ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g.  by
Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16
commands with UNMAP bit set. It should not be treated as a path
error. In general, it makes sense to assume that being write protected
is a target rather than a path property.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 0e9973ed ("scsi: aacraid: Add periodic checks to see IOP reset
status") changed the way driver checks if a reset succeeded. Now, after an
IOP reset, aacraid immediately start polling a register to verify the reset
is complete.

This behavior cause regressions on the reset path in PowerPC (at least).
Since the delay after the IOP reset was removed by the aforementioned patch,
the fact driver just starts to read a register instantly after the reset
was issued (by writing in another register) "corrupts" the reset procedure,
which ends up failing all the time.

The issue highly impacted kdump on PowerPC, since on kdump path we
proactively issue a reset in adapter (through the reset_devices kernel
parameter).

This patch (re-)adds a delay right after IOP reset is issued. Empirically
we measured that 3 seconds is enough, but for safety reasons we delay
for 5s (and since it was 30s before, 5s is still a small amount).

For reference, without this patch we observe the following messages
on kdump kernel boot process:

  [ 76.294] aacraid 0003:01:00.0: IOP reset failed
  [ 76.294] aacraid 0003:01:00.0: ARC Reset attempt failed
  [ 86.524] aacraid 0003:01:00.0: adapter kernel panic'd ff.
  [ 86.524] aacraid 0003:01:00.0: Controller reset type is 3
  [ 86.524] aacraid 0003:01:00.0: Issuing IOP reset
  [146.534] aacraid 0003:01:00.0: IOP reset failed
  [146.534] aacraid 0003:01:00.0: ARC Reset attempt failed

Fixes: 0e9973ed ("scsi: aacraid: Add periodic checks to see IOP reset status")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

During failover there is a small race window between fc_remote_port_add()
and fc_timeout_deleted_rport(); the latter drops the lock after setting the
port to NOTPRESENT, so if fc_remote_port_add() is called right at that time
it will fail to detect the existing rport and happily adding a new
structure, causing rports to get registered twice.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When an rport is found in the bindings array there is no guarantee that
it had been a target port, so we need to call fc_remote_port_rolechg()
here to ensure the scsi_target_id is set correctly.  Otherwise the port
will never be scanned.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ChunYu found a kernel crash by syzkaller:

[  651.617875] kasan: CONFIG_KASAN_INLINE enabled
[  651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  651.618731] general protection fault: 0000 [#1] SMP KASAN
[  651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32
[  651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  651.622309] task: ffff880117780000 task.stack: ffff8800a3188000
[  651.622762] RIP: 0010:skb_release_data+0x26c/0x590
[...]
[  651.627260] Call Trace:
[  651.629156]  skb_release_all+0x4f/0x60
[  651.629450]  consume_skb+0x1a5/0x600
[  651.630705]  netlink_unicast+0x505/0x720
[  651.632345]  netlink_sendmsg+0xab2/0xe70
[  651.633704]  sock_sendmsg+0xcf/0x110
[  651.633942]  ___sys_sendmsg+0x833/0x980
[  651.637117]  __sys_sendmsg+0xf3/0x240
[  651.638820]  SyS_sendmsg+0x32/0x50
[  651.639048]  entry_SYSCALL_64_fastpath+0x1f/0xc2

It's caused by skb_shared_info at the end of sk_buff was overwritten by
ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx.

During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh),
ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a
new value to skb_shinfo(SKB)->nr_frags by ev->type.

This patch is to fix it by checking nlh->nlmsg_len properly there to
avoid over accessing sk_buff.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix possible indexing array of bound for &aac->hba_map[bus][cid], where
bus and cid boundary check happens later.

Fixes: 0d643ff3 ("scsi: aacraid: use aac_tmf_callback for reset fib")
Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Internal error codes happen to be positive, thus the PCI driver core
won't treat them as failure, but we do. This would cause a crash later
on as lpfc_pci_remove_one() is called (e.g. as shutdown function).

Fixes: 6d368e53 ("[SCSI] lpfc 8.3.24: Add resource extent support")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The logic for supporting large drives was previously tied to 4Kn support
for SmartIOC-2000. As SmartIOC-2000 does not support volumes using 4Kn
drives, use the intended option flag AAC_OPT_NEW_COMM_64 to determine
support for volumes greater than 2T.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is
returned; the remaining part will then contain stale kernel memory
information.  This patch zeroes out the entire table to avoid this
issue.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Factor out sg_fill_request_table() for better readability.

[mkp: typos, applied by hand]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

After series of changes around WRITE_SAME and UNMAP setup we ended up
with leftover unnecessary condition. Remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A cleanup patch introduced a fatal typo from inbalanced curly braces:

drivers/scsi/arm/acornscsi.c: In function 'acornscsi_host_reset':
drivers/scsi/arm/acornscsi.c:2773:1: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
drivers/scsi/arm/acornscsi.c:2795:12: error: invalid storage class for function 'acornscsi_show_info'
 static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance)

The same patch incorrectly changed the argument type of the reset
handler, as shown by this warning:

drivers/scsi/arm/acornscsi.c:2888:27: error: initialization of 'int (*)(struct scsi_cmnd *)' from incompatible pointer type 'int (*)(struct Scsi_Host *)' [-Werror=incompatible-pointer-types]
  .eh_host_reset_handler = acornscsi_host_reset,

This removes one the extraneous opening brace and reverts the
argument type change.

[mkp: fixed checkpatch complaint]

Fixes: 74fa80ee ("scsi: acornscsi: move bus reset to host reset")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

bsg-lib now embeddeds the job structure into the request, and
req->special can't be used anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Another merge window, another MAINTAINERS file disaster.

People have serious problems with the alphabet and sorting, and poor
Jérôme Glisse and Radim Krčmář get their names mangled by locale issues,
turning them into some mangled mess (probably others do too, but those
two stood out when sorting things again).

And we now have two copies of the same 'AS3645A LED FLASH CONTROLLER
DRIVER' in the tree and in the MAINTAINERS file, but that's a separate
issue - the duplication is real, and I left them as two entries for the
same name.

This does not try to sort the actual section pattern entries, although I
may end up doing that later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clk updates from Stephen Boyd:
 "The diff is dominated by the Allwinner A10/A20 SoCs getting converted
  to the sunxi-ng framework. Otherwise, the heavy hitters are various
  drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
  some other new clk drivers in here too but overall this is just a
  bunch of clk drivers for various different pieces of hardware and a
  collection of non-critical fixes for clk drivers.

  New Drivers:
   - Allwinner R40 SoCs
   - Renesas R-Car Gen3 USB 2.0 clock selector PHY
   - Atmel AT91 audio PLL
   - Uniphier PXs3 SoCs
   - ARC HSDK Board PLLs
   - AXS10X Board PLLs
   - STMicroelectronics STM32H743 SoCs

  Removed Drivers:
   - Non-compiling mb86s7x support

  Updates:
   - Allwinner A10/A20 SoCs converted to sunxi-ng framework
   - Allwinner H3 CPU clk fixes
   - Renesas R-Car D3 SoC
   - Renesas V2H and M3-W modules
   - Samsung Exynos5420/5422/5800 audio fixes
   - Rockchip fractional clk approximation fixes
   - Rockchip rk3126 SoC support within the rk3128 driver
   - Amlogic gxbb CEC32 and sd_emmc clks
   - Amlogic meson8b reset controller support
   - IDT VersaClock 5P49V5925/5P49V6901 support
   - Qualcomm MSM8996 SMMU clks
   - Various 'const' applications for struct clk_ops
   - si5351 PLL reset bugfix
   - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
   - Assorted Tegra clk driver fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
  clk: si5351: fix PLL reset
  ASoC: atmel-classd: remove aclk clock
  ASoC: atmel-classd: remove aclk clock from DT binding
  clk: at91: clk-generated: make gclk determine audio_pll rate
  clk: at91: clk-generated: create function to find best_diff
  clk: at91: add audio pll clock drivers
  dt-bindings: clk: at91: add audio plls to the compatible list
  clk: at91: clk-generated: remove useless divisor loop
  clk: mb86s7x: Drop non-building driver
  clk: ti: check for null return in strrchr to avoid null dereferencing
  clk: Don't write error code into divider register
  clk: uniphier: add video input subsystem clock
  clk: uniphier: add audio system clock
  clk: stm32h7: Add stm32h743 clock driver
  clk: gate: expose clk_gate_ops::is_enabled
  clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
  clk: uniphier: add PXs3 clock data
  clk: hi6220: change watchdog clock source
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  clk: cs2000: Add cs2000_set_saved_rate
  ...

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - remove .open() and .release() RTC ops
   - constify i2c_device_id

  New driver:
   - Realtek RTD1295
   - Android emulator (goldfish) RTC

  Drivers:
   - ds1307: Beginning of a huge cleanup
   - s35390a: handle invalid RTC time
   - sun6i: external oscillator gate support"

* tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
  rtc: ds1307: use octal permissions
  rtc: ds1307: fix braces
  rtc: ds1307: fix alignments and blank lines
  rtc: ds1307: use BIT
  rtc: ds1307: use u32
  rtc: ds1307: use sizeof
  rtc: ds1307: remove regs member
  rtc: Add Realtek RTD1295
  dt-bindings: rtc: Add Realtek RTD1295
  rtc: sun6i: Add support for the external oscillator gate
  rtc: goldfish: Add RTC driver for Android emulator
  dt-bindings: Add device tree binding for Goldfish RTC driver
  rtc: ds1307: add basic support for ds1341 chip
  rtc: ds1307: remove member nvram_offset from struct ds1307
  rtc: ds1307: factor out offset to struct chip_desc
  rtc: ds1307: factor out rtc_ops to struct chip_desc
  rtc: ds1307: factor out irq_handler to struct chip_desc
  rtc: ds1307: improve irq setup
  rtc: ds1307: constify struct chip_desc variables
  rtc: ds1307: improve trickle charger initialization
  ...

Pull sound fixes from Takashi Iwai:
 "Most of the commits are trivial cleanup patches, while one commit is a
  significant fix for the race at ALSA sequencer that was spotted by
  syzkaller"

* tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Cancel pending autoload work at unbinding device
  ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex()
  ALSA: asihpi: Kill BUG_ON() usages
  ALSA: core: Use %pS printk format for direct addresses
  ALSA: ymfpci: Use common error handling code in snd_ymfpci_create()
  ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe()
  ALSA: 6fire: Use common error handling code in usb6fire_chip_probe()
  ALSA: usx2y: Use common error handling code in submit_urbs()
  ALSA: us122l: Use common error handling code in us122l_create_card()
  ALSA: hdspm: Use common error handling code in snd_hdspm_probe()
  ALSA: rme9652: Use common code in hdsp_get_iobox_version()
  ALSA: maestro3: Use common error handling code in two functions

Pull SCSI fixes from James Bottomley:
 "A tiny update: one patch corrects a Kconfig problem with the shift of
  the SAS SMP code to BSG and the other removes a vestige of user space
  target mode"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_transport_sas: select BLK_DEV_BSGLIB
  scsi: Remove Scsi_Host.uspace_req_q

Pull block fixes from Jens Axboe:
 "Small collection of fixes that would be nice to have in -rc1. This
  contains:

   - NVMe pull request form Christoph, mostly with fixes for nvme-pci,
     host memory buffer in particular.

   - Error handling fixup for cgwb_create(), in case allocation of 'wb'
     fails. From Christophe Jaillet.

   - Ensure that trace_block_getrq() gets the 'dev' in an appropriate
     fashion, to avoid a potential NULL deref. From Greg Thelen.

   - Regression fix for dm-mq with blk-mq, fixing a problem with
     stacking IO schedulers. From me.

   - string.h fixup, fixing an issue with memcpy_and_pad(). This
     original change came in through an NVMe dependency, which is why
     I'm including it here. From Martin Wilck.

   - Fix potential int overflow in __blkdev_sectors_to_bio_pages(), from
     Mikulas.

   - MBR enable fix for sed-opal, from Scott"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: directly insert blk-mq request from blk_insert_cloned_request()
  mm/backing-dev.c: fix an error handling path in 'cgwb_create()'
  string.h: un-fortify memcpy_and_pad
  nvme-pci: implement the HMB entry number and size limitations
  nvme-pci: propagate (some) errors from host memory buffer setup
  nvme-pci: use appropriate initial chunk size for HMB allocation
  nvme-pci: fix host memory buffer allocation fallback
  nvme: fix lightnvm check
  block: fix integer overflow in __blkdev_sectors_to_bio_pages()
  block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabled
  block: tolerate tracing of NULL bio

Pull documentation fixes from Jonathan Corbet:
 "A cleanup from Mauro that needed to wait for the media pull, plus a
  handful of other fixes that wandered in"

* tag 'docs-4.14' of git://git.lwn.net/linux:
  kokr/memory-barriers.txt: Apply atomic_t.txt change
  kokr/doc: Update memory-barriers.txt for read-to-write dependencies
  docs-rst: don't require adjustbox anymore
  docs-rst: conf.py: only setup notice box colors if Sphinx < 1.6
  docs-rst: conf.py: remove lscape from LaTeX preamble

Pull fuse updates from Miklos Szeredi:
 "This fixes a regression (spotted by the Sandstorm.io folks) in the pid
  namespace handling introduced in 4.12.

  There's also a fix for honoring sync/dsync flags for pwritev2()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: getattr cleanup
  fuse: honor iocb sync flags on write
  fuse: allow server to run in different pid_ns

Pull overlayfs updates from Miklos Szeredi:
 "This fixes d_ino correctness in readdir, which brings overlayfs on par
  with normal filesystems regarding inode number semantics, as long as
  all layers are on the same filesystem.

  There are also some bug fixes, one in particular (random ioctl's
  shouldn't be able to modify lower layers) that touches some vfs code,
  but of course no-op for non-overlay fs"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix false positive ESTALE on lookup
  ovl: don't allow writing ioctl on lower layer
  ovl: fix relatime for directories
  vfs: add flags to d_real()
  ovl: cleanup d_real for negative
  ovl: constant d_ino for non-merge dirs
  ovl: constant d_ino across copy up
  ovl: fix readdir error value
  ovl: check snprintf return

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've mostly tuned f2fs to provide better user
  experience for Android. Especially, we've worked on atomic write
  feature again with SQLite community in order to support it officially.
  And we added or modified several facilities to analyze and enhance IO
  behaviors.

  Major changes include:
   - add app/fs io stat
   - add inode checksum feature
   - support project/journalled quota
   - enhance atomic write with new ioctl() which exposes feature set
   - enhance background gc/discard/fstrim flows with new gc_urgent mode
   - add F2FS_IOC_FS{GET,SET}XATTR
   - fix some quota flows"

* tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
  f2fs: hurry up to issue discard after io interruption
  f2fs: fix to show correct discard_granularity in sysfs
  f2fs: detect dirty inode in evict_inode
  f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared
  f2fs: speed up gc_urgent mode with SSR
  f2fs: better to wait for fstrim completion
  f2fs: avoid race in between read xattr & write xattr
  f2fs: make get_lock_data_page to handle encrypted inode
  f2fs: use generic terms used for encrypted block management
  f2fs: introduce f2fs_encrypted_file for clean-up
  Revert "f2fs: add a new function get_ssr_cost"
  f2fs: constify super_operations
  f2fs: fix to wake up all sleeping flusher
  f2fs: avoid race in between atomic_read & atomic_inc
  f2fs: remove unneeded parameter of change_curseg
  f2fs: update i_flags correctly
  f2fs: don't check inode's checksum if it was dirtied or writebacked
  f2fs: don't need to update inode checksum for recovery
  f2fs: trigger fdatasync for non-atomic_write file
  f2fs: fix to avoid race in between aio and gc
  ...

Pull ceph updates from Ilya Dryomov:
 "The highlights include:

   - a large series of fixes and improvements to the snapshot-handling
     code (Zheng Yan)

   - individual read/write OSD requests passed down to libceph are now
     limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan)

   - encode MStatfs v2 message to allow for more accurate space usage
     reporting (Douglas Fuller)

   - switch to the new writeback error tracking infrastructure (Jeff
     Layton)"

* tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits)
  ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap
  ceph: wait on writeback after writing snapshot data
  ceph: fix capsnap dirty pages accounting
  ceph: ignore wbc->range_{start,end} when write back snapshot data
  ceph: fix "range cyclic" mode writepages
  ceph: cleanup local variables in ceph_writepages_start()
  ceph: optimize pagevec iterating in ceph_writepages_start()
  ceph: make writepage_nounlock() invalidate page that beyonds EOF
  ceph: properly get capsnap's size in get_oldest_context()
  ceph: remove stale check in ceph_invalidatepage()
  ceph: queue cap snap only when snap realm's context changes
  ceph: handle race between vmtruncate and queuing cap snap
  ceph: fix message order check in handle_cap_export()
  ceph: fix NULL pointer dereference in ceph_flush_snaps()
  ceph: adjust 36 checks for NULL pointers
  ceph: delete an unnecessary return statement in update_dentry_lease()
  ceph: ENOMEM pr_err in __get_or_create_frag() is redundant
  ceph: check negative offsets in ceph_llseek()
  ceph: more accurate statfs
  ceph: properly set snap follows for cap reconnect
  ...

If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on
a directory in a filesystem that does not have a realtime device and
create a new file in that directory, it gets marked as a real time file.
When data is written and a fsync is issued, the filesystem attempts to
flush a non-existent rt device during the fsync process.

This results in a crash dereferencing a null buftarg pointer in
xfs_blkdev_issue_flush():

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: xfs_blkdev_issue_flush+0xd/0x20
  .....
  Call Trace:
    xfs_file_fsync+0x188/0x1c0
    vfs_fsync_range+0x3b/0xa0
    do_fsync+0x3d/0x70
    SyS_fsync+0x10/0x20
    do_syscall_64+0x4d/0xb0
    entry_SYSCALL64_slow_path+0x25/0x25

Setting RT inode flags does not require special privileges so any
unprivileged user can cause this oops to occur.  To reproduce, confirm
kernel is compiled with CONFIG_XFS_RT=y and run:

  # mkfs.xfs -f /dev/pmem0
  # mount /dev/pmem0 /mnt/test
  # mkdir /mnt/test/foo
  # xfs_io -c 'chattr +t' /mnt/test/foo
  # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar

Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait.

Kernels built with CONFIG_XFS_RT=n are not exposed to this bug.

Fixes: f538d4da ("[XFS] write barrier support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Wareing <rwareing@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping updates from Christoph Hellwig:

 - removal of the old dma_alloc_noncoherent interface

 - remove unused flags to dma_declare_coherent_memory

 - restrict OF DMA configuration to specific physical busses

 - use the iommu mailing list for dma-mapping questions and patches

* tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping:
  dma-coherent: fix dma_declare_coherent_memory() logic error
  ARM: imx: mx31moboard: Remove unused 'dma' variable
  dma-coherent: remove an unused variable
  MAINTAINERS: use the iommu list for the dma-mapping subsystem
  dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags
  dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag
  of: restrict DMA configuration
  dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent
  i825xx: switch to switch to dma_alloc_attrs
  au1000_eth: switch to dma_alloc_attrs
  sgiseeq: switch to dma_alloc_attrs
  dma-mapping: reduce dma_mapping_error inline bloat

Pull uuid updates from Christoph Hellwig:
 "Just a single conversion to the new UUID API for this merge window"

* tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid:
  efi: switch to use new generic UUID API

Pull selinux updates from Paul Moore:
 "A relatively quiet period for SELinux, 11 patches with only two/three
  having any substantive changes.

  These noteworthy changes include another tweak to the NNP/nosuid
  handling, per-file labeling for cgroups, and an object class fix for
  AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or
  administrative updates (Stephen's email update explains the file
  explosion in the diffstat).

  Everything passes the selinux-testsuite"

[ Also a couple of small patches from the security tree from Tetsuo
  Handa for Tomoyo and LSM cleanup. The separation of security policy
  updates wasn't all that clean - Linus ]

* tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: constify nf_hook_ops
  selinux: allow per-file labeling for cgroupfs
  lsm_audit: update my email address
  selinux: update my email address
  MAINTAINERS: update the NetLabel and Labeled Networking information
  selinux: use GFP_NOWAIT in the AVC kmem_caches
  selinux: Generalize support for NNP/nosuid SELinux domain transitions
  selinux: genheaders should fail if too many permissions are defined
  selinux: update the selinux info in MAINTAINERS
  credits: update Paul Moore's info
  selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets
  tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst
  LSM: Remove security_task_create() hook.

Pull x86 fixes from Ingo Molnar:
 "Two fixes: dead code removal, plus a SME memory encryption fix on
  32-bit kernels that crashed Xen guests"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Remove unused and undefined __generic_processor_info() declaration
  x86/mm: Make the SME mask a u64

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - fix a suspend/resume cpusets bug

   - fix a !CONFIG_NUMA_BALANCING bug

   - fix a kerneldoc warning"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix nuisance kernel-doc warning
  sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
  sched/fair: Fix wake_affine_llc() balancing rules

Pull perf tooling updates from Ingo Molnar:
 "Perf tooling updates and fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
  perf stat: Only auto-merge events that are PMU aliases
  perf test: Add test case for PERF_SAMPLE_PHYS_ADDR
  perf script: Support physical address
  perf mem: Support physical address
  perf sort: Add sort option for physical address
  perf tools: Support new sample type for physical address
  perf vendor events powerpc: Remove duplicate events
  perf intel-pt: Fix syntax in documentation of config option
  perf test powerpc: Fix 'Object code reading' test
  perf trace: Support syscall name globbing
  perf syscalltbl: Support glob matching on syscall names
  perf report: Calculate the average cycles of iterations

Pull irq fixes from Ingo Molnar:
 "A sparse irq race/locking fix, and a MSI irq domains population fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make sparse_irq_lock protect what it should protect
  genirq/msi: Fix populating multiple interrupts

Once we encounter I/O interruption during issuing discards, we will delay
long time before next round, but if system status is I/O idle during the
time, it may loses opportunity to issue discards. So this patch changes
to hurry up to issue discard after io interruption.

Besides, this patch also fixes to issue discards accurately with assigned
rate.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Fix below incorrect display when reading discard_granularity sysfs node.

$ cat /sys/fs/f2fs/<device>/discard_granularity
$ 16
$ echo 32 > /sys/fs/f2fs/<device>/discard_granularity
$ cat /sys/fs/f2fs/<device>/discard_granularity
$ 16
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Add a bugon in f2fs_evict_inode to detect inconsistent status between
inode cache and related node page cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Commit b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up origin")
verifies that the origin lower inode stored in the overlayfs inode matched
the inode of a copy up origin dentry found by lookup.

There is a false positive result in that check when lower fs does not
support file handles and copy up origin cannot be followed by file handle
at lookup time.

The false negative happens when finding an overlay inode in cache on a
copied up overlay dentry lookup. The overlay inode still 'remembers' the
copy up origin inode, but the copy up origin dentry is not available for
verification.

Relax the check in case copy up origin dentry is not available.

Fixes: b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up...")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The refreshed argument isn't used by any caller, get rid of it.

Use a helper for just updating the inode (no need to fill in a kstat).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If the IOCB_DSYNC flag is set a sync is not being performed by
fuse_file_write_iter.

Honor IOCB_DSYNC/IOCB_SYNC by setting O_DYSNC/O_SYNC respectively in the
flags filed of the write request.

We don't need to sync data or metadata, since fuse_perform_write() does
write-through and the filesystem is responsible for updating file times.

Original patch by Vitaly Zolotusky.
Reported-by: Nate Clark <nate@neworld.us>
Cc: Vitaly Zolotusky <vitaly@unitc.com>.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Commit 0b6e9ea0 ("fuse: Add support for pid namespaces") broke
Sandstorm.io development tools, which have been sending FUSE file
descriptors across PID namespace boundaries since early 2014.

The above patch added a check that prevented I/O on the fuse device file
descriptor if the pid namespace of the reader/writer was different from the
pid namespace of the mounter.  With this change passing the device file
descriptor to a different pid namespace simply doesn't work.  The check was
added because pids are transferred to/from the fuse userspace server in the
namespace registered at mount time.

To fix this regression, remove the checks and do the following:

1) the pid in the request header (the pid of the task that initiated the
filesystem operation) is translated to the reader's pid namespace.  If a
mapping doesn't exist for this pid, then a zero pid is used.  Note: even if
a mapping would exist between the initiator task's pid namespace and the
reader's pid namespace the pid will be zero if either mapping from
initator's to mounter's namespace or mapping from mounter's to reader's
namespace doesn't exist.

2) The lk.pid value in setlk/setlkw requests and getlk reply is left alone.
Userspace should not interpret this value anyway.  Also allow the
setlk/setlkw operations if the pid of the task cannot be represented in the
mounter's namespace (pid being zero in that case).
Reported-by: Kenton Varda <kenton@sandstorm.io>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b6e9ea0 ("fuse: Add support for pid namespaces")
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>

Pull ARM updates from Russell King:
 "Low priority fixes and updates for ARM:

   - add some missing includes

   - efficiency improvements in system call entry code when tracing is
     enabled

   - ensure ARMv6+ is always built as EABI

   - export save_stack_trace_tsk()

   - fix fatal signal handling during mm fault

   - build translation table base address register from scratch

   - appropriately align the .data section to a word boundary where we
     rely on that data being word aligned"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8691/1: Export save_stack_trace_tsk()
  ARM: 8692/1: mm: abort uaccess retries upon fatal signal
  ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
  ARM: align .data section
  ARM: always enable AEABI for ARMv6+
  ARM: avoid saving and restoring registers unnecessarily
  ARM: move PC value into r9
  ARM: obtain thread info structure later
  ARM: use aliases for registers in entry-common
  ARM: 8689/1: scu: add missing errno include
  ARM: 8688/1: pm: add missing types include