The timestamp field was split into rx_ts and tx_ts, and the rx/tx_status
fields were moved. Update the doc accordingly.

Also fix a bug that stated that a non-zero tx_status field signaled an
error. That's not true, since TX_STATUS_OK is 1, not 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those characters are used for citations. Better to escape, to
avoid them to be misinterpreted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

According with ReST spec, footnotes should be like:
[#name], and not [name]. So, change them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Document V4L2_DV_PROGRESSIVE and V4L2_DV_INTERLACED and
fix missing references.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix missing documentation, and its cross reference.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix it by adding a header to the flat-table to match to
the list of define symbols.

As a side-effect, it also removes some exceptions from
videodev2.h.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Reorganize the LIRC rst files, using "-" instead of "_" on
their names, and creating a separate chapter for syscalls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add LIRC_SET_[REC|SEND]_MODE ioctls to the corresponding
GET functions, and put all LIRC modes altogether.

As now everything is already documented on its own ioctl
pages, get rid of lirc_ioctl.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Put documentation for this ioctl on a separate page and
improve it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Place documentation for this ioctl on its own page.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add a separate page for this ioctl and improve its documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add a separate page for this ioctl and adds the cross-references.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add proper documentation for this ioctl, providing some
additional information about its usage.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Put each ioctl on its own page and improve documentation, adding
cross-references for LIRC_SET_REC_CARRIER_RANGE and LIRC_SET_REC_CARRIER,
with can be used together to set a carrier frequency range.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Put documentation for this ioctl on its own page.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Improve the documentation for those ioctls, adding them to
a separate file, in order to look like the rest of the
book, and to later allow to generate a man page for those
ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add a separate page for this ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Improve the documentation for this ioctl, adding it to
a separate file, in order to look like the rest of the
book, and to later allow to generate a man page for this
ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Move the documentation of this ioctl from lirc_ioctl to its
own file, and add a short description about the pulse mode
used by IR RX.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Some references were broken. It was also mentioning LIRC_MODE_RAW,
with it is not implemented on current LIRC drivers.

So, fix the references.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Move the documentation of this ioctl from lirc_ioctl to its
own file, and add a short description about the pulse mode
used by IR TX.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The references pointed by LIRC_GET_FEATURES ioctl are broken.

Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As we removed those ioctls from the header file, do the
same at the documentation side.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

While reviewing the documentation gaps on LIRC, it was
noticed that several ioctls aren't used by any LIRC drivers
(nor at staging or mainstream).

It doesn't make sense to document them, as they're not used
anywhere. So, let's remove those from the lirc header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

changeset 68cd5e0b ("[media] doc-rst: add LIRC header to the book")
did everything but adding the lirc-reader.rst :-p

My fault: I forgot to do a git add for this guy on such
changeset.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The documentation for this ioctl was really crappy.

Add a better documentation, using the lirc.4 man pages as a
reference, plus what was written originally at the lirc-ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are several notes and warning mesages in the middle of
the media docbook. Use the ReST tags for that, as it makes
them visually better and hightlights them.

While here, modify a few ones to make them clearer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are several notes for this DTV property. Some are
outdated, so take some care of it, making it updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Make the note better formatted and documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Unfortunately, captions are new on Sphinx for c blocks: it was
added only on version 1.3. Also, it were already bad enough
not being able to auto-numerate them.

So, let's give up and use, instead, titles before the examples.
Not much is lost, and, as a side track, we don't need to
numerate them anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Now that the LIRC header was added, we can cross-reference it
and identify the documentation gaps.

There are lots of stuff missing there, but at least now we
can avoid the gap to increase.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Just like the other parts of the document, let's add the LIRC
header, as it is part of the API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The lirc syscall documentation uses a very different and
simplified way than the rest of the media book. make it
closer. Still, there's just one page for all ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Some files start with an upper letter. Also, they have big
names. rename them.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There's no need to say: Table of Contents there. Also, this
generates a duplicated caption xref. So, remove, to use the
same format on every part.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Just like the other parts of the media book, group the MC
functions together on one chapter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Within the old section hierarchy, all doc parts has been placed under
the introduction, e.g:

* Linux Media Infrastructure API
    + Introduction
        - Video for Linux API
        - Digital TV API
        - ...

With separating the introduction sibling to the other parts
we get a more common section hierarchy:

* Linux Media Infrastructure API
    + Introduction
    + Video for Linux API
    + Digital TV API
    + ...

BTW: compacting the intro text.

This patch is on top of media_tree/docs-next
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>

Better organize the contents of the CEC part, moving the
introduction to chapter 1, placing all ioctls at chapter 2
and numerating all chapters and items.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adding the header file is interesting for several reasons:

1) It makes MC documentation consistend with other parts;
2) The header file can be used as a quick index to all API
   elements;
3) The cross-reference check helps to identify symbols that
   aren't documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

* topic/cec:
  [media] DocBook/media: add CEC documentation
  [media] s5p_cec: get rid of an unused var
  [media] move s5p-cec to staging
  [media] vivid: add CEC emulation
  [media] cec: s5p-cec: Add s5p-cec driver
  [media] cec: adv7511: add cec support
  [media] cec: adv7842: add cec support
  [media] cec: adv7604: add cec support
  [media] cec: add compat32 ioctl support
  [media] cec/TODO: add TODO file so we know why this is still in staging
  [media] cec: add HDMI CEC framework (api)
  [media] cec: add HDMI CEC framework (adapter)
  [media] cec: add HDMI CEC framework (core)
  [media] cec-funcs.h: static inlines to pack/unpack CEC messages
  [media] cec.h: add cec header
  [media] cec-edid: add module for EDID CEC helper functions
  [media] cec.txt: add CEC framework documentation
  [media] rc: Add HDMI CEC protocol handling
  Input: add HDMI CEC specific keycodes
  Input: add BUS_CEC type