- 19 Oct, 2017 8 commits
-
-
Geert Uytterhoeven authored
The in-driver channel configuration in sh_cmt_info.channels_mask is now always set for all CMT devices instantiated from DT. Hence the "renesas,channels-mask" property is no longer checked, and its handling can be removed, cfr. commit 4e18111f ("devicetree: bindings: Remove deprecated properties"). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org>
-
Geert Uytterhoeven authored
Document in the driver that "renesas,cmt-48-gen2" is deprecated, but still supported for backward compatibility with old DTBs, cfr. commit 4e18111f ("devicetree: bindings: Remove deprecated properties"). Signed-off-by:
-
Geert Uytterhoeven authored
Remove driver matching support for the unused "renesas,cmt-32" and "renesas,cmt-32-fast" compatible values, cfr. commit 203bb347 ("devicetree: bindings: Remove unused 32-bit CMT bindings"). As this removes the last user of SH_CMT_32BIT_FAST, all support for this variant is removed from the driver. Signed-off-by:
-
Magnus Damm authored
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support for the old DT binding is still kept around, however devices using such binding will be treated as a low-feature CMT0 device. If users want to make use of CMT1-specific features then they need to update their DTBs. No special CMT1-specific features are however implemented by his patch, only DT bindings are redone as groundwork for future feature patches. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Acked-by:
-
Magnus Damm authored
Always use 0x3f as channel mask for the SH_CMT_48BIT type of devices. Once this patch is applied the "renesas,channels-mask" property will be ignored by the driver for older devices matching SH_CMT_48BIT. In the future when all CMT types store channel mask in the driver then we will be able to deprecate and remove "renesas,channels-mask" from DTS. Signed-off-by:
-
Geert Uytterhoeven authored
While the new family-specific compatible values introduced by commit 6f54cc1a ("devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings") use the recommended order "<vendor>,<family>-<device>", the new SoC-specific compatible values still use the old and deprecated order "<vendor>,<device>-<soc>". Switch the SoC-specific compatible values to the recommended order while there are no upstream users of these compatible values yet. Fixes: 7f03a0ec ("devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings") Fixes: 63d9e8ca ("devicetree: bindings: Deprecate property, update example") Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Adds a pointer back to link structure. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org Link: https://lkml.kernel.org/r/20171016215658.GA101965@beast
-
James Hogan authored
When CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=n, the call path hrtimer_reprogram -> clockevents_program_event -> clockevents_program_min_delta will not retry if the clock event driver returns -ETIME. If the driver could not satisfy the program_min_delta for any reason, the lack of a retry means the CPU may not receive a tick interrupt, potentially until the counter does a full period. This leads to rcu_sched timeout messages as the stalled CPU is detected by other CPUs, and other issues if the CPU is holding locks or other resources at the point at which it stalls. There have been a couple of observed mechanisms through which a clock event driver could not satisfy the requested min_delta and return -ETIME. With the MIPS GIC driver, the shared execution resource within MT cores means inconventient latency due to execution of instructions from other hardware threads in the core, within gic_next_event, can result in an event being set in the past. Additionally under virtualisation it is possible to get unexpected latency during a clockevent device's set_next_event() callback which can make it return -ETIME even for a delta based on min_delta_ns. It isn't appropriate to use MIN_ADJUST in the virtualisation case as occasional hypervisor induced high latency will cause min_delta_ns to quickly increase to the maximum. Instead, borrow the retry pattern from the MIN_ADJUST case, but without making adjustments. Retry up to 10 times, each time increasing the attempted delta by min_delta, before giving up. [ Matt: Reworked the loop and made retry increase the delta. ] Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Signed-off-by:
-
- 18 Oct, 2017 3 commits
-
-
Thomas Gleixner authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: -
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. (The prior workqueue patch missed a few timers.) Signed-off-by:
-
Zhenzhong Duan authored
If the base clock is behind jiffies in the soft irq expiry code then the next timer is retrieved by get_next_timer_interrupt() to avoid incrementing base clock one by one. If the next timer interrupt is past current jiffies then the base clock is set to jiffies - 1. At the call site this is incremented and another iteration through the expiry loop is executed which checks empty hash buckets. That's a pointless excercise because it's already known that the next timer is past jiffies. Set the base clock in that case to jiffies directly so it gets incremented to jiffies + 1 at the call site resulting in immediate termination of the expiry loop. [ tglx: Massaged changelog and added comment to the code ] Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Joe Jin <joe.jin@oracle.com> Cc: sboyd@codeaurora.org Cc: Srinivas Reddy Eeda <srinivas.eeda@oracle.com> Cc: john.stultz@linaro.org Link: https://lkml.kernel.org/r/7086a857-f90c-4616-bbe8-f7696f21626c@default
-
- 17 Oct, 2017 4 commits
-
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by:
-
Kees Cook authored
Several timer users needlessly reset their .function/.data fields during their timer callback, but nothing else changes them. Some users do not use their .data field at all. Each instance is removed here. Signed-off-by:
-
Arnd Bergmann authored
do_settimeofday() is a wrapper around do_settimeofday64(), so that function can be called directly. The wrapper can be removed once the last user is gone. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
This is a follow-up to commit 5c499410 ("posix-timers: Use get_timespec64() and put_timespec64()"), which left two system call using copy_from_user()/copy_to_user(). Change them as well for consistency. Signed-off-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: y2038@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Link: https://lkml.kernel.org/r/20171013183009.3442318-1-arnd@arndb.de
-
- 05 Oct, 2017 15 commits
-
-
Kees Cook authored
Two errors found their way into the timer callback conversions that weren't noticed with x86 allmodconfig. Reported-by:
kernel test robot <lkp@01.org> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch workqueue to use from_timer() and pass the timer pointer explicitly. Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch kthread to use from_timer() and pass the timer pointer explicitly. Signed-off-by:
-
Kees Cook authored
The expires field is normally initialized during the first mod_timer() call. It was unused by all callers, so remove it from the macro. Signed-off-by:
-
Kees Cook authored
Drop the arguments from the macro and adjust all callers with the following script: perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \ $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h) Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts Acked-by:
-
Kees Cook authored
The expire and data arguments of DEFINE_TIMER are only used in two places and are ignored by the code (malta-display.c only uses mod_timer(), never add_timer(), so the preset expires value is ignored). Set both sets of arguments to zero. Signed-off-by:
-
Kees Cook authored
This removes the now unused TIMER_*INITIALIZER macros: TIMER_INITIALIZER TIMER_PINNED_INITIALIZER TIMER_DEFERRED_INITIALIZER TIMER_PINNED_DEFERRED_INITIALIZER Signed-off-by:
-
Kees Cook authored
Drops the last user of TIMER_INITIALIZER and adapts timer.h to use the internal version. Signed-off-by:
-
Kees Cook authored
This removes uses of TIMER_DEFERRED_INITIALIZER and chooses a location to call timer_setup() from before add_timer() or mod_timer() is called. Adjusts callbacks to use from_timer() as needed. Signed-off-by:
-
Kees Cook authored
This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by:
-
Kees Cook authored
This refactors the only users of init_timer_pinned() to use the new timer_setup() and from_timer(). Drops the definition of init_timer_pinned(). Signed-off-by:
-
Kees Cook authored
Remove uses of init_timer_on_stack() with open-coded function and data assignments that could be expressed using timer_setup_on_stack(). Several were removed from the stack entirely since there was a one-to-one mapping of parent structure to timer, those are switched to using timer_setup() instead. All related callbacks were adjusted to use from_timer(). Signed-off-by:
-
Kees Cook authored
This refactors the only user of init_timer_pinned_deferrable() to use the new timer_setup() and from_timer(). Adds a pointer back to the policy, and drops the definition of init_timer_pinned_deferrable(). Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new from_timer() helper and passing the timer pointer explicitly. Since this special timer is on the stack, it needs to have a wrapper structure to carry state once .data is eliminated. Signed-off-by:
-
Thomas Gleixner authored
Pick up upstream changes to get the prerequisites for the timer changes.
-
- 03 Oct, 2017 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixlet from Tejun Heo: "Minor documentation update" * 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: Documentation: core-api: minor workqueue.rst cleanups
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "The recent migration code updates assumed that migrations always execute from the top to the bottom once and didn't clean up internal states after each migration round; however, cgroup_transfer_tasks() repeats the inner steps multiple times and the garbage internal states from the previous iteration led to OOPS. Waiman fixed the bug by reinitializing the relevant states at the end of each migration round" * 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Reinit cgroup_taskset structure before cgroup_migrate_execute() returns
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fixes from Tejun Heo: "Rather important fixes this time. - The new percpu area allocator had a subtle bug in how it iterates the memory regions and could skip viable areas, which led to allocation failures for module static percpu variables. Dennis fixed the bug and another non-critical one in stat calculation. - Mark noticed that the generic implementations of percpu local atomic reads aren't properly protected against irqs and there's a (slim) chance for split reads on some 32bit systems. Generic implementations are updated to disable irq when read size is larger than ulong size. This may have made some 32bit archs which can do atomic local 64bit accesses generate sub-optimal code. We need to find them out and implement arch-specific overrides" * 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix iteration to prevent skipping over block percpu: fix starting offset for chunk statistics traversal percpu: make this_cpu_generic_read() atomic w.r.t. interrupts -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Nothing too interesting. Arnd's gcc-7 warning fixes that slipped through the cracks for two release cycles (my bad), and two minor low level driver updates" * 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: don't ignore result code of ahci_reset_controller() ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs ata: avoid gcc-7 warning in ata_timing_quantize
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB fixes for 4.14-rc4 to resolved reported issues. There's a bunch of stuff in here based on the great work Andrey Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when dealing with corrupted USB descriptors that we've never seen in "normal" operation, but is now ensuring the stack is much more hardened overall. There's also the usual XHCI and gadget driver fixes as well, and a build error fix, and a few other minor things, full details in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (38 commits) usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform usb: gadget: udc: atmel: set vbus irqflags explicitly usb: gadget: ffs: handle I/O completion in-order usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe() usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value usb: gadget: udc: renesas_usb3: fix for no-data control transfer USB: dummy-hcd: Fix erroneous synchronization change USB: dummy-hcd: fix infinite-loop resubmission bug USB: dummy-hcd: fix connection failures (wrong speed) USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse USB: devio: Don't corrupt user memory USB: devio: Prevent integer overflow in proc_do_submiturb() USB: g_mass_storage: Fix deadlock when driver is unbound USB: gadgetfs: Fix crash caused by inadequate synchronization USB: gadgetfs: fix copy_to_user while holding spinlock USB: uas: fix bug in handling of alternate settings usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives usb-storage: fix bogus hardware error messages for ATA pass-thru devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a small number (5) of patches for some reported TTY and serial issues. Nothing major, a documentation update, timing fix, error handling fix, name reporting fix, and a timeout issue resolved. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sccnxp: Fix error handling in sccnxp_probe() tty: serial: lpuart: avoid report NULL interrupt serial: bcm63xx: fix timing issue. mxser: fix timeout calculation for low rates serial: sh-sci: document R8A77970 bindings
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Greg KH: "Here are some small staging/IIO driver fixes for 4.14-rc4 Most of these have been in my tree for a while due to travels, sorry for the delay. They resolve a number of small issues reported by people, mostly for the iio drivers. Nothing major in here, full details are in the shortlog. All have been linux-next for a few weeks with no reported issues" * tag 'staging-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack. iio: core: Return error for failed read_reg iio: ad7793: Fix the serial interface reset iio: ad_sigma_delta: Implement a dedicated reset function IIO: BME280: Updates to Humidity readings need ctrl_reg write! iio: adc: mcp320x: Fix readout of negative voltages iio: adc: mcp320x: Fix oops on module unload iio: adc: stm32: fix bad error check on max_channels iio: trigger: stm32-timer: fix a corner case to write preset iio: trigger: stm32-timer: preset shouldn't be buffered iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()' iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()' iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()' staging: rtl8723bs: avoid null pointer dereference on pmlmepriv staging: rtl8723bs: add missing range check on id staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist staging: speakup: fix speakup-r empty line lockup staging: pi433: Move limit check to switch default to kill warning staging: r8822be: fix null pointer dereferences with a null driver_adapter staging: mt29f_spinand: Enable the read ECC before program the page ...
-
Linus Torvalds authored
Merge tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are a few small fixes for 4.14-rc4. The removal of DRIVER_ATTR() was almost completed by 4.14-rc1, but one straggler made it in through some other tree (odds are, one of mine...) So there's a simple removal of the last user, and then finally the macro is removed from the tree. There's a fix for old crazy udev instances that insist on reloading a module when it is removed from the kernel due to the new uevents for bind/unbind. This fixes the reported regression, hopefully some year in the future we can drop the workaround, once users update to the latest version, but I'm not holding my breath. And then there's a build fix for a linker warning, and a buffer overflow fix to match the PCI fixes you took through the PCI tree in the same area. All of these have been in linux-next for a few weeks while I've been traveling, sorry for the delay" * tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: remove DRIVER_ATTR fpga: altera-cvp: remove DRIVER_ATTR() usage driver core: platform: Don't read past the end of "driver_override" buffer base: arch_topology: fix section mismatch build warnings driver core: suppress sending MODALIAS in UNBIND uevents
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are a handful of char/misc driver fixes for 4.14-rc4. Nothing major, some binder fixups, hyperv fixes, and other tiny things. All of these have been sitting in my tree for way too long, sorry for the delay in getting them to you. All have been in linux-next for a few weeks, and despite some people's feeling about if linux-next actually tests things, I think it's a good "soak test" for patches" * tag 'char-misc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: fcopy: restore correct transfer length vmbus: don't acquire the mutex in vmbus_hvsock_device_unregister() intel_th: pci: Add Lewisburg PCH support intel_th: pci: Add Cedar Fork PCH support stm class: Fix a use-after-free nvmem: add missing of_node_put() in of_nvmem_cell_get() nvmem: core: return EFBIG on out-of-range write auxdisplay: charlcd: properly restore atomic counter on error path binder: fix memory corruption in binder_transaction binder binder: fix an ret value override android: binder: fix type mismatch warning
-
- 02 Oct, 2017 1 commit
-
-
Ard Biesheuvel authored
ahci_pci_reset_controller() calls ahci_reset_controller(), which may fail, but ignores the result code and always returns success. This may result in failures like below ahci 0000:02:00.0: version 3.0 ahci 0000:02:00.0: enabling device (0000 -> 0003) ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled ahci 0000:02:00.0: controller reset failed (0xffffffff) ahci 0000:02:00.0: failed to stop engine (-5) ... repeated many times ... ahci 0000:02:00.0: failed to stop engine (-5) Unable to handle kernel paging request at virtual address ffff0000093f9018 ... PC is at ahci_stop_engine+0x5c/0xd8 [libahci] LR is at ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci] ... [<ffff000000a17014>] ahci_stop_engine+0x5c/0xd8 [libahci] [<ffff000000a196b4>] ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci] [<ffff000000a197d8>] ahci_init_controller+0x80/0x168 [libahci] [<ffff000000a260f8>] ahci_pci_init_controller+0x60/0x68 [ahci] [<ffff000000a26f94>] ahci_init_one+0x75c/0xd88 [ahci] [<ffff000008430324>] local_pci_probe+0x3c/0xb8 [<ffff000008431728>] pci_device_probe+0x138/0x170 [<ffff000008585e54>] driver_probe_device+0x2dc/0x458 [<ffff0000085860e4>] __driver_attach+0x114/0x118 [<ffff000008583ca8>] bus_for_each_dev+0x60/0xa0 [<ffff000008585638>] driver_attach+0x20/0x28 [<ffff0000085850b0>] bus_add_driver+0x1f0/0x2a8 [<ffff000008586ae0>] driver_register+0x60/0xf8 [<ffff00000842f9b4>] __pci_register_driver+0x3c/0x48 [<ffff000000a3001c>] ahci_pci_driver_init+0x1c/0x1000 [ahci] [<ffff000008083918>] do_one_initcall+0x38/0x120 where an obvious hardware level failure results in an unnecessary 15 second delay and a subsequent crash. So record the result code of ahci_reset_controller() and relay it, rather than ignoring it. Signed-off-by:Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
