- 31 May, 2019 40 commits
-
-
Piotr Figiel authored
[ Upstream commit c80d26e8 ] brcmu_pkt_buf_free_skb emits WARNING when attempting to free a sk_buff which is part of any queue. After USB disconnect this may have happened when brcmf_fws_hanger_cleanup() is called as per-interface psq was never cleaned when removing the interface. Change brcmf_fws_macdesc_cleanup() in a way that it removes the corresponding packets from hanger table (to avoid double-free when brcmf_fws_hanger_cleanup() is called) and add a call to clean-up the interface specific packet queue. Below is a WARNING during USB disconnect with Raspberry Pi WiFi dongle running in AP mode. This was reproducible when the interface was transmitting during the disconnect and is fixed with this commit. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1171 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x3c/0x40 Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 1171 Comm: kworker/0:0 Not tainted 4.19.23-00075-gde33ed8 #99 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8010ff84>] (unwind_backtrace) from [<8010bb64>] (show_stack+0x10/0x14) [<8010bb64>] (show_stack) from [<80840278>] (dump_stack+0x88/0x9c) [<80840278>] (dump_stack) from [<8011f5ec>] (__warn+0xfc/0x114) [<8011f5ec>] (__warn) from [<8011f71c>] (warn_slowpath_null+0x40/0x48) [<8011f71c>] (warn_slowpath_null) from [<805a476c>] (brcmu_pkt_buf_free_skb+0x3c/0x40) [<805a476c>] (brcmu_pkt_buf_free_skb) from [<805bb6c4>] (brcmf_fws_cleanup+0x1e4/0x22c) [<805bb6c4>] (brcmf_fws_cleanup) from [<805bc854>] (brcmf_fws_del_interface+0x58/0x68) [<805bc854>] (brcmf_fws_del_interface) from [<805b66ac>] (brcmf_remove_interface+0x40/0x150) [<805b66ac>] (brcmf_remove_interface) from [<805b6870>] (brcmf_detach+0x6c/0xb0) [<805b6870>] (brcmf_detach) from [<805bdbb8>] (brcmf_usb_disconnect+0x30/0x4c) [<805bdbb8>] (brcmf_usb_disconnect) from [<805e5d64>] (usb_unbind_interface+0x5c/0x1e0) [<805e5d64>] (usb_unbind_interface) from [<804aab10>] (device_release_driver_internal+0x154/0x1ec) [<804aab10>] (device_release_driver_internal) from [<804a97f4>] (bus_remove_device+0xcc/0xf8) [<804a97f4>] (bus_remove_device) from [<804a6fc0>] (device_del+0x118/0x308) [<804a6fc0>] (device_del) from [<805e488c>] (usb_disable_device+0xa0/0x1c8) [<805e488c>] (usb_disable_device) from [<805dcf98>] (usb_disconnect+0x70/0x1d8) [<805dcf98>] (usb_disconnect) from [<805ddd84>] (hub_event+0x464/0xf50) [<805ddd84>] (hub_event) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xecf8dfb0 to 0xecf8dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 38d234018e9e2a90 ]--- ------------[ cut here ]------------ Signed-off-by:
Piotr Figiel <p.figiel@camlintechnologies.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Piotr Figiel authored
[ Upstream commit a9fd0953 ] Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion which silences those warnings and improves code readability. Fix below errors when connecting the USB WiFi dongle: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2 BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434 last function: hub_event 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808) [<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ====================================================== WARNING: possible circular locking dependency detected 4.19.23-00084-g454a789-dirty #123 Not tainted ------------------------------------------------------ kworker/0:2/434 is trying to acquire lock: e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808 but task is already holding lock: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devinfo->dev_init_lock){+.+.}: mutex_lock_nested+0x1c/0x24 brcmf_usb_probe+0x78/0x550 [brcmfmac] usb_probe_interface+0xc0/0x1bc really_probe+0x228/0x2c0 __driver_attach+0xe4/0xe8 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x19c/0x214 driver_register+0x78/0x110 usb_register_driver+0x84/0x148 process_one_work+0x228/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #1 (brcmf_driver_work){+.+.}: worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #0 ((wq_completion)"events"){+.+.}: process_one_work+0x1b8/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) other info that might help us debug this: Chain exists of: (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devinfo->dev_init_lock); lock(brcmf_driver_work); lock(&devinfo->dev_init_lock); lock((wq_completion)"events"); *** DEADLOCK *** 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] stack backtrace: CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events request_firmware_work_func [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330) [<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30) [<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268) [<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808) [<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit d825db34 ] Clang warns about what is clearly a case of passing an uninitalized variable into a static function: drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here [-Werror,-Wuninitialized] lpphy_papd_cal(dev, gains, 0, 1, 30); ^~~~~ drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here struct lpphy_tx_gains gains, oldgains; ^ 1 error generated. However, this function is empty, and its arguments are never evaluated, so gcc in contrast does not warn here. Both compilers behave in a reasonable way as far as I can tell, so we should change the code to avoid the warning everywhere. We could just eliminate the lpphy_papd_cal() function entirely, given that it has had the TODO comment in it for 10 years now and is rather unlikely to ever get done. I'm doing a simpler change here, and just pass the 'oldgains' variable in that has been initialized, based on the guess that this is what was originally meant. Fixes: 2c0d6100 ("b43: LP-PHY: Begin implementing calibration & software RFKILL support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 46953f97 ] In case kmemdup fails, the fix sets conn_info->req_ie_len and conn_info->resp_ie_len to zero to avoid buffer overflows. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 003b686a ] 'hostcmd' is alloced by kzalloc, should be freed before leaving from the error handling cases, otherwise it will cause mem leak. Fixes: 3935ccc1 ("mwifiex: add cfg80211 testmode support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 76597628 ] In case alloc_workqueue fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by:
-
Daniel T. Lee authored
[ Upstream commit 0979ff79 ] Currently, ksym_search located at trace_helpers won't check symbols are existing or not. In ksym_search, when symbol is not found, it will return &syms[0](_stext). But when the kernel symbols are not loaded, it will return NULL, which is not a desired action. This commit will add verification logic whether symbols are loaded prior to the symbol search. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jian Shen authored
[ Upstream commit 389775a6 ] It used netdev->uc and netdev->mc list in function hns3_recover_hw_addr() and hns3_remove_hw_addr(). We should add protect for them. Fixes: f05e2109 ("net: hns3: Clear mac vlan table entries when unload driver or function reset") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit c4e401e5 ] hns3_get_stats() should check the resetting status firstly, since the device will be reinitialized when resetting. If the reset has not completed, the hns3_get_stats() may access invalid memory. Signed-off-by:
-
Justin Chen authored
[ Upstream commit abbde279 ] Indio->mlock is used for protecting the different iio device modes. It is currently not being used in this way. Replace the lock with an internal lock specifically used for protecting the SPI transfer buffer. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 6f9ca1d3 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 536cc27d ] devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit df1d80ae ] For devices from the SigmaDelta family we need to keep CS low when doing a conversion, since the device will use the MISO line as a interrupt to indicate that the conversion is complete. This is why the driver locks the SPI bus and when the SPI bus is locked keeps as long as a conversion is going on. The current implementation gets one small detail wrong though. CS is only de-asserted after the SPI bus is unlocked. This means it is possible for a different SPI device on the same bus to send a message which would be wrongfully be addressed to the SigmaDelta device as well. Make sure that the last SPI transfer that is done while holding the SPI bus lock de-asserts the CS signal. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <Alexandru.Ardelean@analog.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit bc29d3a6 ] The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cnSigned-off-by:
-
Ranjani Sridharan authored
[ Upstream commit f96fb7d1 ] When the card is registered by the machine driver, dai link components are probed after the snd_card is created. This is done in snd_soc_bind_card() which calls snd_soc_instantiate_card() to first create the snd_card and then probes the link components by calling soc_probe_link_components(). The snd_card is used by the component driver to add the kcontrols associated with dapm widgets to the card. When the machine driver is unregistered, the snd_card is freed when the card resources are cleaned up. But the snd_card needs to be valid while unloading the topology dapm widgets in order to remove the kcontrols from the card. Since, unloading topology is done when the component driver is removed, the link components should be removed in snd_soc_unbind_card(). This will ensure that the kcontrols are removed before the card resources are cleaned up and the snd_card itself is freed. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 06377301 ] Lockdep reports the following issue on my setup: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&rdev->disable_work)->work)); lock(regulator_list_mutex); lock((work_completion)(&(&rdev->disable_work)->work)); lock(regulator_list_mutex); The problem is that regulator_unregister takes the regulator_list_mutex and then calls flush_work on disable_work. But regulator_disable_work calls regulator_lock_dependent which will also take the regulator_list_mutex. Resulting in a deadlock if the flush_work call actually needs to flush the work. Fix this issue by moving the flush_work outside of the regulator_list_mutex. The list mutex is not used to guard the point at which the delayed work is queued, so its use adds no additional safety. Fixes: f8702f9e ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Andrey Smirnov authored
[ Upstream commit 0a919ae4 ] Move code calling spi_get_gpio_descs() to happen after ctlr->dev's name is set in order to have proper GPIO consumer names. Before: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |(null) CS1 ) out lo gpio-41 ( |(null) CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo After: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |spi0 CS1 ) out lo gpio-41 ( |spi0 CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Kees Cook authored
[ Upstream commit 7c21383f ] The LLVM linker (ld.lld) defaults to removing local relocations, which causes KASLR boot failures. ld.bfd and ld.gold already handle this correctly. This adds the explicit instruction "--discard-none" during the link phase. There is no change in output for ld.bfd and ld.gold, but ld.lld now produces an image with all the needed relocations. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: clang-built-linux@googlegroups.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190404214027.GA7324@beast Link: https://github.com/ClangBuiltLinux/linux/issues/404Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 636e78b1 ] clang started to error on invalid asm clobber usage in x86 headers and many bpf program samples failed to build with the message: CLANG-bpf /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.o In file included from /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.c:14: In file included from ../include/linux/in.h:23: In file included from ../include/uapi/linux/in.h:24: In file included from ../include/linux/socket.h:8: In file included from ../include/linux/uio.h:14: In file included from ../include/crypto/hash.h:16: In file included from ../include/linux/crypto.h:26: In file included from ../include/linux/uaccess.h:5: In file included from ../include/linux/sched.h:15: In file included from ../include/linux/sem.h:5: In file included from ../include/uapi/linux/sem.h:5: In file included from ../include/linux/ipc.h:9: In file included from ../include/linux/refcount.h:72: ../arch/x86/include/asm/refcount.h:72:36: error: asm-specifier for input or output variable conflicts with asm clobber list r->refs.counter, e, "er", i, "cx"); ^ ../arch/x86/include/asm/refcount.h:86:27: error: asm-specifier for input or output variable conflicts with asm clobber list r->refs.counter, e, "cx"); ^ 2 errors generated. Override volatile() to workaround the problem. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Oded Gabbay authored
[ Upstream commit caa3c8e5 ] This patch fixes a bug in the implementation of the function that removes the device. The bug can happen when the device is removed but not the driver itself (e.g. remove by the OS due to PCI freeze in Power architecture). In that case, there maybe open users that are calling IOCTLs while the device is removed. This is a possible race condition that the driver must handle. Otherwise, a kernel panic may occur. This race is prevented in the hard-reset flow, because the driver makes sure the users are closed before continuing with the hard-reset. This race can not occur when the driver itself is removed because the OS makes sure all the file descriptors are closed. The fix is to make sure the open users close their file descriptors and if they don't (after a certain amount of time), the driver sends them a SIGKILL, because the remove of the device can't be stopped. The patch re-uses the same code that is called from the hard-reset flow. Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Oded Gabbay authored
[ Upstream commit 9f201aba ] During hard-reset, contexts are closed as part of the tear-down process. After a context is closed, the driver cleans up the page tables of that context in the device's DRAM. This action is both dangerous and unnecessary. It is unnecessary, because the device is going through a hard-reset, which means the device's DRAM contents are no longer valid and the device's MMU is being reset. It is dangerous, because if the hard-reset came as a result of a PCI freeze, this action may cause the entire host machine to hang. Therefore, prevent all device PTE updates when a hard-reset operation is pending. Signed-off-by:
-
David Kozub authored
[ Upstream commit 78bf4735 ] The implementation of IOC_OPAL_ENABLE_DISABLE_MBR handled the value opal_mbr_data.enable_disable incorrectly: enable_disable is expected to be one of OPAL_MBR_ENABLE(0) or OPAL_MBR_DISABLE(1). enable_disable was passed directly to set_mbr_done and set_mbr_enable_disable where is was interpreted as either OPAL_TRUE(1) or OPAL_FALSE(0). The end result was that calling IOC_OPAL_ENABLE_DISABLE_MBR with OPAL_MBR_ENABLE actually disabled the shadow MBR and vice versa. This patch adds correct conversion from OPAL_MBR_DISABLE/ENABLE to OPAL_FALSE/TRUE. The change affects existing programs using IOC_OPAL_ENABLE_DISABLE_MBR but this is typically used only once when setting up an Opal drive. Acked-by:
Jon Derrick <jonathan.derrick@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wen Yang authored
[ Upstream commit b623fa32 ] The call to of_find_compatible_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/armada-8k-cpufreq.c:187:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 130, but without a corresponding object release within this function. ./drivers/cpufreq/armada-8k-cpufreq.c:191:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 130, but without a corresponding object release within this function. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit ddb64c5d ] The call to of_node_get returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/imx6q-cpufreq.c:391:4-10: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function. ./drivers/cpufreq/imx6q-cpufreq.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
[ Upstream commit 7c468966 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/kirkwood-cpufreq.c:127:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function. ./drivers/cpufreq/kirkwood-cpufreq.c:133:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function. and also do some cleanup: - of_node_put(np); - np = NULL; ... of_node_put(np); Signed-off-by:
-
Wen Yang authored
[ Upstream commit 8d10dc28 ] The call to of_find_node_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
[ Upstream commit a9acc26b ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. ./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
[ Upstream commit 23329803 ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 4339ef39 ] This patch adds error handler for the failure of command queue initialization both PF and VF. Signed-off-by:
-
Kristian Evensen authored
[ Upstream commit e4bf6348 ] Most, if not all, Quectel devices use dynamic interface numbers, and users are able to change the USB configuration at will. Matching on for example interface number is therefore not possible. Instead, the QMI device can be identified by looking at the interface class, subclass and protocol (all 0xff), as well as the number of endpoints. The reason we need to look at the number of endpoints, is that the diagnostic port interface has the same class, subclass and protocol as QMI. However, the diagnostic port only has two endpoints, while QMI has three. Until now, we have identified the QMI device by combining a match on class, subclass and protocol, with a call to the function quectel_diag_detect(). In quectel_diag_detect(), we check if the number of endpoints matches for known Quectel vendor/product ids. Adding new vendor/product ids to quectel_diag_detect() is not a good long-term solution. This commit replaces the function with a quirk, and applies the quirk to affected Quectel devices that I have been able to test the change with (EP06, EM12 and EC25). If the quirk is set and the number of endpoints equal two, we return from qmi_wwan_probe() with -ENODEV. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit e233516e ] When hclgevf_client_start() fails or VF driver unloaded, there is nobody to disable keep_alive_timer. So this patch fixes them. Fixes: a6d818e3 ("net: hns3: Add vport alive state checking support") Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit e14d314c ] Dan reported, that cleanup path in test_memcg_subtree_control() triggers a static checker warning: ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \ test_memcg_subtree_control() error: uninitialized symbol 'child2'. Fix this by initializing child2 and parent2 variables and split the cleanup path into few stages. Signed-off-by:
Roman Gushchin <guro@fb.com> Fixes: 84092dbc ("selftests: cgroup: add memory controller self-tests") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Wenjing Liu authored
[ Upstream commit e49f6936 ] [why] The existing calculation uses a wrong formula to calculate bandwidth from timing. [how] Expose the existing proper function that calculates the bandwidth, so dc_link can use it to calculate timing bandwidth correctly. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e91012ee ] clang points out that the declaration of cio_irb does not match the definition exactly, it is missing the alignment attribute: ../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ ^ ../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ ../drivers/s390/cio/cio.h:118:1: note: previous attribute is here DECLARE_PER_CPU(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ Use DECLARE_PER_CPU_ALIGNED() here, to make the two match. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thomas Huth authored
[ Upstream commit 81a8f2be ] If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains: CC arch/s390/mm/pgtable.o arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not used [-Wunused-function] static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr) ^~~~~~~~~~~~~ Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning. Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 2aa632c5 ] The brace initialization used here generates warnings on some compilers. For example, on GCC 4.9: [...] In function ‘dm_determine_update_type_for_commit’: [...] error: missing braces around initializer [-Werror=missing-braces] struct dc_stream_update stream_update = { 0 }; ^ Use memset to make this more portable. v2: Specify the compiler / diagnostic in the commit message (Paul) Cc: Sun peng Li <Sunpeng.Li@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Borislav Petkov authored
[ Upstream commit 24613a04 ] Commit 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present") added the new define UCODE_NEW to denote that an update should happen only when newer microcode (than installed on the system) has been found. But it missed adjusting that for the old /dev/cpu/microcode loading interface. Fix it. Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jannh@google.com> Link: https://lkml.kernel.org/r/20190405133010.24249-3-bp@alien8.deSigned-off-by:
-
Arnd Bergmann authored
[ Upstream commit 913140e2 ] The 'func_code' variable gets printed in debug statements without a prior initialization in multiple functions, as reported when building with clang: drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here trace_s390_zcrypt_rep(mex, func_code, rc, ^~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning unsigned int func_code; ^ Add initializations to all affected code paths to shut up the warning and make the warning output consistent. Signed-off-by:
-
Michael Tretter authored
[ Upstream commit c06e6440 ] The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit dfe7fb21 ] Most rk3288-based boards are derived from the EVB and thus use a PWM regulator for the logic rail. However, most rk3288-based boards don't specify the PWM regulator in their device tree. We'll deal with that by making it critical. NOTE: it's important to make it critical and not just IGNORE_UNUSED because all PWMs in the system share the same clock. We don't want another PWM user to turn the clock on and off and kill the logic rail. This change is in preparation for actually having the PWMs in the rk3288 device tree actually point to the proper PWM clock. Up until now they've all pointed to the clock for the old IP block and they've all worked due to the fact that rkpwm was IGNORE_UNUSED and that the clock rates for both clocks were the same. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
