- 09 Jan, 2012 1 commit
-
-
Karsten Wiese authored
They are not needed here. Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: stable@kernel.org Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 08 Jan, 2012 8 commits
-
-
Adrian Knoth authored
The serial number is used multiple times in hdspm.c. Since it belongs to the card, let's store it in struct hdspm and refer to it whenever necessary. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
-
Xi Wang authored
A malicious USB device may feed in carefully crafted min/max/res values, so that the inner loop in parse_uac2_sample_rate_range() could run for a long time or even never terminate, e.g., given max = INT_MAX. Also nr_rates could be a large integer, which causes an integer overflow in the subsequent call to kmalloc() in parse_audio_format_rates_v2(). Thus, kmalloc() would allocate a smaller buffer than expected, leading to a memory corruption. To exploit the two vulnerabilities, an attacker needs physical access to the machine to plug in a malicious USB device. This patch makes two changes. 1) The type of "rate" is changed to unsigned int, so that the loop could stop once "rate" is larger than INT_MAX. 2) Limit nr_rates to 1024. Suggested-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Raymond Yau authored
Fix channels swapping of 4 channels playback by using vortex_adbdma_stopfifo instead of vortex_adbdma_pausefifo for SNDRV_PCM_TRIGGER_STOP event Signed-off-by:
Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by:
-
Raymond Yau authored
Fix IRQ fifo error when playing stereo by set stereo flag of fifo control. This also fix the swap of front and rear channels on au8830. Signed-off-by:
-
Raymond Yau authored
- Fix XtalkGainsDefault, XtalkGains1Chn - Fix XtalkWideCoefsLeftEQ, XtalkWideCoefsRightEQ - Fix XtlakWideCoefsLeftXT, XtalkWideCoefsRightXT Signed-off-by:
-
Raymond Yau authored
Signed-off-by:
-
Pavel Hofman authored
Append the external clock item to the clock list only if the SPDIF_IN capability is defined in the SPDIF register. Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by:
-
Pavel Hofman authored
Cards with identical PCI ids but no AC97 config in EEPROM do not have the ac97 field initialized. We must check for this case to avoid kernel oops. Signed-off-by:
-
- 31 Dec, 2011 2 commits
-
-
Tim Yamin authored
0x20051102 is an Audigy 2 ZS. Signed-off-by:
Tim Yamin <plasm@roo.me.uk> Signed-off-by:
-
Vinod Koul authored
Export compress_offload.h and compress_params.h for userland to use Signed-off-by:
Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
-
- 23 Dec, 2011 6 commits
-
-
Vinod Koul authored
Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Vinod Koul authored
This patch adds core.c, the file which implements the ioctls and registers the devices Signed-off-by:
-
Vinod Koul authored
This patch adds the header files for ioctl definitions and header file for driver APIs for lower level device drivers to use Signed-off-by:
-
Vinod Koul authored
The patch adds the various definations used to define the encoder and decoder parameters Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Omair Mohammed Abdullah authored
Use the minor numbers 2 and 3 for audio compressed offload devices. Also add support for these devices in core Signed-off-by:
Omair Mohammed Abdullah <omair.m.abdullah@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
The patch adds the documentation file explaining the API Signed-off-by:
-
- 22 Dec, 2011 22 commits
-
-
Eliot Blennerhassett authored
Sharing and not reinitialising static pcm_hardware struct resulted in stream format validity flags being incorrectly shared between cards. Fix and clarify by declaring locally and initialising in the open functions. Signed-off-by:
Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by:
-
Eliot Blennerhassett authored
Since introduction of mono and low latency modes, fixed channel count of 2 is not always valid. Use reported max_channels instead. Signed-off-by:
-
Eliot Blennerhassett authored
Previously, only payload and size were correct, sufficient for reading, but other fields produced spurious debug output. Signed-off-by:
-
Eliot Blennerhassett authored
It is useful to know the HPI version without having to load the module, in order to determine the matching firmware version. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Add new error codes, and adapter properties. Clean up some comments. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
dsp_code struct is not created if firmware is invalid, so check and zero of firmware pointer is not necessary Signed-off-by:
-
Eliot Blennerhassett authored
Structs hpi_adapter and snd_card_asihpi had members that duplicate those in underlying hpi_adapter_obj or whose info can be retrieved using hpi_adapter_get_info(). Print less info in probe function, it can be retrieved from /proc. Avoid name redundancy: hpi_adapter_obj.adapter_type renamed to .type Signed-off-by:
-
Eliot Blennerhassett authored
Enables retrieving more debug info in fewer transactions. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Structs related to network flash update are not required in kernel. Signed-off-by:
-
Eliot Blennerhassett authored
Add "Internal" node type. Remove GPI and GPO node types. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
The channel count can be queried to determine which. Signed-off-by:
-
Eliot Blennerhassett authored
Unlike other streams which support 1..max channels, Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
and update HPI version to 4.10 Signed-off-by:
-
Eliot Blennerhassett authored
Elapsed counter should only count data committed to snd_pcm_period_elapsed, rather than all data available Signed-off-by:
-
- 19 Dec, 2011 1 commit
-
-
Takashi Iwai authored
These drviers defined only variables but didn't declare as module parameters. Also fix the enable variable to bool type. Signed-off-by:
-
