Work around a silicon bug in the ac97 reset functionality of the
mpc5200(b).  The implementation of the ac97 "cold" reset is flawed.
If the sync and output lines are high when reset is asserted the
attached ac97 device may go into test mode.  Avoid this by
reconfiguring the psc to gpio mode and generating the reset manually.

From MPC5200B User's Manual:
"Some AC97 devices goes to a test mode, if the Sync line is high
during the Res line is low (reset phase). To avoid this behavior the
Sync line must be also forced to zero during the reset phase. To do
that, the pin muxing should switch to GPIO mode and the GPIO control
register should be used to control the output lines."
Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  xen: Do not suspend IPI IRQs.
  powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts
  ixp4xx-beeper: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupt
  irq: Add new IRQ flag IRQF_NO_SUSPEND

Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Documentation: Add timers/timers-howto.txt
  timer: Added usleep_range timer
  Revert "timer: Added usleep[_range] timer"
  clockevents: Remove the per cpu tick skew
  posix_timer: Move copy_to_user(created_timer_id) down in timer_create()
  timer: Added usleep[_range] timer
  timers: Document meaning of deferrable timer

KVM ended up having to put a pretty ugly wrapper around set_64bit()
in order to get the type right.  Now set_64bit() takes the expected
u64 type, and this wrapper can be cleaned up.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <4C5C4E7A.8040603@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq
  pcmcia: do not request windows if you don't need to
  pcmcia: insert PCMCIA device resources into resource tree
  pcmcia: export resource information to sysfs
  pcmcia: use struct resource for PCMCIA devices, part 2
  pcmcia: remove memreq_t
  pcmcia: move local definitions out of include/pcmcia/cs.h
  pcmcia: do not use io_req_t when calling pcmcia_request_io()
  pcmcia: do not use io_req_t after call to pcmcia_request_io()
  pcmcia: use struct resource for PCMCIA devices
  pcmcia: clean up cs.h
  pcmcia: use pcmica_{read,write}_config_byte
  pcmcia: remove cs_types.h
  pcmcia: remove unused flag, simplify headers
  pcmcia: remove obsolete CS_EVENT_ definitions
  pcmcia: split up central event handler
  pcmcia: simplify event callback
  pcmcia: remove obsolete ioctl

Conflicts in:
 - drivers/staging/comedi/drivers/*
 - drivers/staging/wlags49_h2/wl_cs.c
due to dev_info_t and whitespace changes

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits)
  PCI: update for owner removal from struct device_attribute
  PCI: Fix warnings when CONFIG_DMI unset
  PCI: Do not run NVidia quirks related to MSI with MSI disabled
  x86/PCI: use for_each_pci_dev()
  PCI: use for_each_pci_dev()
  PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()
  PCI: export SMBIOS provided firmware instance and label to sysfs
  PCI: Allow read/write access to sysfs I/O port resources
  x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN
  PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}
  PCI: disable mmio during bar sizing
  PCI: MSI: Remove unsafe and unnecessary hardware access
  PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable
  PCI: kernel oops on access to pci proc file while hot-removal
  PCI: pci-sysfs: remove casts from void*
  ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe
  PCI hotplug: make sure child bridges are enabled at hotplug time
  PCI hotplug: shpchp: Removed check for hotplug of display devices
  PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device
  PCI: Don't enable aspm before drivers have had a chance to veto it
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Allow removal of slab caches during boot
  Revert "slub: Allow removal of slab caches during boot"
  slub numa: Fix rare allocation from unexpected node
  slab: use deferable timers for its periodic housekeeping
  slub: Use kmem_cache flags to detect if slab is in debugging mode.
  slub: Allow removal of slab caches during boot
  slub: Check kasprintf results in kmem_cache_init()
  SLUB: Constants need UL
  slub: Use a constant for a unspecified node.
  SLOB: Free objects to their own list
  slab: fix caller tracking on !CONFIG_DEBUG_SLAB && CONFIG_TRACING

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (524 commits)
  Staging: wlan-ng: Update prism2_set_tx_power() to use mBm
  Staging: ti-st: update TODO
  Staging: wlags49_h2: use common PCI_VENDOR/DEVICE_ID name format
  Staging: comedi : fix brace coding style issue in wwrap.c
  Staging: quatech_usb2: remove unused qt2_box_flush function
  Staging: slicoss: Remove net_device_stats from the driver's private
  staging: rtl8192su: check whether requests succeeded
  staging: panel: fix error path
  staging: otus: check kmalloc() return value
  staging: octeon: check request_irq() return value
  Staging: wlan-ng: remove typedef in p80211hdr.h
  Staging: wlan-ng: fix checkpatch issues in headers.
  Staging: wlan-ng: remove typedef in p80211ioctl.h
  Staging: wlan-ng: fix style issues in p80211conv.h
  Staging: wlan-ng: fix style issues for p80211hdr.h
  staging: vt6656: removed NTSTATUS definition
  staging: vt6656: simplified tests involving both multi/broad-casts
  Staging: vt6655: replace BOOL with in kernel bool
  Staging: vt6655: replace FALSE with in kernel false
  Staging: vt6655: replace TRUE with in kernel true
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (28 commits)
  driver core: device_rename's new_name can be const
  sysfs: Remove owner field from sysfs struct attribute
  powerpc/pci: Remove owner field from attribute initialization in PCI bridge init
  regulator: Remove owner field from attribute initialization in regulator core driver
  leds: Remove owner field from attribute initialization in bd2802 driver
  scsi: Remove owner field from attribute initialization in ARCMSR driver
  scsi: Remove owner field from attribute initialization in LPFC driver
  cgroupfs: create /sys/fs/cgroup to mount cgroupfs on
  Driver core: Add BUS_NOTIFY_BIND_DRIVER
  driver core: fix memory leak on one error path in bus_register()
  debugfs: no longer needs to depend on SYSFS
  sysfs: Fix one more signature discrepancy between sysfs implementation and docs.
  sysfs: fix discrepancies between implementation and documentation
  dcdbas: remove a redundant smi_data_buf_free in dcdbas_exit
  dmi-id: fix a memory leak in dmi_id_init error path
  sysfs: sysfs_chmod_file's attr can be const
  firmware: Update hotplug script
  Driver core: move platform device creation helpers to .init.text (if MODULE=n)
  Driver core: reduce duplicated code for platform_device creation
  Driver core: use kmemdup in platform_device_add_resources
  ...

Commit 69309a05 ("x86, asm: Clean up and simplify set_64bit()")
sanitized the x86-64 types to set_64bit(), and incidentally resulted in
warnings like

 drivers/pci/intr_remapping.c: In function 'modify_irte':
 drivers/pci/intr_remapping.c:314: warning: passing argument 1 of 'set_64bit' from incompatible pointer type
 arch/x86/include/asm/cmpxchg_64.h:6: note:expected 'volatile u64 *' but argument is of type 'long unsigned int *'

It turns out that the change to set_64bit() really does clean up things,
and the PCI intr_remapping.c file did a rather ugly cast in order to
avoid warnings with the previous set_64bit() type model.

Removing the ugly cast fixes the warning, and makes everybody happy and
expects a set_64bit() to take the logical "u64 *" argument.
Pointed-out-by: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branches 'x86-rwsem-for-linus' and 'x86-gcc46-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, rwsem: Minor cleanups
  x86, rwsem: Stay on fast path when count > 0 in __up_write()

* 'x86-gcc46-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, gcc-4.6: Fix set but not read variables
  x86, gcc-4.6: Avoid unused by set variables in rdmsr

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: move isdigit.h to ctype.h, header files on top.
  x86, setup: enable early console output from the decompressor
  x86, setup: reorganize the early console setup
  x86, setup: Allow global variables and functions in the decompressor
  x86, setup: Only set early_serial_base after port is initialized
  x86, setup: Make the setup code also accept console=uart8250
  x86, setup: Early-boot serial I/O support

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Ioremap: fix wrong physical address handling in PAT code
  x86, tlb: Clean up and correct used type
  x86, iomap: Fix wrong page aligned size calculation in ioremapping code
  x86, mm: Create symbolic index into address_markers array
  x86, ioremap: Fix normal ram range check
  x86, ioremap: Fix incorrect physical address handling in PAE mode
  x86-64, mm: Initialize VDSO earlier on 64 bits
  x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um, x86: Cast to (u64 *) inside set_64bit()
  x86-32, asm: Directly access per-cpu GDT
  x86-64, asm: Directly access per-cpu IST
  x86, asm: Merge cmpxchg_486_u64() and cmpxchg8b_emu()
  x86, asm: Move cmpxchg emulation code to arch/x86/lib
  x86, asm: Clean up and simplify <asm/cmpxchg.h>
  x86, asm: Clean up and simplify set_64bit()
  x86: Add memory modify constraints to xchg() and cmpxchg()
  x86-64: Simplify loading initial_gs
  x86: Use symbolic MSR names
  x86: Remove redundant K6 MSRs

Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vdso: Don't quote $nm in the script for checking vdso references
  x86, vdso: Error out if the vdso contains external references

Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mrst: make mrst_timer_options an enum
  x86, mrst: make mrst_identify_cpu() an inline returning enum
  x86, mrst: add more timer config options
  x86, mrst: add cpu type detection
  x86: detect scattered cpuid features earlier

Merge branch 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
  x86, hwmon: Package Level Thermal/Power: power limit
  x86, hwmon: Package Level Thermal/Power: thermal throttling handler
  x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix keeping track of AMD C1E
  x86, cpu: Package Level Thermal Control, Power Limit Notification definitions
  x86, cpu: Export AMD errata definitions
  x86, cpu: Use AMD errata checking framework for erratum 383
  x86, cpu: Clean up AMD erratum 400 workaround
  x86, cpu: AMD errata checking framework
  x86, cpu: Split addon_cpuid_features.c
  x86, cpu: Clean up formatting in cpufeature.h, remove override
  x86, cpu: Enumerate xsaveopt
  x86, cpu: Add xsaveopt cpufeature
  x86, cpu: Make init_scattered_cpuid_features() consider cpuid subleaves
  x86, cpu: Support the features flags in new CPUID leaf 7
  x86, cpu: Add CPU flags for F16C and RDRND
  x86: Look for IA32_ENERGY_PERF_BIAS support
  x86, AMD: Extend support to future families
  x86, cacheinfo: Carve out L3 cache slot accessors
  x86, xsave: Cleanup return codes in check_for_xstate()

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
  sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug
  sched: No need for bootmem special cases
  sched: Revert nohz_ratelimit() for now
  sched: Reduce update_group_power() calls
  sched: Update rq->clock for nohz balanced cpus
  sched: Fix spelling of sibling
  sched, cpuset: Drop __cpuexit from cpu hotplug callbacks
  sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check()
  sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()
  sched: thread_group_cputime: Simplify, document the "alive" check
  sched: Remove the obsolete exit_state/signal hacks
  sched: task_tick_rt: Remove the obsolete ->signal != NULL check
  sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless
  sched: Fix comments to make them DocBook happy
  sched: Fix fix_small_capacity
  powerpc: Exclude arch_sd_sibiling_asym_packing() on UP
  powerpc: Enable asymmetric SMT scheduling on POWER7
  sched: Add asymmetric group packing option for sibling domain
  sched: Fix capacity calculations for SMT4
  sched: Change nohz idle load balancing logic to push model
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "net: Make accesses to ->br_port safe for sparse RCU"
  mce: convert to rcu_dereference_index_check()
  net: Make accesses to ->br_port safe for sparse RCU
  vfs: add fs.h to define struct file
  lockdep: Add an in_workqueue_context() lockdep-based test function
  rcu: add __rcu API for later sparse checking
  rcu: add an rcu_dereference_index_check()
  tree/tiny rcu: Add debug RCU head objects
  mm: remove all rcu head initializations
  fs: remove all rcu head initializations, except on_stack initializations
  powerpc: remove all rcu head initializations

Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Export cache-coherency capability
  iommu-api: Extension to check for interrupt remapping
  x86/amd-iommu: Use for_each_pci_dev()

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_fsl,mv,nv: prepare for NCQ command completion update
  ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
  libata: more PCI IDs for jmicron controllers
  ata_piix: fix locking around SIDPR access
  [libata] update blacklist for new hyphenated pattern ranges (v2)
  libata: allow hyphenated pattern ranges
  ata_generic: drop hard coded DMA force logic for CENATEK
  [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum <anonymous>'
  [libata] add ATA_CMD_DSM to ata_get_cmd_descript
  [libata] Add Samsung PATA controller driver, pata_samsung_cf
  [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex
  libata: reduce blacklist size even more (v2)
  libata: reduce blacklist size (v2)
  libata: glob_match for ata_device_blacklist (v2)
  ahci_platform: Remove unneeded ahci_driver.probe assignment
  ahci_platform: Provide for vendor specific init

Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings.  This patch (as1411) removes
one such fake expression, using an "#ifdef" in its place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus wrote:
 This seems to make "make oldconfig" a _lot_ more verbose than it
 used to be. In a very annoying way.

 I just did a quick git bisect. It's introduced by commit 4062f1a4
 ("kconfig: use long options in conf") by Sam Ravnborg. Apparently that
 thing is totally buggy, and doesn't just change the option names, but
 actively breaks them.

The old behaviour (from years ago) were reintroduced by accident.  Fix
this so we are back to the version that are silent if there is nothing
to ask about.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /dev/console get initialised before any initialisation routine that
invokes modprobe because if modprobe fails, it's going to want to open
/dev/console, presumably to write an error message to.

The problem with that is that if the /dev/console driver is not yet
initialised, the chardev handler will call request_module() to invoke
modprobe, which will fail, because we never compile /dev/console as a
module.

This will lead to a modprobe loop, showing the following in the kernel
log:

	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1

This can happen, for example, when the built in md5 module can't find
the built in cryptomgr module (because the latter fails to initialise).
The md5 module comes before the call to tty_init(), presumably because
'crypto' comes before 'drivers' alphabetically.

Fix this by calling tty_init() from chrdev_init().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

request_key() should return -ENOKEY if the key it constructs has been
negatively instantiated.

Without this, request_key() can return an unusable key to its caller,
and if the caller then does key_validate() that won't catch the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits)
  agp: intel-agp: do not use PCI resources before pci_enable_device()
  agp: efficeon-agp: do not use PCI resources before pci_enable_device()
  drm: kill BKL from common code
  drm/kms: Simplify setup of the initial I2C encoder config.
  drm,io-mapping: Specify slot to use for atomic mappings
  drm/radeon/kms: only expose underscan on avivo chips
  drm/radeon: add new pci ids
  drm: Cleanup after failing to create master->unique and dev->name
  drm/radeon: tone down overchatty acpi debug messages.
  drm/radeon/kms: enable underscan option for digital connectors
  drm/radeon/kms: fix calculation of h/v scaling factors
  drm/radeon/kms/igp: sideport is AMD only
  drm/radeon/kms: handle the case of no active displays properly in the bandwidth code
  drm: move ttm global code to core drm
  drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it.
  drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors
  drm/radeon/kms: make sure rio_mem is valid before unmapping it
  drm/agp/i915: trim stolen space to 32M
  drm/i915: Unset cursor if out-of-bounds upon mode change (v4)
  drm/i915: Unreference object not handle on creation
  ...

* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,docs: Update the kgdb docs to include kms
  drm_fb_helper: Preserve capability to use atomic kms
  i915: when kgdb is active display compression should be off
  drm/i915: use new fb debug hooks
  drm: add KGDB/KDB support
  fb: add hooks to handle KDB enter/exit
  kgdboc: Add call backs to allow kernel mode switching
  vt,console,kdb: automatically set kdb LINES variable
  vt,console,kdb: implement atomic console enter/leave functions

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  apparmor: depends on NET

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/dtc: Fix a resource leak
  Documentation: fix ubuntu distro name
  MAINTAINERS: Update kbuild git URLs
  Add support for the C variable in the coccicheck script
  Add scripts/coccinelle/deref_null.cocci
  Add scripts/coccinelle/err_cast.cocci
  Add scripts/coccinelle/resource_size.cocci
  Add scripts/coccinelle/alloc/kzalloc-simple.cocci
  Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
  Add Documentation/coccinelle.txt
  Add a target to use the Coccinelle checker
  scripts: decodecode: remove bashisms
  Makefile: clarify a comment
  checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters
  scripts: add nconf into gitignore file

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Change section of generated debian packages to kernel
  kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
  kbuild: Add homepage field to debian/control file

Commit fa61cf70 updates nl80211's function
.set_tx_power to use mBm units instead of dBm for greater accuracy and
smaller power levels.

This patchs updates prism2_set_tx_power() accordingly.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Conflicts:
	drivers/staging/Kconfig
	drivers/staging/batman-adv/bat_sysfs.c
	drivers/staging/batman-adv/device.c
	drivers/staging/batman-adv/hard-interface.c
	drivers/staging/cx25821/cx25821-audups11.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (26 commits)
  kconfig: add savedefconfig
  kconfig: code refactoring in confdata.c
  kconfig: refactor code in symbol.c
  kconfig: add alldefconfig
  kconfig: print more info when we see a recursive dependency
  kconfig: save location of config symbols
  kconfig: change nonint_oldconfig to listnewconfig
  kconfig: rename loose_nonint_oldconfig => oldnoconfig
  kconfig: use long options in conf
  kconfig: fix MODULES-related bug in case of no .config
  kconfig: make randconfig fair for booleans
  kconfig: Don't write invisible choice values
  kbuild: Warn on selecting symbols with unmet direct dependencies
  scripts:conf.c Fix warning: variable 'type' set but not used
  menuconfig: truncate list items
  menuconfig: fix to center checklist correctly in a corner case
  xconfig: add support to show hidden options which have prompts
  xconfig: remove unused function
  xconfig: clean up
  gconfig: fix null pointer warning
  ...

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  modpost: support objects with more than 64k sections
  trivial: fix a typo in a filename
  frv: clean up arch/frv/Makefile
  kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
  kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
  Kbuild: Add option to set -femit-struct-debug-baseonly
  Makefile: "make kernelrelease" should show the correct full kernel version
  Makefile.build: make KBUILD_SYMTYPES work again

The new_name argument to device_rename() can be
const as kobject_rename's new_name argument is.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>