Processes that open and close multiple files may end up setting this
oo_last_closed_stid without freeing what was previously pointed to.
This can result in a major leak, visible for example by watching the
nfsd4_stateids line of /proc/slabinfo.
Reported-by: Cyril B. <cbay@excellency.fr>
Tested-by: Cyril B. <cbay@excellency.fr>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

These are only needed by nfs-utils.  But I needed to remind myself how
they worked recently and thought this might be helpful.  It's short and
incomplete for now as I was only interested in startup, shutdown, and
configuration of listening sockets.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Move initialization of newly accepted socket into a helper.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Matter of taste, I suppose, but svc_recv breaks up naturally into:

	allocate pages and setup arg
	dequeue (wait for, if necessary) next socket
	do something with that socket

And I find it easier to read when it doesn't go on for pages and pages.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Note this isn't used outside svc_xprt.c.

May as well move it so we don't need a declaration while we're here.

Also remove an outdated comment.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

svc_recv() returns only -EINTR or -EAGAIN.  If we really want to worry
about the case where it has a bug that causes it to return something
else, we could stick a WARN() in svc_recv.  But it's silly to require
every caller to have all this boilerplate to handle that case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The only errors returned from xpo_recvfrom have been -EAGAIN and
-EAFNOSUPPORT.  The latter was removed by a previous patch.  That leaves
only -EAGAIN, which is treated just like 0 by the caller (svc_recv).

So, just ditch -EAGAIN and return 0 instead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

None of the callers should see an unsupported address family (only one
of them even bothers to check for that case), so just check for the
buggy case in svc_addr_len and don't bother elsewhere.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Order the code in a more boring way.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Note a 16-bit value can require up to 5 digits.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

"port" in all these functions is always NFS_PORT.

nfsd can already be run on a nonstandard port using the "nfsd/portlist"
interface.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

There's some duplicate code here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Whenever we clear XPT_BUSY we should call svc_xprt_enqueue().  Without
that we may fail to notice any events (such as new connections) that
arrived while XPT_BUSY was set.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Mainly, use the kernel standard

	err = -ERROR;
	if (something_bad)
		goto out;
	normal case;

rather than

	if (something_bad)
		err = -ERROR
	else {
		normal case;
	}
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Use the kernel-standard ptr-or-error return convention instead of
passing a pointer to the error.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Server threads are not running at this point, but svc_age_temp_xprts
still may be, so we need this locking.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

struct file_lock is pretty large and really ought not live on the stack.
On my x86_64 machine, they're almost 200 bytes each.

    (gdb) p sizeof(struct file_lock)
    $1 = 192

...allocate them dynamically instead.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The code checks for a NULL filp and handles it gracefully just before
this BUG_ON.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

stateid_setter should be matched to op_set_currentstateid, rather than
op_get_currentstateid.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The types here are actually a bit of a mess.  For now cast as we do in
the v4 case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

locks.c doesn't use the BKL anymore and there is no fi_perfile field.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The rules for fl_type are rather convoluted. Typically it's treated as
holding specific values, except in the case of LOCK_MAND, in which case
it can be or'ed with LOCK_READ|LOCK_WRITE.

On some arches F_WRLCK == 2 and F_UNLCK == 3, so and'ing with F_WRLCK will also
catch the F_UNLCK case. It's unlikely in either case here that we'd ever see
F_UNLCK since those shouldn't end up on any lists, but it's still best to be
consistent.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The rpc server tries to ensure that there will be room to send a reply
before it receives a request.

It does this by tracking, in xpt_reserved, an upper bound on the total
size of the replies that is has already committed to for the socket.

Currently it is adding in the estimate for a new reply *before* it
checks whether there is space available.  If it finds that there is not
space, it then subtracts the estimate back out.

This may lead the subsequent svc_xprt_enqueue to decide that there is
space after all.

The results is a svc_recv() that will repeatedly return -EAGAIN, causing
server threads to loop without doing any actual work.

Cc: stable@vger.kernel.org
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply.
However, the XPT_CLOSE won't be acted on immediately.  Meanwhile other
threads could send further replies before the socket is really shut
down.  This can manifest as data corruption: for example, if a truncated
read reply is followed by another rpc reply, that second reply will look
to the client like further read data.

Symptoms were data corruption preceded by svc_tcp_sendto logging
something like

	kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket

Cc: stable@vger.kernel.org
Reported-by: Malahal Naineni <malahal@us.ibm.com>
Tested-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is
consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if
sk_tcplen would lead us to expect n pages of data).

svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen.
This is OK, since both functions are serialized by XPT_BUSY.  However,
that means the inconsistency must be repaired before dropping XPT_BUSY.

Therefore we should be ensuring that svc_tcp_save_pages repairs the
problem before exiting svc_tcp_recv_record on error.

Symptoms were a BUG() in svc_tcp_clear_pages.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Commit d5497fc6 "nfsd4: move rq_flavor
into svc_cred" forgot to remove cl_flavor from the client, leaving two
places (cl_flavor and cl_cred.cr_flavor) for the flavor to be stored.
After that patch, the latter was the one that was updated, but the
former was the one that the callback used.

Symptoms were a long delay on utime().  This is because the utime()
generated a setattr which recalled a delegation, but the cb_recall was
ignored by the client because it had the wrong security flavor.

Cc: stable@vger.kernel.org
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Following a report of a crash during an automount expire I found that
the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong.
Not only is the locking wrong but the function is more complex than it
needs to be.

The function is meant to calculate (and dget) the next entry in the list
of directories contained in the root of an autofs mount point (an autofs
indirect mount to be precise). The main problem was that the d_lock of
the owner of the list was not being taken when walking the list, which
lead to list corruption under load. The only other lock that needs to
be taken is against the next dentry candidate so it can be checked for
usability.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull VFIO fix from Alex Williamson:
 "Just a trivial patch to include vfio.h in the installed headers so we
  can complete userspace integration into QEMU."

* tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Include vfio.h in installed headers

Pull fuse updates from Miklos Szeredi.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: verify all ioctl retry iov elements
  fuse: add missing INIT flag descriptions
  fuse: add missing INIT flags
  fuse: update attributes on aio_read
  fuse: invalidate inode mapping if mtime changes
  fuse: add FUSE_AUTO_INVAL_DATA init flag

Merge tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fix from Konrad Rzeszutek Wilk:
 "Way back in v3.5 we added a mechanism to populate back pages that were
  released (they overlapped with MMIO regions), but neglected to reserve
  the proper amount of virtual space for extend_brk to work properly.

  Coincidentally some other commit aligned the _brk space to larger area
  so I didn't trigger this until it was run on a machine with more than
  2GB of MMIO space."

 * On machines with large MMIO/PCI E820 spaces we fail to boot b/c
   we failed to pre-allocate large enough virtual space for extend_brk.

* tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: intc: Handle domain association for sparseirq pre-allocated vectors.
  sh: sh7269: Fix LCD pinmux
  sh: dma: fix request_irq usage

Moved to djbw@fb.com

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When dumping "Code: " sections from an oops, the trapping instruction
%rip points to can be a string copy

  2b:*  f3 a5                   rep movsl %ds:(%rsi),%es:(%rdi)

and the line contain a bunch of ":".  Current "cut" selects only the and
the second field output looks funnily overlaid this:

  2b:*  f3 a5                   rep movsl %ds     <-- trapping instruction:(%rsi),%es:(%rdi

Fix this by selecting the remaining fields too.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull two slave-dmaengine fixes from Vinod Koul:
 "One fixes the correct use of clock API in imx driver and the other
  enables clock for tegra driver, which is used for other tegra driver
  conversion to dmanegine in -next."

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: tegra: enable/disable dma clock
  dma: imx-dma: Fix kernel crash due to missing clock conversion

Pull more drm fixes from Dave Airlie:
 "Just some intel and nouveau ones this time, intel has more edp panel
  fixes for macbooks and nouveau has a suspend/resume regression fix in
  there."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Apply post-sync write for pipe control invalidates
  drm/i915: reorder edp disabling to fix ivb MacBook Air
  drm/nv86/fifo: suspend fix
  drm/nouveau: disable copy engine on NVAF
  nouveau: fixup scanout enable in nvc0_pm
  drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry
  drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate
  drm/i915: ensure i2c adapter is all set before adding it
  drm/i915: ignore eDP bpc settings from vbt
  drm/i915: Fix blank panel at reopening lid
  drm/nve0/fifo: add support for the flip completion swmthd

Pull two sparc fixes from David S. Miller.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Be less verbose during vmemmap population.
  sparc64: do not clobber personality flags in sys_sparc64_personality()