- 03 Aug, 2014 14 commits
-
-
Ashish Shah authored
Add in an adapter state check to prevent re-arming watchdog timer after i40evf_remove has been called and timer has been deleted. Change-ID: I636ba7c6322be8cbf053231959f90c0a2d8d803a Signed-off-by:
Ashish Shah <ashish.n.shah@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ashish Shah authored
Previously defined state I40E_VFR_VFACTIVE uses bit 1 which is now set to "reserved." Update the state checks to also include I40E_VFR_COMPLETED. This change will allow the VF to work with both existing and future PFs. Change-ID: Ifd1d34f79f3b0ffd6d2550ee4dadc55825ff52f8 Signed-off-by:
-
Ashish Shah authored
Remove the ability of a VF to set unicast promiscuous mode. Considered to be a security risk to allow VFs to receive traffic intended for other VFs so don't allow it, simply ignore the flag. Also fix it to send the correct seid to aq for multicast promiscuous set. Change-ID: Icb9c49a281a8e9d3aeebf991ef1533ac82b84b14 Signed-off-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
Fixes comment for reset reason Change-ID: I6fda4fa292255e6eb0f874502b4d38d722149b10 Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Jesse Brandeburg authored
The driver was converted to use snprintf everywhere but this one function. Just use snprintf, instead of sprintf. Also a small spelling correction in a comment. Change-ID: I59d45f94a52754c7b4cd6034df9a61d8132b7f77 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Shannon Nelson authored
The local loopback should only be enabled for VSIs that are supporting cascaded VEBs or VEPA setups. This is not the case here, and we need to stop the VEB from echoing the VMDQ VSI packets back at the VSI. Change-ID: I9dfb6ac79db24d04360d7efde62d81e20abc5090 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Ashish Shah authored
The vf_id needs to be offset by the vf_base_id from hw function capabilities for the case of multiple PFs. Change-ID: I20ca8621f98e9cdf98649380b8eeaa35db52677c Signed-off-by:
-
Shannon Nelson authored
Now that the HW registers are no longer in debug mode and many are locked down for writes, we need to expose the Firmware API request used to do writes on the driver's behalf. Change-ID: I09a05c4dc9ea0b24c00193faac34d7799eaa8496 Signed-off-by:
-
Vasu Dev authored
Adds newly added FCoE files to the build but only if FCoE module is configured. Also, updates i40e document for added FCoE support. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by:
-
Vasu Dev authored
Adds FCoE specific code to existing i40e core driver to:- 1. have separate FCoE VSI with additional FCoE queues pairs. 2. have FCoE related hash defines. 3. have additional FCoE related stats code. 4. export and then re-use existing functions required by FCoE build. Signed-off-by:
-
Vasu Dev authored
This patch adds FCoE ( Fibre Channel Over Ethernet ) code for Intel XL710 adapters. This patch is limited to only new FCoE offloads code in newly added files by this patch and then following patches in the series modifies rest of the existing driver to enable FCoE with i40e driver. Signed-off-by:
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver update 2014-08-01 The following series of patches includes minor fixes/updates to the driver. - Remove some uses of spinlock around ethtool/phylib areas - Update Rx/Tx ready check logic ==================== Signed-off-by: -
Lendacky, Thomas authored
The current time range waiting for Rx/Tx to become ready can sometimes be too short if a connection is not present. Increase the number of retries and the sleep to give a bit more time. Also, change level of the message issued from _err to _dbg if Rx/Tx do not become ready since the underlying logic will function as if no link is established and retry eventually. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lendacky, Thomas authored
Remove the spinlocks around the ethtool get and set settings functions and within the link adjustment callback routine. Signed-off-by:
-
- 02 Aug, 2014 23 commits
-
-
Himangi Saraogi authored
This patch introduces the use of managed interfaces like devm_ioremap_resource and does away with the calls to free the allocated memory in the probe and remove functions. Also, some labels and variable are done away with. This fixes a bug as there was a missing release_mem_region in the remove function. Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Himangi Saraogi authored
This patch introduces the use of devm_ioremap_resource, devm_kmalloc and does away with the functions to free the allocated memory in the probe and remove functions. Also, some labels are done away with. A bug is fixed as two regions are allocated in the probe function, but only one is freed in the remove function. Signed-off-by:
-
Himangi Saraogi authored
This patch introduces the use of managed interfaces like devm_ioremap_resource and does away with the functions to free the allocated memory in the probe and remove functions. Also, many labels are done away with. The field size in no longer needed and is hence removed from the struct net_local. Signed-off-by:
-
Hisashi Nakamura authored
Signed-off-by:
Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: added bindings documentation] Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Patch 1 fixes a regression caused by a previous commit on net-next. Old versions of BE3 FW may not support cmds to re-provision (and hence optimize) resources/queues in SR-IOV config. Do not treat this FW cmd failure as fatal and fail the function initialization. Instead, just enable SR-IOV with the resources provided by the FW. Patch 2 ignores a VF mac address setting if the new mac is already active on the VF. Patch 3 adds support to delete a FW-dump via ethtool on Lancer adapters. ==================== Signed-off-by: -
Kalesh AP authored
This patch adds support to delete an existing FW-dump in Lancer via ethtool. Initiating a new dump is not allowed if a FW dump is already present in the adapter. The existing dump has to be first explicitly deleted. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
ndo_set_vf_mac() call may be issued for a mac-addr that is already active on a VF. If so, silently ignore the request. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
-
Sathya Perla authored
Old versions of BE3 FW may not support cmds to re-provision (and hence optimize) resources/queues in SR-IOV config. Do not treat this FW cmd failure as fatal and fail the function initialization. Instead, just enable SR-IOV with the resources provided by the FW. Prior to the "create optimal number of queues on SR-IOV config" patch such failures were ignored. Fixes: bec84e6b ("create optimal number of queues on SR-IOV config") Reported-by:
Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== inet: frags: cleanup and kmem_cache use This patchset does a couple of small cleanups in patches 1-5 and then in patch 06 it introduces the use of kmem_cache for allocation/freeing of inet_frag_queue+header objects. v2: Broke up patch 02 into 3 patches as David suggested Here are the results of a couple of netperf runs: netperf options: -l 30 -I95,5 -i 15,10 -m 64k - 10 gig before the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.155.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 442466 0 7551.39 212992 30.00 439130 7494.45 - 10 gig after the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.155.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 458846 0 7830.94 212992 30.00 457575 7809.25 - Virtio before the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.144.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 735000 0 12543.96 212992 30.00 560322 9562.79 - Virtio after the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.144.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 731729 0 12488.14 212992 30.00 647241 11046.21 ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Use kmem_cache to allocate/free inet_frag_queue objects since they're all the same size per inet_frags user and are alloced/freed in high volumes thus making it a perfect case for kmem_cache. Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Nikolay Aleksandrov authored
Now that we have INET_FRAG_EVICTED we might as well use it to stop sending icmp messages in the "frag_expire" functions instead of stripping INET_FRAG_FIRST_IN from their flags when evicting. Also fix the comment style in ip6_expire_frag_queue(). Signed-off-by:
-
Nikolay Aleksandrov authored
Fix a couple of functions' declaration alignments. Signed-off-by:
-
Nikolay Aleksandrov authored
Move the flags to an enum definion, swap FIRST_IN/LAST_IN to be in increasing order and add comments explaining each flag and the inet_frag_queue struct members. Signed-off-by:
-
Nikolay Aleksandrov authored
The last_in field has been used to store various flags different from first/last frag in so give it a more descriptive name: flags. Signed-off-by:
-
Nikolay Aleksandrov authored
Softirqs are already disabled so no need to do it again, thus let's be consistent and use the IP6_INC_STATS_BH variant. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Dan Carpenter authored
The dm9000_release_board() function is called with NULL ->data_req and ->addr_req pointers if dm9000_probe() fails. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Duan Jiong authored
ip_local_deliver_finish() already have a rcu_read_lock/unlock, so the rcu_read_lock/unlock is unnecessary. See the stack below: ip_local_deliver_finish | | ->icmp_rcv | | ->icmp_socket_deliver Suggested-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== net: filter: split sk_filter into socket and bpf, cleanup names The main goal of the series is to split 'struct sk_filter' into socket and bpf parts and cleanup names in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases: isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf which don't need refcnt/rcu fields. It's a follow up to the rcu cleanup started by Pablo in commit 34c5bd66 ("net: filter: don't release unattached filter through call_rcu()") Patch 1 - cleans up socket memory charging and makes it possible for functions sk(bpf)_migrate_filter(), sk(bpf)_prepare_filter() to be socket independent Patches 2-4 - trivial renames Patch 5 - sk_filter split and renames of related sk_*() functions ==================== Signed-off-by: -
Alexei Starovoitov authored
clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by:Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexei Starovoitov authored
to indicate that this function is converting classic BPF into eBPF and not related to sockets Signed-off-by:
-
Alexei Starovoitov authored
trivial rename to indicate that this functions performs classic BPF checking Signed-off-by:
-
Alexei Starovoitov authored
trivial rename to better match semantics of macro Signed-off-by:
-
Alexei Starovoitov authored
attaching bpf program to a socket involves multiple socket memory arithmetic, since size of 'sk_filter' is changing when classic BPF is converted to eBPF. Also common path of program creation has to deal with two ways of freeing the memory. Simplify the code by delaying socket charging until program is ready and its size is known Signed-off-by:
-
- 01 Aug, 2014 3 commits
-
-
Duan Jiong authored
Signed-off-by:
-
Dan Carpenter authored
1) We don't allocate enough space for the NUL terminator so we end up corrupting one character beyond the end of the buffer. 2) The "len - 1" should just be "len". The code is trying to copy a word from a buffer up to a comma or the last word in the buffer. Say you have the buffer, "foo,bar,baz", then this code truncates the last letter off each word so you get "fo", "ba", and "ba". You would hope this kind of bug would get noticed in testing... I'm not very familiar with this code and I can't test it, but I think we should copy the final character. Signed-off-by:
-
Freddy Xin authored
Add functions to support ethtool EEE manipulating, and the EEE is disabled in default setting to enhance the compatibility with certain switch. Signed-off-by:
Freddy Xin <freddy@asix.com.tw> Signed-off-by:
-
