- 26 Jan, 2017 40 commits
-
-
Javier Martinez Canillas authored
commit 3d37d41a upstream. Commit d1f3156f ("ARM: dts: omap2: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: d1f3156f ("ARM: dts: omap2: Remove skeleton.dtsi usage") Reported-by:
Pali Rohar <pali.rohar@gmail.com> Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Javier Martinez Canillas authored
commit 23ab4c61 upstream. Commit 008a2ebc ("ARM: dts: omap3: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 008a2ebc ("ARM: dts: omap3: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit ce95077d upstream. Commit 75813028 ("ARM: dts: am4372: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 75813028 ("ARM: dts: am4372: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit c9faa84c upstream. Commit 76a8548e ("ARM: dts: omap5: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 76a8548e ("ARM: dts: omap5: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit 6c565d1a upstream. Commit da6269e7 ("ARM: dts: omap4: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: da6269e7 ("ARM: dts: omap4: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit 1d8d6d3f upstream. Commit f8bf0161 ("ARM: dts: am33xx: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: f8bf0161 ("ARM: dts: am33xx: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit 9536fd30 upstream. Commit 76155b37 ("ARM: dts: dm814x: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 76155b37 ("ARM: dts: dm814x: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit 6ed80b3a upstream. Commit 06bfb9c1 ("ARM: dts: dm816x: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 06bfb9c1 ("ARM: dts: dm816x: Remove skeleton.dtsi usage") Reported-by:
-
Javier Martinez Canillas authored
commit 7f6c857b upstream. Commit 55871eb6 ("ARM: dts: dra7: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 55871eb6 ("ARM: dts: dra7: Remove skeleton.dtsi usage") Reported-by:
-
Ilya Dryomov authored
commit 2b1e1a7c upstream. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit e15fd0a1 upstream. Signed-off-by:
-
Ilya Dryomov authored
commit d03857c6 upstream. Signed-off-by:
-
Ilya Dryomov authored
commit 4eb4517c upstream. - replace an ad-hoc array with a struct - rename to calc_signature() for consistency Signed-off-by:
-
Ilya Dryomov authored
commit 7882a26d upstream. It's going to be used as a temporary buffer for in-place en/decryption with ceph_crypt() instead of on-stack buffers, so rename to enc_buf. Ensure alignment to avoid GFP_ATOMIC allocations in the crypto stack. Signed-off-by:
-
Ilya Dryomov authored
commit a45f795c upstream. Starting with 4.9, kernel stacks may be vmalloced and therefore not guaranteed to be physically contiguous; the new CONFIG_VMAP_STACK option is enabled by default on x86. This makes it invalid to use on-stack buffers with the crypto scatterlist API, as sg_set_buf() expects a logical address and won't work with vmalloced addresses. There isn't a different (e.g. kvec-based) crypto API we could switch net/ceph/crypto.c to and the current scatterlist.h API isn't getting updated to accommodate this use case. Allocating a new header and padding for each operation is a non-starter, so do the en/decryption in-place on a single pre-assembled (header + data + padding) heap buffer. This is explicitly supported by the crypto API: "... the caller may provide the same scatter/gather list for the plaintext and cipher text. After the completion of the cipher operation, the plaintext data is replaced with the ciphertext data in case of an encryption and vice versa for a decryption." Signed-off-by:
-
Ilya Dryomov authored
commit 55d9cc83 upstream. Signed-off-by:
-
Ilya Dryomov authored
commit 462e6504 upstream. Since commit 0a990e70 ("ceph: clean up service ticket decoding"), th->session_key isn't assigned until everything is decoded. Signed-off-by:
-
Ilya Dryomov authored
commit 36721ece upstream. Pass what's going to be encrypted - that's msg_b, not ticket_blob. ceph_x_encrypt_buflen() returns the upper bound, so this doesn't change the maxlen calculation, but makes it a bit clearer. Signed-off-by:
-
Paul Donohue authored
commit 864db929 upstream. The current Alps SS5 (SS4 v2) code generates bogus TouchPad events when TrackStick packets are processed. This causes the xorg synaptics driver to print "unable to find touch point 0" and "BUG: triggered 'if (priv->num_active_touches > priv->num_slots)'" messages. It also causes unexpected TouchPad button release and re-click event sequences if the TrackStick is moved while holding a TouchPad button. This commit corrects the problem by adjusting alps_process_packet_ss4_v2() so that it only sends TrackStick reports when processing TrackStick packets. Reviewed-by:
Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dave Martin authored
commit ad9e202a upstream. We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Will Deacon <Will.Deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Dave Martin authored
commit aeb1f39d upstream. This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Fixes: 60ffc30d ("arm64: Exception handling") Signed-off-by:
-
Dave Martin authored
commit a672401c upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 5d220ff9 ("arm64: Better native ptrace support for compat tasks") Signed-off-by:
-
Dave Martin authored
commit 9dd73f72 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 766a85d7 ("arm64: ptrace: add NT_ARM_SYSTEM_CALL regset") Signed-off-by:
-
Dave Martin authored
commit 9a17b876 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
-
Mark Rutland authored
commit 7d9e8f71 upstream. Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Fixes: 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by:
Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Fabien Parent authored
commit 43849785 upstream. Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Fabien Parent <fparent@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Jean-Jacques Hiblot authored
commit 87cb1291 upstream. AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by:
Roger Quadros <rogerq@ti.com> [tony@atomide.com: updated comments with what goes wrong] Signed-off-by:
-
Jeff Layton authored
commit 6df8c9d8 upstream. sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
-
Bryant G. Ly authored
commit 387b978c upstream. Current code incorrectly calculates the max transfer length, since it is assuming a 4k page table, but ppc64 all run on 64k page tables. Reported-by:
Steven Royer <seroyer@linux.vnet.ibm.com> Tested-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Bryant G. Ly authored
commit a5b0e406 upstream. Currently, dma_alloc_coherent is being called with a GFP_KERNEL flag which allows it to sleep in an interrupt context, need to change to GFP_ATOMIC. Tested-by:
Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by:
-
Mark Rutland authored
commit ddc37832 upstream. On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an undefined instruction trap within write_wb_reg. This is because Scorpion CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if the core is not powered down. When DBGPRSR.SPD is set, breakpoint and watchpoint registers are treated as undefined. It's possible to trigger similar crashes later on from userspace, by requesting the kernel to install a breakpoint or watchpoint, as we can go idle at any point between the reset of the debug registers and their later use. This has always been the case. Given that this has always been broken, no-one has complained until now, and there is no clear workaround, disable hardware breakpoints and watchpoints on Scorpion to avoid these issues. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Sriharsha Basavapatna authored
commit ce1ca7d2 upstream. In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes svc_rdma_put_frmr() which in turn tries to unmap the same sg list through ib_dma_unmap_sg() again. This second unmap is invalid and could lead to problems when the iova being unmapped is subsequently reused. Remove the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr() handle it. Fixes: 412a15c0 ("svcrdma: Port to new memory registration API") Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Joonyoung Shim authored
commit bc7c36ee upstream. When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Richard Weinberger authored
commit 1cb51a15 upstream. When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Rock Lee <rockdotlee@gmail.com> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Johannes Berg authored
commit eeb0d56f upstream. In AP (or VLAN) mode, when unicast 802.11 packets are received, they might actually be multicast after conversion. In this case the fast-RX path didn't handle them properly to send them back to the wireless medium. Implement that by copying the SKB and sending it back out. The possible alternative would be to just punt the packet back to the regular (slow) RX path, but since we have almost all of the required code here already it's not so complicated to add here. Punting it back would also mean acquiring the spinlock, which would be bad for the stated purpose of the fast-RX path, to enable well-performing parallel RX. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Quinn Tran authored
commit fc1ffd6c upstream. During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0 [1469877.852562] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [<ffffffff81319c89>] pci_call_probe+0x89/0xb0 Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by:
-
Ruslan Ruslichenko authored
commit 020eb3da upstream. commit d32932d0 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by:
Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.comSigned-off-by:
-
Anton Blanchard authored
commit 178f3582 upstream. IBM bit 31 (for the rest of us - bit 0) is a reserved field in the instruction definition of mtspr and mfspr. Hardware is encouraged to (and does) ignore it. As a result, if userspace executes an mtspr DSCR with the reserved bit set, we get a DSCR facility unavailable exception. The kernel fails to match against the expected value/mask, and we silently return to userspace to try and re-execute the same mtspr DSCR instruction. We loop forever until the process is killed. We should do something here, and it seems mirroring what hardware does is the better option vs killing the process. While here, relax the matching of mfspr PVR too. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dave Martin authored
commit b34ca601 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the check pointed registers, the thread's old check pointed registers are preserved. Fixes: 9d3918f7 ("powerpc/ptrace: Enable support for NT_PPC_CVSX") Fixes: 19cbcbf7 ("powerpc/ptrace: Enable support for NT_PPC_CFPR") Signed-off-by:
-
Dave Martin authored
commit 99dfe80a upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: c6e6771b ("powerpc: Introduce VSX thread_struct and CONFIG_VSX") Signed-off-by:
-
