- 07 Sep, 2010 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: checking for NULL instead of ERR_PTR
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ftdi_sio: Added custom PIDs for ChamSys products USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors. USB: cdc-acm: Add pseudo modem without AT command capabilities USB: cxacru: Use a bulk/int URB to access the command endpoint usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters. USB: cdc-acm: Adding second ACM channel support for various Nokia and one Samsung phones usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P. USB: ssu100: turn off debug flag usb: allow drivers to use allocated bandwidth until unbound USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile. USB: cp210x: Add B&G H3000 link cable ID USB: CP210x Add new device ID USB: option: fix incorrect novatel entries USB: Fix kernel oops with g_ether and Windows USB: rndis: section mismatch fix USB: ehci-ppc-of: problems in unwind USB: s3c-hsotg: Remove DEBUG define
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix tty_line must not be equal to number of allocated tty pointers in tty driver serial: bfin_sport_uart: restore transmit frame sync fix serial: fix port type conflict between NS16550A & U6_16550A MAINTAINERS: orphan isicom vt: Fix console corruption on driver hand-over.
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: do not oops when erroneous PEB is scheduled for scrubbing UBI: fix kconfig unmet dependency UBI: fix forward compatibility UBI: eliminate update of list_for_each_entry loop cursor
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix leak of shadow dat inode in error path of load_nilfs
-
git://anongit.freedesktop.org/~ickle/drm-intelLinus Torvalds authored
* 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intel: (25 commits) intel_agp,i915: Add more sandybridge graphics device ids drm/i915: Enable MI_FLUSH on Sandybridge agp/intel: Fix cache control for Sandybridge agp/intel: use #ifdef idiom for intel-agp.h agp/intel: fix physical address mask bits for sandybridge drm/i915: Prevent double dpms on drm/i915: Avoid use of uninitialised values when disabling panel-fitter drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt drm/i915: Tightly scope intel_encoder to prevent invalid use drm/i915: Allocate the PCI resource for the MCHBAR drm/i915/dp: Really try 5 times before giving up. drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOS drm/i915/dp: Boost timeout for enabling transcoder to 100ms drm/i915: Re-use set_base_atomic to share setting of the display registers drm/i915: Fix offset page-flips on i965+ drm/i915: Include a generation number in the device info i915: return -EFAULT if copy_to_user fails i915: return -EFAULT if copy_to_user fails agp/intel: Promote warning about failure to setup flush to error. drm/i915: overlay on gen2 can't address above 1G ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Do not force 1024x768 modes on unknown connectors drm/kms: Add a module parameter to disable polling drm/radeon/kms: fix tv-out on avivo asics drm/radeon/kms/evergreen: fix gpu hangs in userspace accel code drm/nv50: initialize ramht_refs list for faked 0 channel drm/nouveau: Don't take struct_mutex around the pushbuf IOCTL. drm/nouveau: Take fence spinlock before reading the last sequence. drm/radeon/kms/evergreen: work around bad data in some i2c tables drm/radeon/kms: properly set crtc high base on r7xx drm/radeon/kms: fix tv module parameter drm/radeon/kms: force legacy pll algo for RV515 LVDS drm/radeon/kms: remove useless clock code drm/radeon/kms: fix a regression on r7xx AGP due to the HDP flush fix drm/radeon/kms: use tracked values for sclk and mclk
-
Greg Ungerer authored
Recent changes to linker segments that hold per-cpu data broke linking for m68knommu targets: LD vmlinux /usr/local/bin/m68k-uclinux-ld.real: error: no memory region specified for loadable section `.data..shared_aligned' Add missing segments into the m68knommu linker script. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Fix missing consts in h8300's kernel_execve(): arch/h8300/kernel/sys_h8300.c: In function 'kernel_execve': arch/h8300/kernel/sys_h8300.c:59: warning: initialization from incompatible pointer type arch/h8300/kernel/sys_h8300.c:60: warning: initialization from incompatible pointer type Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Fix h8300's die() to take care of a number of problems: CC arch/h8300/kernel/traps.o In file included from arch/h8300/include/asm/bitops.h:10, from include/linux/bitops.h:22, from include/linux/kernel.h:17, from include/linux/sched.h:54, from arch/h8300/kernel/traps.c:18: arch/h8300/include/asm/system.h:136: warning: 'struct pt_regs' declared inside parameter list arch/h8300/include/asm/system.h:136: warning: its scope is only this definition or declaration, which is probably not what you want arch/h8300/kernel/traps.c:100: error: conflicting types for 'die' arch/h8300/include/asm/system.h:136: error: previous declaration of 'die' was here make[2]: *** [arch/h8300/kernel/traps.o] Error 1 Signed-off-by: -
David Howells authored
Fix h8300's asm/atomic.h to store the IRQ flags in an unsigned long to deal with warnings of the following type: arch/h8300/include/asm/atomic.h: In function 'atomic_add_return': arch/h8300/include/asm/atomic.h:22: warning: comparison of distinct pointer types lacks a cast arch/h8300/include/asm/atomic.h:24: warning: comparison of distinct pointer types lacks a cast Signed-off-by:
-
Valerie Aurora authored
Sanity check the flags passed to change_mnt_propagation(). Exactly one flag should be set. Return EINVAL otherwise. Userspace can pass in arbitrary combinations of MS_* flags to mount(). do_change_type() is called if any of MS_SHARED, MS_PRIVATE, MS_SLAVE, or MS_UNBINDABLE is set. do_change_type() clears MS_REC and then calls change_mnt_propagation() with the rest of the user-supplied flags. change_mnt_propagation() clearly assumes only one flag is set but do_change_type() does not check that this is true. For example, mount() with flags MS_SHARED | MS_RDONLY does not actually make the mount shared or read-only but does clear MNT_UNBINDABLE. Signed-off-by:
Valerie Aurora <vaurora@redhat.com> Signed-off-by:
-
Zhenyu Wang authored
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge, and graphics device ids for server sandybridge. Also rename original ids string to reflect GT1 version. Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Zhenyu Wang authored
MI_FLUSH is being deprecated, but still available on Sandybridge. Make sure it's enabled as userspace still uses MI_FLUSH. Signed-off-by:
-
Zhenyu Wang authored
Sandybridge GTT has new cache control bits in PTE, which controls graphics page cache in LLC or LLC/MLC, so we need to extend the mask function to respect the new bits. And set cache control to always LLC only by default on Gen6. Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
-
Zhenyu Wang authored
It should shift bit 39-32 into pte's bit 11-4. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Chris Wilson authored
Arguably this is a bug in drm-core in that we should not be called twice in succession with DPMS_ON, however this is still occuring and we see FDI link training failures on the second call leading to the occassional blank display. For the time being ignore the repeated call. Original patch by Dave Airlie <airlied@redhat.com> Signed-off-by: -
Chris Wilson authored
We were passing garbage values into the panel-fitter control register when disabling it on Ironlake - those values (filter modes and reserved MBZ bits) would have then be re-used the next time panel-fitting was enabled. Signed-off-by: -
Simon Farnsworth authored
When we miss the flip prepare interrupt, we never get into the software state needed to restart userspace, resulting in a freeze of a full-screen OpenGL application (such as a compositor). Work around this by checking DSPxSURF/DSPxBASE to see if the page flip has actually happened. If it has, do the work we would have done when the flip prepare interrupt comes in. Also, add debugfs information to tell us what's going on (based on the patch from Chris Wilson attached to bugs.fdo bug #29798). Signed-off-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by:
-
Chris Wilson authored
We reset intel_encoder for every matching encoder whilst iterating over the encoders attached to this crtc when changing mode. As such in a cloned configuration intel_encoder may not correspond to the correct is_edp encoder. By scoping intel_encoder to the loop, not only is the compiler able to spot this mistake, we also improve readiability for ourselves. [It might not be a mistake, within this function it is unclear as to whether it is permissable for eDP to be cloned...] Signed-off-by: -
Chris Wilson authored
We were failing when trying to allocate the resource for MMIO of the MCHBAR because we forgot to specify what type of resource we wanted. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Chris Wilson authored
Only stop trying if the aux channel sucessfully reports that the transmission was completed, otherwise try again. On the 5th failure, bail and report that something is amiss. This fixes a sporadic failure in reading the EDID for my external panel over DP. Signed-off-by: -
Chris Wilson authored
If the VBIOS tells us the mapping of the SDVO device onto the DDC bus, use it. However, if there is no VBIOS available that mapping is uninitialised and we should fallback to our earlier guess. Fix regression introduced in b1083333 (which in turn is a fix for the regression caused by the introduction of this guess, 14571b4c). References: Bug 29499 - [945GM] Screen disconnected because of missing VBIOS https://bugs.freedesktop.org/show_bug.cgi?id=29499 Bug 15109 - i945GM fails to detect EDID on DVI port https://bugzilla.kernel.org/show_bug.cgi?id=15109Signed-off-by:
Paul Neumann <paul104x@yahoo.de> Cc: Adam Jackson <ajax@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org
-
Chris Wilson authored
Adam Hill reported that his Arrandale system required a much longer, up to 200x500us, wait for the panel to initialise or else modesetting would fail. References: https://bugs.freedesktop.org/show_bug.cgi?id=29141Signed-off-by:
Adam Hill <sidepipeuk@yahoo.co.uk>
-
Chris Wilson authored
Lets try to avoid repeating old bugs. Signed-off-by:
-
Chris Wilson authored
i965 uses the Display Registers to compute the offset from the display base so the new base does not need adjusting when flipping. The older chipsets use a fence to access the display and so do perceive the surface as linear and have a single base register which is reprogrammed using the flip. Signed-off-by:
Marty Jack <martyj19@comcast.net> Reviewed-by:
-
Chris Wilson authored
To simplify the IS_GEN[234] macros and to enable switching. Signed-off-by:
-
- 06 Sep, 2010 12 commits
-
-
Dan Carpenter authored
copy_to_user() returns the number of bytes remaining to be copied and I'm pretty sure we want to return a negative error code here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
copy_to_user returns the number of bytes remaining to be copied, but we want to return a negative error code here. These are returned to userspace. Signed-off-by:
-
Chris Wilson authored
Make sure we always detect when we fail to correctly allocate the Isoch Flush Page and print an error to warn the user about the likely memory corruption that will result in invalid rendering or worse. Signed-off-by: -
Daniel Vetter authored
So set the coherent dma mask accordingly. This dma mask is only used for physical objects, so it won't really matter allocation-wise. Now this never really surfaced because sane 32bit kernels only have 1G of lowmem. But some eager testers (distros?) still carry around the patch to adjust lowmem via a kconfig option. And the kernel seems to favour high allocations on boot-up, hence the overlay blowing up reliably. Because the patch is tiny and nicely shows how broken gen2 is it's imho worth to merge despite the fact that mucking around with the lowmem/ highmem division is (no longer) supported. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28318 Cc: stable@kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
The vblank status bit is a sticky bit that must be cleared with a write of '1' prior to polling for the next vblank. Signed-off-by:
Sitsofe Wheeler <sitsofe@yahoo.com> jbarnes: I'd still rather see a lock, but I think you're right that we don't generally wait in code that needs not to miss an interrupt. Reviewed-by:
-
Pekka Enberg authored
Partial revert of 9d0498a2. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Tested-by:
Hugh Dickins <hughd@google.com> Tested-by:
Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Pavel Roskin authored
This fixes blur-like screen corruption on the following card: VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) intel_sdvo_mode_set() should not return prematurely just because some features are not supported. https://bugzilla.kernel.org/show_bug.cgi?id=17151Signed-off-by:
Pavel Roskin <proski@gnu.org> Reported-by:
Jonathan Corbet <corbet@lwn.net> Reviewed-by:
-
Chris Wilson authored
This reverts commit 86f100b1. The kref API requires the handlecount to be initialised to one on object creation (so that kref_get() doesn't complain upon first use) so the dalliance in the drivers is required in order to sink the initial floating reference. Signed-off-by:
-
Andrew Morton authored
drivers/gpu/drm/i915/intel_overlay.c: In function 'intel_overlay_print_error_state': drivers/gpu/drm/i915/intel_overlay.c:1467: error: implicit declaration of function 'seq_printf' Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16811Reported-by:
Martin Ziegler <ziegler@uni-freiburg.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Cc: Andre Muller <andremuellerster@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Chris Wilson authored
Only fallback to a set of default modes on a connector iff that connector is known to be connected. The issue occurs that with limited hardware which cannot probe a connector and so reports the connector status as unknown will then attempt to retrieve the modes for it during drm_helper_probe_single_connector_modes(). Should that fail, the helper then generates a default set which fools the fb_helper and causes havoc with the console and beyond. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
Polling for a VGA device on an old system can be quite expensive, causing latencies on the order of 600ms. As we hold the mode mutex for this time and also need the same mutex to move the cursor, we trigger a user-visible stall. The real solution would involve improving the granulatity of the locking and so perhaps performing some of the probing not under the lock or some other updates can be done under different locks. Also reducing the cost of probing for a non-existent monitor would be worthwhile. However, exposing a parameter to disable polling is a simple workaround in the meantime. In order to accommodate users turning polling on and off at runtime, the polling is potentially re-enabled on every probe. This is coupled to the user calling xrandr, which seems to be a vaild time to reset the polling timeout since the information on the connection has just been updated. (The presumption being that all connections are probed in a single xrandr pass, which is currently valid.) References: Bug 29536 - 2.6.35 causes ~600ms latency every 10s https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bug 16265 - Why is kslowd accumulating so much CPU time? https://bugzilla.kernel.org/show_bug.cgi?id=16265Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
-
Alex Deucher authored
digital underscan support regressed tv-out. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29985Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
