- 25 Sep, 2018 20 commits
-
-
Yishai Hadas authored
Set uid as part of CQ creation so that the firmware can manage the CQ object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a CQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of PD allocation, this uid is used for other mlx5 objects upon calling the firmware. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of RQT commands so that the firmware can manage the RQT object in a secured way. That will enable using an RQT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of TIS commands so that the firmware can manage the TIS object in a secured way. That will enable using a TIS that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of TIR commands so that the firmware can manage the TIR object in a secured way. That will enable using a TIR that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of MCG commands so that the firmware can manage the MCG object in a secured way. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of DCT create command so that the firmware can manage the DCT object in a secured way. The uid for the destroy and drain commands are set by mlx5_core. That will enable using a DCT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SRQ create command so that the firmware can manage the SRQ object in a secured way. The uid for the destroy and modify commands are set by mlx5_core. That will enable using a SRQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SQ commands so that the firmware can manage the SQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an SQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of RQ commands so that the firmware can manage the RQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an RQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of QP creation so that the firmware can manage the QP object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a QP that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Use uid as part of PD commands so that the firmware can manage the PD object in a secured way. For example when a QP is created its uid must match the CQ uid which it uses. Next patches in this series will use the uid from the PD, then will come a patch to set the uid on the PD so that all objects will be properly work in one change. Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git This is required to resolve dependencies of the next series of RDMA patches. * branch 'mellanox/mlx5-next': net/mlx5: Update mlx5_ifc with DEVX UID bits net/mlx5: Set uid as part of DCT commands net/mlx5: Set uid as part of SRQ commands net/mlx5: Set uid as part of SQ commands net/mlx5: Set uid as part of RQ commands net/mlx5: Set uid as part of QP commands net/mlx5: Set uid as part of CQ commands Signed-off-by:
-
Leon Romanovsky authored
Add DEVX information to WQ, SRQ, CQ, TIR, TIS, QP, RQ, XRCD, PD, MKEY and MCG. Each object that is created/destroyed/modified via verbs will be stamped with a UID based on its user context. This is already done for DEVX objects commands. This will enable the firmware to enforce the usage of kernel objects from the DEVX flow by validating that the same UID is used and the resources are really related to the same user. The addition of *_valid fields are needed to distinguish how various addresses are passed. For non-DEVX callers, all those fields will be zero. Signed-off-by: -
Yishai Hadas authored
Set uid as part of DCT commands so that the firmware can manage the DCT object in a secured way. That will enable using a DCT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SRQ commands so that the firmware can manage the SRQ object in a secured way. That will enable using an SRQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SQ commands so that the firmware can manage the SQ object in a secured way. That will enable using an SQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of RQ commands so that the firmware can manage the RQ object in a secured way. That will enable using an RQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of QP commands so that the firmware can manage the QP object in a secured way. That will enable using a QP that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of CQ commands so that the firmware can manage the CQ object in a secured way. The firmware should mark this CQ with the given uid so that it can be used later on only by objects with the same uid. Upon DEVX flows that use this CQ (e.g. create QP command), the pointed CQ must have the same uid as of the issuer uid command. When a command is issued with uid=0 it means that the issuer of the command is trusted (i.e. kernel), in that case any pointed object can be used regardless of its uid. Signed-off-by:
-
- 22 Sep, 2018 4 commits
-
-
Doug Ledford authored
For dependencies, branch based on 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky: ==================== This is short series from Mark which extends handling of loopback traffic. Originally mlx5 IB dynamically enabled/disabled both unicast and multicast based on number of users. However RAW ethernet QPs need more granular access. ==================== Fixed failed automerge in mlx5_ib.h (minor context conflict issue) mlx5-vport-loopback branch: RDMA/mlx5: Enable vport loopback when user context or QP mandate RDMA/mlx5: Allow creating RAW ethernet QP with loopback support RDMA/mlx5: Refactor transport domain bookkeeping logic net/mlx5: Rename incorrect naming in IFC file Signed-off-by:Doug Ledford <dledford@redhat.com>
-
Mark Bloch authored
A user can create a QP which can accept loopback traffic, but that's not enough. We need to enable loopback on the vport as well. Currently vport loopback is enabled only when more than 1 users are using the IB device, update the logic to consider whatever a QP which supports loopback was created, if so enable vport loopback even if there is only a single user. Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
-
Mark Bloch authored
Expose two new flags: MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC Those flags can be used at creation time in order to allow a QP to be able to receive loopback traffic (unicast and multicast). We store the state in the QP to be used on the destroy path to indicate with which flags the QP was created with. Signed-off-by:
-
Mark Bloch authored
In preparation to enable loopback on a single user context move the logic that enables/disables loopback to separate functions and group variables under a single struct. Signed-off-by:
-
- 21 Sep, 2018 13 commits
-
-
Mark Bloch authored
Remove a trailing underscore from the multicast/unicast names. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when more than one set of parentheses are used in single conditional statements. drivers/infiniband/hw/mlx4/mcg.c:676:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((method == IB_MGMT_METHOD_GET_RESP)) { ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mcg.c:676:16: note: remove extraneous parentheses around the comparison to silence this warning if ((method == IB_MGMT_METHOD_GET_RESP)) { ~ ^ ~ drivers/infiniband/hw/mlx4/mcg.c:676:16: note: use '=' to turn this equality comparison into an assignment if ((method == IB_MGMT_METHOD_GET_RESP)) { ^~ = Remove the unnecessary parentheses to silence this warning. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Nathan Chancellor authored
Clang warns when more than one set of parentheses are used in single conditional statements. drivers/infiniband/hw/nes/nes_hw.c:1446:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] } while ((temp_phy_data2 == temp_phy_data)); ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: remove extraneous parentheses around the comparison to silence this warning } while ((temp_phy_data2 == temp_phy_data)); ~ ^ ~ drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: use '=' to turn this equality comparison into an assignment } while ((temp_phy_data2 == temp_phy_data)); ^~ = Remove the unnecessary parentheses to silence this warning. Reported-by: -
Jason Gunthorpe authored
Nothing uses this now, just delete it. Signed-off-by:
-
Jason Gunthorpe authored
synchronize_rcu is slow enough that it should be avoided on the syscall path when user space is destroying MRs. After all the rework we can now trivially do this by having call_srcu kfree the per_mm. Signed-off-by:
-
Jason Gunthorpe authored
mmu_notifier_unregister() can race between a invalidate_start/end and cause the invalidate_end to be skipped. This causes an imbalance in the locking, which lockdep complains about. This is not actually a bug, as we immediately kfree the memory holding the lock, but it simple enough to fix. Mark when the notifier is being destroyed and abort the start callback. This can be done under the lock we already obtained, and can re-purpose the invalidate_range test we already have. Signed-off-by:
-
Jason Gunthorpe authored
This is intrinsically racy and the scheme is simply unnecessary. New MR registration can wait for any on going invalidation to fully complete. CPU0 CPU1 if (atomic_read()) if (atomic_dec_and_test() && !list_empty()) { /* not taken */ } list_add() Putting the new UMEM into some kind of purgatory until another invalidate rolls through.. Instead hold the read side of the umem_rwsem across the pair'd start/end and get rid of the racy 'deferred add' approach. Since all umem's in the rbt are always ready to go, also get rid of the mn_counters_active stuff. Signed-off-by: -
Jason Gunthorpe authored
Since ODP had a single struct mmu_notifier located in the ucontext it could only handle a single MM at a time, and this prevented it from using the new owning_mm system. With the prior rework it is now simple to let ODP track multiple MMs per ucontext, finish the job so that the per_mm is allocated on a mm by mm basis, and freed when the last umem is dropped from the ucontext. As a side effect the new saner locking removes the lockdep splat about nesting the umem_rwsem between mmu_notifier_unregister and ib_umem_odp_release. It also makes ODP work with multiple processes, across, fork, etc. Signed-off-by:
-
Jason Gunthorpe authored
This is the first step to make ODP use the owning_mm that is now part of struct ib_umem. Each ODP umem is linked to a single per_mm structure, which in turn, is linked to a single mm, via the embedded mmu_notifier. This first patch introduces the structure and reworks eveything to use it. This also needs to introduce tgid into the ib_ucontext_per_mm, as get_user_pages_remote() requires the originating task for statistics tracking. Signed-off-by:
-
Jason Gunthorpe authored
This no longer has any use, we can use container_of to get to the umem_odp, and a simple flag to indicate if this is an odp MR. Remove the few remaining references to it. Signed-off-by:
-
Jason Gunthorpe authored
These two structures are linked together, use the container_of pattern instead of a double allocation to make the code simpler and easier to follow. Signed-off-by:
-
Jason Gunthorpe authored
All of these functions already require the ODP version of the umem struct, make this very clear by having the signature require it. This paves the way to using the container_of() pattern to link umem_odp and umem together. Signed-off-by:
-
- 20 Sep, 2018 3 commits
-
-
Jason Gunthorpe authored
Update this driver to match the code it copies from umem.c which no longer uses tgid. Signed-off-by:
-
Jason Gunthorpe authored
This is just wrong, the process that calls into the reg_mr is the process associated with the umem, and that does not have to be the same process that created the context. When this code was first written mmgrab() didn't exist, however these days we can just directly hold the mm_struct pointer in the umem and have no ambiguity when it comes to releasing the umem as to which mm it was associated with. Signed-off-by:
-
Jason Gunthorpe authored
The disassociate_ucontext function in every driver is now empty, so we don't need this ugly and wrong code that was messing with tgids. rdma_user_mmap_io does this same work in a better way. Signed-off-by:
-
