- 28 Jun, 2011 32 commits
-
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Oren Weil <oren.jer.weil@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tomas Winkler authored
remove write only/unsed variables mei_dev.write_hang and mei_io_lis.tdevice_extension Signed-off-by:
-
Tomas Winkler authored
use type bool for boolean variables in struct mei_dev this should save some space providing boolean is 8 bits Signed-off-by:
-
Tomas Winkler authored
All global functions must start with mei_ to reduce the risk of name colisions Signed-off-by:
-
Tomas Winkler authored
Signed-off-by:
-
Jouni Malinen authored
Implement cfg80211_ops set_pmksa, del_pmksa, and flush_pmksa to enable PMKSA caching support. kvalo: backported from ath6kl-cleanup tree Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Kalle Valo authored
Add testmode support for running low level hardware tests. The testmode is enabled by setting testmode module parameter to 1. For now only a simple command passing is supported. More advanced support will be implemented later. Signed-off-by:
-
Kalle Valo authored
cfg80211 exports wiphy->fw_version to user space via ethtool interface. The obligatory screenshot: $ sudo ethtool -i wlan0 driver: ath6kl_hifdev version: 2.6.39-rc4+ firmware-version: 3:1:1:149 bus-info: mmc0:0001:1 $ Signed-off-by:
-
Jesper Juhl authored
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/staging/ath6kl/. This patch removes them. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Kalle Valo authored
Drivers should not request firmware during resume. Fix ath6kl to cache the firmware instead. Signed-off-by:
-
Kalle Valo authored
When ath6kl module was resumed while a scan was ongoing, for example during suspend, the driver would crash in ar6k_cfg80211_scanComplete_event(): [26581.586440] Call Trace: [26581.586440] [<f99ffeda>] ? ar6k_cfg80211_scanComplete_event+0xaa/0xaa [ath6kl] [26581.586440] [<f9a0a020>] wmi_iterate_nodes+0xb/0xd [ath6kl] [26581.586440] [<f99ffe78>] ar6k_cfg80211_scanComplete_event+0x48/0xaa [ath6kl] [26581.586440] [<f9a038ae>] ar6000_close+0x77/0x7e [ath6kl] [26581.586440] [<c139c25d>] __dev_close_many+0x87/0xab [26581.586440] [<c139c30a>] dev_close_many+0x54/0xab [26581.586440] [<c139c437>] rollback_registered_many+0xa5/0x19e [26581.586440] [<c139c595>] rollback_registered+0x23/0x2f [26581.586440] [<c139c5ed>] unregister_netdevice_queue+0x4c/0x69 [26581.586440] [<c139c6b2>] unregister_netdev+0x18/0x1f [26581.586440] [<f9a00d4c>] ar6000_destroy+0xf8/0x115 [ath6kl] [26581.586440] [<f9a0c765>] ar6k_cleanup_module+0x20/0x29 [ath6kl] [26581.586440] [<c1062843>] sys_delete_module+0x181/0x1d9 [26581.586440] [<c105876b>] ? lock_release_holdtime+0x2b/0xcd [26581.586440] [<c10b55dc>] ? sys_munmap+0x3b/0x42 [26581.586440] [<c14a99dc>] ? restore_all+0xf/0xf [26581.586440] [<c14aeb6c>] sysenter_do_call+0x12/0x32 [26581.586440] Code: 89 53 6c 75 07 89 d8 e8 c0 ff ff ff 89 f0 e8 2c f2 a9 c7 5b 5e 5d c3 55 89 e5 57 56 53 89 c3 83 ec 08 89 55 f0 8d 78 04 89 4d ec <8b> b0 b8 00 00 00 46 89 b0 b8 00 00 00 89 f8 e8 ae ed a9 c7 8b Fix the function not to iterate nodes when the scan is aborted. The nodes are already freed when the module is being unloaded. Patch "ath6kl: Fix a kernel panic furing suspend/resume" tried to fix this already but it wasn't enough as a pointer was still used even after the null check. This patch removes the null check entirely as the wmi structure is not accessed anymore during module unload. Also fix a bug where the status was checked as a bitfield with '&' operator. But it's not a bitfield, just a regular (enum like) value. Signed-off-by:
-
Greg Dietsche authored
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
Greg Dietsche <Gregory.Dietsche@cuw.edu> Acked-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Roland Vossen authored
Change wl_cfg80211_suspend in fullmac to meet cfg80211 interface update. Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Several source files in brcmsmac driver have checkpatch errors that have been removed (see below). ERROR: spaces required around that ':' (ctx:VxV) + (u8)NPHY_RSSI_SEL_TSSI_5G:(u8)NPHY_RSSI_SEL_TSSI_2G; -- ERROR: code indent should use tabs where possible + ^Ierr = initvars_table(base, vp, vars, count);$ -- Signed-off-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The softmac source file main.c was passed through checkpatch to see what issues against coding style are still present. This patch removes the checkpatch errors listed below. ERROR: trailing whitespace +^Imemcpy(wlc->default_bss->rateset.rates, rs.rates, $ -- ERROR: spaces required around that ':' (ctx:VxV) + pval = arg ? (int *)arg:NULL; -- Signed-off-by:
-
Arend van Spriel authored
A checkpatch run was done over the complete source files to determine how much coding style issues there are in the driver. This patch fixes the checkpatch errors in fullmac driver brcmfmac listed below. ERROR: do not initialise globals to 0 or NULL +uint dhd_poll = false; -- ERROR: do not use assignment in if condition + if (!ifp && !(ifp = kmalloc(sizeof(dhd_if_t), GFP_ATOMIC))) { -- ERROR: do not use assignment in if condition + if (unlikely(!(wl_cfg80211_dev && \ -- ERROR: do not initialise statics to 0 or NULL + static bool iscan_pass_abort = false; -- Signed-off-by: -
Roland Vossen authored
Code cleanup. Function renaming. Triggered by feedback comment from John Linville, just like the other function renames that preceded this patch. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Renamed functions. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Signed-off-by:
Julian Calaby <julian.calaby@gmail.com> Reviewed-by:
-
Roland Vossen authored
Code cleanup. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Signed-off-by:
-
Sukesh Srikakula authored
Issue with disconnect at the time of suspend is fixed by properly setting connection status bits maintained by brcmfmac driver. Signed-off-by:
Sukesh Srikakula <sukeshs@broadcom.com> Reviewed-by:
-
Roland Vossen authored
Code cleanup. Removed one redundant include and reshuffled #include order as to include Linux header files first. Reported-by:
julie Sullivan <kernelmail.jms@gmail.com> Signed-off-by:
-
Arend van Spriel authored
Two fields were not used in the driver code so they have been removed from struct si_info definition. Signed-off-by:
-
Arend van Spriel authored
The device id is passed to ai_attach() and subsequent functions without actually being used. It can be removed. Signed-off-by:
-
Arend van Spriel authored
The function wlc_tbtt() has variable regs as parameter, but it is not used. Parameter has been removed from the function. Signed-off-by:
-
Arend van Spriel authored
This variable was declared and initialized but never used so it has been removed. Signed-off-by:
-
Arend van Spriel authored
The function ai_ispcie() is a static function that is currently being called from the c sources in the driver. Side-effect of the keyword is that warning will suppressed when this function is no longer used. As there is no assembly code using this function, the keyword is removed. Signed-off-by:
-
Franky Lin authored
Remove this debug only variable in fullmace driver to avoid compile warning when BCMDBG is off Signed-off-by:
-
Roland Vossen authored
Code cleanup. Number of includes has been reduced by only including what is necessary. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Moved softmac specific definitions into brcmsmac/types.h Removed unused definitions. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Moved the typedefs to brcmsmac/types.h for source files that only require opaque pointer definitions. Next patches will decrease the number of #includes for each file. Signed-off-by:
-
- 09 Jun, 2011 8 commits
-
-
Greg Kroah-Hartman authored
This was done to resolve the conflicts that were in a number of files due to changes done upstream with others done in the staging-next branch. Signed-off-by: -
Greg Kroah-Hartman authored
Right now, bad things happen if you try to build these drivers for the PPC platform as it seems that the code only has been tested and built on the MIPS big endian platform. So disable it on the PPC32 and PPC64 platforms for now, hopefully this will be resolved in the future as I'm sure someone will want to use these chips with that platform someday. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: iio: max517: Fix iio_info changes Staging: mei: fix debug code Staging: cx23885: fix include of altera.h staging: iio: error case memory leak fix staging: ath6kl: Fix a kernel panic during suspend/resume staging: gma500: get control from firmware framebuffer if conflicts staging: gma500: Skip bogus LVDS VBT mode and check for LVDS before adding backlight staging: usbip: bugfix prevent driver unbind staging: iio: industrialio-trigger: set iio_poll_func private_data staging: rts_pstor: use bitwise operator instead of logical one staging: fix ath6kl build when CFG80211 is not enabled staging: brcm80211: fix for 'multiple definition of wl_msg_level' build err staging: fix olpc_dcon build, needs BACKLIGHT_CLASS_DEVICE Staging: remove STAGING_EXCLUDE_BUILD option Staging: altera: move .h file to proper place
-
Linus Torvalds authored
Merge branch 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6 * 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6: swiotlb: Export swioltb_nr_tbl and utilize it as appropiate.
-
Linus Torvalds authored
Merge branch 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: iscsi_ibft: iscsi_ibft_find unused variable i
-
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32Linus Torvalds authored
* 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: unicore32: using generic-y format for one line asm-generic files unicore32: change PERCPU to PERCPU_SECTION unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig) unicore32: change zImage physical address, though it's PIC codes unicore32: move rtc-puv3.c to drivers/rtc directory
-
Joe Perches authored
RFC 5952 (http://tools.ietf.org/html/rfc5952) mandates that 2 or more consecutive 0's are required before using :: compression. Update ip6_compressed_string to match the RFC and update the http reference as well. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mathias Krause authored
Unconditionally changing the address limit to USER_DS and not restoring it to its old value in the error path is wrong because it prevents us using kernel memory on repeated calls to this function. This, in fact, breaks the fallback of hard coded paths to the init program from being ever successful if the first candidate fails to load. With this patch applied switching to USER_DS is delayed until the point of no return is reached which makes it possible to have a multi-arch rootfs with one arch specific init binary for each of the (hard coded) probed paths. Since the address limit is already set to USER_DS when start_thread() will be invoked, this redundancy can be safely removed. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by:
-
