- 10 Oct, 2014 40 commits
-
-
Vladimir Davydov authored
memcg_can_account_kmem() returns true iff !mem_cgroup_disabled() && !mem_cgroup_is_root(memcg) && memcg_kmem_is_active(memcg); To begin with the !mem_cgroup_is_root(memcg) check is useless, because one can't enable kmem accounting for the root cgroup (mem_cgroup_write() returns EINVAL on an attempt to set the limit on the root cgroup). Furthermore, the !mem_cgroup_disabled() check also seems to be redundant. The point is memcg_can_account_kmem() is called from three places: mem_cgroup_salbinfo_read(), __memcg_kmem_get_cache(), and __memcg_kmem_newpage_charge(). The latter two functions are only invoked if memcg_kmem_enabled() returns true, which implies that the memory cgroup subsystem is enabled. And mem_cgroup_slabinfo_read() shows the output of memory.kmem.slabinfo, which won't exist if the memory cgroup is completely disabled. So let's substitute all the calls to memcg_can_account_kmem() with plain memcg_kmem_is_active(), and kill the former. Signed-off-by:Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: -
Johannes Weiner authored
When attempting to charge pages, we first charge the memory counter and then the memory+swap counter. If one of the counters is at its limit, we enter reclaim, but if it's the memory+swap counter, reclaim shouldn't swap because that wouldn't change the situation. However, if the counters have the same limits, we never get to the memory+swap limit. To know whether reclaim should swap or not, there is a state flag that indicates whether the limits are equal and whether hitting the memory limit implies hitting the memory+swap limit. Just try the memory+swap counter first. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
-
Michal Hocko authored
free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b84301 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by:Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
cat /sys/.../pools followed by removal the device leads to: |====================================================== |[ INFO: possible circular locking dependency detected ] |3.17.0-rc4+ #1498 Not tainted |------------------------------------------------------- |rmmod/2505 is trying to acquire lock: | (s_active#28){++++.+}, at: [<c017f754>] kernfs_remove_by_name_ns+0x3c/0x88 | |but task is already holding lock: | (pools_lock){+.+.+.}, at: [<c011494c>] dma_pool_destroy+0x18/0x17c | |which lock already depends on the new lock. |the existing dependency chain (in reverse order) is: | |-> #1 (pools_lock){+.+.+.}: | [<c0114ae8>] show_pools+0x30/0xf8 | [<c0313210>] dev_attr_show+0x1c/0x48 | [<c0180e84>] sysfs_kf_seq_show+0x88/0x10c | [<c017f960>] kernfs_seq_show+0x24/0x28 | [<c013efc4>] seq_read+0x1b8/0x480 | [<c011e820>] vfs_read+0x8c/0x148 | [<c011ea10>] SyS_read+0x40/0x8c | [<c000e960>] ret_fast_syscall+0x0/0x48 | |-> #0 (s_active#28){++++.+}: | [<c017e9ac>] __kernfs_remove+0x258/0x2ec | [<c017f754>] kernfs_remove_by_name_ns+0x3c/0x88 | [<c0114a7c>] dma_pool_destroy+0x148/0x17c | [<c03ad288>] hcd_buffer_destroy+0x20/0x34 | [<c03a4780>] usb_remove_hcd+0x110/0x1a4 The problem is the lock order of pools_lock and kernfs_mutex in dma_pool_destroy() vs show_pools() call path. This patch breaks out the creation of the sysfs file outside of the pools_lock mutex. The newly added pools_reg_lock ensures that there is no race of create vs destroy code path in terms whether or not the sysfs file has to be deleted (and was it deleted before we try to create a new one) and what to do if device_create_file() failed. Signed-off-by:Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Vladimir Davydov authored
`While growing per memcg caches arrays, we jump between memcontrol.c and slab_common.c in a weird way: memcg_alloc_cache_id - memcontrol.c memcg_update_all_caches - slab_common.c memcg_update_cache_size - memcontrol.c There's absolutely no reason why memcg_update_cache_size can't live on the slab's side though. So let's move it there and settle it comfortably amid per-memcg cache allocation functions. Besides, this patch cleans this function up a bit, removing all the useless comments from it, and renames it to memcg_update_cache_params to conform to memcg_alloc/free_cache_params, which we already have in slab_common.c. Signed-off-by: -
Vladimir Davydov authored
memcg_update_all_caches grows arrays of per-memcg caches, so we only need to call it when memcg_limited_groups_array_size is increased. However, currently we invoke it each time a new kmem-active memory cgroup is created. Then it just iterates over all slab_caches and does nothing (memcg_update_cache_size returns immediately). This patch fixes this insanity. In the meantime it moves the code dealing with id allocations to separate functions, memcg_alloc_cache_id and memcg_free_cache_id. Signed-off-by:
-
Vladimir Davydov authored
The only reason why they live in memcontrol.c is that we get/put css reference to the owner memory cgroup in them. However, we can do that in memcg_{un,}register_cache. OTOH, there are several reasons to move them to slab_common.c. First, I think that the less public interface functions we have in memcontrol.h the better. Since the functions I move don't depend on memcontrol, I think it's worth making them private to slab, especially taking into account that the arrays are defined on the slab's side too. Second, the way how per-memcg arrays are updated looks rather awkward: it proceeds from memcontrol.c (__memcg_activate_kmem) to slab_common.c (memcg_update_all_caches) and back to memcontrol.c again (memcg_update_array_size). In the following patches I move the function relocating the arrays (memcg_update_array_size) to slab_common.c and therefore get rid this circular call path. I think we should have the cache allocation stuff in the same place where we have relocation, because it's easier to follow the code then. So I move arrays alloc/free functions to slab_common.c too. The third point isn't obvious. I'm going to make the list_lru structure per-memcg to allow targeted kmem reclaim. That means we will have per-memcg arrays in list_lrus too. It turns out that it's much easier to update these arrays in list_lru.c rather than in memcontrol.c, because all the stuff we need is defined there. This patch makes memcg caches arrays allocation path conform that of the upcoming list_lru. So let's move these functions to slab_common.c and make them static. Signed-off-by: -
Andrew Morton authored
- s/KERN_ALERT/pr_emerg/: we're going BUG so let's maximize the changes of getting the message out. - convert debug.c to pr_foo() Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Sasha Levin authored
Dump the contents of the relevant struct_mm when we hit the bug condition. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Sasha Levin authored
Very similar to VM_BUG_ON_PAGE and VM_BUG_ON_VMA, dump struct_mm when the bug is hit. [akpm@linux-foundation.org: coding-style fixes] [mhocko@suse.cz: fix build] [mhocko@suse.cz: fix build some more] [akpm@linux-foundation.org: do strange things to avoid doing strange things for the comma separators] Signed-off-by:
-
Sasha Levin authored
dump_page() and dump_vma() are not specific to page_alloc.c, move them out so page_alloc.c won't turn into the unofficial debug repository. Signed-off-by:
-
Peter Feiner authored
If a /proc/pid/pagemap read spans a [VMA, an unmapped region, then a VM_SOFTDIRTY VMA], the virtual pages in the unmapped region are reported as softdirty. Here's a program to demonstrate the bug: int main() { const uint64_t PAGEMAP_SOFTDIRTY = 1ul << 55; uint64_t pme[3]; int fd = open("/proc/self/pagemap", O_RDONLY);; char *m = mmap(NULL, 3 * getpagesize(), PROT_READ, MAP_ANONYMOUS | MAP_SHARED, -1, 0); munmap(m + getpagesize(), getpagesize()); pread(fd, pme, 24, (unsigned long) m / getpagesize() * 8); assert(pme[0] & PAGEMAP_SOFTDIRTY); /* passes */ assert(!(pme[1] & PAGEMAP_SOFTDIRTY)); /* fails */ assert(pme[2] & PAGEMAP_SOFTDIRTY); /* passes */ return 0; } (Note that all pages in new VMAs are softdirty until cleared). Tested: Used the program given above. I'm going to include this code in a selftest in the future. [n-horiguchi@ah.jp.nec.com: prevent pagemap_pte_range() from overrunning] Signed-off-by:Peter Feiner <pfeiner@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Mel Gorman authored
Zones are allocated by the page allocator in either node or zone order. Node ordering is preferred in terms of locality and is applied automatically in one of three cases: 1. If a node has only low memory 2. If DMA/DMA32 is a high percentage of memory 3. If low memory on a single node is greater than 70% of the node size Otherwise zone ordering is used to preserve low memory for devices that require it. Unfortunately a consequence of this is that applications running on a machine with balanced NUMA nodes will experience different performance characteristics depending on which node they happen to start from. The point of zone ordering is to protect lower zones for devices that require DMA/DMA32 memory. When NUMA was first introduced, this was critical as 32-bit NUMA machines existed and exhausting low memory triggered OOMs easily as so many allocations required low memory. On 64-bit machines the primary concern is devices that are 32-bit only which is less severe than the low memory exhaustion problem on 32-bit NUMA. It seems there are really few devices that depends on it. AGP -- I assume this is getting more rare but even then I think the allocations happen early in boot time where lowmem pressure is less of a problem DRM -- If the device is 32-bit only then there may be low pressure. I didn't evaluate these in detail but it looks like some of these are mobile graphics card. Not many NUMA laptops out there. DRM folk should know better though. Some TV cards -- Much demand for 32-bit capable TV cards on NUMA machines? B43 wireless card -- again not really a NUMA thing. I cannot find a good reason to incur a performance penalty on all 64-bit NUMA machines in case someone throws a brain damanged TV or graphics card in there. This patch defaults to node-ordering on 64-bit NUMA machines. I was tempted to make it default everywhere but I understand that some embedded arches may be using 32-bit NUMA where I cannot predict the consequences. The performance impact depends on the workload and the characteristics of the machine and the machine I tested on had a large Normal zone on node 0 so the impact is within the noise for the majority of tests. The allocation stats show more allocation requests were from DMA32 and local node. Running SpecJBB with multiple JVMs and automatic NUMA balancing disabled the results were specjbb 3.17.0-rc2 3.17.0-rc2 vanilla nodeorder-v1r1 Min 1 29534.00 ( 0.00%) 30020.00 ( 1.65%) Min 10 115717.00 ( 0.00%) 134038.00 ( 15.83%) Min 19 109718.00 ( 0.00%) 114186.00 ( 4.07%) Min 28 104459.00 ( 0.00%) 103639.00 ( -0.78%) Min 37 98245.00 ( 0.00%) 103756.00 ( 5.61%) Min 46 97198.00 ( 0.00%) 96197.00 ( -1.03%) Mean 1 30953.25 ( 0.00%) 31917.75 ( 3.12%) Mean 10 124432.50 ( 0.00%) 140904.00 ( 13.24%) Mean 19 116033.50 ( 0.00%) 119294.75 ( 2.81%) Mean 28 108365.25 ( 0.00%) 106879.50 ( -1.37%) Mean 37 102984.75 ( 0.00%) 106924.25 ( 3.83%) Mean 46 100783.25 ( 0.00%) 105368.50 ( 4.55%) Stddev 1 1260.38 ( 0.00%) 1109.66 ( 11.96%) Stddev 10 7434.03 ( 0.00%) 5171.91 ( 30.43%) Stddev 19 8453.84 ( 0.00%) 5309.59 ( 37.19%) Stddev 28 4184.55 ( 0.00%) 2906.63 ( 30.54%) Stddev 37 5409.49 ( 0.00%) 3192.12 ( 40.99%) Stddev 46 4521.95 ( 0.00%) 7392.52 (-63.48%) Max 1 32738.00 ( 0.00%) 32719.00 ( -0.06%) Max 10 136039.00 ( 0.00%) 148614.00 ( 9.24%) Max 19 130566.00 ( 0.00%) 127418.00 ( -2.41%) Max 28 115404.00 ( 0.00%) 111254.00 ( -3.60%) Max 37 112118.00 ( 0.00%) 111732.00 ( -0.34%) Max 46 108541.00 ( 0.00%) 116849.00 ( 7.65%) TPut 1 123813.00 ( 0.00%) 127671.00 ( 3.12%) TPut 10 497730.00 ( 0.00%) 563616.00 ( 13.24%) TPut 19 464134.00 ( 0.00%) 477179.00 ( 2.81%) TPut 28 433461.00 ( 0.00%) 427518.00 ( -1.37%) TPut 37 411939.00 ( 0.00%) 427697.00 ( 3.83%) TPut 46 403133.00 ( 0.00%) 421474.00 ( 4.55%) 3.17.0-rc2 3.17.0-rc2 vanillanodeorder-v1r1 DMA allocs 0 0 DMA32 allocs 57 1491992 Normal allocs 32543566 30026383 Movable allocs 0 0 Direct pages scanned 0 0 Kswapd pages scanned 0 0 Kswapd pages reclaimed 0 0 Direct pages reclaimed 0 0 Kswapd efficiency 100% 100% Kswapd velocity 0.000 0.000 Direct efficiency 100% 100% Direct velocity 0.000 0.000 Percentage direct scans 0% 0% Zone normal velocity 0.000 0.000 Zone dma32 velocity 0.000 0.000 Zone dma velocity 0.000 0.000 THP fault alloc 55164 52987 THP collapse alloc 139 147 THP splits 26 21 NUMA alloc hit 4169066 4250692 NUMA alloc miss 0 0 Note that there were more DMA32 allocations with the patch applied. In this particular case there was no difference in numa_hit and numa_miss. The expectation is that DMA32 was being used at the low watermark instead of falling into the slow path. kswapd was not woken but it's not worken for THP allocations. On 32-bit, this patch defaults to zone-ordering as low memory depletion can be a serious problem on 32-bit large memory machines. If the default ordering was node then processes on node 0 will deplete the Normal zone due to normal activity. The problem is worse if CONFIG_HIGHPTE is not set. If combined with large amounts of dirty/writeback pages in Normal zone then there is also a high risk of OOM. The heuristics are removed as it's not clear they were ever important on 32-bit. They were only relevant for setting node-ordering on 64-bit. Signed-off-by:Mel Gorman <mgorman@suse.de> Acked-by:
-
Mel Gorman authored
Since 2.6.24 there has been a paranoid check in move_freepages that looks up the zone of two pages. This is a very slow path and the only time I've seen this bug trigger recently is when memory initialisation was broken during patch development. Despite the fact it's a slow path, this patch converts the check to a VM_BUG_ON anyway as it has served its purpose by now. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
Xue jiufei authored
Fix a deadlock problem caused by direct memory reclaim in o2net_wq. The situation is as follows: 1) Receive a connect message from another node, node queues a work_struct o2net_listen_work. 2) o2net_wq processes this work and call the following functions: o2net_wq -> o2net_accept_one -> sock_create_lite -> sock_alloc() -> kmem_cache_alloc with GFP_KERNEL -> ____cache_alloc_node ->__alloc_pages_nodemask -> do_try_to_free_pages -> shrink_slab -> evict -> ocfs2_evict_inode -> ocfs2_drop_lock -> dlmunlock -> o2net_send_message_vec then o2net_wq wait for the unlock reply from master. 3) tcp layer received the reply, call o2net_data_ready() and queue sc_rx_work, waiting o2net_wq to process this work. 4) o2net_wq is a single thread workqueue, it process the work one by one. Right now it is still doing o2net_listen_work and cannot handle sc_rx_work. so we deadlock. Junxiao Bi's patch "mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set" (http://ozlabs.org/~akpm/mmots/broken-out/mm-clear-__gfp_fs-when-pf_memalloc_noio-is-set.patch) clears __GFP_FS in memalloc_noio_flags() besides __GFP_IO. We use memalloc_noio_save() to set process flag PF_MEMALLOC_NOIO so that all allocations done by this process are done as if GFP_NOIO was specified. We are not reentering filesystem while doing memory reclaim. Signed-off-by:joyce.xue <xuejiufei@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Junxiao Bi authored
commit 21caf2fc ("mm: teach mm by current context info to not do I/O during memory allocation") introduces PF_MEMALLOC_NOIO flag to avoid doing I/O inside memory allocation, __GFP_IO is cleared when this flag is set, but __GFP_FS implies __GFP_IO, it should also be cleared. Or it may still run into I/O, like in superblock shrinker. And this will make the kernel run into the deadlock case described in that commit. See Dave Chinner's comment about io in superblock shrinker: Filesystem shrinkers do indeed perform IO from the superblock shrinker and have for years. Even clean inodes can require IO before they can be freed - e.g. on an orphan list, need truncation of post-eof blocks, need to wait for ordered operations to complete before it can be freed, etc. IOWs, Ext4, btrfs and XFS all can issue and/or block on arbitrary amounts of IO in the superblock shrinker context. XFS, in particular, has been doing transactions and IO from the VFS inode cache shrinker since it was first introduced.... Fix this by clearing __GFP_FS in memalloc_noio_flags(), this function has masked all the gfp_mask that will be passed into fs for the processes setting PF_MEMALLOC_NOIO in the direct reclaim path. v1 thread at: https://lkml.org/lkml/2014/9/3/32Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: joyce.xue <xuejiufei@huawei.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xiubo Li authored
C mm/compaction.o mm/compaction.c: In function isolate_freepages_block: mm/compaction.c:364:37: warning: flags may be used uninitialized in this function [-Wmaybe-uninitialized] && compact_unlock_should_abort(&cc->zone->lock, flags, ^ Signed-off-by:Xiubo Li <Li.Xiubo@freescale.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Andrew Morton authored
- be consistent in printing the test which failed - one message was actually wrong (a<b != b>a) - don't print second bogus warning if browse_rb() failed Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Johannes Weiner authored
Page reclaim tests zone_is_reclaim_dirty(), but the site that actually sets this state does zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY), sending the reader through layers indirection just to track down a simple bit. Remove all zone flag wrappers and just use bitops against zone->flags directly. It's just as readable and the lines are barely any longer. Also rename ZONE_TAIL_LRU_DIRTY to ZONE_DIRTY to match ZONE_WRITEBACK, and remove the zone_flags_t typedef. Signed-off-by:
-
Mark Rustad authored
Nested calls to min/max functions result in shadow warnings in W=2 builds. Avoid the warning by using the min3 and max3 macros to get the min/max of 3 values instead of nested calls. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Weijie Yang authored
When entering the page_alloc slowpath, we wakeup kswapd on every pgdat according to the zonelist and high_zoneidx. However, this doesn't take nodemask into account, and could prematurely wakeup kswapd on some unintended nodes. This patch uses for_each_zone_zonelist_nodemask() instead of for_each_zone_zonelist() in wake_all_kswapds() to avoid the above situation. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Acked-by:
-
Sasha Levin authored
Trivially convert a few VM_BUG_ON calls to VM_BUG_ON_VMA to extract more information when they trigger. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Sasha Levin authored
Very similar to VM_BUG_ON_PAGE but dumps VMA information instead. Signed-off-by:
-
Sasha Levin authored
Introduce a helper to dump information about a VMA, this also makes dump_page_flags more generic and re-uses that so the output looks very similar to dump_page: [ 61.903437] vma ffff88070f88be00 start 00007fff25970000 end 00007fff25992000 [ 61.903437] next ffff88070facd600 prev ffff88070face400 mm ffff88070fade000 [ 61.903437] prot 8000000000000025 anon_vma ffff88070fa1e200 vm_ops (null) [ 61.903437] pgoff 7ffffffdd file (null) private_data (null) [ 61.909129] flags: 0x100173(read|write|mayread|maywrite|mayexec|growsdown|account) [akpm@linux-foundation.org: make dump_vma() require CONFIG_DEBUG_VM] [swarren@nvidia.com: fix dump_vma() compilation] Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Rob Jones authored
Using __seq_open_private() removes boilerplate code from slabstats_open() The resultant code is shorter and easier to follow. This patch does not change any functionality. Signed-off-by:
Rob Jones <rob.jones@codethink.co.uk> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Rob Jones authored
Using seq_open_private() removes boilerplate code from vmalloc_open(). The resultant code is shorter and easier to follow. However, please note that seq_open_private() call kzalloc() rather than kmalloc() which may affect timing due to the memory initialisation overhead. Signed-off-by:
-
Andrew Morton authored
This is designed to avoid a few ifdefs in .c files but it's obnoxious because it can cause unsuspecting "migrate_page" symbols to get turned into "NULL". Just nuke it and use the ifdefs. Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Oleg Nesterov authored
- get_vma_policy(task) is not safe if task != current, remove this argument. - get_vma_policy() no longer has callers outside of mempolicy.c, make it static. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Oleg Nesterov authored
Remove down_write(&mm->mmap_sem) in do_set_mempolicy(). This logic was never correct and it is no longer needed, see the previous patch. Signed-off-by:
-
Oleg Nesterov authored
9e781440 "hold task->mempolicy while numa_maps scans." fixed the race with the exiting task but this is not enough. The current code assumes that get_vma_policy(task) should either see task->mempolicy == NULL or it should be equal to ->task_mempolicy saved by hold_task_mempolicy(), so we can never race with __mpol_put(). But this can only work if we can't race with do_set_mempolicy(), and thus we can't race with another do_set_mempolicy() or do_exit() after that. However, do_set_mempolicy()->down_write(mmap_sem) can not prevent this race. This task can exec, change it's ->mm, and call do_set_mempolicy() after that; in this case they take 2 different locks. Change hold_task_mempolicy() to use get_task_policy(), it never returns NULL, and change show_numa_map() to use __get_vma_policy() or fall back to proc_priv->task_mempolicy. Note: this is the minimal fix, we will cleanup this code later. I think hold_task_mempolicy() and release_task_mempolicy() should die, we can move this logic into show_numa_map(). Or we can move get_task_policy() outside of ->mmap_sem and !CONFIG_NUMA code at least. Signed-off-by:
-
Oleg Nesterov authored
Extract the code which looks for vma's policy from get_vma_policy() into the new helper, __get_vma_policy(). Export get_task_policy(). Signed-off-by:
-
Oleg Nesterov authored
1. vma_policy_mof(task) is simply not safe unless task == current, it can race with do_exit()->mpol_put(). Remove this arg and update its single caller. 2. vma can not be NULL, remove this check and simplify the code. Signed-off-by:
-
Oleg Nesterov authored
Cleanup + preparation. Every user of get_task_policy() calls it unconditionally, even if it is not going to use the result. get_task_policy() is cheap but still this does not look clean, plus the code looks simpler if get_task_policy() is called only when this is really needed. Note: I hope this is correct, but it is not clear why vma_policy_mof() doesn't fall back to get_task_policy() if ->get_policy() returns NULL. Signed-off-by:
-
Oleg Nesterov authored
Every caller of get_task_policy() falls back to default_policy if it returns NULL. Change get_task_policy() to do this. Signed-off-by:
-
Oleg Nesterov authored
Trivial cleanup. alloc_pages_vma() can use mpol_cond_put(). Signed-off-by:
-
Johannes Weiner authored
The deprecation warnings for the scan_unevictable interface triggers by scripts doing `sysctl -a | grep something else'. This is annoying and not helpful. The interface has been defunct since 264e56d8 ("mm: disable user interface to manually rescue unevictable pages"), which was in 2011, and there haven't been any reports of usecases for it, only reports that the deprecation warnings are annying. It's unlikely that anybody is using this interface specifically at this point, so remove it. Signed-off-by:
-
Cyrill Gorcunov authored
During development of c/r we've noticed that in case if we need to support user namespaces we face a problem with capabilities in prctl(PR_SET_MM, ...) call, in particular once new user namespace is created capable(CAP_SYS_RESOURCE) no longer passes. A approach is to eliminate CAP_SYS_RESOURCE check but pass all new values in one bundle, which would allow the kernel to make more intensive test for sanity of values and same time allow us to support checkpoint/restore of user namespaces. Thus a new command PR_SET_MM_MAP introduced. It takes a pointer of prctl_mm_map structure which carries all the members to be updated. prctl(PR_SET_MM, PR_SET_MM_MAP, struct prctl_mm_map *, size) struct prctl_mm_map { __u64 start_code; __u64 end_code; __u64 start_data; __u64 end_data; __u64 start_brk; __u64 brk; __u64 start_stack; __u64 arg_start; __u64 arg_end; __u64 env_start; __u64 env_end; __u64 *auxv; __u32 auxv_size; __u32 exe_fd; }; All members except @exe_fd correspond ones of struct mm_struct. To figure out which available values these members may take here are meanings of the members. - start_code, end_code: represent bounds of executable code area - start_data, end_data: represent bounds of data area - start_brk, brk: used to calculate bounds for brk() syscall - start_stack: used when accounting space needed for command line arguments, environment and shmat() syscall - arg_start, arg_end, env_start, env_end: represent memory area supplied for command line arguments and environment variables - auxv, auxv_size: carries auxiliary vector, Elf format specifics - exe_fd: file descriptor number for executable link (/proc/self/exe) Thus we apply the following requirements to the values 1) Any member except @auxv, @auxv_size, @exe_fd is rather an address in user space thus it must be laying inside [mmap_min_addr, mmap_max_addr) interval. 2) While @[start|end]_code and @[start|end]_data may point to an nonexisting VMAs (say a program maps own new .text and .data segments during execution) the rest of members should belong to VMA which must exist. 3) Addresses must be ordered, ie @start_ member must not be greater or equal to appropriate @end_ member. 4) As in regular Elf loading procedure we require that @start_brk and @brk be greater than @end_data. 5) If RLIMIT_DATA rlimit is set to non-infinity new values should not exceed existing limit. Same applies to RLIMIT_STACK. 6) Auxiliary vector size must not exceed existing one (which is predefined as AT_VECTOR_SIZE and depends on architecture). 7) File descriptor passed in @exe_file should be pointing to executable file (because we use existing prctl_set_mm_exe_file_locked helper it ensures that the file we are going to use as exe link has all required permission granted). Now about where these members are involved inside kernel code: - @start_code and @end_code are used in /proc/$pid/[stat|statm] output; - @start_data and @end_data are used in /proc/$pid/[stat|statm] output, also they are considered if there enough space for brk() syscall result if RLIMIT_DATA is set; - @start_brk shown in /proc/$pid/stat output and accounted in brk() syscall if RLIMIT_DATA is set; also this member is tested to find a symbolic name of mmap event for perf system (we choose if event is generated for "heap" area); one more aplication is selinux -- we test if a process has PROCESS__EXECHEAP permission if trying to make heap area being executable with mprotect() syscall; - @brk is a current value for brk() syscall which lays inside heap area, it's shown in /proc/$pid/stat. When syscall brk() succesfully provides new memory area to a user space upon brk() completion the mm::brk is updated to carry new value; Both @start_brk and @brk are actively used in /proc/$pid/maps and /proc/$pid/smaps output to find a symbolic name "heap" for VMA being scanned; - @start_stack is printed out in /proc/$pid/stat and used to find a symbolic name "stack" for task and threads in /proc/$pid/maps and /proc/$pid/smaps output, and as the same as with @start_brk -- perf system uses it for event naming. Also kernel treat this member as a start address of where to map vDSO pages and to check if there is enough space for shmat() syscall; - @arg_start, @arg_end, @env_start and @env_end are printed out in /proc/$pid/stat. Another access to the data these members represent is to read /proc/$pid/environ or /proc/$pid/cmdline. Any attempt to read these areas kernel tests with access_process_vm helper so a user must have enough rights for this action; - @auxv and @auxv_size may be read from /proc/$pid/auxv. Strictly speaking kernel doesn't care much about which exactly data is sitting there because it is solely for userspace; - @exe_fd is referred from /proc/$pid/exe and when generating coredump. We uses prctl_set_mm_exe_file_locked helper to update this member, so exe-file link modification remains one-shot action. Still note that updating exe-file link now doesn't require sys-resource capability anymore, after all there is no much profit in preventing setup own file link (there are a number of ways to execute own code -- ptrace, ld-preload, so that the only reliable way to find which exactly code is executed is to inspect running program memory). Still we require the caller to be at least user-namespace root user. I believe the old interface should be deprecated and ripped off in a couple of kernel releases if no one against. To test if new interface is implemented in the kernel one can pass PR_SET_MM_MAP_SIZE opcode and the kernel returns the size of currently supported struct prctl_mm_map. [akpm@linux-foundation.org: fix 80-col wordwrap in macro definitions] Signed-off-by:Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Acked-by:
Andrew Vagin <avagin@openvz.org> Tested-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by:
-
Cyrill Gorcunov authored
Instead of taking mm->mmap_sem inside prctl_set_mm_exe_file() move it out and rename the helper to prctl_set_mm_exe_file_locked(). This will allow to reuse this function in a next patch. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
