- 12 Apr, 2022 8 commits
-
-
Johnson Lin authored
Separated DIG RX gain, IGI configurations from not supportted HW using "support_igi" capability flag. Signed-off-by:
Johnson Lin <johnson.lin@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408001353.17188-9-pkshih@realtek.com
-
Chia-Yuan Li authored
Disable watchdog timer to prevent it timeout suddenly. Signed-off-by:
Chia-Yuan Li <leo.li@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
BA CAM is used to react receiving AMPDU packets, so reset them to be expected initial state. Signed-off-by:
-
Ping-Ke Shih authored
The bit B_AX_SS_NONEMPTY_SS2FINFO_EN should be clear, because we configure C-MAC as hardware TX/RX mode. Signed-off-by:
-
Ping-Ke Shih authored
Turn on ERR IMR, and then firmware can capture interrupts reflecting errors to recover hardware states. Signed-off-by:
-
Chia-Yuan Li authored
Similarly, create functions to set specific C-MAC masks for firmware recovery. Signed-off-by:
-
Chia-Yuan Li authored
These interrupts are used by firmware to recover hardware. Create functions to set specific D-MAC masks to replace plain register settings. Signed-off-by:
-
Zong-Zhe Yang authored
add `break` to fix warning of unannotated fall-through between switch labels. Fixes: 14f9f479 ("rtw89: ser: control hci interrupts on/off by state") Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
- 11 Apr, 2022 6 commits
-
-
Sriram R authored
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by:Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Peter Seiderer authored
Using an ath9k card the debugfs output of minstrel_ht looks like the following (note the zero values for the first four rates sum-of success/attempts): best ____________rate__________ ____statistics___ _____last____ ______sum-of________ mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts] OFDM 1 DP 6.0M 272 1640 5.2 3.1 53.8 3 0 0 0 0 OFDM 1 C 9.0M 273 1104 7.7 4.6 53.8 4 0 0 0 0 OFDM 1 B 12.0M 274 836 10.0 6.0 53.8 4 0 0 0 0 OFDM 1 A S 18.0M 275 568 14.3 8.5 53.8 5 0 0 0 0 OFDM 1 S 24.0M 276 436 18.1 0.0 0.0 5 0 1 80 1778 OFDM 1 36.0M 277 300 24.9 0.0 0.0 0 0 1 0 107 OFDM 1 S 48.0M 278 236 30.4 0.0 0.0 0 0 0 0 75 OFDM 1 54.0M 279 212 33.0 0.0 0.0 0 0 0 0 72 Total packet count:: ideal 16582 lookaround 885 Average # of aggregated frames per A-MPDU: 1.0 Debugging showed that the rate statistics for the first four rates where stored in the MINSTREL_CCK_GROUP instead of the MINSTREL_OFDM_GROUP because in minstrel_ht_get_stats() the supported check was not honoured as done in various other places, e.g net/mac80211/rc80211_minstrel_ht_debugfs.c: 74 if (!(mi->supported[i] & BIT(j))) 75 continue; With the patch applied the output looks good: best ____________rate__________ ____statistics___ _____last____ ______sum-of________ mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts] OFDM 1 D 6.0M 272 1640 5.2 5.2 100.0 3 0 0 1 1 OFDM 1 C 9.0M 273 1104 7.7 7.7 100.0 4 0 0 38 38 OFDM 1 B 12.0M 274 836 10.0 9.9 89.5 4 2 2 372 395 OFDM 1 A P 18.0M 275 568 14.3 14.3 97.2 5 52 53 6956 7181 OFDM 1 S 24.0M 276 436 18.1 0.0 0.0 0 0 1 6 163 OFDM 1 36.0M 277 300 24.9 0.0 0.0 0 0 1 0 35 OFDM 1 S 48.0M 278 236 30.4 0.0 0.0 0 0 0 0 38 OFDM 1 S 54.0M 279 212 33.0 0.0 0.0 0 0 0 0 38 Total packet count:: ideal 7097 lookaround 287 Average # of aggregated frames per A-MPDU: 1.0 Signed-off-by:Peter Seiderer <ps.report@gmx.net> Link: https://lore.kernel.org/r/20220404165414.1036-1-ps.report@gmx.netSigned-off-by:
-
Johannes Berg authored
There's no real reason not to send the SSID to userspace when it requests information about P2P_GO, it is, in that respect, exactly the same as AP interfaces. Fix that. Fixes: 44905265 ("nl80211: don't expose wdev->ssid for most interfaces") Signed-off-by:
-
Lorenzo Bianconi authored
Add ieee80211_rx_check_bss_color_collision routine in order to introduce BSS color collision detection in mac80211 if it is not supported in HW/FW (e.g. for mt7915 chipset). Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify BSS color collision detection is supported in HW/FW. Set this for ath11k which apparently didn't need this code. Tested-by:
Peter Chiu <Chui-Hao.Chiu@mediatek.com> Co-developed-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org [clarify commit message a bit, move flag to mac80211] Signed-off-by:
-
Toke Høiland-Jørgensen authored
The comment above the ieee80211_tx_info_clear_status() helper was somewhat confusing as to which fields it was or wasn't clearing. So replace it by something that is hopefully more, well, clear. Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220404210108.2684907-1-toke@toke.dkSigned-off-by:
-
Lorenzo Bianconi authored
Even if it is not a real issue since ieee80211_set_after_csa_beacon() or ieee80211_set_after_color_change_beacon() are run only when csa or bcc is active, move next_beacon check before running ieee80211_assign_beacon routine. Signed-off-by:
-
- 06 Apr, 2022 26 commits
-
-
Meng Tang authored
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Signed-off-by:
-
Christophe Leroy authored
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Haowen Bai authored
crypt and crypt->ops could be null, so we need to checking null before dereference Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Signed-off-by:
-
Haowen Bai authored
fix warning reported by smatch: drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table() warn: assigning (-2) to unsigned variable '*(lna_gain[0])' Signed-off-by:
-
Haowen Bai authored
fix warning reported by smatch: drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure() warn: assigning (-772) to unsigned variable 'fval' Signed-off-by:
-
Chris Chiu authored
RTL8188CUS/RTL8192CU(gen1) don't support rate adaptive report hence no real txrate info can be retrieved. The vendor driver reports the highest rate in HT capabilities from the IEs to avoid empty txrate. This commit initiates the txrate information with the highest supported rate negotiated with AP. The gen2 chip keeps update the txrate from the rate adaptive reports, and gen1 chips at least have non-NULL txrate after associated. Signed-off-by:
Chris Chiu <chris.chiu@canonical.com> Signed-off-by:
-
Chris Chiu authored
Fill up the available TX/RX antenna so the iw commands can show correct antenna information for different chips. Signed-off-by:
-
Jakob Koschel authored
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Acked-by:
-
Ulf Hansson authored
Keeping the power to the SDIO card during system wide suspend, consumes energy. Especially on battery driven embedded systems, this can be a problem. Therefore, let's change the behaviour into allowing the SDIO card to be powered off, unless WOWL is supported and enabled. Note that, the downside from this change, is that during system resume the SDIO card needs to be re-initialized and the FW must be re-programmed. Even if this may take some time to complete, it should we worth it, rather than draining the battery. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by:
Yann Gautier <yann.gautier@foss.st.com> Signed-off-by:
-
Niels Dossche authored
cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx) is held during the function's execution. mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not hold that lock, therefore violating the assertion. Add a lock around the call. Disclaimer: I am currently working on a static analyser to detect missing locks. This was a reported case. I manually verified the report by looking at the code, so that I do not send wrong information or patches. After concluding that this seems to be a true positive, I created this patch. However, as I do not in fact have this particular hardware, I was unable to test it. Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Signed-off-by:
-
Po Hao Huang authored
Without this patch, hw scan won't stay long enough on DFS/passive channels. Found previous logic error and fix it. Signed-off-by:
Po Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
Turn off coexistence driver control, let firmware can control the traffic during scan. This prevents potential unexpected behavior of the BT driver. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Po Hao Huang authored
Add a dummy function for packet offload to eliminate warning message "c2h class 1 func 2 not support". This c2h is for debug purpose and its presence itself can do the work, so further parsing won't be required for now. Signed-off-by:
-
Po Hao Huang authored
Previously we only consider single interface's status, idle mode behavior could be unexpected when multiple interfaces is active. Change to enter/leave idle mode by mac80211's configuration state. Signed-off-by:
-
Ping-Ke Shih authored
ptcl_init, standing for protocol initialization, is updated to the latest version. Signed-off-by:
-
Ping-Ke Shih authored
TMAC is short for TX MAC, and this patch is to configure FIFO thresholds. Signed-off-by:
-
Ping-Ke Shih authored
Configure NAV function and its parameters. Signed-off-by:
-
Ping-Ke Shih authored
Update IC specific settings accordingly. Signed-off-by:
-
Ping-Ke Shih authored
The security setting of 8852A and 8852C are different, so change the settings accordingly. Signed-off-by:
-
Ping-Ke Shih authored
CMAC is Control MAC, and this patch is to turn on CR (control registers) protection. Signed-off-by:
-
Ping-Ke Shih authored
The v1 chip use specific functions to enable and disable BB/RF. Signed-off-by:
-
Ping-Ke Shih authored
The v1 chip has additional setting of STA scheduler, so add it. Signed-off-by:
-
Ping-Ke Shih authored
DMAC is short for data MAC. 8852C has more settings than 8852A, so add them. Signed-off-by:
-
Ping-Ke Shih authored
Configure L1 settings of enter and exit. Signed-off-by:
-
Ping-Ke Shih authored
Add setting to support 8852ce. Signed-off-by:
-
Ping-Ke Shih authored
Address info registers are used to configure size of DMA address info to point skb->data. With different size, it can support different number of scatters. Signed-off-by:
-
