist split iterator. This API provides an iterator to transform the fraglist into single skbuff objects, it consists of: * ip6_fraglist_init(), that initializes the internal state of the fraglist iterator. * ip6_fraglist_prepare(), that restores the IPv6 header on the fragment. * ip6_fraglist_next(), that retrieves the fragment from the fraglist and updates the internal state of the iterator to point to the next fragment in the fraglist. The ip6_fraglist_iter object stores the internal state of the iterator. This code has been extracted from ip6_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds the skbuff fraglist splitter. This API provides an iterator to transform the fraglist into single skbuff objects, it consists of: * ip_fraglist_init(), that initializes the internal state of the fraglist splitter. * ip_fraglist_prepare(), that restores the IPv4 header on the fragments. * ip_fraglist_next(), that retrieves the fragment from the fraglist and it updates the internal state of the splitter to point to the next fragment skbuff in the fraglist. The ip_fraglist_iter object stores the internal state of the iterator. This code has been extracted from ip_do_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
-
David S. Miller authored
Jason Baron says: ==================== add TFO backup key Christoph, Igor, and I have worked on an API that facilitates TFO key rotation. This is a follow up to the series that Christoph previously posted, with an API that meets both of our use-cases. Here's a link to the previous work: https://patchwork.ozlabs.org/cover/1013753/ Changes in v2: -spelling fixes in ip-sysctl.txt (Jeremy Sowden) -re-base to latest net-next ==================== Signed-off-by:
-
Jason Baron authored
Demonstrate how the primary and backup TFO keys can be rotated while minimizing the number of client cookies that are rejected. Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jason Baron authored
Add docs for /proc/sys/net/ipv4/tcp_fastopen_key Signed-off-by:
-
Jason Baron authored
Add the ability to add a backup TFO key as: # echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key The key before the comma acks as the primary TFO key and the key after the comma is the backup TFO key. This change is intended to be backwards compatible since if only one key is set, userspace will simply read back that single key as follows: # echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key # cat /proc/sys/net/ipv4/tcp_fastopen_key x-x-x-x Signed-off-by:
-
Jason Baron authored
Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in addition to the current 'primary' key. The primary key is used to encrypt and decrypt TFO cookies, while the backup is only used to decrypt TFO cookies. The backup key is used to maximize successful TFO connections when TFO keys are rotated. Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set. This patch now allows a 32-byte value to be set, where the first 16 bytes are used as the primary key and the second 16 bytes are used for the backup key. Similarly, for getsockopt(), we can receive a 32-byte value as output if requested. If a 16-byte value is used to set the primary key via TCP_FASTOPEN_KEY, then any previously set backup key will be removed. Signed-off-by:
-
Jason Baron authored
We would like to be able to rotate TFO keys while minimizing the number of client cookies that are rejected. Currently, we have only one key which can be used to generate and validate cookies, thus if we simply replace this key clients can easily have cookies rejected upon rotation. We propose having the ability to have both a primary key and a backup key. The primary key is used to generate as well as to validate cookies. The backup is only used to validate cookies. Thus, keys can be rotated as: 1) generate new key 2) add new key as the backup key 3) swap the primary and backup key, thus setting the new key as the primary We don't simply set the new key as the primary key and move the old key to the backup slot because the ip may be behind a load balancer and we further allow for the fact that all machines behind the load balancer will not be updated simultaneously. We make use of this infrastructure in subsequent patches. Suggested-by:
Igor Lubashev <ilubashe@akamai.com> Signed-off-by:
-
Christoph Paasch authored
Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher' argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent patches will provide different ciphers based on which key is being used for the cookie generation. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Hardware monitoring enhancements This patchset from Vadim provides various hardware monitoring related improvements for mlxsw. Patch #1 allows querying firmware version from the switch driver when the underlying bus is I2C. This is useful for baseboard management controller (BMC) systems that communicate with the ASIC over I2C. Patch #2 improves driver's performance over I2C by utilizing larger transactions sizes, if possible. Patch #3 re-orders driver's initialization sequence to enforce a specific firmware version before new firmware features are utilized. This is a prerequisite for patches #4-#6. Patches #4-#6 expose the temperature of inter-connect devices (gearboxes) that are present in Mellanox SN3800 systems and split 2x50Gb/s lanes to 4x25Gb/s lanes. Patches #7-#8 reduce the transaction size when reading SFP modules temperatures, which is crucial when working over I2C. ==================== Signed-off-by: -
Vadim Pasternak authored
Obtain SFP modules temperatures through MTMP register instead of MTBR register, because the first one utilizes shorter transaction buffer size for request. It improves performance in case low frequency interface (I2C) is used for communication with a chip. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Vadim Pasternak authored
Extend sensor index size for Management Temperature Bulk Register (MTBR) and Management Temperature Register (MTMP) upto 12 bits in order to align registers description with new version of PRM document. Add define for base sensor index for SFP modules temperature reading for MTMP register. Signed-off-by:
-
Vadim Pasternak authored
Add new attributes to hwmon object for exposing inter-connects temperature input, highest, reset_history temperatures and label. Temperatures are read from Management Temperature Register. The number of inter-connect devices is read from Management General Peripheral Information Register. Signed-off-by:
-
Vadim Pasternak authored
Add MGPIR - Management General Peripheral Information Register, which allows software to query the hardware and firmware general information of peripheral entities as Gearboxes etc. Signed-off-by:
-
Vadim Pasternak authored
Extend the size of sensor_index field of MTMP (Management Temperature Register), from 8 to 12 bits due to hardware change. Add define for sensor index for Gear Box (inter-connects) temperature reading. Signed-off-by:
-
Ido Schimmel authored
The driver core first registers with the hwmon and thermal subsystems and only then proceeds to initialize the switch driver (e.g., mlxsw_spectrum). It is only during the last stage that the current firmware version is validated and a newer one flashed, if necessary. The above means that if a new firmware feature is utilized by the hwmon/thermal code, the driver will not be able to load. Solve this by re-ordering initializing the switch driver before registering with the hwmon and thermal subsystems. Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Acked-by:
-
Vadim Pasternak authored
Current implementation uses fixed size of I2C data transaction buffer. Allow to set size of I2C transactions according to I2C physical adapter capability. For that purpose adapter read and write size is obtained from the I2C physical adapter and buffer size is set according to the minimum of these two values. If adapter does not provide such info, default buffer size is to be used. It allows to improve performance of I2C access to silicon when long size transactions are used. Signed-off-by:
-
Vadim Pasternak authored
Extend initialization flow with query request for firmware info in order to obtain firmware version info. This info is to be provided to minimal driver to support ethtool get_drvinfo() interface. Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: selftests: Two fixes Two fixes reported by kbuild. ==================== Signed-off-by: -
Jose Abreu authored
kfree_skb() shall be used instead of kfree(). Fix it. Fixes: 091810db ("net: stmmac: Introduce selftests support") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
Variable shall be __be16. Fix it. Fixes: 091810db ("net: stmmac: Introduce selftests support") Reported-by:
-
Herbert Xu authored
The smp_store_release call in fqdir_exit cannot protect the setting of fqdir->dead as claimed because its memory barrier is only guaranteed to be one-way and the barrier precedes the setting of fqdir->dead. IOW it doesn't provide any barriers between fq->dir and the following hash table destruction. In fact, the code is safe anyway because call_rcu does provide both the memory barrier as well as a guarantee that when the destruction work starts executing all RCU readers will see the updated value for fqdir->dead. Therefore this patch removes the unnecessary smp_store_release call as well as the corresponding READ_ONCE on the read-side in order to not confuse future readers of this code. Comments have been added in their places. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
YueHaibing authored
Fix smatch warning: drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1236 mvpp2_ethtool_cls_rule_ins() warn: unsigned 'info->fs.location' is never less than zero. 'info->fs.location' is u32 type, never less than zero. Signed-off-by:
-
Jisheng Zhang authored
Make use of devm_alloc_etherdev_mqs() to simplify the code. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
David S. Miller authored
Rename _P to _P_VAL and _R to _R_VAL to avoid global namespace conflicts: drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’: drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined #define _P 32 In file included from ./include/acpi/platform/aclinux.h:54, from ./include/acpi/platform/acenv.h:152, from ./include/acpi/acpi.h:22, from ./include/linux/acpi.h:34, from ./include/linux/i2c.h:17, from drivers/media/dvb-frontends/tua6100.h:30, from drivers/media/dvb-frontends/tua6100.c:32: ./include/linux/ctype.h:14: note: this is the location of the previous definition #define _P 0x10 /* punct */ Signed-off-by: -
David S. Miller authored
Ruslan Babayev says: ==================== Enable SFP on ACPI based systems Changes: v2: - more descriptive commit body v3: - made 'i2c_acpi_find_adapter_by_handle' static inline v4: - don't initialize i2c_adapter to NULL. Instead see below... - handle the case of neither DT nor ACPI present as invalid. - alphabetical includes. - use has_acpi_companion(). - use the same argument name in i2c_acpi_find_adapter_by_handle() in both stubbed and non-stubbed cases. ==================== Signed-off-by:
-
