- 08 Aug, 2017 27 commits
-
-
Hans Verkuil authored
Various references to open() et al were wrong. Fix this so following the link will get you to the correct place. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
Passing uninitialized flags into device_prep_interleaved_dma is clearly a bad idea, and we get a compiler warning for it: drivers/media/platform/omap/omap_vout_vrfb.c: In function 'omap_vout_prepare_vrfb': drivers/media/platform/omap/omap_vout_vrfb.c:273:5: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized] It seems that the OMAP dmaengine ignores the flags, but we should pick the right ones anyway. This sets the flags I guessed based on what other drivers used, and Peter confirmed that they are the right ones. Fixes: 6a1560ec ("media: v4l: omap_vout: vrfb: Convert to dmaengine") Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
__WARN() cannot be used in portable code, since it is only available on some architectures and configurations: drivers/media/platform/pxa_camera.c: In function 'pxa_mbus_config_compatible': drivers/media/platform/pxa_camera.c:642:3: error: implicit declaration of function '__WARN'; did you mean '__WALL'? [-Werror=implicit-function-declaration] The common way to express an unconditional warning is WARN_ON(1), so let's use that here. Fixes: 97bbdf02 ("media: v4l: Add support for CSI-1 and CCP2 busses") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Arnd Bergmann authored
The new ov5670 driver fails to build when VIDEO_V4L2_SUBDEV_API or MEDIA_CONTROLLER are disabled: drivers/media/i2c/ov5670.c: In function 'ov5670_open': drivers/media/i2c/ov5670.c:1917:5: error: implicit declaration of function 'v4l2_subdev_get_try_format'; did you mean 'v4l2_subdev_notify_event'? [-Werror=implicit-function-declaration] v4l2_subdev_get_try_format(sd, fh->pad, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~ v4l2_subdev_notify_event drivers/media/i2c/ov5670.c:1917:38: error: 'struct v4l2_subdev_fh' has no member named 'pad' v4l2_subdev_get_try_format(sd, fh->pad, 0); ^~ drivers/media/i2c/ov5670.c: In function 'ov5670_do_get_pad_format': drivers/media/i2c/ov5670.c:2198:17: error: invalid type argument of unary '*' (have 'int') fmt->format = *v4l2_subdev_get_try_format(&ov5670->sd, cfg, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fmt->pad); ~~~~~~~~~ drivers/media/i2c/ov5670.c: At top level: drivers/media/i2c/ov5670.c:2444:19: error: 'v4l2_subdev_link_validate' undeclared here (not in a function); did you mean 'v4l2_subdev_init'? .link_validate = v4l2_subdev_link_validate, ^~~~~~~~~~~~~~~~~~~~~~~~~ v4l2_subdev_init drivers/media/i2c/ov5670.c: In function 'ov5670_probe': drivers/media/i2c/ov5670.c:2492:12: error: 'struct v4l2_subdev' has no member named 'entity' This adds both to the Kconfig entry. Fixes: 5de35c9b ("media: i2c: Add Omnivision OV5670 5M sensor support") Signed-off-by: -
Kuninori Morimoto authored
Now, we can use of_graph_get_remote_endpoint(). Let's use it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
JB Van Puyvelde authored
Add static keywords to fix this kind of sparse warnings: warning: symbol 'imx_t_vcm_timing' was not declared. Should it be static? Signed-off-by:
JB Van Puyvelde <jbvanpuyvelde@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
For the write channels with 4:2:0 subsampled YUV formats, avoid chroma overdraw by only writing chroma for even lines. Reduces necessary write memory bandwidth by at least 25% (more with rotation enabled). Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
Without this, I get a build error: drivers/staging/media/imx/imx-media-vdic.c: In function '__vdic_get_fmt': drivers/staging/media/imx/imx-media-vdic.c:554:10: error: implicit declaration of function 'v4l2_subdev_get_try_format'; did you mean 'v4l2_subdev_notify_event'? [-Werror=implicit-function-declaration] Fixes: e1302912 ("[media] media: Add i.MX media core driver") Signed-off-by:
-
Arnd Bergmann authored
Without this header, we get a build error in some configurations: drivers/media/platform/omap/omap_vout_vrfb.c: In function 'omap_vout_setup_vrfb_bufs': drivers/media/platform/omap/omap_vout_vrfb.c:143:26: error: implicit declaration of function 'kzalloc'; did you mean 'vzalloc'? [-Werror=implicit-function-declaration] Fixes: 6a1560ec ("media: v4l: omap_vout: vrfb: Convert to dmaengine") Signed-off-by:
-
Hugues Fruchet authored
Fix missing mutex_destroy() when probe fails and when driver is removed. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Fix a bunch of coding style issues detected by checkpatch --strict. Signed-off-by:
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Tiffany Lin authored
Fix The camera has a blurry screen phenomenon when we video chat with apprtc using vp9 codec Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Reviewed-by:
Wu-Cheng Li <wuchengli@chromium.org> Tested-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Fabio Estevam authored
When devm_clk_get() fails the real error code should be propagated, instead of always returning -EPROBE_DEFER. Signed-off-by:
-
Hans Verkuil authored
My eye fell on this wrong coefficient in the bt2020_full matrix. The bt2020 matrix (limited range) is OK. Signed-off-by:
-
Hans Verkuil authored
MPEG4 level and profile defines were wrong. Fix this. Signed-off-by:
Nicolas Dufresne <nicolas@ndufresne.ca> Signed-off-by:
-
Hans Verkuil authored
Make note of the different luminance ranges between HDR and SDR. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Add a note stating that bt.2020 is often used in combination with the smpte 2084 transfer function. Also use the right references to the documentation of that transfer function. Signed-off-by:
-
Hans Verkuil authored
After the DocBook conversion a number of pixfmt description files just had a number in the filename (pix-fmt-004, 006, etc) which was not very descriptive. Rename them. Note that pixfmt-008.rst was folded into colorspaces-details.rst, so that file is deleted. It's easier to maintain that way. Also moved the colorspace sections to the end of the chapter. The old order was weird: the "Standard Image Formats" section (an intro into pixel formats) was followed by the colorspace sections instead of the pixel format descriptions. Moving it to the end resolved that issue. Signed-off-by:
-
Hans Verkuil authored
Set media_version to LINUX_VERSION_CODE, just as we did for driver_version. Nobody ever rememebers to update the version number, but LINUX_VERSION_CODE will always be updated. Move the MEDIA_API_VERSION define to the ifndef __KERNEL__ section of the media.h header. That way kernelspace can't accidentally start to use it again. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Since the driver_version field in struct media_device is no longer used, just remove it. Signed-off-by:
-
Hans Verkuil authored
This field will be removed as it is not needed anymore. Signed-off-by:
-
Hans Verkuil authored
This field will be removed as it is not needed anymore. Signed-off-by:
-
Hans Verkuil authored
This field will be removed as it is not needed anymore. Signed-off-by:
-
Hans Verkuil authored
Don't use driver_version from struct media_device, just return LINUX_VERSION_CODE as the other media subsystems do. The driver_version field in struct media_device will be removed in the following patches. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 4.13-rc4 * tag 'v4.13-rc4': (863 commits) Linux 4.13-rc4 Fix compat_sys_sigpending breakage ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize platform/x86: intel-vbtn: match power button on press rather than release ext4: release discard bio after sending discard commands sparc64: Fix exception handling in UltraSPARC-III memcpy. arm64: avoid overflow in VA_START and PAGE_OFFSET arm64: Fix potential race with hardware DBM in ptep_set_access_flags() ...
-
- 07 Aug, 2017 1 commit
-
-
Linus Torvalds authored
-
- 06 Aug, 2017 12 commits
-
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fix from Darren Hart: "Fix loop preventing some platforms from waking up via the power button in s2idle: - intel-vbtn: match power button on press rather than release" * tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: intel-vbtn: match power button on press rather than release
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes and cleanups for v4.13" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize ext4: release discard bio after sending discard commands ext4: convert swap_inode_data() over to use swap() on most of the fields ext4: error should be cleared if ea_inode isn't added to the cache ext4: Don't clear SGID when inheriting ACLs ext4: preserve i_mode if __ext4_set_acl() fails ext4: remove unused metadata accounting variables ext4: correct comment references to ext4_ext_direct_IO()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "This fixes two build issues for ralink platforms, both due to missing #includes which used to be included indirectly via other headers" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: mt7620: Add missing header MIPS: ralink: Fix build error due to missing header
-
Dmitry V. Levin authored
The latest change of compat_sys_sigpending in commit 8f13621a ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by:
Anatoly Pugachev <matorola@gmail.com> Inspired-by:
Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621a ("sigpending(): move compat to native") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Maninder Singh authored
This bug was found by a static code checker tool for copy paste problems. Signed-off-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Vaneet Narang <v.narang@samsung.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jerry Lee authored
On a 32-bit platform, the value of n_blcoks_count may be wrong during the file system is resized to size larger than 2^32 blocks. This may caused the superblock being corrupted with zero blocks count. Fixes: 1c6bd717Signed-off-by:
Jerry Lee <jerrylee@qnap.com> Signed-off-by:
-
Miao Xie authored
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by:
Zhang Yi <yi.zhang@huawei.com> Signed-off-by:
Miao Xie <miaoxie@huawei.com> Signed-off-by:
Wang Shilong <wshilong@ddn.com> Signed-off-by:
-
Miao Xie authored
Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer. Signed-off-by:
-
Miao Xie authored
Current ext4_expand_extra_isize just tries to expand extra isize, if someone is holding xattr lock or some check fails, it will give up. So rename its name to ext4_try_to_expand_extra_isize. Besides that, we clean up unnecessary check and move some relative checks into it. Signed-off-by:
-
Miao Xie authored
We should avoid the contention between the i_extra_isize update and the inline data insertion, so move the xattr trylock in front of i_extra_isize update. Signed-off-by:
-
Tahsin Erdogan authored
ext4_xattr_inode_read() currently reads each block sequentially while waiting for io operation to complete before moving on to the next block. This prevents request merging in block layer. Add a ext4_bread_batch() function that starts reads for all blocks then optionally waits for them to complete. A similar logic is used in ext4_find_entry(), so update that code to use the new function. Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
-
Tahsin Erdogan authored
When an xattr block has a single reference, block is updated inplace and it is reinserted to the cache. Later, a cache lookup is performed to see whether an existing block has the same contents. This cache lookup will most of the time return the just inserted entry so deduplication is not achieved. Running the following test script will produce two xattr blocks which can be observed in "File ACL: " line of debugfs output: mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G mount /dev/sdb /mnt/sdb touch /mnt/sdb/{x,y} setfattr -n user.1 -v aaa /mnt/sdb/x setfattr -n user.2 -v bbb /mnt/sdb/x setfattr -n user.1 -v aaa /mnt/sdb/y setfattr -n user.2 -v bbb /mnt/sdb/y debugfs -R 'stat x' /dev/sdb | cat debugfs -R 'stat y' /dev/sdb | cat This patch defers the reinsertion to the cache so that we can locate other blocks with the same contents. Signed-off-by:Andreas Dilger <adilger@dilger.ca>
-
