- 03 Apr, 2013 10 commits
-
-
P J P authored
Commit - fa9150a8 - replaces a call to generic_writepages() in f2fs_write_data_pages() with write_cache_pages(), with a function pointer argument pointing to routine: __f2fs_writepage. -> https://git.kernel.org/linus/fa9150a84ca333f68127097c4fa1eda4b3913a22 This patch adds a NULL pointer check in f2fs_write_data_pages() to avoid a possible NULL pointer dereference, in case if - mapping->a_ops->writepage - is NULL. Signed-off-by:
P J P <ppandit@redhat.com> Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Like below, there are 8 segment bitmaps for SSR victim candidates. enum dirty_type { DIRTY_HOT_DATA, /* dirty segments assigned as hot data logs */ DIRTY_WARM_DATA, /* dirty segments assigned as warm data logs */ DIRTY_COLD_DATA, /* dirty segments assigned as cold data logs */ DIRTY_HOT_NODE, /* dirty segments assigned as hot node logs */ DIRTY_WARM_NODE, /* dirty segments assigned as warm node logs */ DIRTY_COLD_NODE, /* dirty segments assigned as cold node logs */ DIRTY, /* to count # of dirty segments */ PRE, /* to count # of entirely obsolete segments */ NR_DIRTY_TYPE }; The upper 6 bitmaps indicates segments dirtied by active log areas respectively. And, the DIRTY bitmap integrates all the 6 bitmaps. For example, o DIRTY_HOT_DATA : 1010000 o DIRTY_WARM_DATA: 0100000 o DIRTY_COLD_DATA: 0001000 o DIRTY_HOT_NODE : 0000010 o DIRTY_WARM_NODE: 0000001 o DIRTY_COLD_NODE: 0000000 In this case, o DIRTY : 1111011, which means that we should guarantee the consistency between DIRTY and other bitmaps concreately. However, the SSR mode selects victims freely from any log types, which can set multiple bits across the various bitmap types. So, this patch eliminates this inconsistency. Reviewed-by:Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
-
Jaegeuk Kim authored
In order to do GC more reliably, I'd like to lock the vicitm summary page until its GC is completed, and also prevent any checkpoint process. Reviewed-by:
-
Jaegeuk Kim authored
This patch adds a new condition that allocates free segments in the current active section even if SSR is needed. Otherwise, f2fs cannot allocate remained free segments in the section since SSR finds dirty segments only. Reviewed-by:
-
Jaegeuk Kim authored
The foreground GCs are triggered under not enough free sections. So, we should not skip moving valid blocks in the victim segments. Reviewed-by:
-
Jaegeuk Kim authored
This patch removes a bitmap for victim segments selected by foreground GC, and modifies the other bitmap for victim segments selected by background GC. 1) foreground GC bitmap : We don't need to manage this, since we just only one previous victim section number instead of the whole victim history. The f2fs uses the victim section number in order not to allocate currently GC'ed section to current active logs. 2) background GC bitmap : This bitmap is used to avoid selecting victims repeatedly by background GCs. In addition, the victims are able to be selected by foreground GCs, since there is no need to read victim blocks during foreground GCs. By the fact that the foreground GC reclaims segments in a section unit, it'd be better to manage this bitmap based on the section granularity. Reviewed-by:
-
Jaegeuk Kim authored
When allocating a new segment under the LFS mode, we should keep the section boundary. Reviewed-by:
-
Jaegeuk Kim authored
In get_node_page, we do not need to call lock_page all the time. If the node page is cached as uptodate, 1. grab_cache_page locks the page, 2. read_node_page unlocks the page, and 3. lock_page is called for further process. Let's avoid this. Reviewed-by:
-
Jaegeuk Kim authored
Let's use a macro to get the total number of sections. Reviewed-by:
-
Jaegeuk Kim authored
A macro should not use duplicate parameter names. Reviewed-by:
-
- 31 Mar, 2013 1 commit
-
-
Alexandru Gheorghiu authored
Use kmemdup instead of kzalloc and memcpy. Signed-off-by:
Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by:
-
- 27 Mar, 2013 4 commits
-
-
Jaegeuk Kim authored
When we recover fsync'ed data after power-off-recovery, we should guarantee that any parent inode number should be correct for each direct inode blocks. So, let's make the following rules. - The fsync should do checkpoint to all the inodes that were experienced hard links. - So, the only normal files can be recovered by roll-forward. Signed-off-by: -
Jaegeuk Kim authored
In the checkpoint flow, the f2fs investigates the total nat cache entries. Previously, if an entry has NULL_ADDR, f2fs drops the entry and adds the obsolete nid to the free nid list. However, this free nid will be reused sooner, resulting in its nat entry miss. In order to avoid this, we don't need to drop the nat cache entry at this moment. Reviewed-by:
-
Jaegeuk Kim authored
This patch removes data_version check flow during the fsync call. The original purpose for the use of data_version was to avoid writng inode pages redundantly by the fsync calls repeatedly. However, when user can modify file meta and then call fsync, we should not skip fsync procedure. So, let's remove this condition check and hope that user triggers in right manner. Signed-off-by: -
Jaegeuk Kim authored
We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by:
-
- 20 Mar, 2013 11 commits
-
-
Masanari Iida authored
Correct spelling typo in comments Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
-
Namjae Jeon authored
In function check_nid_range, there is no need to trigger BUG_ON and make kernel stop. Instead it could just check and indicate the inode number to be EINVAL. Update the return path in do_read_inode to use the return from check_nid_range. Signed-off-by:
Amit Sahrawat <a.sahrawat@samsung.com> [Jaegeuk: replace BUG_ON with WARN_ON] Signed-off-by:
-
Namjae Jeon authored
validate super block is not returning with proper values. When failure from sb_bread it should reflect there is an EIO otherwise it should return of EINVAL. Returning, '1' is not conveying proper message as the return type. Signed-off-by:
-
Namjae Jeon authored
make use of F2FS_NAME_LEN for name length checking, change return conditions at few places, by assigning storing the errorvalue in 'error' and making a common exit path. Signed-off-by:
-
Namjae Jeon authored
Change f2fs so that a warning is emitted when an attempt is made to mount a filesystem with the unsupported discard option. Signed-off-by:
-
Jaegeuk Kim authored
The fsync call should be ended after flushing the in-device caches. Reviewed-by:
-
Jaegeuk Kim authored
The build_free_nid should not add free nids over nm_i->max_nid. But, there was a hole that invalid free nid was added by the following scenario. Let's suppose nm_i->max_nid = 150 and the last NAT page has 100 ~ 200 nids. build_free_nids - get_current_nat_page loads the last NAT page - scan_nat_page can add 100 ~ 200 nids -> Bug here! So, when scanning an NAT page, we should check each candidate whether it is over max_nid or not. Reviewed-by: -
Jaegeuk Kim authored
If the return value of releasepage is equal to zero, the page cannot be reclaimed. Instead, we should return 1 in order to reclaim clean pages. Reviewed-by:
-
Jaegeuk Kim authored
When we build new free nids, let's scan the just next NAT page instead of skipping a couple of previously scanned pages in order to reuse free nids in there. Otherwise, we can use too much wide range of nids even though several nids were deallocated, and also their node pages can be cached in the node_inode's address space. This means that we can retain lots of clean pages in the main memory, which induces mm's reclaiming overhead. Signed-off-by: -
Jaegeuk Kim authored
Currently, f2fs doesn't reclaim any node pages. However, if we found that a node page was truncated by checking its block address with zero during f2fs_write_node_page, we should not skip that node page and return zero to reclaim it. Reviewed-by:
-
Jaegeuk Kim authored
This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by:
Changman Lee <cm224.lee@samsung.com> Reviewed-by:
-
- 18 Mar, 2013 8 commits
-
-
Namjae Jeon authored
In all the breaking conditions in get_node_path, 'n' is used to track index in offset[] array, but while breaking out also, in all paths n++ is done. So, remove the ++ from breaking paths. Also, avoid reset of 'level=0' in first case. Signed-off-by:
-
Jaegeuk Kim authored
The maximum filename length supported in linux is 255 characters. So let's follow that. Signed-off-by:
-
Namjae Jeon authored
Optimize and change return path in lookup_free_nid_list Signed-off-by:
-
Namjae Jeon authored
We can remove the call to find_get_page to get a page from the cache and check for up-to-date, instead we can make use of grab_cache_page part itself to fetch the page from the cache. So, removing the call and moving the PageUptodate at proper place, also taken care of moving the lock_page condition in the page_hit part. Signed-off-by:
-
Changman Lee authored
The caller of get_nid should be careful not to put lower value than NODE_DIR1_BLOCK in case of level is zero. Signed-off-by:
-
Jaegeuk Kim authored
Previously, f2fs reads several node pages ahead when get_dnode_of_data is called with RDONLY_NODE flag. And, this flag is set by the following functions. - get_data_block_ro - get_lock_data_page - do_write_data_page - truncate_blocks - truncate_hole However, this readahead mechanism is initially introduced for the use of get_data_block_ro to enhance the sequential read performance. So, let's clarify all the cases with the additional modes as follows. enum { ALLOC_NODE, /* allocate a new node page if needed */ LOOKUP_NODE, /* look up a node without readahead */ LOOKUP_NODE_RA, /* * look up a node with readahead called * by get_datablock_ro. */ } Signed-off-by: -
Jaegeuk Kim authored
The get_node_page_ra tries to: 1. grab or read a target node page for the given nid, 2. then, call ra_node_page to read other adjacent node pages in advance. So, when we try to read a target node page by #1, we should submit bio with READ_SYNC instead of READA. And, in #2, READA should be used. Signed-off-by:
-
Jaegeuk Kim authored
If the node page was truncated, its block address became zero. This means that we don't need to write the node page, but have to unlock NODE_WRITE, decrease the number of dirty node pages, and then unlock_page before returning the f2fs_write_node_page with zero. Reviewed-by:
-
- 08 Mar, 2013 1 commit
-
-
Changman Lee authored
Use div_u64 to fix overflow when calculating utilization. *long int* is 4-bytes on 32-bit so (user blocks * 100) might be overflow if disk size is over e.g. 512GB. Signed-off-by:
-
- 07 Mar, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Several boot fixes (MacBook, legacy EFI bootloaders), another please-don't-brick fix, and some minor stuff." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Do not try to sync identity map for non-mapped pages x86, doc: Be explicit about what the x86 struct boot_params requires x86: Don't clear efi_info even if the sentinel hits x86, mm: Make sure to find a 2M free block for the first mapped area x86: Fix 32-bit *_cpu_data initializers efivarfs: return accurate error code in efivarfs_fill_super() efivars: efivarfs_valid_name() should handle pstore syntax efi: be more paranoid about available space when creating variables iommu, x86: Add DMA remap fault reason x86, smpboot: Remove unused variable
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Misc radeon, nouveau, mgag200 and intel fixes. The intel fixes should contain the fix for the touchpad on the Chromebook - hey I'm an input maintainer now!" Hate to pee on your parade, Dave, but I don't think being an input maintainer is necessarily something to strive for.. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tegra: drop "select DRM_HDMI" drm: Documentation typo fixes drm/mgag200: Bug fix: Renesas board now selects native resolution. drm/mgag200: Reject modes that are too big for VRAM drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not used drm/radeon: don't check mipmap alignment if MIP_ADDRESS is FMASK drm/radeon: skip MC reset as it's probably not hung drm/radeon: add primary dac adj quirk for R200 board drm/radeon: don't set hpd, afmt interrupts when interrupts are disabled drm/i915: Turn off hsync and vsync on ADPA when disabling crt drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bits drm/i915: also disable south interrupts when handling them drm/i915: enable irqs earlier when resuming drm/i915: Increase the RC6p threshold. DRM/i915: On G45 enable cursor plane briefly after enabling the display plane. drm/nv50-: prevent some races between modesetting and page flipping drm/nouveau/i2c: drop parent refcount when creating ports drm/nv84: fix regression in page flipping drm/nouveau: Fix typo in init_idx_addr_latched(). drm/nouveau: Disable AGP on PowerPC again. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael J Wysocki: - Two fixes for the new intel_pstate driver from Dirk Brandewie. - Fix for incorrect usage of the .find_bridge() callback from struct acpi_bus_type in the USB core and subsequent removal of that callback from Rafael J Wysocki. - ACPI processor driver cleanups from Chen Gang and Syam Sidhardhan. - ACPI initialization and error messages fix from Joe Perches. - Operating Performance Points documentation improvement from Nishanth Menon. - Fixes for memory leaks and potential concurrency issues and sysfs attributes leaks during device removal in the core device PM QoS code from Rafael J Wysocki. - Calxeda Highbank cpufreq driver simplification from Emilio López. - cpufreq comment cleanup from Namhyung Kim. - Fix for a section mismatch in Calxeda Highbank interprocessor communication code from Mark Langsdorf (this is not a PM fix strictly speaking, but the code in question went in through the PM tree). * tag 'pm+acpi-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / intel_pstate: Do not load on VM that does not report max P state. cpufreq / intel_pstate: Fix intel_pstate_init() error path ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type ACPI / glue: Add .match() callback to struct acpi_bus_type ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0 ACPI / processor: Remove redundant NULL check before kfree ACPI / Sleep: Avoid interleaved message on errors PM / QoS: Remove device PM QoS sysfs attributes at the right place PM / QoS: Fix concurrency issues and memory leaks in device PM QoS cpufreq: highbank: do not initialize array with a loop PM / OPP: improve introductory documentation cpufreq: Fix a typo in comment mailbox, pl320-ipc: remove __init from probe function
-
Paul Bolle authored
Commit ac24c220 ("drm/tegra: Use generic HDMI infoframe helpers") added "select DRM_HDMI" to the DRM_TEGRA Kconfig entry. But there is no Kconfig symbol named DRM_HDMI. The select statement for that symbol is a nop. Drop it. What was needed to use HDMI functionality was to select HDMI (which this entry already did through depending on DRM) and to include linux/hdmi.h (which this commit also did). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Christopher Harvey authored
Signed-off-by:
Christopher Harvey <charvey@matrox.com> Signed-off-by:
-
