- 14 Mar, 2013 4 commits
-
-
Devendra Naga authored
got the warnings drivers/staging/csr/sme_wext.c: In function ‘unifi_siwscan’: drivers/staging/csr/sme_wext.c:1276:9: warning: variable ‘scantype’ set but not used [-Wunused-but-set-variable] fixed by removing the variable Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jacob Garber authored
This is a patch to usbdux.c that fixes the camel case warnings found by the checkpatch.pl tool Signed-off-by:
Jacob Garber <ajtgarber@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
-
Paul Zimmerman authored
Fix some compiler warnings when building for i386 arch. Reported by Fengguang's build-bot. Signed-off-by:
-
- 12 Mar, 2013 11 commits
-
-
H Hartley Sweeten authored
The following commits introduced a couple build errors in this driver due to the removal of some macros in ni_stc.h. commit: f5a1d92b "staging: comedi: ni_stc.h: remove n_ni_boards macro" commit: 6293e357 "staging: comedi: ni_stc.h: remove boardtype macro" The n_ni_boards macro is an open coded version of ARRAY_SIZE. The boardtype macro is removed in favor of using the comedi_board() helper and accessing the boardinfo with a pointer. Fix both issues. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Zhang Yanfei authored
remove cast for kmalloc return value. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Devendra Naga authored
should be err < 0 instead of if (err) which actually the read register value can be a positive number Acked-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Frank Mori Hess authored
New comedi driver for Advantech PCI-1724U with modifications by Ian Abbott <abbotti@mev.co.uk>. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by:
-
Ian Abbott authored
The Advantech PCI-1710HG is similar to the PCI-1710 but has a different set of ranges for analog input (HG = high gain). Because they share the same PCI vendor and device ID, the adv_pci1710 driver does not currently distinguish them. This is more of a problem since auto-configuration code was added to the driver (and manual configuration support removed), as the PCI-1710HG would be automatically configured as a PCI-1710. More recently, the unused code for PCI-1710HG support was #ifdef'ed out. In fact, the PCI-1710 and PCI-1710HG can be distinguished by considering the PCI subvendor and subdevice IDs according to the following table: vendor device subven subdev model treat as ====== ====== ====== ====== ============ ========== 0x13fe 0x1710 0x10b5 0x9050 PCI-1710S PCI-1710 0x13fe 0x1710 0x13fe 0x0000 PCI-1710 PCI-1710 0x13fe 0x1710 0x13fe 0xb100 PCI-1710B PCI-1710 0x13fe 0x1710 0x13fe 0xb200 PCI-1710B2 PCI-1710 0x13fe 0x1710 0x13fe 0xc100 PCI-1710C PCI-1710 0x13fe 0x1710 0x13fe 0xc200 PCI-1710C2 PCI-1710 0x13fe 0x1710 0x1000 0xd100 PCI-1710U PCI-1710 0x13fe 0x1710 0x13fe 0x0002 PCI-1710HG PCI-1710HG 0x13fe 0x1710 0x13fe 0xb102 PCI-1710HGB PCI-1710HG 0x13fe 0x1710 0x13fe 0xb202 PCI-1710HGB2 PCI-1710HG 0x13fe 0x1710 0x13fe 0xc102 PCI-1710HGC PCI-1710HG 0x13fe 0x1710 0x13fe 0xc202 PCI-1710HGC2 PCI-1710HG 0x13fe 0x1710 0x1000 0xd102 PCI-1710HGU PCI-1710HG The above information is extracted from Advantech's own GPL'ed Linux (non-Comedi) driver source from "advdaq-1.10.0001-1.tar.bz2" on their website. (0x13fe = PCI_VENDOR_ID_ADVANTECH, 0x10b5 = PCI_VENDOR_ID_PLX, 0x9050 = PCI_DEVICE_ID_PLX_9050, 0x1000 = PCI_VENDOR_ID_NCR or PCI_VENDOR_ID_LSI_LOGIC but I assume this subvendor ID was chosen "randomly".) Signed-off-by:
-
Paul Zimmerman authored
Add the DWC2 Kconfig and Makefile, and modify the staging Kconfig and Makefile to include them Signed-off-by:
-
Paul Zimmerman authored
Add myself as maintainer of the DWC2 driver Signed-off-by:
-
Paul Zimmerman authored
This file contains the PCI bus interface "glue" for the DWC2 driver Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Paul Zimmerman authored
This file contains code to support the HCD descriptor DMA mode of the controller Signed-off-by:
-
Paul Zimmerman authored
These files contain the HCD code, and implement the Linux hc_driver API. Support for both slave mode and buffer DMA mode of the controller is included. Signed-off-by:
-
Paul Zimmerman authored
The core code provides basic services for accessing and managing the DWC_otg hardware. These services are used by both the Host Controller Driver and (in future) the Peripheral Controller Driver. Signed-off-by:
-
- 11 Mar, 2013 25 commits
-
-
Ganesan Ramalingam authored
Add support for the Network Accelerator Engine on Netlogic XLR/XLS MIPS SoCs. The XLR/XLS NAE blocks can be configured as one 10G interface or four 1G interfaces. This driver supports blocks with 1G ports. Signed-off-by:
Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function anon_inode_getfile() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
-
Masanari Iida authored
Correct spelling typos in staging/comedi Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
Format the multi-line comments in the kernel CodingStyle. Signed-off-by:
-
H Hartley Sweeten authored
Remove all the unnecessary includes. Signed-off-by:
-
H Hartley Sweeten authored
The PCI device id is only used in the device table. Remove the define and just open code the device id. Signed-off-by:
-
H Hartley Sweeten authored
The (*insn_read) and (*insn_write) functions for all the subdevices in this driver are the same except for the 'offset' that is added to the iobase and channel to read/write a register on the board. Pass the 'offset' in s->private so we can use the same (*insn_read) and (*insn->write) functions for all the subdevices. Also, fix the (*insn_read) and (*insn_write) functions so they work correctly. The comedi core expects them to read/write insn->n data values and then return the number of values used. For aesthetic reasons, add some whitespace to the subdevice init. Remove the dev_info() noise at the end of the attach. Signed-off-by:
-
H Hartley Sweeten authored
The low-level i/o functions in this driver simply read/write a register based on the channel in insn->chanspec and an offset. Create a macro, PCI8164_AXIS(), that takes the channel number as a parameter and returns the register value. Remove the switch() statements used to figure out the 'axis_reg' and use the new macro instead. Signed-off-by:
-
H Hartley Sweeten authored
The dev_dbg() messages in the adl_pci8164_insn_{read,out} functions output the 'data' that was read/write to the device. Two 'data' values are always printed, data[0] and data[1]. The 'data' pointer points to an array of unsigned int values. The number of values in the array is indicated by insn->n. The number of data elements is never checked so the dev_dbg() could be trying to access a 'data' element that is invalid. Instead of fixing the dev_dbg() just remove them. They are really just added noise. Signed-off-by: -
H Hartley Sweeten authored
With the bus specific code split out, the device id in the boardinfo is no longer needed. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
The vendor/device ids in the boardinfo are not longer needed. Remove them. Signed-off-by:
-
H Hartley Sweeten authored
This driver only uses the boardinfo to get the dev->board_name. Just use the dev->driver->driver_name and remove the unnecessary boardinfo completely. Signed-off-by:
-
H Hartley Sweeten authored
Only one board type is supported by this driver. Remove the 'interrupt' field from the boardinfo and just call the function directly in v_ADDI_Interrupt(). Signed-off-by:
-
H Hartley Sweeten authored
All the users of the addi_common code now set the dev->board_ptr before calling addi_auto_attach(). Remove the unnecessary function that searches for the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. Set the dev->board_ptr before calling addi_auto_attach(). This removes the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. Set the dev->board_ptr before calling addi_auto_attach(). This removes the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. For aesthetic reasons, move the pci device table near the pci_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
The addi_apci_035, addi_apci_1500, addi_apci_1564, and addi_apci_3xxx drivers still use the addi_common code. Allow those drivers to set the dev->board_ptr before calling addi_auto_attach(). Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'devid' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Cleanup some of the comments to describe the usage of the 'context' in the (*auto_attach). Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the pci_driver declaration. Also, move the pci device table near the pci_driver. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by:
-
