- 30 Jan, 2015 29 commits
-
-
Felipe Balbi authored
commit 4b149e41 upstream. commit 55601c9f (arm: omap: intc: switch over to linear irq domain) introduced a regression with SDMA legacy driver because that driver strictly depends on INTC's IRQs starting at NR_IRQs. Aparently irq_domain_add_linear() won't guarantee that, since we see a 7 IRQs difference when booting with and without the commit cited above. Until arch/arm/plat-omap/dma.c is properly fixed, we must maintain OMAP2/3 using irq_domain_add_legacy(). A FIXME note was added so people know to delete that code once that legacy DMA driver is fixed up. Fixes: 55601c9f (arm: omap: intc: switch over to linear irq domain) Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joe Thornber authored
commit a59db676 upstream. Introduce a new variable to count the number of allocated migration structures. The existing variable cache->nr_migrations became overloaded. It was used to: i) track of the number of migrations in flight for the purposes of quiescing during suspend. ii) to estimate the amount of background IO occuring. Recent discard changes meant that REQ_DISCARD bios are processed with a migration. Discards are not background IO so nr_migrations was not incremented. However this could cause quiescing to complete early. (i) is now handled with a new variable cache->nr_allocated_migrations. cache->nr_migrations has been renamed cache->nr_io_migrations. cleanup_migration() is now called free_io_migration(), since it decrements that variable. Also, remove the unused cache->next_migration variable that got replaced with with prealloc_structs a while ago. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 9b1cc9f2 upstream. If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by:
-
Hans Verkuil authored
commit 6cf11ee6 upstream. The locking scheme inside the vb2 thread is unsafe when stopping the thread. In particular kthread_stop was called *after* internal data structures were cleaned up instead of doing that before. In addition, internal vb2 functions were called after threadio->stop was set to true and vb2_internal_streamoff was called. This is also not allowed. All this led to a variety of race conditions and kernel warnings and/or oopses. Fixed by moving the kthread_stop call up before the cleanup takes place, and by checking threadio->stop before calling internal vb2 queuing operations. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Matthias Schwarzott authored
commit 721f3223 upstream. Unconditionally attaching Si2161/Si2165 demod driver breaks Hauppauge WinTV Starburst. So create own card entry for this. Add card name comments to the subsystem ids. This fixes a regression introduced in 3.17 by 36efec48 ([media] cx23885: Add si2165 support for HVR-5500) Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Tested-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Brian King authored
commit 6cdb0817 upstream. Fixes a race condition in abort handling that was injected when multiple interrupt support was added. When only a single interrupt is present, the adapter guarantees it will send responses for aborted commands prior to the response for the abort command itself. With multiple interrupts, these responses generally come back on different interrupts, so we need to ensure the abort thread waits until the aborted command is complete so we don't perform a double completion. This race condition was being hit frequently in environments which were triggering command timeouts, which was resulting in a double completion causing a kernel oops. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alex Williamson authored
commit c3e59ee4 upstream. Reports against the TL-WDN4800 card indicate that PCI bus reset of this Atheros device cause system lock-ups and resets. I've also been able to confirm this behavior on multiple systems. The device never returns from reset and attempts to access config space of the device after reset result in hangs. Blacklist bus reset for the device to avoid this issue. [bhelgaas: This regression appeared in v3.14. Andreas bisected it to 425c1b22 ("PCI: Add Virtual Channel to save/restore support"), but we don't understand the mechanism by which that commit affects the reset path.] [bhelgaas: changelog, references] Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.orgReported-by:
Andreas Hartmann <andihartmann@freenet.de> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Alex Williamson authored
commit f331a859 upstream. Enable a mechanism for devices to quirk that they do not behave when doing a PCI bus reset. We require a modest level of spec compliant behavior in order to do a reset, for instance the device should come out of reset without throwing errors and PCI config space should be accessible after reset. This is too much to ask for some devices. Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.orgSigned-off-by:
-
Yinghai Lu authored
commit 851b0936 upstream. Every PCI-PCI bridge window should fit inside an upstream bridge window because orphaned address space is unreachable from the primary side of the upstream bridge. If we inherit invalid bridge windows that overlap an upstream window from firmware, clip them to fit and update the bridge accordingly. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491Reported-by:
Marek Kordik <kordikmarek@gmail.com> Tested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Yinghai Lu authored
commit 0f7e7aee upstream. Add pci_bus_clip_resource(). If a PCI-PCI bridge window overlaps an upstream bridge window but is not completely contained by it, this clips the downstream window so it fits inside the upstream one. No functional change (this adds the function but no callers). [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491Reported-by:
-
Yinghai Lu authored
commit 8505e729 upstream. Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b285415, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491Reported-by:
-
Yinghai Lu authored
commit 3f2f4dc4 upstream. pci_setup_bridge_io(), pci_setup_bridge_mmio(), and pci_setup_bridge_mmio_pref() program the windows of PCI-PCI bridges. Previously they accepted a pointer to the pci_bus of the secondary bus, then looked up the bridge leading to that bus. Pass the bridge directly, which will make it more convenient for future callers. No functional change. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491Reported-by:
-
Alex Deucher authored
commit d8a74e18 upstream. This was accidently lost in 76a0df85. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5615f890 upstream. This adds a quirks list to fix stability problems with certain SI boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Alex Deucher authored
commit 4369a69e upstream. Disable dpm on certain problematic boards rather than disabling dpm for the entire chip family since most boards work fine. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386534 https://bugzilla.kernel.org/show_bug.cgi?id=83731Signed-off-by:
-
Chris Wilson authored
commit 226e5ae9 upstream. If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared if the mutex debugging is enabled which introduces a race in our mutex_is_locked_by() - i.e. we may inspect the old owner value before it is acquired by the new task. This is the root cause of this error: # diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c # index 5cf6731..3ef3736 100644 # --- a/kernel/locking/mutex-debug.c # +++ b/kernel/locking/mutex-debug.c # @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock) # DEBUG_LOCKS_WARN_ON(lock->owner != current); # # DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next); # - mutex_clear_owner(lock); # } # # /* # * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug # * mutexes so that we can do it here after we've verified state. # */ # + mutex_clear_owner(lock); # atomic_set(&lock->count, 1); # } Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 48bf5b2d upstream. Like Ivybridge, we have reports that we get random hangs when flipping with multiple pipes. Extend commit 2a92d5bc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 8 10:40:29 2014 +0100 drm/i915: Disable RCS flips on Ivybridge to also apply to Haswell. Reported-and-tested-by:
Scott Tsai <scottt.tw@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87759Signed-off-by:
-
Michael Karcher authored
commit 1caf6aaa upstream. Compiling SH with gcc-4.8 fails due to the -m32 option not being supported. From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783 CC init/main.o gcc-4.8: error: unrecognized command line option '-m32' ld: cannot find init/.tmp_mc_main.o: No such file or directory objcopy: 'init/.tmp_mx_main.o': No such file rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de Cc: Matt Fleming <matt@console-pimps.org> Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Tejun Heo authored
commit 29187a9e upstream. A worker_pool's forward progress is guaranteed by the fact that the last idle worker assumes the manager role to create more workers and summon the rescuers if creating workers doesn't succeed in timely manner before proceeding to execute work items. This manager role is implemented in manage_workers(), which indicates whether the worker may proceed to work item execution with its return value. This is necessary because multiple workers may contend for the manager role, and, if there already is a manager, others should proceed to work item execution. Unfortunately, the function also indicates that the worker may proceed to work item execution if need_to_create_worker() is false at the head of the function. need_to_create_worker() tests the following conditions. pending work items && !nr_running && !nr_idle The first and third conditions are protected by pool->lock and thus won't change while holding pool->lock; however, nr_running can change asynchronously as other workers block and resume and while it's likely to be zero, as someone woke this worker up in the first place, some other workers could have become runnable inbetween making it non-zero. If this happens, manage_worker() could return false even with zero nr_idle making the worker, the last idle one, proceed to execute work items. If then all workers of the pool end up blocking on a resource which can only be released by a work item which is pending on that pool, the whole pool can deadlock as there's no one to create more workers or summon the rescuers. This patch fixes the problem by removing the early exit condition from maybe_create_worker() and making manage_workers() return false iff there's already another manager, which ensures that the last worker doesn't start executing work items. We can leave the early exit condition alone and just ignore the return value but the only reason it was put there is because the manage_workers() used to perform both creations and destructions of workers and thus the function may be invoked while the pool is trying to reduce the number of workers. Now that manage_workers() is called only when more workers are needed, the only case this early exit condition is triggered is rare race conditions rendering it pointless. Tested with simulated workload and modified workqueue code which trigger the pool deadlock reliably without this patch. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Eric Sandeen <sandeen@sandeen.net> Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net Cc: Dave Chinner <david@fromorbit.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
Jason Lee Cragg authored
commit 64559311 upstream. Signed-off-by:
Jason Lee Cragg <jcragg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Jeffery authored
commit ce751452 upstream. It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). This problem is hard to reproduce making this patch hard to verify, but this fix will prevent the race. I have not been able to reproduce the problem, but here is a crash dump from a 2.6.32 kernel. On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE: crash> struct ata_port.hsm_task_state ffff881c1121c000 hsm_task_state = 0 Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(), which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value. PID: 11053 TASK: ffff8816e846cae0 CPU: 0 COMMAND: "sshd" #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510 #3 [ffff88008ba03ac0] die at ffffffff81010e0b #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b [exception RIP: ata_sff_hsm_move+317] RIP: ffffffff813a77ad RSP: ffff88008ba03ca0 RFLAGS: 00010097 RAX: 0000000000000000 RBX: ffff881c1121dc60 RCX: 0000000000000000 RDX: ffff881c1121dd10 RSI: ffff881c1121dc60 RDI: ffff881c1121c000 RBP: ffff88008ba03d00 R8: 0000000000000000 R9: 000000000000002e R10: 000000000001003f R11: 000000000000009b R12: ffff881c1121c000 R13: 0000000000000000 R14: 0000000000000050 R15: ffff881c1121dd78 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
-
Dan Williams authored
commit 72dd299d upstream. Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101 "Since commit 8a4aeec8 "libata/ahci: accommodate tag ordered controllers" the access to the harddisk on the first SATA-port is failing on its first access. The access to the harddisk on the second port is working normal. When reverting the above commit, access to both harddisks is working fine again." Maintain tag ordered submission as the default, but allow sata_sil24 to continue with the old behavior. Cc: Tejun Heo <tj@kernel.org> Reported-by:
Ronny Hegewald <Ronny.Hegewald@online.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Roger Tseng authored
commit b166010f upstream. sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the device is awake while initializing a newly inserted card. Once it is called during suspending state and explicitly before rtsx_usb_suspend() acquires the same dev_mutex, both routine deadlock and further hang the driver because pm_runtime_get_sync() waits the pending PM operations. Fix this by using an empty suspend method. mmc_core always turns the LED off after a request is done and thus it is ok to remove the only rtsx_usb_turn_off_led() here. Fixes: 730876be ("mfd: Add realtek USB card reader driver") Signed-off-by:
Roger Tseng <rogerable@realtek.com> [Lee: Removed newly unused variable] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Felipe Balbi authored
commit f29ae369 upstream. If we don't tell regmap-irq that our first status register is at offset 1, it will try to read offset zero, which is the chipid register. Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by:
-
Felipe Balbi authored
commit 773328da upstream. STATUS register can be modified by the HW, so we should bypass cache because of that. In the case of INT[12] registers, they are the ones that actually clear the IRQ source at the time they are read. If we rely on the cache for them, we will never be able to clear the interrupt, which will cause our IRQ line to be disabled due to IRQ throttling. Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by:
-
Jim Lin authored
commit db93facf upstream. This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit bcd53f85 upstream. Timur reports that this code crashes if nfunctions is 0. Fix the loop iteration to only consider valid elements of the functions array. Reported-by:
Timur Tabi <timur@codeaurora.org> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Andy Gross <agross@codeaurora.org> Fixes: 32745581 "pinctrl: qcom: Add support for reset for apq8064" Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Oliver Hartkopp authored
commit 6cfda7fb upstream. During the CAN FD standardization process within the ISO it turned out that the failure detection capability has to be improved. The CAN in Automation organization (CiA) defined the already implemented CAN FD controllers as 'non-ISO' and the upcoming improved CAN FD controllers as 'ISO' compliant. See at http://www.can-cia.com/index.php?id=1937 Finally there will be three types of CAN FD controllers in the future: 1. ISO compliant (fixed) 2. non-ISO compliant (fixed, like the M_CAN IP v3.0.1 in m_can.c) 3. ISO/non-ISO CAN FD controllers (switchable, like the PEAK USB FD) So the current M_CAN driver for the M_CAN IP v3.0.1 has to expose its non-ISO implementation by setting the CAN_CTRLMODE_FD_NON_ISO ctrlmode at startup. As this bit cannot be switched at configuration time CAN_CTRLMODE_FD_NON_ISO must not be set in ctrlmode_supported of the current M_CAN driver. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
commit 9b1087aa upstream. When changing flags in the CAN drivers ctrlmode the provided new content has to be checked whether the bits are allowed to be changed. The bits that are to be changed are given as a bitfield in cm->mask. Therefore checking against cm->flags is wrong as the content can hold any kind of values. The iproute2 tool sets the bits in cm->mask and cm->flags depending on the detected command line options. To be robust against bogus user space applications additionally sanitize the provided flags with the provided mask. Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
- 27 Jan, 2015 11 commits
-
-
Greg Kroah-Hartman authored
-
Bandan Das authored
commit 78051e3b upstream. If L0 has disabled EPT, don't advertise unrestricted mode at all since it depends on EPT to run real mode code. Fixes: 92fbc7b1Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
commit 7f1241ed upstream. pps_{lock,unlock}() call intel_display_power_{get,put}() outside pps_mutes to avoid deadlocks with the power_domain mutex. In theory during aux transfers we should usually have the relevant power domain references already held by some higher level code, so this should not result in much overhead (exception being userspace i2c-dev access). However thanks to the check_power_well() calls in intel_display_power_{get/put}() we end up doing a few Punit reads for each aux transfer. Obviously doing this for each byte transferred via i2c-over-aux is not a good idea. I can't think of a good way to keep check_power_well() while eliminating the overhead, so let's just remove check_power_well() entirely. Fixes a driver init time regression introduced by: commit 773538e8 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Credit goes to Jani for figuring this out. v2: Add the regression note in the commit message. Cc: Egbert Eich <eich@suse.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86201Tested-by:
Wendy Wang <wendy.wang@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: s/intel_runtime_pm.c/intel_pm.c/g and wiggle for 3.18] Signed-off-by:
-
Nicholas Bellinger authored
commit 46243860 upstream. While looking at hch's recent conversion to drop the MSG_*_TAG definitions, I noticed a long standing bug in vhost-scsi where the VIRTIO_SCSI_S_* attribute definitions where incorrectly being passed directly into target_submit_cmd_map_sgls(). This patch adds the missing virtio-scsi to TCM/SAM task attribute conversion. Cc: Christoph Hellwig <hch@lst.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 046ba642 upstream. This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(), which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512 byte sector devices), and for hw_max_sectors is a backend driver dependent value. This limit is problematic because Linux initiators have only recently started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger than 4 MB in size. Currently when this happens, the following message will appear on the target resulting in I/Os being returned with non recoverable status: SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192 Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(), and convert the existing hw_max_sectors into a purely informational attribute used to represent the granuality that backend driver and/or subsystem code is splitting I/Os upon. Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw() to deal with the one special iovec limitiation case. v2 changes: - Drop hw_max_sectors check in sbc_parse_cdb() Reported-by:
Lance Gropper <lance.gropper@qosserver.com> Reported-by:
Stefan Priebe <s.priebe@profihost.ag> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Trond Myklebust authored
commit 06bed7d1 upstream. This commit fixes a race whereby nlmclnt_init() first starts the lockd daemon, and then calls nlm_bind_host() with the expectation that nlmsvc_timeout has already been initialised. Unfortunately, there is no no synchronisation between lockd() and lockd_up() to guarantee that this is the case. Fix is to move the initialisation of nlmsvc_timeout into lockd_create_svc Fixes: 9a1b6bf8 ("LOCKD: Don't call utsname()->nodename...") Cc: Bruce Fields <bfields@fieldses.org> Cc: stable@vger.kernel.org # 3.10.x Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Michal Marek authored
commit a16c5f99 upstream. scripts/Makefile.clean treats absolute path specially, but $(objtree)/debian is no longer an absolute path since 7e1c0477 (kbuild: Use relative path for $(objtree). Work around this by checking if the path starts with $(objtree)/. Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Fixes: 7e1c0477 (kbuild: Use relative path for $(objtree) Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Daniel Borkmann authored
commit b485342b upstream. Commit a074335a ("x86, um: Mark system call tables readonly") was supposed to mark the sys_call_table in UML as RO by adding the const, but it doesn't have the desired effect as it's nevertheless being placed into the data section since __cacheline_aligned enforces sys_call_table being placed into .data..cacheline_aligned instead. We need to use the ____cacheline_aligned version instead to fix this issue. Before: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size After: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size Fixes: a074335a ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit f911d731 upstream. futex_atomic_cmpxchg_inatomic() does not work on UML because it triggers a copy_from_user() in kernel context. On UML copy_from_user() can only be used if the kernel was called by a real user space process such that UML can use ptrace() to fetch the value. Reported-by:
Miklos Szeredi <miklos@szeredi.hu> Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Daniel Walter <d.walter@0x90.at> Signed-off-by:
-
Dan Carpenter authored
commit b5c8afe5 upstream. "origPtr" is used as an offset into the bd->dbuf[] array. That array is allocated in start_bunzip() and has "bd->dbufSize" number of elements so the test here should be >= instead of >. Later we check "origPtr" again before using it as an offset so I don't know if this bug can be triggered in real life. Fixes: bc22c17e ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit 2eacc608 upstream. The ad7991/ad7995/ad7999 does not have a configuration register like the other devices that can be written and read. The configuration is written as part of the conversion sequence. Fixes: 0f7ddcc1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Tested-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
