References to psock must be done inside RCU critical section.

Fixes: 174a79ff ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The addition of map_flags BPF_SOCKMAP_STRPARSER flags was to handle a
specific use case where we want to have BPF parse program disabled on
an entry in a sockmap.

However, Alexei found the API a bit cumbersome and I agreed. Lets
remove the STRPARSER flag and support the use case by allowing socks
to be in multiple maps. This allows users to create two maps one with
programs attached and one without. When socks are added to maps they
now inherit any programs attached to the map. This is a nice
generalization and IMO improves the API.

The API rules are less ambiguous and do not need a flag:

  - When a sock is added to a sockmap we have two cases,

     i. The sock map does not have any attached programs so
        we can add sock to map without inheriting bpf programs.
        The sock may exist in 0 or more other maps.

    ii. The sock map has an attached BPF program. To avoid duplicate
        bpf programs we only add the sock entry if it does not have
        an existing strparser/verdict attached, returning -EBUSY if
        a program is already attached. Otherwise attach the program
        and inherit strparser/verdict programs from the sock map.

This allows for socks to be in a multiple maps for redirects and
inherit a BPF program from a single map.

Also this patch simplifies the logic around BPF_{EXIST|NOEXIST|ANY}
flags. In the original patch I tried to be extra clever and only
update map entries when necessary. Now I've decided the complexity
is not worth it. If users constantly update an entry with the same
sock for no reason (i.e. update an entry without actually changing
any parameters on map or sock) we still do an alloc/release. Using
this and allowing multiple entries of a sock to exist in a map the
logic becomes much simpler.

Note: Now that multiple maps are supported the "maps" pointer called
when a socket is closed becomes a list of maps to remove the sock from.
To keep the map up to date when a sock is added to the sockmap we must
add the map/elem in the list. Likewise when it is removed we must
remove it from the list. This results in searching the per psock list
on delete operation. On TCP_CLOSE events we walk the list and remove
the psock from all map/entry locations. I don't see any perf
implications in this because at most I have a psock in two maps. If
a psock were to be in many maps its possibly this might be noticeable
on delete but I can't think of a reason to dup a psock in many maps.
The sk_callback_lock is used to protect read/writes to the list. This
was convenient because in all locations we were taking the lock
anyways just after working on the list. Also the lock is per sock so
in normal cases we shouldn't see any contention.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 174a79ff ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.

However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.

   BPF_SK_SKB_STREAM_PARSER
   BPF_SK_SKB_STREAM_VERDICT

This has the advantage of having a readable name and can easily be
extended in the future.

Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch solves the following error:
arch/arm/boot/dts/rk3228-evb.dtb: ERROR (phandle_references): Reference to non-existent node or label "phy0"

Fixess db40f15b ("ARM: dts: rk3228-evb: Enable the integrated PHY for gmac")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MVPP22_XLG_CTRL1_FRAMESIZELIMIT define is used as an offset, but is
defined as BIT(0). Updated its name to contains "OFFS" as in offset and
fix its value using the offset value, 0.
Reported-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Fixes: 76eb1b1d ("net: mvpp2: set maximum packet size for 10G ports")
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-08-25

This series contains updates to i40e and i40evf only.

Mitch adjusts the max packet size to account for two VLAN tags.

Sudheer provides a fix to ensure that the watchdog timer is scheduled
immediately after admin queue operations are scheduled in i40evf_down().
Fixes an issue by adding locking around the admin queue command and
update of state variables so that adminq_subtask will have the accurate
information whenever it gets scheduled.

Anjali fixes a bug where the PF flag setup should happen before the VMDq
RSS queue count is initialized for VMDq VSI to get the right number of
queues for RSS in the case of x722 devices.  Fixed a problem with the
hardware ATR eviction feature where the NVM setting was incorrect.

Jake separates the flags into two types, hw_features and flags.  The
hw_features flags contain a set of features which are enabled at init
time and will not contain feature flags that can be toggled.  Everything
else will remain in the flags variable, and can be modified anytime
during run time.  We should not be directly copying a cpumask_t, since
it is bitmap and might not be copied correctly, so use cpumask_copy()
instead.

Stefan Assmann makes vf _offload_flags more "generic" by renaming it to
vf_cap_flags, which allows other capabilities besides offloading to be
added.

Alan makes it such that if adaptive-rx/tx is enabled, the user cannot
make any manual adjustments to interrupt moderation.  Also makes it so
that if ITR is disabled by adaptive-rx/tx is then enabled, ITR will be
re-enabled.

v2: Dropped patches #1 & #8 from the original patch series submission,
    while Jesse and Jake re-work their patches based on feedback from
    David Miller.  Also removed the duplicate patch 3 that was
    accidentally sent out twice in the previous submission.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: SR-IOV ndos support

This set adds basic SR-IOV including setting/getting VF MAC addresses,
VLANs, link state and spoofcheck settings.  It is wired up for both
vNICs and representors (note: ip link will not report VF settings on
VF/PF representors because they are not linked to the PF PCI device).

Pablo and team add the basic implementation, Simon and Dirk follow
up with the representor plumbing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add basic ndo_set/get_vf to support SR-IOV on all types
of port representors.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add basic ndo_set/get_vf to support SR-IOV.

VF to egress phy static mapping by now.

Use vfcfg ABI version 2 to write the info to the FW and collect
the return value from the mailbox.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Jimmy Kizito <jimmy.kizito@netronome.com>
Signed-off-by: Rami Tomer <rami.tomer@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syszkaller got a hang in tcp stack, related to a bug in
tcp_sendpage_locked()

root@syzkaller:~# cat /proc/3059/stack
[<ffffffff83de926c>] __lock_sock+0x1dc/0x2f0
[<ffffffff83de9473>] lock_sock_nested+0xf3/0x110
[<ffffffff8408ce01>] tcp_sendmsg+0x21/0x50
[<ffffffff84163b6f>] inet_sendmsg+0x11f/0x5e0
[<ffffffff83dd8eea>] sock_sendmsg+0xca/0x110
[<ffffffff83dd9547>] kernel_sendmsg+0x47/0x60
[<ffffffff83de35dc>] sock_no_sendpage+0x1cc/0x280
[<ffffffff8408916b>] tcp_sendpage_locked+0x10b/0x160
[<ffffffff84089203>] tcp_sendpage+0x43/0x60
[<ffffffff841641da>] inet_sendpage+0x1aa/0x660
[<ffffffff83dd4fcd>] kernel_sendpage+0x8d/0xe0
[<ffffffff83dd50ac>] sock_sendpage+0x8c/0xc0
[<ffffffff81b63300>] pipe_to_sendpage+0x290/0x3b0
[<ffffffff81b67243>] __splice_from_pipe+0x343/0x750
[<ffffffff81b6a459>] splice_from_pipe+0x1e9/0x330
[<ffffffff81b6a5e0>] generic_splice_sendpage+0x40/0x50
[<ffffffff81b6b1d7>] SyS_splice+0x7b7/0x1610
[<ffffffff84d77a01>] entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: 306b13eb ("proto_ops: Add locked held versions of sendmsg and sendpage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cong Wang says:

====================
net_sched: clean up tc classes and u32 filter

Patch 1 and patch 2 prepare for patch 3. Major changes
are in patch 3 and patch 4, details are there too.

v2: Add patch 1 and 2, group all into a patchset
    Fix a coding style issue in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It is ugly to hide a u32-filter-specific pointer inside Qdisc,
this breaks the TC layers:

1. Qdisc is a generic representation, should not have any specific
   data of any type

2. Qdisc layer is above filter layer, should only save filters in
   the list of struct tcf_proto.

This pointer is used as the head of the chain of u32 hash tables,
that is struct tc_u_hnode, because u32 filter is very special,
it allows to create multiple hash tables within one qdisc and
across multiple u32 filters.

Instead of using this ugly pointer, we can just save it in a global
hash table key'ed by (dev ifindex, qdisc handle), therefore we can
still treat it as a per qdisc basis data structure conceptually.

Of course, because of network namespaces, this key is not unique
at all, but it is fine as we already have a pointer to Qdisc in
struct tc_u_common, we can just compare the pointers when collision.

And this only affects slow paths, has no impact to fast path,
thanks to the pointer ->tp_c.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For TC classes, their ->get() and ->put() are always paired, and the
reference counting is completely useless, because:

1) For class modification and dumping paths, we already hold RTNL lock,
   so all of these ->get(),->change(),->put() are atomic.

2) For filter bindiing/unbinding, we use other reference counter than
   this one, and they should have RTNL lock too.

3) For ->qlen_notify(), it is special because it is called on ->enqueue()
   path, but we already hold qdisc tree lock there, and we hold this
   tree lock when graft or delete the class too, so it should not be gone
   or changed until we release the tree lock.

Therefore, this patch removes ->get() and ->put(), but:

1) Adds a new ->find() to find the pointer to a class by classid, no
   refcnt.

2) Move the original class destroy upon the last refcnt into ->delete(),
   right after releasing tree lock. This is fine because the class is
   already removed from hash when holding the lock.

For those who also use ->put() as ->unbind(), just rename them to reflect
this change.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like for TC actions, ->delete() is a special case,
we have to prepare and fill the notification before delete
otherwise would get use-after-free after we remove the
reference count.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is not needed if we move them up properly.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb_pad() function frees the skb on error, so this code has a double
free.

Fixes: 00e57a6d ("net-next/hinic: Add Tx operation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Lebrun says:

====================
net: updates for IPv6 Segment Routing

v2: seg6_lwt_headroom() is not relevant for lwtunnel_input_redirect()
    use cases, and L2ENCAP only uses this redirection. Fix incoherence
    between arbitrary MAC header size support and fixed headroom
    computation by setting only LWTUNNEL_STATE_INPUT_REDIRECT for L2ENCAP
    mode.

This patch series provides several updates for the SRv6 implementation. The
first patch leverages the existing infrastructure to support encapsulation
of IPv4 packets. The second patch implements the T.Encaps.L2 SR function,
enabling to encapsulate an L2 Ethernet frame within an IPv6+SRH packet.
The last three patches update the seg6local lightweight tunnel, and mainly
implement four new actions: End.T, End.DX2, End.DX4 and End.DT6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements the following seg6local actions.

- SEG6_LOCAL_ACTION_END_T: regular SRH processing and forward to the
  next-hop looked up in the specified routing table.

- SEG6_LOCAL_ACTION_END_DX2: decapsulate an L2 frame and forward it to
  the specified network interface.

- SEG6_LOCAL_ACTION_END_DX4: decapsulate an IPv4 packet and forward it,
  possibly to the specified next-hop.

- SEG6_LOCAL_ACTION_END_DT6: decapsulate an IPv6 packet and forward it
  to the next-hop looked up in the specified routing table.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds three helper functions to be used with the seg6local packet
processing actions.

The decap_and_validate() function will be used by the End.D* actions, that
decapsulate an SR-enabled packet.

The advance_nextseg() function applies the fundamental operations to update
an SRH for the next segment.

The lookup_nexthop() function helps select the next-hop for the processed
SR packets. It supports an optional next-hop address to route the packet
specifically through it, and an optional routing table to use.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensures that the seg6local lightweight tunnel is used solely
with IPv6 routes and processes only IPv6 packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements the L2 frame encapsulation mechanism, referred to
as T.Encaps.L2 in the SRv6 specifications [1].

A new type of SRv6 tunnel mode is added (SEG6_IPTUN_MODE_L2ENCAP). It only
accepts packets with an existing MAC header (i.e., it will not work for
locally generated packets). The resulting packet looks like IPv6 -> SRH ->
Ethernet -> original L3 payload. The next header field of the SRH is set to
NEXTHDR_NONE.

[1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the SRv6 encapsulation mode to carry an IPv4 payload.
All the infrastructure was already present, I just had to add a parameter
to seg6_do_srh_encap() to specify the inner packet protocol, and perform
some additional checks.

Usage example:
ip route add 1.2.3.4 encap seg6 mode encap segs fc00::1,fc00::2 dev eth0
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

During NVM update, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated. This causes
incorrect input to i40e_nvmupd_check_wait_event and state transitions
don't happen.

This issue existed before but surfaced after commit 373149fc
("i40e: Decrease the scope of rtnl lock")

This fix adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently the driver allows the user to change (or even disable)
interrupt moderation if adaptive-rx/tx is enabled when this should
not be the case.

Adaptive RX/TX will not respect the user's ITR settings so
allowing the user to change it is weird.  This bug would also
allow the user to disable interrupt moderation with adaptive-rx/tx
enabled which doesn't make much sense either.

This patch makes it such that if adaptive-rx/tx is enabled, the user
cannot make any manual adjustments to interrupt moderation.  It also
makes it so that if ITR is disabled but adaptive-rx/tx is then
enabled, ITR will be re-enabled.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

According to the header file cpumask.h, we shouldn't be directly copying
a cpumask_t, since its a bitmap and might not be copied correctly. Lets
use the provided cpumask_copy() function instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

If we're going to bother initializing a variable to reference it we might
as well use it.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The current name of vf_offload_flags indicates that the bitmap is
limited to offload related features. Make this more generic by renaming
it to vf_cap_flags, which allows for other capabilities besides
offloading to be added.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In i40e_vsi_add_vlan we treat attempting to add VID=0 as an error,
because it does not do what the caller might expect. We already special
case VID=0 in i40e_vlan_rx_add_vid so that we avoid this error when
adding the VLAN.

This special casing is necessary so that we do not add the VLAN=0 filter
since we don't want to stop receiving untagged traffic. Unfortunately,
not all callers of i40e_vsi_add_vlan are aware of this, including when
we add VLANs from a VF device.

Rather than special casing every single caller of i40e_vsi_add_vlan,
lets just move this check internally. This makes the code simpler
because the caller does not need to be aware of how VLAN=0 is special,
and we don't forget to add this check in new places.

This fixes a harmless error message displaying when adding a VLAN from
within a VF. The message was meaningless but there is no reason to
confuse end users and system administrators, and this is now avoided.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When a user gives an invalid command to change a private flag which is
not supported, either because it is read-only, or the device is not
capable of the feature, we simply ignore the request.

A naive solution would simply be to report error codes when one of the
flags was not supported. However, this causes problems because it makes
the operation not atomic. If a user requests multiple private flags
together at once we could end up changing one before failing at the
second flag.

We can do a bit better if we instead update a temporary copy of the
flags variable in the loop, and then copy it into place after. If we
aren't careful this has the pitfall of potentially silently overwriting
any changes caused by other threads.

Avoid this by using cmpxchg64 which will compare and swap the flags
variable only if it currently matched the old value. We'll report
-EAGAIN in the (hopefully rare!) case where the cmpxchg64 fails.

This ensures that we can properly report when flags are not supported in
an atomic fashion without the risk of overwriting other threads changes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a problem with the HW ATR eviction feature where the
NVM setting was incorrect.  This patch detects the issue on X720
adapters and disables the feature if the NVM setting is incorrect.

Without this patch, HW ATR Evict feature does not work on broken NVMs
and is not detected either.  If the HW ATR Evict feature is disabled
the SW Eviction feature will take effect.
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Since commit b499ffb0 ("i40e: Look up MAC address in Open Firmware
or IDPROM"), we've had support for obtaining the MAC address
form Open Firmware or IDPROM.

This code relied on sending the Open Firmware address directly to the
device firmware instead of relying on our MAC/VLAN filter list. Thus,
a work around was introduced in commit b1b15df5 ("i40e: Explicitly
write platform-specific mac address after PF reset")

We refactored the Open Firmware address enablement code in the ill-named
commit 41c4c2b5 ("i40e: allow look-up of MAC address from Open
Firmware or IDPROM")

Since this refactor, we no longer even set I40E_FLAG_PF_MAC. Further, we
don't need this work around, because we actually store the MAC address
as part of the MAC/VLAN filter hash. Thus, we will restore the address
correctly upon reset.

The refactor above failed to revert the workaround, so do that now.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The number of flags found in pf->flags has grown quite large, and there
are a lot of different types of flags. Most of the flags are simply
hardware features which are enabled on some firmware or some MAC types.
Other flags are dynamic run-time flags which enable or disable certain
features of the driver.

Separate these two types of flags into pf->hw_features and pf->flags.
The hw_features list will contain a set of features which are enabled at
init time. This will not contain toggles or otherwise dynamically
changing features. These flags should not need atomic protections, as
they will be set once during init and then be essentially read only.

Everything else will remain in the flags variable. These flags may be
modified at any time during run time. A future patch may wish to convert
these flags into set_bit/clear_bit/test_bit or similar approach to
ensure atomic correctness.

The I40E_FLAG_MFP_ENABLED flag may be a good fit for hw_features but
currently is used by ethtool in the private flags settings, and thus has
been left as part of flags.

Additionally, I40E_FLAG_DCB_CAPABLE may be a good fit for the
hw_features but this patch has not tried to untangle it yet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The X722 pf flag setup should happen before the VMDq RSS queue count is
initialized for VMDq VSI to get the right number of queues for RSS in
case of X722 devices.
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently i40evf_close() can return before state transitions to
__I40EVF_DOWN because of the latency involved in processing and
receiving response from PF driver and scheduling of VF watchdog_task.
Due to this inconsistency an immediate call to i40evf_open() fails
because state is still DOWN_PENDING.

When a VF interface is in up state and we try to add it as slave,
The bonding driver calls dev_close() and dev_open() in short duration
resulting in dev_open returning error. The ifenslave command needs
to be run again for dev_open to succeed.

This fix ensures that watchdog timer is scheduled immediately after
admin queue operations are scheduled in i40evf_down(). In addition a
wait condition is added at the end of i40evf_close so that function
wont return when state is still DOWN_PENDING. The timeout value is
chosen after some profiling and includes some buffer.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that the kernel supports double VLAN tags, we should at least play
nice. Adjust the max packet size to account for two VLAN tags, not just
one.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

commit bbb03029 ("strparser: Generalize strparser") added more
function pointers to 'struct strp_callbacks'; however, kcm_attach() was
not updated to initialize them.  This could cause the ->lock() and/or
->unlock() function pointers to be set to garbage values, causing a
crash in strp_work().

Fix the bug by moving the callback structs into static memory, so
unspecified members are zeroed.  Also constify them while we're at it.

This bug was found by syzkaller, which encountered the following splat:

    IP: 0x55
    PGD 3b1ca067
    P4D 3b1ca067
    PUD 3b12f067
    PMD 0

    Oops: 0010 [#1] SMP KASAN
    Dumping ftrace buffer:
       (ftrace buffer empty)
    Modules linked in:
    CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: kstrp strp_work
    task: ffff88006bb0e480 task.stack: ffff88006bb10000
    RIP: 0010:0x55
    RSP: 0018:ffff88006bb17540 EFLAGS: 00010246
    RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000
    RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48
    RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000
    R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48
    R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000
    FS:  0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098
     worker_thread+0x223/0x1860 kernel/workqueue.c:2233
     kthread+0x35e/0x430 kernel/kthread.c:231
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
    Code:  Bad RIP value.
    RIP: 0x55 RSP: ffff88006bb17540
    CR2: 0000000000000055
    ---[ end trace f0e4920047069cee ]---

Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and
CONFIG_AF_KCM=y):

    #include <linux/bpf.h>
    #include <linux/kcm.h>
    #include <linux/types.h>
    #include <stdint.h>
    #include <sys/ioctl.h>
    #include <sys/socket.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    static const struct bpf_insn bpf_insns[3] = {
        { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */
        { .code = 0x95 }, /* BPF_EXIT_INSN() */
    };

    static const union bpf_attr bpf_attr = {
        .prog_type = 1,
        .insn_cnt = 2,
        .insns = (uintptr_t)&bpf_insns,
        .license = (uintptr_t)"",
    };

    int main(void)
    {
        int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD,
                             &bpf_attr, sizeof(bpf_attr));
        int inet_fd = socket(AF_INET, SOCK_STREAM, 0);
        int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0);

        ioctl(kcm_fd, SIOCKCMATTACH,
              &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd });
    }

Fixes: bbb03029 ("strparser: Generalize strparser")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We now remove rndis filter before unregister_netdev(), which calls
device close. It involves closing rndis filter already removed.

This patch fixes this error.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-08-24

This series includes updates to mlx5 core driver.

From Gal and Saeed, three cleanup patches.
From Matan, Low level flow steering improvements and optimizations,
 - Use more efficient data structures for flow steering objects handling.
 - Add tracepoints to flow steering operations.
 - Overall these patches improve flow steering rule insertion rate by a
   factor of seven in large scales (~50K rules or more).

====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We never set the error code in this function.

Fixes: eabf0fad ("net-next/hinic: Initialize api cmd resources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

txq_reclaim() does the normal transmit queue reclamation and
rxq_deinit() does the RX ring cleanup, none of these are packet drops,
so use dev_consume_skb() for both locations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>