- 25 Sep, 2014 8 commits
-
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Joe Carnuccio authored
Signed-off-by:
-
Joe Carnuccio authored
Since the entry call array is sorted in order of entry type opcode, the search can be terminated as soon as the search key is exceeded. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Chris J Arges authored
When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used data can be improperly zeroed out using the mptfusion driver. This patch disables write_same for this driver and the vmware subsystem_vendor which ensures that manual zeroing out is used instead. Cc: stable@vger.kernel.org BugLink: http://bugs.launchpad.net/bugs/1371591Reported-by:
Bruce Lucas <bruce.lucas@mongodb.com> Tested-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tomas Henzl authored
Add a call to pci_set_master(...) missing in the previous patch "hpsa: refine the pci enable/disable handling". Found thanks to Rob Elliot. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Robert Elliott <elliott@hp.com> Tested-by:
-
Ching Huang authored
Signed-off-by: Ching Huang <ching 2048@areca.com.tw> Reviewed-by:
-
wenxiong@linux.vnet.ibm.com authored
Failing Device information are logged when IOA firmware detected these illegal request such as IOA firmware doesn't support inquiry with page code 2. The patch fixes the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Tested-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
- 22 Sep, 2014 3 commits
-
-
Anish Bhatt authored
cxgbi_inet6addr_handler() can be called in interrupt context, so use rcu protected list while finding netdev Applies on top of core-for-3.18 Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
Karen Xie <kxie@chelsio.com> Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver") Fixes: 759a0cc5 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of the warning messages since they will clutter up various system logs and are of questionable value to the end user. For debugging purposes, this information can be gotten by setting the scsi log level appropriately. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Sreekanth Reddy authored
This patch will fix the below compilation errors on i386 ARCH drivers/built-in.o: In function `_scsih_qcmd': mpt2sas_scsih.c:(.text+0x1e7b56): undefined reference to `__udivdi3' mpt2sas_scsih.c:(.text+0x1e7b8a): undefined reference to `__umoddi3' Used sector_div() API to fix above compilation errors. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by:
-
- 16 Sep, 2014 29 commits
-
-
Ching Huang authored
Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reviewed-by:
-
Ching Huang authored
Call scsi_scan_host at the end of host initialization and fix and error path to free allocated resource. Signed-off-by:
-
Ching Huang authored
Add code to support the new Areca Raid ARC12x4 series adapters. Signed-off-by:
-
Ching Huang authored
Revise comment and some character strings. Signed-off-by:
-
Ching Huang authored
Fix sparse utility checking errors and warnings. Signed-off-by:
-
Ching Huang authored
Rewrite ioctl entry and its relate function. This patch fix ioctl data read/write error and change data I/O access from byte to Dword. Signed-off-by:
-
Ching Huang authored
This modification is for consistency with upcoming adapter type D. Both adapter type B and D have similar H/W and S/W structure. Signed-off-by:
-
Ching Huang authored
Rename some variable and function names for readability and consistency. Signed-off-by:
-
Ching Huang authored
Clear outbound doorbell buffer completely for adapter type C. This is to prevent getting bad data input from IOP before ioctl command processing starts. Signed-off-by:
-
Ching Huang authored
Adjust printing order of adapter model name and firmware version. Signed-off-by:
-
Ching Huang authored
Remove calling arcmsr_hbb_enable_driver_mode by in-lining the code into the caller. Signed-off-by:
-
Ching Huang authored
Revise message_isr_bh_fn to remove the duplicate code for each adapter type. Signed-off-by:
-
Ching Huang authored
Signed-off-by:
-
Ching Huang authored
This patch fixes the wrong return status of abort command. Signed-off-by:
-
Ching Huang authored
This patch limits the max. number of SCSI commmand request to avoid command overflow. Signed-off-by:
-
Ching Huang authored
This patch adds code to support system hibernation. Signed-off-by:
-
Ching Huang authored
This patch adds code to support MSI and MSI-X interrupt. Signed-off-by:
-
Ching Huang authored
This patch rewrites the interrupt service routine relate function to fix a command timeout under heavy controller load. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments by Tomas Henzl. Driver version upgrade patch. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Added comment for to-do work. Problem statement: MFI link list in megaraid_sas driver is used from mfi-mpt pass-through commands. This list can be corrupted due to many possible race conditions in driver and eventually we may see kernel panic. One example - MFI frame is freed from calling process as driver send command via polling method and interrupt for that command comes after driver free mfi frame (actually even after some other context reuse the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and access that MFI frame and finally in-used MFI frame’s list will be corrupted. High level description of new solution - Free MFI and MPT command from same context. Free both the command either from process (from where mfi-mpt pass-through was called) or from ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which will do MFI/MPT list corruption. Renamed the cmd_pool_lock which is used in instance as well as fusion with below name. mfi_pool_lock and mpt_pool_lock to add more code readability. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Current driver does fast path read load balancing between arm and mirror disk for two Drive Raid-1 configuration only. Now, Driver support fast path read load balancing for all (any number of disk) Raid-1 configuration. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. For certain deployment, we may need to disable irq cpu affinity hint. This module parameter provides option for use to disable irq cpu affinity hint and allow irqbalancer to handle the rest. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Round down the max sge to power of two. Earlier max sge limit is 70 SGE, which will allow block layer to send 280K IO frame. It is optimal to provide max IO size aligned to the smallest possible stripe size. E.a Consider that we have configured RAID Volumes which does not allow Fast Path across the stripe. Raid volume with stripe size = 256K, will have peformance hit if we get io frame of size 280K. Driver will not send IO frame large than stripe size to the Fast Path. Also, FW will convert 280K frame into 256K + 24K. This is an additional overhead. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Megaraid_sas driver can now work in host lock less mode. Remove host lock less as megaraid_sas driver will have safer access to raid map as described in earlier patch. We now keep Driver Raid map copy, which will make sure that driver will always have old or new map Driver raid map will be replaced safely in MR_PopulateDrvRaidMap(), so there is no issue even if IO is continue from the scsi mid layer. There is a plan to remove "host_lock" and "hba_lock" usage from megaraid_sas in future. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: -
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Current driver updates reply post host index to let firmware know that replies are processed, while returning from ISR function, only if there is no oustanding replies in reply queue. Driver will free the request frame immediately from ISR but reply post host index is not yet updated. It means freed request can be used by submission path and there may be a tight loop in request/reply path. In such condition, firmware may crash when it tries to post reply and there is no free reply post descriptor. Eventually two things needs to be change to avoid this issue. Increase reply queue depth (double than request queue) to accommodate worst case scenario. Update reply post host index to firmware once it reach to some pre-defined threshold value. This change will make sure that firmware will always have some buffer of reply descriptor and will never find empty reply descriptor in completion path. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Reduce the assingment for u64 req_data variable. Use writeq() for 64bit PCI write instead of writel() to avoid additional lock overhead. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Resending the patch. Addressed the review comments from Tomas Henzl. Current driver allow device scan for all the devices on channel 0 and 1. E.a If we have two single drive raid volumes, we may see prints like below. First two prints are for physical device which are used to form VD. Prints like this creates confusion as it is really not required to scan any hidden physical devices. scsi1 : LSI SAS based MegaRAID driver scsi 1:0:0:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 scsi 1:0:1:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 scsi 1:2:0:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 scsi 1:2:1:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 When slave_alloc called, sdev-type will not be set, so current code will always return "0" in slave_alloc callback. This patch make sure that driver return "-ENXIO" for non-syspd devices. After this patch, we will see prints in syslog only for devices which are exposed. For current example, below print will be available in syslog. scsi1 : LSI SAS based MegaRAID driver scsi 1:2:0:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 scsi 1:2:1:0: Direct-Access LSI MR9361-8i 4.21 PQ: 0 ANSI: 5 Signed-off-by:
-
