- 08 Feb, 2016 40 commits
-
-
Caesar Wang authored
this pacthset try to fix the code style for sunxi. Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
nvmem providers have restrictions on register strides, so return error when users attempt to read/write buffers with sizes which are less than word size. Without this patch the userspace would continue to try as it does not get any error from the nvmem core, resulting in a hang or endless loop in userspace. Reported-by:
Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by:
-
Andrew-CT Chen authored
Add Mediatek EFUSE driver to access hardware data like thermal sensor calibration or HDMI impedance. Signed-off-by:
Andrew-CT Chen <andrew-ct.chen@mediatek.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Andrew-CT Chen authored
Add Mediatek MT8173 EFUSE Devicetree binding file Signed-off-by:
-
Ariel D'Alessandro authored
This commit adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). EEPROM will be kept in Power Down mode except during read/write calls. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Ariel D'Alessandro authored
Add the devicetree binding document for NXP LPC18xx EEPROM memory. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Geliang Tang <geliangtang@163.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
-
Geliang Tang authored
Use to_i2c_client() instead of open-coding it. Signed-off-by:
-
Ben Hutchings authored
Commit 985087db 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087db ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/misc/Kconfig:config ARM_CHARLCD drivers/misc/Kconfig: bool "ARM Ltd. Character LCD Driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and this driver did not have a ".remove" function coded for non-modular drivers either. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Paul Burton authored
Allow the pch_phub driver to be build on MIPS platforms, in preparation for its use on the MIPS Boston board. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Sudip Mukherjee authored
The pr_debug() will never be executed. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Matthias Lange authored
Signed-off-by:
Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by:
-
Sudip Mukherjee authored
Instead of calling release_firmware() on every error and then jumping lets have a common release_firmware() in the error path. This patch also fixes a memory leak where we missed release_firmware() if mic_x100_load_command_line() fails. Signed-off-by:
Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by:
-
Sudip Mukherjee authored
Instead of jumping to a label and then returning from there lets return directly. Signed-off-by:
-
Sudip Mukherjee authored
If request_firmware() succeeds then rc becomes 0. After that if the test for strcmp() fails then we were jumping to label done: and returning rc. But rc being 0 we returned success whereas we have failed here and we were supposed to return an error. Signed-off-by:
-
Sudip Mukherjee authored
>From the error path we are printing an error message with dev_err(). No need to print almost same message with dev_dbg(). Signed-off-by:
-
Dan Carpenter authored
After the loop we test "if (!retry)" to see if we timedout. The problem is "retry--" is a post-op so retry will be -1 at the end of the loop. I have fixed this by changing it to a pre-op instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ashutosh Dixit authored
This patch fixes the following crash seen when MIC reset is invoked in RESET_FAILED state due to device_del being called a second time on an already deleted device: [<ffffffff813b2295>] device_del+0x45/0x1d0 [<ffffffff813b243e>] device_unregister+0x1e/0x60 [<ffffffffa040f1c2>] scif_unregister_device+0x12/0x20 [scif_bus] [<ffffffffa042f75a>] cosm_stop+0xaa/0xe0 [mic_cosm] [<ffffffffa042f844>] cosm_reset_trigger_work+0x14/0x20 [mic_cosm] The fix consists in realizing that because cosm_reset changes the state to MIC_RESETTING, cosm_stop needs the previous state, before it changed to MIC_RESETTING, to decide whether a hw_ops->stop had previously been issued. This is now provided in a new cosm_device member cdev->prev_state. Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Alexander Shishkin authored
This adds Intel(R) Trace Hub PCI ID for Broxton SOC. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
This adds Intel(R) Trace Hub PCI ID for Apollo Lake SOC. Signed-off-by:
-
Alexander Shishkin authored
Currently, the character device write method allocates a temporary buffer for user's data, but the user's data size is not sanitized and can cause arbitrarily large allocations via kzalloc() or an integer overflow that will then result in overwriting kernel memory. This patch trims the input buffer size to avoid these issues. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Chunyan Zhang authored
Since both sw_start and sw_end are master indices, the size of array that holds them is sw_end - sw_start + 1, which the current code gets wrong, allocating one item less than required. This patch corrects the allocation size, avoiding potential slab corruption. Signed-off-by:
Chunyan Zhang <zhang.chunyan@linaro.org> [alexander.shishkin@linux.intel.com: re-wrote the commit message] Signed-off-by:
-
Alexander Shishkin authored
Currently, the list of stm_sources linked to an stm device is protected by a spinlock, which also means that sources' .unlink() method is called under this spinlock. However, this method may (and does) sleep, which means trouble. This patch slightly reworks locking around stm::link_list so that bits that might_sleep() are called with a mutex held instead. Modification of this list requires both mutex and spinlock to be held, while looking at the list can be done under either mutex or spinlock. Signed-off-by:
-
Alexander Shishkin authored
Right now, if stm device removal has to unbind from a policy (that is, an stm device that has STP policy, gets removed), it will trigger a nested lock on the stm device's policy mutex. This patch fixes the problem by moving the locking from the policy unbinding to policy removal (configfs path), where it's actually needed; the other caller of the policy unbinding function already takes the mutex around the call. Signed-off-by:
-
Arnd Bergmann authored
The newly added STM code uses SRCU, but does not ensure that this code is part of the kernel: drivers/built-in.o: In function `stm_source_link_show': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `stm_source_link_drop': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' This adds a Kconfig 'select' statement like all the other SRCU using drivers have. Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_free_coherent" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined! ERROR: "dma_supported" [drivers/hwtracing/intel_th/intel_th.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
If STM=n, it doesn't make sense to ask about STM_DUMMY and STM_SOURCE_CONSOLE support, which are not even built when enabled anyway. Hence hide these options if STM=n. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mathieu Poirier authored
Other than plainly parsing the device tree there is no way to know which CPU a tracer is affined to. As such adding an interface to lookup the CPU field enclosed in the etm_drvdata structure that was initialised at boot time. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Mathieu Poirier authored
The coresight drivers have absolutely no control over bind and unbind operations triggered from sysfs. The operations simply can't be cancelled or denied event when one or several tracing sessions are under way. Since the memory associated to individual device is invariably freed, the end result is a kernel crash when the path from source to sink is travelled again as demonstrated here[1]. One solution could be to keep track of all the path (i.e tracing session) that get created and iterate through the elements of those path looking for the coresight device that is being removed. This proposition doesn't scale well since there is no upper bound on the amount of concurrent trace session that can be created. With the above in mind, this patch prevent devices from being unbounded from their driver by using the driver->suppress_bind_attr option. That way trace sessions can be managed without fearing to loose devices. Since device can't be removed anymore the xyz_remove() functions found in each driver is also removed. [1]. http://www.spinics.net/lists/arm-kernel/msg474952.htmlReported-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
-
Mathieu Poirier authored
In function 'coresight_unregister()', all references to the csdev that is being taken away need to be removed from the topology. Otherwise building the next coresight path from source to sink may use memory that has been released. Signed-off-by:
-
Mathieu Poirier authored
The reference count taken by function bus_find_device() needs to be released if a child device is found, something this patch is adding. Reported-by:
-
Mathieu Poirier authored
In its current form the code never frees csdev->refcnt allocated in coresight_register(). There is also a problem with csdev->conns that is freed before device_unregister() rather than in the device release function. This patch addresses both issues by moving kfree(csdev->conns) to coresight_device_release() and freeing csdev->refcnt, also in the same function. Reported-by:
-
Mathieu Poirier authored
On some platform the following lockdep error occurs when doing simple manipulations: [ 23.197021] [ 23.198608] ====================================================== [ 23.205078] [ INFO: possible circular locking dependency detected ] [ 23.211639] 4.4.0-rc8-00025-gbbf360b #172 Not tainted [ 23.216918] ------------------------------------------------------- [ 23.223480] sh/858 is trying to acquire lock: [ 23.228057] (coresight_mutex){+.+.+.}, at: [<c0415d40>] coresight_enable+0x1c/0x1b4 [ 23.236206] [ 23.236206] but task is already holding lock: [ 23.242309] (s_active#52){++++.+}, at: [<c01d4b40>] kernfs_fop_write+0x5c/0x1c0 [ 23.250122] [ 23.250122] which lock already depends on the new lock. [ 23.250122] [ 23.258697] [ 23.258697] the existing dependency chain (in reverse order) is: [ 23.266510] -> #1 (s_active#52){++++.+}: [ 23.270843] [<c01d30ec>] __kernfs_remove+0x294/0x35c [ 23.276672] [<c01d3e44>] kernfs_remove_by_name_ns+0x44/0x8c [ 23.283172] [<c01d6318>] remove_files+0x3c/0x84 [ 23.288543] [<c01d66b4>] sysfs_remove_group+0x48/0x9c [ 23.294494] [<c01d6734>] sysfs_remove_groups+0x2c/0x3c [ 23.300506] [<c030b658>] device_remove_attrs+0x5c/0x74 [ 23.306549] [<c030c290>] device_del+0x110/0x218 [ 23.311950] [<c030c3c4>] device_unregister+0x2c/0x6c [ 23.317779] [<c04156d8>] coresight_unregister+0x30/0x40 [ 23.323883] [<c041a290>] etm_probe+0x228/0x2e8 [ 23.329193] [<c02bc760>] amba_probe+0xe4/0x160 [ 23.334503] [<c0310540>] driver_probe_device+0x23c/0x480 [ 23.340728] [<c0310820>] __driver_attach+0x9c/0xa0 [ 23.346374] [<c030e400>] bus_for_each_dev+0x70/0xa4 [ 23.352142] [<c030fcf4>] driver_attach+0x24/0x28 [ 23.357604] [<c030f86c>] bus_add_driver+0x1e0/0x278 [ 23.363372] [<c0310d48>] driver_register+0x80/0x100 [ 23.369110] [<c02bc508>] amba_driver_register+0x58/0x5c [ 23.375244] [<c0749514>] etm_driver_init+0x18/0x1c [ 23.380889] [<c0009918>] do_one_initcall+0xc4/0x20c [ 23.386657] [<c0715e7c>] kernel_init_freeable+0x160/0x208 [ 23.392974] [<c052d7fc>] kernel_init+0x18/0xf0 [ 23.398254] [<c0010850>] ret_from_fork+0x14/0x24 [ 23.403747] -> #0 (coresight_mutex){+.+.+.}: [ 23.408447] [<c008ed60>] lock_acquire+0xe4/0x210 [ 23.413909] [<c0530a30>] mutex_lock_nested+0x74/0x450 [ 23.419860] [<c0415d40>] coresight_enable+0x1c/0x1b4 [ 23.425689] [<c0416030>] enable_source_store+0x58/0x68 [ 23.431732] [<c030b358>] dev_attr_store+0x20/0x2c [ 23.437286] [<c01d55e8>] sysfs_kf_write+0x50/0x54 [ 23.442871] [<c01d4ba8>] kernfs_fop_write+0xc4/0x1c0 [ 23.448699] [<c015b60c>] __vfs_write+0x34/0xe4 [ 23.454040] [<c015bf38>] vfs_write+0x98/0x174 [ 23.459228] [<c015c7a8>] SyS_write+0x4c/0xa8 [ 23.464355] [<c00107c0>] ret_fast_syscall+0x0/0x1c [ 23.470031] [ 23.470031] other info that might help us debug this: [ 23.470031] [ 23.478393] Possible unsafe locking scenario: [ 23.478393] [ 23.484619] CPU0 CPU1 [ 23.489349] ---- ---- [ 23.494079] lock(s_active#52); [ 23.497497] lock(coresight_mutex); [ 23.503906] lock(s_active#52); [ 23.509918] lock(coresight_mutex); [ 23.513702] [ 23.513702] *** DEADLOCK *** [ 23.513702] [ 23.519897] 3 locks held by sh/858: [ 23.523529] #0: (sb_writers#7){.+.+.+}, at: [<c015ec38>] __sb_start_write+0xa8/0xd4 [ 23.531799] #1: (&of->mutex){+.+...}, at: [<c01d4b38>] kernfs_fop_write+0x54/0x1c0 [ 23.539916] #2: (s_active#52){++++.+}, at: [<c01d4b40>] kernfs_fop_write+0x5c/0x1c0 [ 23.548156] [ 23.548156] stack backtrace: [ 23.552734] CPU: 0 PID: 858 Comm: sh Not tainted 4.4.0-rc8-00025-gbbf360b #172 [ 23.560302] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 23.566589] Backtrace: [ 23.569152] [<c00154d4>] (dump_backtrace) from [<c00156d0>] (show_stack+0x18/0x1c) [ 23.577087] r7:ed4b8570 r6:c0936400 r5:c07ae71c r4:00000000 [ 23.583038] [<c00156b8>] (show_stack) from [<c027e69c>] (dump_stack+0x98/0xc0) [ 23.590606] [<c027e604>] (dump_stack) from [<c008a750>] (print_circular_bug+0x21c/0x33c) [ 23.599090] r5:c0939d60 r4:c0936400 [ 23.602874] [<c008a534>] (print_circular_bug) from [<c008e370>] (__lock_acquire+0x1c98/0x1d88) [ 23.611877] r10:00000003 r9:c0fd7a5c r8:ed4b8550 r7:ed4b8570 r6:ed4b8000 r5:c0ff69e4 [ 23.620117] r4:c0936400 r3:ed4b8550 [ 23.623901] [<c008c6d8>] (__lock_acquire) from [<c008ed60>] (lock_acquire+0xe4/0x210) [ 23.632080] r10:00000000 r9:00000000 r8:60000013 r7:c07cb7b4 r6:00000001 r5:00000000 [ 23.640350] r4:00000000 [ 23.643005] [<c008ec7c>] (lock_acquire) from [<c0530a30>] (mutex_lock_nested+0x74/0x450) [ 23.651458] r10:ecc0bf80 r9:edbe7dcc r8:ed4b8000 r7:c0fd7a5c r6:c0415d40 r5:00000000 [ 23.659729] r4:c07cb780 [ 23.662384] [<c05309bc>] (mutex_lock_nested) from [<c0415d40>] (coresight_enable+0x1c/0x1b4) [ 23.671234] r10:ecc0bf80 r9:edbe7dcc r8:ed733c00 r7:00000000 r6:ed733c00 r5:00000002 [ 23.679473] r4:ed762140 [ 23.682128] [<c0415d24>] (coresight_enable) from [<c0416030>] (enable_source_store+0x58/0x68) [ 23.691070] r7:00000000 r6:ed733c00 r5:00000002 r4:ed762160 [ 23.697052] [<c0415fd8>] (enable_source_store) from [<c030b358>] (dev_attr_store+0x20/0x2c) [ 23.705780] r5:edbe7dc0 r4:c0415fd8 [ 23.709533] [<c030b338>] (dev_attr_store) from [<c01d55e8>] (sysfs_kf_write+0x50/0x54) [ 23.717834] r5:edbe7dc0 r4:c030b338 [ 23.721618] [<c01d5598>] (sysfs_kf_write) from [<c01d4ba8>] (kernfs_fop_write+0xc4/0x1c0) [ 23.730163] r7:00000000 r6:00000000 r5:00000002 r4:edbe7dc0 [ 23.736145] [<c01d4ae4>] (kernfs_fop_write) from [<c015b60c>] (__vfs_write+0x34/0xe4) [ 23.744323] r10:00000000 r9:ecc0a000 r8:c0010964 r7:ecc0bf80 r6:00000002 r5:c01d4ae4 [ 23.752593] r4:ee385a40 [ 23.755249] [<c015b5d8>] (__vfs_write) from [<c015bf38>] (vfs_write+0x98/0x174) [ 23.762908] r9:ecc0a000 r8:c0010964 r7:ecc0bf80 r6:000ab0d8 r5:00000002 r4:ee385a40 [ 23.771057] [<c015bea0>] (vfs_write) from [<c015c7a8>] (SyS_write+0x4c/0xa8) [ 23.778442] r8:c0010964 r7:00000002 r6:000ab0d8 r5:ee385a40 r4:ee385a40 [ 23.785522] [<c015c75c>] (SyS_write) from [<c00107c0>] (ret_fast_syscall+0x0/0x1c) [ 23.793457] r7:00000004 r6:00000001 r5:000ab0d8 r4:00000002 [ 23.799652] coresight-etb10 54162000.etb: ETB enabled [ 23.805084] coresight-funnel 54164000.funnel: FUNNEL inport 0 enabled [ 23.811859] coresight-replicator 44000000.ocp:replicator: REPLICATOR enabled [ 23.819335] coresight-funnel 54158000.funnel: FUNNEL inport 0 enabled [ 23.826110] coresight-etm3x 5414c000.ptm: ETM tracing enabled The locking in coresight_unregister() is not required as the only customers of the function are drivers themselves when an initialisation failure has been encoutered. Reported-by: -
Mathieu Poirier authored
Signed-off-by:
-
Jorgen Hansen authored
This change restricts the reading and setting of the head and tail pointers on 32bit X86 to 32bit for both correctness and performance reasons. On uniprocessor X86_32, the atomic64_read may be implemented as a non-locked cmpxchg8b. This may result in updates to the pointers done by the VMCI device being overwritten. On MP systems, there is no such correctness issue, but using 32bit atomics avoids the overhead of the locked 64bit operation. All this is safe because the queue size on 32bit systems will never exceed a 32bit value. Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
K. Y. Srinivasan authored
On the channel send side, many of the VMBUS device drivers explicity serialize access to the outgoing ring buffer. Give more control to the VMBUS device drivers in terms how to serialize accesss to the outgoing ring buffer. The default behavior will be to aquire the ring lock to preserve the current behavior. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
The function hv_ringbuffer_read() is called always on a pre-assigned CPU. Each chnnel is bound to a specific CPU and this function is always called on the CPU the channel is bound. There is no need to acquire the spin lock; get rid of this overhead. Signed-off-by:
-
