- 28 Feb, 2024 2 commits
-
-
Heiko Stuebner authored
The video-codec@fdea0400 was missing the interrupt-names property that is part of the binding. Add it. Fixes: 944be6fb ("arm64: dts: rockchip: Add VPU support for RK3568/RK3566") Cc: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Acked-by:
Uwe Kleine-König <ukleinek@debian.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240227173526.710056-1-heiko@sntech.de
-
Heiko Stuebner authored
The VO*-general-register-files need a clock, so add the correct one. Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
- 27 Feb, 2024 11 commits
-
-
Elon Zhang authored
Add devicetree binding for Toybrick TB-RK3588X board from Rockchip Toybrick. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Weizhao Ouyang <weizhao.ouyang@arm.com> Signed-off-by:
Elon Zhang <zhangzj@rock-chips.com> Link: https://lore.kernel.org/r/20240221022902.751528-2-zhangzj@rock-chips.comSigned-off-by:
-
Elon Zhang authored
Add board file for Rockchip Toybrick TB-RK3588X board. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB Memory LPDDR4x Mali G610MC4 GPU 2× MIPI-CSI0 Connector 1x 2Lanes PCIe3.0 Connector 1x SATA3.0 Connector 32GB eMMC Module 2x USB 2.0, 2x USB 3.0 1x HDMI Output, 1x HDMI Input 2x Ethernet Port Functions work normally: [1] USB2.0 Host [2] Ethernet0 with PHY RTL8211F More information can be obtained from the following websites: [1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html [2] http://t.rock-chips.com/Reviewed-by:
-
Tim Lunn authored
Adjust compatible string to match the board vendor of Xunlong Signed-off-by:
Tim Lunn <tim@feathertop.org> Reviewed-by:
Dragan Simic <dsimic@manjaro.org> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240214040731.3069111-5-tim@feathertop.orgSigned-off-by:
-
Tim Lunn authored
Adjust compatible string to match the board vendor of Sinovoip Signed-off-by:
-
Tim Lunn authored
The vendor for this board was incorrectly listed as Rockchip. Fix this now while they are not used anywhere, in the future they may be used by bootloader to select dts. Update the vendor to Sinovoip. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Tim Lunn authored
The vendor for this board was incorrectly listed as Rockchip. Fix this now while they are not used anywhere, in the future they may be used by bootloader to select dts. Update the vendor to Xunlong. Signed-off-by:
-
Cristian Ciocaltea authored
Add DT nodes for HDMI0 PHY and related syscon found on RK3588 SoC. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240219204626.284399-1-cristian.ciocaltea@collabora.comSigned-off-by:
-
Heiko Stuebner authored
-
Sebastian Reichel authored
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed for HDMI support. Acked-by:
-
Sebastian Reichel authored
CLK_NR_CLKS should not be part of the binding. Let's drop it, since the kernel code no longer uses it either. Reviewed-by:
-
Sebastian Reichel authored
CLK_NR_CLKS is not part of the DT bindings and needs to be removed from it, just like it recently happened for other platforms. This takes care of it by introducing a new function identifying the maximum used clock ID at runtime. Signed-off-by:
-
- 13 Feb, 2024 10 commits
-
-
Chris Morgan authored
Add the proper nodes to activate the USB 3.0 ports on the Indiedroid Nova. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240125201943.90476-3-macroalpha82@gmail.comSigned-off-by:
-
Trevor Woerner authored
The rock-pi-e currently comes in 4 board spins, the latest one (v1.21) swaps out the Realtek 8211e PHY for an 8211f PHY. Therefore modify the phy-handle name to be more generic. Signed-off-by:
Trevor Woerner <twoerner@gmail.com> Link: https://lore.kernel.org/r/20240116204103.29318-1-twoerner@gmail.comSigned-off-by:
-
Johan Jonker authored
Fix rk3399 hdmi ports node so that it matches the rockchip,dw-hdmi.yaml binding. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.comSigned-off-by:
-
Johan Jonker authored
Fix rk3328 hdmi ports node so that it matches the rockchip,dw-hdmi.yaml binding. Signed-off-by:
-
Kever Yang authored
The sdmmc node already have a "&sdmmc_det" for pinctrl which switch the GPIO0A4 to sdmmc detect function, no need to define a separate "cd-gpios". RK3588 has force_jtage feature which is enable JTAG function via sdmmc pins automatically when there is no SD card insert, this feature will need the GPIO0A4 works in sdmmc_det function like other mmc signal instead of GPIO function, or else the force_jtag can not auto be disabled when SD card insert. Signed-off-by:
Kever Yang <kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20240201034621.1970279-1-kever.yang@rock-chips.comSigned-off-by:
-
Farouk Bouabid authored
A hardware switch can set the rs485 transceiver into half or full duplex mode. Switching to the half-duplex mode requires the user to enable em485 on uart5 using ioctl, DE/RE are both connected to GPIO0_B5 which is the RTS signal for uart0. Implement GPIO0_B5 as rts-gpios with RTS_ON_SEND option enabled (default) so that driver mode gets enabled while sending (RTS high) and receiver mode gets enabled while not sending (RTS low). In full-duplex mode (em485 is disabled), DE is connected to GPIO0_B5 and RE is grounded (enabled). Since GPIO0_B5 is implemented as rts-gpios, the driver mode gets enabled whenever we want to send something and RE is not affected (always enabled) in this case by the state of RTS. Signed-off-by:
Farouk Bouabid <farouk.bouabid@theobroma-systems.com> Link: https://lore.kernel.org/r/20240208-dev-rx-enable-v6-2-39e68e17a339@theobroma-systems.comSigned-off-by:
-
Farouk Bouabid authored
A hardware switch can set the rs485 transceiver into half or full duplex mode. Switching to the half-duplex mode requires the user to enable em485 on uart5 using ioctl, DE/RE are both connected to GPIO2_C3 which is the RTS signal for uart0. Implement GPIO2_C3 as rts-gpios with RTS_ON_SEND option enabled (default) so that driver mode gets enabled while sending (RTS high) and receiver mode gets enabled while not sending (RTS low). In full-duplex mode (em485 is disabled), DE is connected to GPIO2_C3 and RE is grounded (enabled). Since GPIO2_C3 is implemented as rts-gpios, the driver mode gets enabled whenever we want to send something and RE is not affected (always enabled) in this case by the state of RTS. Signed-off-by:
-
Chris Morgan authored
Add support for the Powkiddy RGB10MAX3. The Powkiddy RGB10MAX3 is a handheld gaming device with a 720p 5.0 inch screen powered by the Rockchip RK3566 SoC. It includes a Realtek 8723ds WiFi/BT module, 2 ADC joysticks powered by a 4-way muxed ADC channel, and several GPIO face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), 3 pwm controlled LEDs, and the device includes 1GB of RAM. Signed-off-by:
-
Chris Morgan authored
The Powkiddy RGB10MAX3 is a handheld gaming device made by Powkiddy and powered by the Rockchip RK3566 SoC. Signed-off-by:
-
Chris Morgan authored
Move the vdd_cpu regulator to the device specific dts. This is in preparation of adding the Powkiddy RGB10MAX3 device, which uses a different vendor for the CPU regulator at a different i2c address. Also add a phandle to the bluetooth device so that we can change the compatible string for the RGB10MAX3. This device uses the same pinouts but a different bluetooth device. Signed-off-by:
-
- 04 Feb, 2024 3 commits
-
-
Manuel Traut authored
This includes support for both the v0.1 units that were sent to developers and the v2.0 units from production. v1.0 is not included as no units are known to exist. Working/Tested: - SDMMC - UART - Buttons - Charging/Battery/PMIC - Audio - USB - Display - SPI NOR Flash Signed-off-by:
Alexander Warnecke <awarnecke002@hotmail.com> Signed-off-by:
Manuel Traut <manut@mecka.net> Tested-By:
Diederik de Haas <didi.debian@cknow.org> Reviewed-by:
Ondrej Jirman <megi@xff.cz> Tested-by:
-
Manuel Traut authored
Add devicvetree binding documentation for Pine64 PineTab2 which uses the Rockchip RK3566 SoC. Signed-off-by:
-
Chris Morgan authored
Add the Goodix GT927 touchscreen to the Anbernic RG-ARC D. Signed-off-by:
Trooper_Max <troopermax@gmail.com> Link: https://lore.kernel.org/r/20240201150620.886786-1-macroalpha82@gmail.com [renamed node to generic touchscreen@14] Signed-off-by:
-
- 25 Jan, 2024 14 commits
-
-
John Clark authored
sdmmc on the nanopc-t6 is powered by vcc3v3_sd_s0, not vcc_3v3_s3 add the vcc3v3_sd_s0 regulator, and control it with gpio4_a5 Signed-off-by:
John Clark <inindev@gmail.com> Link: https://lore.kernel.org/r/20240102024054.1030313-1-inindev@gmail.comSigned-off-by:
-
Quentin Schulz authored
An earlier commit defined an alias for all SPI controllers found on the RK3399, so there's no need to duplicate the aliases in helios64's device tree. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240109-rk3399-spi-aliases-v1-2-2009e44e734a@theobroma-systems.comSigned-off-by:
-
Quentin Schulz authored
There are 6 SPI controllers on RK3399 and they are all numbered in the TRM, so let's add the appropriate aliases to the main DTSI so that any RK3399-based board doesn't need to define the aliases themselves to benefit from stable SPI indices in userspace. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Muhammed Efe Cetin authored
NanoPi R6C is mostly same as R6S variant. It has M2 port instead of a NIC port and different led labeling. Signed-off-by:
Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/0f9ee0baa6c9de4d54dd6d13957ca15a63ec934f.1703934548.git.efectn@protonmail.comSigned-off-by:
-
Muhammed Efe Cetin authored
Add basic NanoPi R6S support that comes with USB2, PCIe, SD card, eMMC support. Signed-off-by:
-
Muhammed Efe Cetin authored
Add support for NanoPi R6 series boards that based on RK3588S. NanoPi R6S basically has: - USB3 - USB2 - eMMC - 2x 2.5GBe & 1x 1GBe ethernet - HDMI - SD card support Unlike R6S variant, NanoPi R6C has PCIe M.2 M-key instead of 1x 2.5GBe. Signed-off-by:
-
Stefan Nagy authored
The ROCK Pi 4A/B/C boards come with a 32 Mbit SPI NOR flash chip (XTX Technology Limited XT25F32) with a maximum clock frequency of 108 MHz. Use this value for the device node's spi-max-frequency property. This patch has been tested on ROCK Pi 4A. Signed-off-by:
Stefan Nagy <stefan.nagy@ixypsilon.net> Reviewed-by:
-
John Clark authored
The nanopc-t6 has an sdmmc card detect connected to gpio0_a4 which is active low. Signed-off-by:
-
Dragan Simic authored
Add missing cache information to the Rockchip RK3399 SoC dtsi. The specified values were derived by hand from the cache size specifications available from the RK3399 datasheet; for future reference, here's a brief summary: - Each Cortex-A72 core has 48 KB of L1 instruction cache and 32 KB of L1 data cache available, four-way set associative - Each Cortex-A53 core core has 32 KB of instruction cache and 32 KB of L1 data cache available, four-way set associative - The big (A72) cluster has 1 MB of unified L2 cache available - The little (A53) cluster has 512 KB of unified L2 cache available This patch allows /proc/cpuinfo and lscpu(1) to display proper RK3399 cache information, and it eliminates the following error in the kernel log: cacheinfo: Unable to detect cache hierarchy for CPU 0 While there, add a couple of somewhat useful comments, which may help a bit anyone going through the RK3399 SoC dtsi. Co-developed-by:Kyle Copperfield <kmcopper@danwin1210.me> Signed-off-by:
-
Alexey Charkov authored
By default the GPIO pin that connects to the WiFi enable signal inside the M.2 Key E slot is driven low, resulting in impossibility to connect to any network. Add a DT node to expose it as an RFKILL device, which lets the WiFi driver or userspace toggle it as required. Signed-off-by:
Alexey Charkov <alchark@gmail.com> Link: https://lore.kernel.org/r/20240106202650.22310-1-alchark@gmail.comSigned-off-by:
-
Hugh Cole-Baker authored
The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE modem. This slot has no PCIe functionality, only USB 2.0 pins are wired to the SoC, and USIM pins are wired to a SIM card slot on the board. Define the 3.3v supply for the slot so it can be used. Signed-off-by:
Hugh Cole-Baker <sigmaris@gmail.com> Link: https://lore.kernel.org/r/20240109202729.54292-1-sigmaris@gmail.comSigned-off-by:
-
Jagan Teki authored
Edgeble NCM6A, NCM6B SoM has Green LED on the module. Enable them with heartbeat function. Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20231125190522.87607-11-jagan@edgeble.aiSigned-off-by:
-
Jagan Teki authored
Edgeble NCM6A-IO board has 2 port USB2.0 Host and USB2.0 on E-Key. Add support for it. Signed-off-by:
-
Jagan Teki authored
Edgeble NCM6A-IO board has M.2 B-Key, E-Key via PCI3x2. Add support for it. Signed-off-by:
-
