- 13 Apr, 2023 19 commits
-
-
Johannes Berg authored
Some drivers like iwlwifi might have per-STA queues, so we may want to flush/drop just those queues rather than all when removing a station. Add a separate method for that. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When we remove a station, we first make it unreachable, then we (must) remove its keys, and then remove the station itself. Depending on the hardware design, if we have hardware crypto at all, frames still sitting on hardware queues may then be transmitted without a valid key, possibly unencrypted or with a fixed key. Fix this by flushing the queues when removing stations so this cannot happen. Signed-off-by: -
Johannes Berg authored
The checks of whether or not a frame is bufferable were not taking into account that some action frames aren't, such as FTM. Check this, which requires some changes to the function ieee80211_is_bufferable_mmpdu() since we need the whole skb for the checks now. Reviewed-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Johannes Berg authored
WLAN_PUBLIC_ACTION_FTM_RESPONSE is duplicated with WLAN_PUB_ACTION_FTM, but that might better be called WLAN_PUB_ACTION_FTM_RESPONSE; clean up here. Signed-off-by: -
Avraham Stern authored
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols which results in a warning. Fix it. Fixes: b6f5b647 ("iwlwifi: mvm: handle RX checksum on Bz devices") Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeidSigned-off-by:
-
Avraham Stern authored
When the IPC registers are used for sleep control, setting the IPC sleep bit already triggers an interrupt to the fw, so there is no need to also set the doorbell. Setting also the doorbell triggers the sleep interrupt twice which lead to an assert. Fixes: af08571d ("iwlwifi: pcie: support Bz suspend/resume trigger") Signed-off-by:
-
Mukesh Sisodiya authored
Correction in config data is done for loading the ucode. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Mukesh Sisodiya authored
PHY configuration command need to be sent to FW if the tx diversity with SISO is supported. This need to be sent to get the init notification from FW. Signed-off-by:
-
Mukesh Sisodiya authored
Need to move a function definition and actual changes will be done in following commit. Signed-off-by:
-
Daniel Gabay authored
Max A-MPDU length exponent shall be set to 2 for EHT capable device on 6GHz band in order to support 4MB aggregation. Update HE MAC capabilities accordingly for station and softap interfaces. This change requires to add another ieee80211_sband_iftype_data for uhb since high/uhb are no longer the same. Signed-off-by:
Daniel Gabay <daniel.gabay@intel.com> Signed-off-by:
-
Johannes Berg authored
There are two modes now, and we have two places checking that must be in sync. Refactor the logic into a new small helper function. Signed-off-by:
-
Johannes Berg authored
Since Gl A-step devices use the old checksum hardware, we shouldn't use the Bz code to check for A-MSDU combining ability; fix that. Fixes: ec18e7d4 ("wifi: iwlwifi: mvm: use old checksum for Bz A-step") Signed-off-by:
-
Golan Ben Ami authored
B step doesn't support full checksum yet, move to c step. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
-
Avraham Stern authored
IEEE80211_TX_CTL_NO_CCK_RATE indicates that CCK rates should not be used, but is ignored by the driver. Fix it. Signed-off-by:
-
Johannes Berg authored
On queue remove, we should convert the TID value to the firmware value (8 -> 15) just like we do on queue add. Otherwise, the firmware will not be able to find the correct queue to remove. Signed-off-by:
-
Mukesh Sisodiya authored
update the device configuration for HR1 device for SO and SOF device. QuZ device configuration is corrected to support specific CRF. Signed-off-by:
-
Miri Korenblit authored
This function receives the queue id to reclaim packets from. Currently we're passing to it the queue id we received from the FW in the flush response. We don't do any check of this value and it might be invalid. In such case we will refer to a pointer to a queue which might be NULL. Fix this by adding a validity check of the queue id before using it. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Johannes Berg authored
Initially, 160/320 MHz in AP mode were not supported. After testing, enable the wider bandwidths in AP mode as well. Signed-off-by:
-
Johannes Berg authored
In __iwl_err(), if we rate-limit the message away, then vaf.va is still NULL-initialized by the time we get to the tracing code, which then crashes. When it doesn't get rate-limited out, it's still wrong to reuse the old args2 that was already printed, which is why we bother making a copy in the first place. Assign vaf.va properly to fix this. Fixes: e5f1cc98 ("iwlwifi: allow rate-limited error messages") Signed-off-by:
-
- 12 Apr, 2023 9 commits
-
-
Martin Blumenstingl authored
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Tested-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-10-martin.blumenstingl@googlemail.com
-
Martin Blumenstingl authored
Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822C chipset code. Reviewed-by:
-
Jernej Skrabec authored
Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822B chipset code. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
-
Martin Blumenstingl authored
Add the SDIO vendor ID for Realtek and some device IDs extracted from their GPL vendor driver. This will be useful in the future when the rtw88 driver gains support for these chips. Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
For SDIO host controllers with DMA support the TX buffer physical memory address need to be aligned at an 8-byte boundary. Reserve 8 bytes of extra TX headroom so we can align the data without re-allocating the transmit buffer. While here, also remove the TODO comment regarding extra headroom for USB and SDIO. For SDIO the extra headroom is now handled and for USB it was not needed so far. Reviewed-by:
-
Martin Blumenstingl authored
Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO based chipsets. Reviewed-by:
-
Martin Blumenstingl authored
Add the code specific to SDIO HCI in the MAC power on sequence. This is based on the RTL8822BS and RTL8822CS vendor drivers. Co-developed-by:
-
Martin Blumenstingl authored
Add a sub-driver for SDIO based chipsets which implements the following functionality: - register accessors for 8, 16 and 32 bits for all states of the card (including usage of 4x 8 bit access for one 32 bit buffer if the card is not fully powered on yet - or if it's fully powered on then 1x 32 bit access is used) - checking whether there's space in the TX FIFO queue to transmit data - transfers from the host to the device for actual network traffic, reserved pages (for firmware download) and H2C (host-to-card) transfers - receiving data from the device - deep power saving state The transmit path is optimized so DMA-capable SDIO host controllers can directly use the buffers provided because the buffer's physical addresses are 8 byte aligned. The receive path is prepared to support RX aggregation where the chipset combines multiple MAC frames into one bigger buffer to reduce SDIO transfer overhead. Co-developed-by:
-
Martin Blumenstingl authored
The SDIO HCI implementation needs to know when the MAC is powered on. This is needed because 32-bit register access has to be split into 4x 8-bit register access when the MAC is not fully powered on or while powering off. When the MAC is powered on 32-bit register access can be used to reduce the number of transfers but splitting into 4x 8-bit register access still works in that case. During the power on sequence is how RTW_FLAG_POWERON is only set when the power on sequence has completed successfully. During power off however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI implementation does not know that it has to use 4x 8-bit register accessors. Clear the RTW_FLAG_POWERON flag early when powering off the MAC so the whole power off sequence is processed with RTW_FLAG_POWERON unset. This will make it possible to use the RTW_FLAG_POWERON flag in the upcoming SDIO HCI implementation. Note that a failure in rtw_pwr_seq_parser() while applying chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON flag being cleared while the chip is still powered on. However, depending on when the failure occurs in the power off sequence the chip may be on or off. Even the original approach of clearing RTW_FLAG_POWERON only when the power off sequence has been applied successfully could end up in some corner case where the chip is powered off but RTW_FLAG_POWERON was not cleared. Reviewed-by:
-
- 11 Apr, 2023 4 commits
-
-
Aloka Dixit authored
Set 'eht_support' flag if EHT capabilities are present. Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230410200332.32265-1-quic_alokad@quicinc.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported a NULL dereference caused by a missing check in hwsim_pmsr_report_nl(), and bisected the issue to cited commit. v2: test the nlattr before using nla_data() on it (Simon Horman) general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5084 Comm: syz-executor104 Not tainted 6.3.0-rc4-next-20230331-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:jhash+0x339/0x610 include/linux/jhash.h:95 Code: 83 fd 01 0f 84 5f ff ff ff eb de 83 fd 05 74 3a e8 ac f5 71 fd 48 8d 7b 05 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 96 02 00 00 RSP: 0018:ffffc90003abf298 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff84111ba4 RDI: 0000000000000009 RBP: 0000000000000006 R08: 0000000000000005 R09: 000000000000000c R10: 0000000000000006 R11: 0000000000000000 R12: 000000004d2c27cd R13: 000000002bd9e6c2 R14: 000000002bd9e6c2 R15: 000000002bd9e6c2 FS: 0000555556847300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000078aa6000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] get_hwsim_data_ref_from_addr+0xb9/0x600 drivers/net/wireless/virtual/mac80211_hwsim.c:757 hwsim_pmsr_report_nl+0xe7/0xd50 drivers/net/wireless/virtual/mac80211_hwsim.c:3764 genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968 genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0xde/0x190 net/socket.c:747 ____sys_sendmsg+0x71c/0x900 net/socket.c:2501 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2555 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2af3b2a6 ("mac80211_hwsim: add PMSR report support via virtio") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jaewan Kim <jaewan@google.com> Cc: Johannes Berg <johannes.berg@intel.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230404171658.917361-1-edumazet@google.comSigned-off-by:
-
Gregory Greenman authored
There're two identical entries for ax1650 device in iwl_dev_info_table. Remove one of the duplicate entries. Fixes: 953e66a7 ("iwlwifi: add new ax1650 killer device") Signed-off-by:
-
Gregory Greenman authored
Host commands and notifications are expected to be ordered in iwl_mvm_groups array. Fix the order of two new TIMING_MEASUREMENT notifications. Fixes: c7eca79d ("wifi: iwlwifi: mvm: report hardware timestamps in RX/TX status") Reported-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/linux-wireless/20230331175121.GA3127046@dev-arch.thelio-3990X/Signed-off-by:
-
- 06 Apr, 2023 7 commits
-
-
Shenwei Wang authored
The patch addresses an issue with the reset logic on the i.MX93 SoC, which requires configuration of the correct interface speed under RMII mode to complete the reset. The patch implements a fix_soc_reset function and uses it specifically for the i.MX93 SoCs. Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Shenwei Wang authored
This patch adds support for platform-specific reset logic in the stmmac driver. Some SoCs require a different reset mechanism than the standard dwmac IP reset. To support these platforms, a new function pointer 'fix_soc_reset' is added to the plat_stmmacenet_data structure. The stmmac_reset in hwif.h is modified to call the 'fix_soc_reset' function if it exists. This enables the driver to use the platform-specific reset logic when necessary. Signed-off-by:
-
Pedro Tammela authored
For the sake of readability, use the netlink payload helpers from the 'nla_get_*()' family to parse the attributes. tdc results: 1..5 ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues) ok 2 453a - Delete nonexistent mqprio Qdisc ok 3 5292 - Delete mqprio Qdisc twice ok 4 45a9 - Add mqprio Qdisc to single-queue device ok 5 2ba9 - Show mqprio class Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
-
Rob Herring authored
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as no immediate child nodes have an address. What was probably intended was to put them in the 'ports' node, but that's not necessary as that is covered by ethernet-switch.yaml via dsa.yaml. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The schema doesn't allow for a single (unaddressed) ethernet port node nor does a single port switch make much sense. So if there's always multiple child nodes, "#address-cells" and "#size-cells" should be required. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 Smaller pull request this time, sending this early to fix the conflict in mac80211. Nothing really special this time, only smaller changes. * enable Wi-Fi 7 (EHT) mesh support * tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits) wifi: rt2x00: Fix memory leak when handling surveys wifi: b43legacy: Remove the unused function prev_slot() wifi: rtw89: Remove redundant pci_clear_master wifi: rtw89: fix potential race condition between napi_init and napi_enable wifi: rtw89: config EDCCA threshold during scan to prevent TX failed wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering wifi: rtw89: remove superfluous H2C of join_info wifi: rtw89: set data lowest rate according to AP supported rate wifi: rtw89: add counters of register-based H2C/C2H wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1 wifi: rtw89: coex: Add report control v5 variation wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B bcma: remove unused mips_read32 function bcma: Use of_address_to_resource() wifi: mwifiex: remove unused evt_buf variable wifi: brcmsmac: ampdu: remove unused suc_mpdu variable wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg() wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg() ... ==================== Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.deSigned-off-by:
-
- 05 Apr, 2023 1 commit
-
-
Simon Horman authored
The arguments passed to the trace events are of type unsigned int, however the signature of the events used __le32 parameters. I may be missing the point here, but sparse flagged this and it does seem incorrect to me. net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h): ./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32 ./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer ./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer ... (a lot more similar warnings) net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service net/qrtr/ns.c:115:47: got unsigned int service net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types) ... (a lot more similar warnings) Fixes: dfddb540 ("net: qrtr: Add tracepoint support") Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.orgSigned-off-by:
-
