We always need to reserve the bo around a pin / unpin, so move the
reservation there.

This allows removing the vbox_fb_[un]pin helpers.

Note this means that we now no longer hold the bo reserved while
k[un]mapping it in vbox_fb.c this is fine as it is not necessary
to hold it reserved for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When vbox_set_up_input_mapping() gets called the first crtc might be
disable and not have a fb at all, triggering a NUL ptr deref at:

			vbox->input_mapping_width = CRTC_FB(crtci)->width;

Instead of using the fb from the crtc with id 0, just use the fb from
the first crtc with a fb. This is in the single_framebuffer = true path,
so all crtc-s point to the same fb anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move pin / unpin of fb out of vbox_crtc_set_base_and_mode() so that it can
be used to implement the atomic_update drm_plane_helper_func for the primary
plane.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fbdev compat fb gets pinned into VRAM at creation and then gets pinned
a second time when set as scanout buffer and unpinned when replaced, this
means its pin count never becomes less then 1, so it is always at the same
address and there is no need for the vbox_fbdev_set_base() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's expose the primary plane initialization inside the vboxvideo driver
in preparation for universal planes and atomic.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow specifying where to pin the framebuffer bo, so that this helper can
be used from the cursor code too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vbox_pm_resume() is the only caller of vbox_drm_resume(), so squash the
2 functions into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the recommended way to create the drm_device structure,
according to DRM documentation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold the driver_load / unload functions into the probe / remove functions
now that we are no longer using the deprecated drm_get_pci_dev() mechanism.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the setup of drm modesetting config from vbox_driver_load() to
vbox_mode_init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed warning found by checkpatch
Signed-off-by: André Lehmann <lenneman@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Registering the connector explicitly right after creation is not necessary
for modesetting drivers, because drm_dev_register already takes care of
this on the core side, by calling drm_modeset_register_all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

  WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
    Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
    Selected by [y]:
    - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y]
                        && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n)
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes IRQ_MSG() and its users as currently it is a no-op.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add option validation in remount. After this patch, remount
can change recognized options, and for unknown options remount
will fail and report error.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add new helper erofs_get_fault_rate() to get fault rate instead of
directly getting it from sbi, so we can remove the macro check
surrounding it.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Define a dummpy function of erofs_build_fault_attr() when macro
CONFIG_EROFS_FAULT_INJECTION is disabled, so that we don't have to
check the macro in calling place. Based on above adjustment,
do proper code cleanup for option parsing of fault_injection.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As Dan Carpenter pointed out, there is no need to propagate positive
return values back to its callers.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As Dan Carpenter pointed out, it is better to document what
return values of these callbacks in `struct xattr_iter_handlers'
mean and why it->ofs is increased regardless of success or
failure in `xattr_foreach'.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces `__should_decompress_synchronously' to
cleanup `z_erofs_vle_normalaccess_readpages'.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Multiref support means that a compressed page could have
more than one reference, which is designed for on-disk data
deduplication. However, mkfs doesn't support this mode
at this moment, and the kernel implementation is also broken.

Let's drop multiref support. If it is fully implemented
in the future, it can be reverted later.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is the only one user to use `__update_workgrp_llen'.
Fold it in `z_erofs_vle_work_iter_begin' and cleanup related code.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

some CONFIG_EROFS_FS_XATTR conditions were added because of
the historial Linux kernel compatibility, which are unneeded now.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replace BUG_ON with DBG_BUGON in data.c, and add necessary
error handler.
Signed-off-by: Chen Gong <gongchen4@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds trace points for reading zipped data.
Signed-off-by: Chen Gong <gongchen4@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently erofs only supports clustersize == blocksize.
and clustersize == 2^n * blocksize will be supported in the future.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch completes error handing code of z_erofs_do_read_page.
PG_error will be set when some read error happens, therefore
z_erofs_onlinepage_endio will unlock this page without setting
PG_uptodate.
Reviewed-by: Chao Yu <yucxhao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As described in Kconfig, the last compressed pack should be cached
for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or
`EROFS_FS_ZIP_CACHE_BIPOLAR' by design.

However, there is a bug in z_erofs_do_read_page, it will
switch `initial' to `false' at the very beginning before it decides
to cache the last compressed pack.

caching strategy should work properly after appling this patch.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch completes error handing of z_erofs_map_blocks_iter
and vle_get_logical_extent_head, including no memory and
io error cases.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch mainly introduces `vle_map_blocks_iter_ctx' to clean up
z_erofs_map_blocks_iter and vle_get_logical_extent_head.

It changes the return value of `vle_get_logical_extent_head' to int
for the later error handing. In addition, it also renames `pcn' to
`pblk' since only `pblk' exists in erofs compression ondisk format.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a missing endian conversion in
vle_get_logical_extent_head.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simplify function comments to a single line.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Wrap lines over 80 characters where appropriate to
clear checkpatch warnings.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing spaces around '|', '-', and '&' to follow kernel coding
style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use if(!x) instead of if(x == false).
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use if(x) instead of if(x == true).
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace tabs with spaces or just remove spaces in declarations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses as reported by checkpatch
and from conditionals.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simplify calcualation:  * 10 / 2  can be reduced to  * 5
Also cleans missing spaces checkpatch issues.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.17 are:

[FUNC] msleep
drivers/staging/rtl8723bs/core/rtw_pwrctrl.c, 1243:
	msleep in _rtw_pwr_wakeup
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c, 510:
	_rtw_pwr_wakeup in rtw_set_802_11_disassociate
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c, 501:
	spin_lock_bh in rtw_set_802_11_disassociate

[FUNC] msleep
drivers/staging/rtl8723bs/core/rtw_pwrctrl.c, 1255:
	msleep in _rtw_pwr_wakeup
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c, 510:
	_rtw_pwr_wakeup in rtw_set_802_11_disassociate
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c, 501:
	spin_lock_bh in rtw_set_802_11_disassociate

To fix these bugs, msleep() is replaced with mdelay().

These bugs are found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>